CS Paper Radar

From Unity Simulation to Diffusion-Based Augmentation: Quantifying Dataset Balance for Robust Object Detection

Mohamed Benkedadra, Aissa Saoudi, Maxime Gloesener, Sidi Ahmed Mahmoudi, Matei Mancas

cs.CV cs.AI ·submitted 2026-09-29 16:58 UTC · v1
published

Abstract

Modern computer vision models achieve high accuracy when trained on large-scale annotated datasets. In critical domains such as construction safety monitoring, data collection is costly, hazardous, and ethically constrained. This paper presents a systematic study comparing two complementary data generation paradigms, (1) Unity Simulation-based rendering and (2) Controllable Diffusion-based generation (CIA), for object detection under real data-scarce conditions. A unified experimental framework enables controlled dataset mixing across real, simulated, and generative sources, while maintaining identical model and training settings. Quantitative evaluation using Precision, Recall, mAP, and custom $Δ$-metrics, reveals that neither simulation nor generative augmentation alone achieves optimal transferability. Unity-only training yields an mAP@0.5 drop of $-50\%$ relative to real data, while CIA-only training shows a milder $-16.5\%$ degradation. Hybrid compositions significantly improve performance, with the 90\% real + 10\% Unity configuration achieving the best overall mAP@0.5 of $62.68\%$ ($+7.64\%$ over baseline), and the 90\% real + 10\% CIA configuration maximizing precision at $74.45\%$. Results demonstrate that limited synthetic inclusion enhances generalization, while excessive substitution induces domain drift.

DOI
10.1145/3787256.3787261

Closest papers

Nearest neighbours by meaning across the whole index.

Domain shift-robust object detection with GenAI image editing

cs.CV ·2026-09-02 ·Isabel D. Stein, Thijs A. Eker, Sebastiaan P. Snel, Ella P. Fokkinga, Klamer Schutte +2 more
top venuetheory similarity 0.71
Abstract · Submitted to SPIE Sensors + Imaging 2026

Object detectors often degrade under domain shifts such as changes in lighting, weather, or occlusion. These shifts alter object appearance and expose a reliance on visual shortcuts learned from the training distribution that do not generalize across domains. Acquiring sufficient real-world samples to capture such domain variation is particularly difficult in specialized, low-data settings. Recent advances in diffusion-based generative image editing have shown promise for improving the in-domain performance of object detectors through synthetic data augmentation. However, their potential to improve out-of-domain robustness remains largely unexplored. We hypothesize that generative image editing can simulate a controlled domain shift in training data, effectively bridging the gap between source and target domains. To test this, we studied camouflaged military vehicle detection as a challenging domain shift scenario. Detectors trained on uncamouflaged data demonstrate substantial degradation on real test imagery containing foliage, netting, and multi-spectral camouflage across 15 vehicle classes in close-up, ground-level imagery. We used two diffusion-based editing models, Qwen Image Edit 2509 and Flux.2 Dev, to synthetically add camouflage to the training data, alongside a LoRA fine-tuned version of Qwen. A non-generative black-bar occlusion baseline served as a lower bound on augmentation quality. Using a GroundingDINO detector trained on real and synthetic data, generative camouflage augmentation yielded substantial mAP improvements for foliage (+20.1) and netting (+14.4) camouflage. Generating multi-spectral camouflage proved more challenging, but LoRA fine-tuning improved performance by 4.4 mAP over the uncamouflaged baseline.

0.44

Concentration, Not Uncertainty: Why Targeted Synthetic Data Doesn't Help Camouflaged Object Detection

cs.CV ·2026-10-07 ·Akshat Dobhal, Sanjay Singh
similarity 0.70
Abstract · 29 pages, 3 figures, 12 tables

Camouflaged object detection requires pixel-accurate masks, but obtaining such annotations is slow and costly, making synthetic training images an attractive alternative. Under a fixed generation budget, however, it remains unclear which real-image regions to target for synthetic data generation. We study an uncertainty-guided generation strategy that clusters the unlabelled real images, identifies clusters on which the model is least certain, allocates synthetic generation toward those clusters, and iteratively retrains the model. Across 103 training runs, uncertainty-based targeting does not outperform random allocation. Five independent controls further show that this null result is not an artifact: targeted training sets are measurably different from random sets, but the difference is explained by concentrating the generation budget rather than by where uncertainty is concentrated, as every concentration rule we test reproduces the effect and, on boundary accuracy, so does aiming at the clusters the model was most certain about. Separately, we find substantial data contamination in CHAMELEON, with 50 of its 76 images duplicated from training data despite the standard overlap check reporting zero overlap. Together, these results show that, under a fixed synthetic-data budget, budget concentration, not uncertainty-based targeting, accounts for the observed training-set effects.

0.18

Semantically-Guided Domain Randomization for Industrial Object Detection in Low-Image-Budget Regimes

cs.CV ·2026-09-22 ·Jose Moises Araya-Martinez, Gautham Mohan, Jens Lambrecht
benchmark similarity 0.69
Abstract

Retraining visual perception pipelines in High-Mix, Low-Volume (HMLV) automotive manufacturing must be carried out under tight annotation, energy, and time budgets, yet most Synthetic Data Generation (SDG) strategies still operate in the thousands of images. This work evaluates Semantically-Guided Domain Randomization (S-GDR), an annotation-free adaptation pipeline that couples Vision-Language Model (VLM)-based semantic captioning of a small unannotated real reference set with diffusion-based background synthesis (Stable Diffusion XL (SDXL) conditioned by ControlNet and IP-Adapter) and mask-based object composition. On an automotive multi-object detection benchmark and with a fixed budget of 200 synthetic training images, S-GDR reaches mAP50-95 = 0.739 on a real held-out test set, outperforming a domain-randomized render baseline (mAP50-95 = 0.697) as well as brightness filtering, perceptual hashing, CycleGAN style transfer, and unguided diffusion variants sharing the same 200-image budget. These initial observations position S-GDR as a promising annotation- free alternative for extreme data-scarcity regimes.

0.13

Diffuse the object, keep its label: curating detector training data from a few unlabeled photographs via VLM-built 3D vegetation scenes

cs.CV ·2026-08-10 ·Mario Malizia, Marnix Enting, Rob Haelterman, Ken Hasselmann
publishedbenchmark similarity 0.69
Abstract · Accepted at the Curated Data for Efficient Learning (CDEL) Workshop @ ECCV 2026

Labeled images of small objects hidden in vegetation are scarce, and detectors trained on them generalize poorly across sites. Rather than reusing labels collected at another site, we synthesize labeled training images from a handful of unlabeled photographs of the deployment site itself. A vision--language model generates a coarse 3D vegetation scene from one photograph; placing 3D object meshes in the scene yields bounding boxes, segmentation masks, and per-instance occlusion directly from the scene geometry, without manual annotation. A lightweight adapter fine-tuned on the photographs conditions a diffusion pass that re-textures the renders, and a graded mask-lock sets how much diffusion may touch the object itself. In our runs this grade was the most influential curation choice: lightly diffusing the object improves minority-class recall over fully protecting its pixels, while unrestricted diffusion dissolves it. Trained on these images, a standard detector matched or exceeded its counterpart trained on a larger labeled dataset of real images from a different site, consistently across seeds on a humanitarian-demining benchmark; the comparison is thus unsupervised site adaptation from a handful of photographs against conventional cross-site label reuse. In our ablations the gains were largely insensitive to the photograph and crop budgets, and in-domain accuracy did not predict cross-site performance.

0.50

Curating Synthetic Data for Task-Specific Visual Perception

cs.CV ·2026-09-29 ·Saptarshi Neil Sinha, Paul Julius Kühn, Michael Weinmann
publishedposition similarity 0.68
Abstract

Synthetic data are most valuable where general-purpose datasets cannot provide the domain-specific priors a task requires, and where manual annotation is expensive, imprecise, or infeasible. In this article we argue that the central question for specialized vision systems is not how to generate more data, but which data to generate. We therefore discuss curated synthetic data, whose scene content, appearance variations, sensing characteristics, and annotations are deliberately designed around a given task. We examine three complementary curation paradigms. Procedural rendering offers explicit control over scene parameters and the annotations follow by construction. Physically-based simulation encodes the mechanism behind an observed effect and yields exactly aligned supervision pairs. Generative AI learns sensor-specific appearance from small real seed sets and attains plausible realism, though it remains prone to hallucination and to inaccurate annotation. These paradigms are illustrated with examples from industrial surface defect detection, restoration of degraded digitized autochrome plates, and 6DoF pose estimation from RGB and event data. Using these examples, we analyze different data regimes and training strategies that combine synthetic and real data across these paradigms. We conclude that curated synthetic data are best understood as a complement to real observations, and that hybrid pipelines combining controllable supervision with learned appearance are the most promising direction for reliable sim-to-real transfer.

0.37

Learning-State-Aware Dynamic Generative Data Augmentation on Small-Scale Datasets

cs.CV cs.AI ·2026-08-19 ·Ting Xiang, Chenxi Deng, Jinhui Zhao, Bingting Jiang, Ke Zhang +2 more
similarity 0.67
Abstract

Small-scale image classification is often limited by the scarcity of training data. Generative data augmentation (GDA) based on pretrained generative models has emerged as an effective solution. However, existing methods rely on task-agnostic augmentation strategies that overlook downstream model needs. Although recent dynamic GDA methods incorporate model feedback to guide augmentation, they still struggle to reliably determine sample-specific augmentation strengths and adapt augmentation strategies to different image regions while balancing image diversity and class semantics. To address these issues, we propose learning-state-aware dynamic generative data augmentation (LSADA). Specifically, LSADA constructs a learning state for each sample based on its current loss and loss-decrease rate, which is then mapped to a sample-specific augmentation strength. Furthermore, LSADA introduces a decoupled data augmentation and diffusion fusion strategy that applies strength-controlled transformations to class-relevant regions and generates diverse class-irrelevant regions, progressively fusing them to improve image diversity while preserving class semantics. Experiments on nine public datasets show that LSADA outperforms the existing SOTA dynamic GDA method by an average of 4.5% on six natural image datasets and 2.5% on three medical image datasets.

0.15

Augmentron: Scalable Multi-View Visual Augmentation for Robot Learning

cs.LG cs.RO ·2026-11-06 ·Tanay Tandon, Aseem Doriwala, Jade Choghari, Catherine Weaver, Pragna Mannam
published similarity 0.67
Abstract · Accepted to the 8th Robot Learning Workshop (WRL), NeurIPS 2026

Robot policies trained on visually narrow demonstrations can become sensitive to environmental features that are unrelated to the task. Existing generative augmentation methods can introduce visual diversity, but processing every frame and camera view independently is computationally expensive and may produce inconsistent observations across cameras and timestamps. We introduce Augmentron, a geometry-aware pipeline that generates reusable scene representations and renders them through recorded camera poses. This produces temporally and multi-view consistent environ- ment and workspace variations while preserving the robot, task objects, actions, and annotations. Across three physical manipulation tasks, replacing half of the real world training dataset with Augmentron data improves model success across three tasks for both in out-of-distribution distractor objects, and out-of-distribution workspace variation evaluations. In a separate comparison against alternate augmentation techniques, Augmentron achieves the highest pooled success in all three conditions. The results show that introducing augmented data to a data training recipe can help policies generalize to dynamic real-world settings.

0.21

Fear of Memorizing Objects: End-to-End Zero-Shot Model-Based Object Detection

cs.CV ·2026-11-11 ·Leon Greiner, Wout Boerdijk, Junwen Huang, Benjamin Busam, Rudolph Triebel +1 more
similarity 0.66
Abstract

This paper presents FOMO (Fear of Memorizing Objects), an end-to-end trainable transformer-based architecture for zero-shot model-based object detection. Existing approaches typically follow a proposal-and-match pipeline: target-agnostic mask proposals are generated and then matched to template features in a set of loosely coupled stages, making them susceptible to fragmented proposals in clutter and degraded matching under occlusions. FOMO elegantly replaces this paradigm by injecting object template information early in the detection pipeline: Bidirectional attention between learnable latent tokens, multi-view CAD templates, and query image features produces object-aware image features and conditioned queries which are subsequently decoded into bounding-box and confidence predictions. We train FOMO on Clutter6D, a novel large-scale synthetic dataset with over 500k images featuring more than 10k diverse object models rendered in highly cluttered scenes with multiple instances and varying occlusion levels, which addresses the limited object diversity and lack of realistic dense clutter in existing datasets for training zero-shot multi-instance algorithms. In true zero-shot fashion, FOMO achieves 54.2 mAP on BOP-Classic-Core at 0.23 s per image, ranking second overall with 3.8 pp difference to the top method while being more than 7x faster. Throughout comprehensive ablation studies we investigate and verify architectural design choices.

0.17