CS Paper Radar

CADeT: Causal-Aware Deformation Transmission for Indirect Robotic Manipulation of Soft Tissue

Junlei Hu, Dominic Jones, Pietro Valdastri

cs.RO ·submitted 2026-09-29 20:11 UTC · v1

Abstract

Indirect manipulation of deep-seated deformable anatomy inaccessible to the robot is challenging in robot-assisted minimally invasive surgery (RAMIS) because intervening tissues spatially filter deformation transmission. Passive observations can be ambiguous because the Decoupled and Blocked modes may produce similar motion responses. We propose CADeT, a causal-aware deformation transmission framework that integrates structural causal model (SCM) with active sensing to infer a latent transmission mode and estimate a state-dependent adhesion Jacobian online. During normal manipulation, control actions update the mode belief; when ambiguity persists, an additional probing action is selected to improve mode distinguishability. The mode belief and learned Jacobian are incorporated into a belief-aware model predictive controller for indirect target-shape control. Validation in simulation and on the da Vinci research kit (dVRK), using phantom and ex vivo porcine tissues, shows higher mode-identification accuracy and faster shape-error convergence than the evaluated model-free and model-based baselines. These results show that active sensing improves mode identification and indirect deformation control under the evaluated conditions.

Closest papers

Nearest neighbours by meaning across the whole index.

Robotic Optical Coherence Tomography-Guided Geometric Modeling of Soft Tissue: 3D Representations for Data-Driven Closed-Loop Shape Control

cs.RO ·2026-10-23 ·Chaoyu Zhang, Guangshen Ma, Mark Draelos
similarity 0.61
Abstract · 30 pages, 18 figures

In medical robotics, data-driven soft-tissue shape control requires deforming tissue toward desired morphologies through sequential physical interactions. This challenge is particularly important in microscale manipulation, where localized deformation is difficult to observe, represent, and control, while physics-based models can be computationally expensive and difficult to adapt to realistic environments. Optical coherence tomography (OCT) provides high-resolution volumetric perception of tissue deformation, but target-conditioned control requires effective representations of both observed and desired tissue states. In this work, we introduce an OCT-guided data-driven framework for tissue shape control, learned from user-guided demonstrations and executed with closed-loop OCT feedback. We study full-volume, tissue-masked sparse-volume, and voxelized point-cloud representations, with or without residual conditioning, using deterministic (Explicit) and generative diffusion (Diffusion) policies. Across 12 configurations and 576 phantom rollouts on 3-DoF depth and 6-DoF directional tasks, OCT-derived 3D representations support both Explicit and Diffusion policies, with performance depending on representation and residual conditioning. Residual conditioning reduces directional Shape RMSE from 0.748 to 0.555 mm for full-volume Diffusion, while voxelized point-cloud Explicit with residuals achieves 0.534 mm for depth and 0.443 mm for directional control, with comparable accuracy at intermediate unseen targets and consistent performance across deployments. We further evaluate the framework in 60 ex vivo porcine rollouts, extending to biological tissue with final geometric errors comparable to human demonstrations. These results establish volumetric OCT as current and goal representations for learned closed-loop tissue shape control across deterministic and generative action models.

0.07

A Tutorial on Shape Servoing of Deformable Objects-Part I: Fundamentals

cs.RO eess.SY ·2026-10-29 ·Ignacio Cuiral-Zueco, Alessio Caporali, Miguel Aranda, Gianluca Palli, Gonzalo López-Nicolás +1 more
code/data similarity 0.60
Abstract · Part I of a two-part tutorial. 9 pages, 5 figures. Code: https://github.com/nachocz/tutorial_on_shape_servoing_of_deformable_objects. Intera…

In robotics, shape control (or shape servoing) refers to the automatic manipulation of a deformable object to achieve a desired shape. It involves a feedback loop that exploits the relation between robot motion and changes in the measured shape. This relation, known as the interaction Jacobian or, in this context, the deformation Jacobian, depends on the object's mechanical properties, geometry, and boundary conditions (e.g., where the object is grasped). Because these factors are often difficult to model accurately, the deformation Jacobian can be estimated locally from observed shape changes produced by commanded robot motions, without requiring a fine-tuned mechanical model. This article is the first of a two-part tutorial on data-driven Jacobian-based shape control of deformable objects. It introduces the central elements of the approach: the formulation of the shape-control problem, shape representation, estimation and online update of the deformation Jacobian, and a standard control law from the literature. It then assembles these elements into a complete shape-servoing loop, derives a local stability condition for this loop, and illustrates why some target shapes cannot be reached. Part II covers more advanced topics. Throughout both parts, a simulated planar example in which two robot arms manipulate an elastic rod observed by a camera illustrates the concepts.

0.42

A VR Training System for Robot-Assisted Vascular Intervention with Dual-Mode Control and Model-Based Interaction Response

cs.RO ·2026-10-14 ·Yining Shang, Shuxiang Guo, Sheng Cao, Pengcheng Li, Bin Wang +1 more
similarity 0.60
Abstract · 8 pages, 7 figures, submitted to a IEEE journal

Virtual reality training for robot-assisted vascular intervention requires accurate robotic control and effective feedback on guidewire--vessel interactions. This paper presents a VR training system combining asynchronous dual-mode command mapping with sensorless interaction estimation. The system supports velocity-controlled navigation and position-driven incremental manipulation. Guidewire deformation and a Hunt--Crossley-type contact response are combined and temporally filtered to estimate interaction intensity, while trajectory-based visualization supports post-procedure review. Tests confirmed distinct command-dispatch patterns across three velocity gears and the position mode. During hybrid-scene navigation, the estimated response remained low during straight insertion and increased as the guidewire bent within the vascular model. Trajectory analysis yielded a model-derived cumulative trauma work (CTW) value of 15.166 in normalized units and localized regions of elevated interaction. In a preliminary study with 15 novices, physical-phantom task success increased from 53.3% to 93.3% after VR training, while mean completion time decreased from 132.4 s to 96.7 s. These results demonstrate the system's dual-mode operation, deformation-sensitive feedback, and potential to improve subsequent physical-phantom task performance.

0.28

Observation-Referenced Tissue Deformation Forecasting with Tool-Driven and Residual Dynamics

cs.RO ·2026-10-09 ·Tom Olesch, Nan Xiao, Xiongye Xiao, Jonathan C. DeLong, Fei Liu
similarity 0.59
Abstract · 8 pages, 6 figures, 1 table. Submitted to ICRA 2027

Forecasting tissue deformation from future instrument motion could support predictive planning and increasingly autonomous surgical systems. We study this problem using a scene-specific differentiable surface model fitted to an observed tool-tissue interaction window. Rather than forecasting absolute simulated positions, we introduce an \textit{observation-referenced} formulation that anchors each tissue point to its last valid observation and adds only the deformation induced by the known, preplanned future tool trajectory. This reduces sensitivity to reconstruction, initialization, and persistent simulation offsets while preserving the predicted deformation response. The physical model uses differentiable, mesh-free position-based dynamics with scene-specific rigidity, attachment, region scale, and grasp coupling. We further introduce an optional \textit{observation-referenced residual model} combining graph-spectral spatial modes with periodic harmonic dynamics for structured motion not explained by the tool input. We evaluate the framework retrospectively on 12 surgical manipulation clips from three datasets. Observation referencing provides the largest gain, with a median within-clip error ratio of $0.598$ relative to the corresponding absolute simulation forecast. The optional periodic residual further improves forecasting when the remaining motion exhibits periodic structure. These results support observation-referenced deformation prediction as a practical building block for future surgical world models, digital twins, and generative simulators that must predict how tissue evolves under instrument actions.

0.23

SurgCast: Action-Conditioned Future Skeletons for Controllable Surgical World Models

cs.CV ·2026-10-11 ·Wanhao Liu, Rulin Zhou, Liangjing Shao, Zhaocheng Lin, Dongyue Li +7 more
similarity 0.59
Abstract · 9 pages, 7 figures

Surgical world models must turn prospective robot actions into visually faithful, structurally consistent instrument motion. We introduce SurgCast, which predicts future instrument skeletons from current structure, robot state, and future actions, then uses the forecast to control video generation. Dual-path injection combines skeleton geometry with derived, instrument-specific motion descriptors through geometric residuals and conditioning modulation. Both paths complement native action conditioning and are retained in a four-step causal student. On SutureBot and SRTH-Porcine-Cholei, the teacher and student improve all seven reported quality and instrument-consistency metrics over their respective direct-action baselines; teacher FVD decreases by 37.6% and 67.3%. Ablations show that future actions improve skeleton prediction and that combining both injection paths performs best across all six metrics under predicted skeletons. These results support using predicted articulated structure and its motion semantics as a control interface for surgical video prediction. Project videos and examples are available at https://surgcast.netlify.app/.

0.28

Learning a Resolution-Consistent Jacobian Field for Bio-Inspired Rigid-Soft Finger

cs.RO ·2026-10-01 ·Tianyou Liang, Haisen Zeng, Shanjun Chen, YiMing Zhu, Zhongyue Lu +1 more
similarity 0.59
Abstract · 27 pages, 8 figures, including supplementary material. Under review at Robotics and Autonomous Systems

Bio-inspired tendon-driven rigid-soft coupled dexterous fingers exhibit strong nonlinearity and configuration-dependent sensitivity, making accurate modeling challenging. In discrete-time control, Jacobian-based kinematic algorithms typically rely on point-wise local linear approximations, which makes their performance sensitive to sensor sampling frequency and controller update frequency. To address this issue, we propose Jacobian Flow Matching (JFM), a structured learning framework based on Conditional Flow Matching (CFM), to learn a resolution-consistent Jacobian field that models actuation-to-motion transitions as a dynamical flow. The proposed framework supports both single-step prediction and continuous rollout via ODE integration, enabling consistent inference across temporal resolutions. Experiments on a tendon-driven rigid-soft finger show that the proposed method suppresses outlier errors and improves single-step prediction accuracy, reducing the global average RMSE by over 53% compared with a baseline discrete Jacobian learning approach. For long-horizon prediction, trajectories recovered via ODE integration achieve higher fidelity under sparse sampling (Stride = 8), reducing the RMSE median by 14.43% and the error variance by 24.87%. These results demonstrate that the learned flow-based Jacobian field provides an effective local model for offline multi-step trajectory optimization in rigid-soft coupled nonlinear systems.

0.21

Generalizing Soft Tissue Deformation and Force Prediction Across Material Stiffness and Geometry

cs.AI cs.CGcs.CV ·2026-08-21 ·Madina Kojanazarova, Sidaty El Hadramy, Philippe C. Cattin
similarity 0.58
Abstract

Accurate soft tissue simulation is essential for surgical training, pre-operative planning, and haptic feedback systems. While learning-based surrogate models trained on data using the finite element method (FEM) offer a promising path to real-time inference, their reliability depends on well-calibrated constitutive models. Existing approaches neither provide systematic guidance on model selection across stiffness levels, nor generalize across different tissue stiffnesses or geometries. We perform a comprehensive calibration of hyperelastic constitutive models in the SOFA Framework using gravity-loaded silicone beams with different stiffnesses. Using calibrated simulations as training data, we use a softness conditioned equivariant graph neural network, enabling deformation and force prediction across multiple tissue types and unseen geometries. Our model achieves sub-millimeter mean deformation accuracy at 0.010s inference time, while showing that force prediction quality is directly tied to upstream calibration consistency.

0.31

DexTouch-WM: Learning Action-Conditioned Tactile World Models from Human Touch for Dexterous Robot Manipulation

cs.RO cs.CV ·2026-09-17 ·Yan Qin, Yue Chen, Wenwei Lin, Shujia Liu, Chuqiao Lyu +7 more
publishedhighly cited similarity 0.56
Abstract · Accept to IROS 2026 Workshop RoBoWoMo (Lightning Talk)

Learning predictive models of contact-rich dexterous manipulation requires dense tactile interaction, but such data are costly to scale on real robots and remain tied to embodiment-specific sensors. We introduce DexTouch-WM, an action-conditioned world model that learns from scalable human touch to jointly predict future RGB observations and bilateral tactile dynamics. Our insight is that human and robot manipulation share transferable contact dynamics when their tactile observations and action spaces are made compatible. We deploy flexible piezoresistive arrays with a shared sensing layout on both human and dexterous robot hands, and retarget human motion into the robot action space so that human interaction can supervise the same dynamics model used for real-robot prediction. DexTouch-WM couples a pretrained video expert with a lightweight tactile expert using anatomy-aware tactile tokens and aligned action conditioning. In human-to-robot scaling experiments, we keep five hours of real-robot supervision fixed while increasing human interaction from 0 to 100 hours, and observe substantial improvements in held-out robot-domain visual, geometric, and contact prediction despite disjoint human and robot task sets. Beyond prediction, we evaluate the world models as surrogate environments for policy evaluation and as generators of synthetic trajectories for real-robot policy learning, showing that scalable human interaction provides a complementary data axis for learning dexterous robot world models.

0.52