CS Paper Radar

Co-PiLOT: Constrained Physics-Informed Latent Optimization for Target-Driven Inverse Design

Mahish K. Guru, Mayank Nagar, Ayush vyas, Jan Bohlen, Roland Aydin, Noomane Ben Khalifa

cs.AI cs.CE ·submitted 2026-09-29 15:51 UTC · v1

Abstract

Inverse design of physical systems (molecules, devices, microstructures) often reduces to optimizing a high-dimensional structure against an expensive black-box simulator. Direct search is difficult because the space is non-Euclidean, feasibility is hard to encode, and each evaluation is expensive. We present Co-PiLOT, a latent optimization approach that maps candidates through a generative encoder-decoder, uses the decoder as a learned validity prior, and searches the latent space with physics-informed black-box optimization. The framework is applied on the inverse design of magnesium alloy microstructure/texture. We develop a vision transformer based-encoder; paired with latent diffusion, diffusion transformer and rectified-flow transformer-based decoders on $\sim80{,}000$ EBSD-derived microstructure dataset to learn a minimal bottleneck, $z$. The ViT-FMDiT model ($z$=$768$) reconstructs high-fidelity microstructure images (FID $27.86$, MS-SSIM $0.178$), which our self-segmenting orientation codec converts into input grids for crystal plasticity solver. Finally, we introduce MERIDIAN, an active latent optimizer driven by deep-kernel Gaussian-process uncertainty, failure-aware feasibility prediction, manifold-aware trust regions, and target-aware acquisition. Within a budget of $160$ simulations, the ViT-FMDiT and MERIDIAN combination yields the best target-driven objective score, reducing the relative target error by $3$--$22\%$ against seven baselines (DANTE, TuRBO, BAxUS, CMA-ES, DDOM, SEIKO, DDPO) on the same decoder.

Closest papers

Nearest neighbours by meaning across the whole index.

Application of PDE emulators for a multi-material, multi-physics simulation problem

cs.LG ·2026-10-27 ·Diane Oyen, Morgan Jones, Adithan Kathirgamaraju, Abu Bucker Siddik, Alexander Most +17 more
published similarity 0.60
Abstract · Accepted at ICMLA 2026, Rochester, MI, USA

Machine learning (ML) architectures are being developed for fast emulation of numerical simulators to accelerate both scientific discovery and engineering design. While these approaches are well-tested on popular PDE (partial differential equation) benchmarks, it is necessary to evaluate their performance on datasets that more accurately reflect industrial and engineering applications. We evaluate several computer vision-based architectures trained as surrogate models on a challenging computational physics task involving multiple materials, revealing significant implementation challenges for adapting certain pre-trained models, including transformer-based architectures. For such multi-physics multi-material datasets, our results underscore the importance of learning algorithms designed for sparse and imbalanced data, techniques for adapting spatial encodings and physical consistency metrics, in addition to methods for reducing the cost of generating sufficient training data.

0.25

Scaling Transformer Energy-based Models For High Quality Image Synthesis

cs.LG cs.CV ·2026-10-22 ·Jungsoo Lee, Alexi Gladstone, Yilun Du
similarity 0.59
Abstract

Energy-Based Models (EBMs) are a flexible class of generative models that decouple probabilistic modeling from the generation process. This decoupling directly enables compositional generation and inference-time scaling, where sample quality can be refined simply by increasing sampling steps. However, severe challenges in high-dimensional sampling and training instabilities with deep architectures have restricted EBMs to low-dimensional regimes. To resolve these bottlenecks, we introduce the Transformer Energy-Based Model (TEM), a scalable transformer energy function operating entirely within a latent space. On top of this backbone, we extract energies at multiple layers and sum them, composing complementary constraints from local texture to global semantics. Furthermore, two components make this high-quality at scale: Positive Representation Alignment (PRA), which supervises TEM's intermediate representations with a vision foundation model, and advanced sampling strategies that improve sample quality at inference. TEM-XL achieves an FID-50K of 3.82 on class-conditional ImageNet 256$\times$256 without classifier-free guidance, showing that a contrastive EBM can generate high-fidelity images. On ImageNet 512$\times$512, TEM achieves an FID-50K of 8.24, demonstrating that the approach scales to higher resolution. We further validate the core promises of EBMs: compositional generation, zero-shot inpainting, and out-of-distribution detection.

0.14

ANaLOG: Anisotropic Native-Latent Operator Guidance for Solving Inverse Problems

eess.IV cs.CV ·2026-09-25 ·Darshan Thaker, Lachlan Ewen MacDonald, René Vidal
similarity 0.59
Abstract

Native-latent guidance is a recent paradigm for solving inverse problems with latent diffusion models. It replaces repeated evaluations of the image-space forward model, each requiring a decoder pass, with efficient guidance computed using a learned latent-space surrogate. However, existing methods apply guidance uniformly across latent dimensions, ignoring that measurements are informative only along certain directions and that the reliability of model predictions varies across inputs and timesteps. We propose ANaLOG, a framework for efficient uncertainty-aware guidance with pretrained latent diffusion models. ANaLOG models uncertainty by learning an anisotropic, input- and time-dependent covariance that is integrated into the guidance mechanism to emphasize reliable directions and downweight uncertain ones. We theoretically analyze this framework in a linear model setting and prove that anisotropic, uncertainty-aware weighting is necessary for correct sampling, whereas isotropic guidance induces sampling errors. Experiments across five challenging inverse problems show that ANaLOG improves perceptual reconstruction quality over existing methods while preserving efficiency.

0.23

Conditional Flow Matching for ML-Based Inverse Design Problems

cs.LG ·2026-09-01 ·Juliana Felder, Milad Habibi, Soheyl Massoudi, Mark Fuge
published similarity 0.59
Abstract · 13 pages, 2 figures, 6 tables. Accepted for presentation at EngOpt 2026

Engineering inverse design is often limited by the high computational cost of iterative solvers for optimization problems constrained by partial differential equations (PDEs) and by their sensitivity to initialization. Deep generative models can produce candidate designs without rerunning the simulator at inference time. Generative adversarial networks (GANs) sample in one forward pass, whereas diffusion models require iterative reverse-time integration. In this work, we add conditional flow matching (CFM) to EngiOpt and compare it with a conditional diffusion model and a conditional generative adversarial network (cGAN) on structural (beams2d) and thermal (heatconduction2d) benchmarks from EngiBench using the same downstream optimization protocol. We use cumulative optimality gap (COG) and final optimality gap (FOG) as the primary metrics for evaluating the generated designs as warm starts for gradient-based refinement. On the evaluated EngiOpt implementations and two EngiBench tasks, CFM achieves the lowest measured COG, FOG, maximum mean discrepancy (MMD), and volume-fraction deviation on both tasks. CFM has mean volume-fraction deviations of 0.4% and 1.0% on beams2d and heatconduction2d, respectively, compared with 3.8% and 11.2% for diffusion. At Euler s = 16, CFM achieves 53.2 samples/s on beams2d, about 66 times the measured throughput of the evaluated diffusion baseline using 1000 network evaluations under the same timing protocol, with COG 1.182 +/- 3.126, compared with 1.173 +/- 3.100 for Euler s = 32. Across the two tasks, CFM produces warm starts with lower measured COG than both baselines and uses fewer network evaluations than diffusion.

0.33

DiffGA: Steering Frozen Diffusion Models for Materials Design via Evolutionary Search

cs.LG cond-mat.mtrl-sci ·2026-10-10 ·Shivang Agarwal, Rodrigo Wang, Kevin Ryczko, Aayush R. Singh
similarity 0.58
Abstract

Steering candidate generation toward user-defined objectives is central to inverse materials design, yet remains difficult when objectives are black-box, changing, or non-differentiable, as in many simulation- and experiment-derived properties. Generative models offer a solution but typically require retraining or fine-tuning for each new objective, demanding labeled data and substantial compute, or rely on differentiable guidance that is brittle to gradient noise and undefined for many practical targets. We present DiffGA, a retraining-free framework that injects evolutionary search into the sampling trajectory of a retrained diffusion model, evolving partially denoised states under an arbitrary black-box oracle. Because oracle evaluation often dominates campaign cost, we couple DiffGA with an on-the-fly Bayesian surrogate that reuses representations from state-of-the-art machine-learned force fields (MLFFs). A Gaussian process is fit during the campaign on the force fields's graph embeddings and, once it demonstrably ranks an unseen generation, replaces expensive property evaluations under an uncertainty-aware acquisition rule, reducing oracle cost with negligible loss of accuracy. Across three crystal-design tasks using a frozen MatterGen backbone, DiffGA outperforms diffusion-only, compute-matched, purely evolutionary, and fine-tuned baselines in oracle-assessed rates of stable, unique, and novel hits. Rather than proposing scientific compounds, we use density functional theory to quantify MLFF oracle fidelity, showing that it is a faithful proxy in key regimes but systematically biased in others, delineating when proxy-driven generative discovery can be trusted. On a representative sample, DiffGA's top hits survive first principles re-evaluation as physically realistic hits, while the surrogate-accelerated pipeline preserves this fidelity at a fraction of the cost.

0.26

NAE: Normalizing AutoEncoder

cs.LG ·2026-08-12 ·Muhammad Abdur Rafae, Niels Landwehr
similarity 0.58
Abstract

We consider the setting of Normalizing flows with approximate inverses, an established paradigm spanning both full-dimensional ($d=D$) and bottleneck ($d<D$) settings, and group these models under the term flow autoencoders. We present a theoretical investigation into their training dynamics and prove that the proposed loss used by existing approaches is suboptimal; specifically, both encoder and decoder surrogates must be optimized in alignment with reconstruction loss. Guided by these insights, we propose Normalizing Autoencoder (NAE), which employs a novel conditional loss that aligns the surrogate loss gradient with that of reconstruction loss, directly improving upon the current standard. Extensive experiments across molecule generation, tabular data, and image benchmarks demonstrate that NAE achieves state of the art performance. Our work highlights the importance of loss alignment in flow autoencoders and establishes NAE as a powerful generative framework.

0.04

OCL-PDE: A Generative Framework for PDE Inverse Problems with Observation-Complementary Latents

cs.LG ·2026-10-05 ·Ding Yang, Chuqi Chen, Chang Ma, Yang Xiang
similarity 0.58
Abstract

Partial differential equation (PDE) inverse problems are often ill-posed, making fine-scale details difficult to recover. We address this problem by introducing a learned observation-complementary latent representation that preserves reconstruction-relevant information and is combined with the observation to reconstruct the unknown field. Building on this representation, we propose OCL-PDE, a generative framework that encourages the observation to guide large-scale structure and the latent to supply complementary fine-scale details. OCL-PDE is built on a physics-aware autoencoder (AE) and conditional Flow Matching, supporting inverse reconstruction as well as forward PDE prediction. Experiments demonstrate improved reconstruction accuracy and fine-detail recovery compared with the evaluated baselines.

0.10

Structured Visual Landscape: Generating Preferred Representations in Biological and Artificial Neural Networks

cs.CV cs.LGcs.NE ·2026-11-02 ·Yusong Zhao, Edgar Y. Walker, Hao Wang, Mi Lu
code/data similarity 0.58
Abstract

Understanding how neurons respond to visual stimulus is an important question in both deep learning and neuroscience. It has significant implications for enhancing the interpretability of black-box artificial neural networks and for understanding the visual representation in the human brain. We propose a structured visual representations landscape and design an activation-based prior that allows us to effectively regularize the landscape with activations from brain regions or neural network units. Our model Vis-Lens integrates a variational autoencoder and a diffusion model into an image generation framework. It enables the generation of natural, realistic preferred images by directly modifying the activation-regularized latent codes without per-image iterative optimization. We demonstrate the effectiveness of our framework on both artificial neural networks and human visual cortex using functional magnetic resonance imaging (fMRI) data. Our framework improves activation modulation and image realism compared with a recent state-of-the-art method for generating preferred visual representations of these neural targets. Code is available at https://github.com/NeuroAIHub/Vis-Lens.

0.36