CS Paper Radar

EmbodiRSI: Recursive Self-Improvement for Data-Efficient Robot Adaptation

Haoran Lang, Haotao Lu, Shiyu Sang, Haoyang Luo, Guo Chen, Qun Li, Jingyi Yu, Ye Shi, Jingya Wang

cs.RO ·submitted 2026-09-30 03:54 UTC · v4
highly cited

Abstract

Adapting robot manipulation policies to new tasks and environments remains highly data-intensive, while the data needed for further improvement depends on the policy's current capabilities and failure modes. We introduce EmbodiRSI, an agentic system for recursive self-improvement (RSI) in a real-to-sim-to-real setting, where task-specific simulations are constructed from target deployment scenarios and used as low-cost environments for iterative policy improvement before transfer back to the physical world. EmbodiRSI uses policy execution feedback to guide subsequent experience acquisition and policy updates. Two complementary mechanisms close this loop: Collaborative Error Correction generates agent-assisted corrective trajectories from policy-reached states, while Adaptive Data Collection directs expert demonstration generation toward the current policy's weaknesses. The task-specific simulation serves as a reusable workspace for policy warm-up, repeatable evaluation, failure diagnosis, and targeted data generation across successive RSI rounds. Across three tabletop environments and 14 subtasks, EmbodiRSI increases scene-balanced autonomous simulation success from 50.4% to 83.5% over two RSI updates. With 400 adaptive simulated trajectories and only ten real-world refinement trajectories per subtask, EmbodiRSI achieves 83.1% scene-balanced autonomous real-world success, compared with 75.0% for adaptation using 200 real-world demonstrations per subtask. These results demonstrate that feedback-driven recursive improvement in deployment-specific simulations can enable data-efficient adaptation of embodied policies to physical environments.

Closest papers

Nearest neighbours by meaning across the whole index.

RoboDoctor: Training-Free Recursive Self-Improvement for Robot Policies

cs.RO cs.CV ·2026-10-26 ·Heyang Yu, Haomin Li, Sihang Li, Jixin Yan, Shiyun Peng +5 more
code/data similarity 0.80
Abstract · Project Page: https://robodoctor-rsi.github.io/

Generalist robot policies and language-model agents provide complementary capabilities, but completing a task also requires adapting their use to the consequences of physical interaction. We study execution as a locus of adaptation: feedback guides the current action and supplies evidence for revising subsequent decisions under fixed model weights. We introduce RoboDoctor, a training-free framework that connects diagnosis, grounded action, and persistent experience across three revision targets. The harness allocates control between policy and agent; intervention determines when to assist while preserving useful policy behavior; and operation refines physical methods through observed effects. Linked experience records retain the reason for a decision, the attempted method, its outcome, and conditions for reuse. On a curated archive of 54 RoboDojo-Sim task entries, RoboDoctor achieves a five-dimension mean score of 57.10, with a native success rate of 49.44%. Recorded interactions illustrate strategy changes, selective correction, and grasp revision. These findings characterize execution-time adaptation in the evaluated system; controlled trials remain necessary to isolate the contribution of cross-episode experience.

0.50

REVOLVE: An Automated Closed-Loop Framework for Evolving Robot Manipulation with Minimal Human Intervention

cs.RO ·2026-09-13 ·Hanyu Liu, Qian Li, Yizhu Ding, Jiayi Wen, Keqiang Ren +6 more
similarity 0.79
Abstract

Recent advances in data-driven robot manipulation policies have substantially improved task execution and generalization. However, real-world deployment still relies heavily on humans for failure assessment, correction, and environment reset, while models often fail to continually learn from failures and corrective experience. We present REVOLVE (Robot Evolving via Orchestrated Loops, Verification, and Experience), an automated closed-loop framework for evolving robot manipulation with minimal human intervention. Built on a unified software platform, REVOLVE integrates data collection, policy training and deployment, failure recovery, and continual learning into a single closed-loop workflow. Its Automated Reset and Correction (ARC) architecture automatically resets the environment and intervenes to correct policy failures. Dual-Loop Evolution (DLE) continually improves the manipulation policy and agent by feeding real-world interaction and failure--correction data back into policy learning and using an external mismatch memory to refine agent judgments. Experiments across four real-world manipulation tasks show that, after five iterations, REVOLVE improves average policy success rate by 18.5% and agent judgment accuracy by 8.5%, while reducing human effort in data collection and deployment testing by 94.4% and 95.1%, respectively. These results demonstrate that REVOLVE transforms real-world deployment into a closed-loop learning process that continually accumulates and uses execution experience, enabling continual evolution of both the policy and supervisory model with substantially less human intervention.

0.14

SimPT: An Automated Simulation Framework for Intervention-Based VLA Post-Training

cs.RO ·2026-10-21 ·Caicheng Wang, Zipeng Ye, Zhexuan Zhou, Zilong Huang, Xi Zhang +1 more
similarity 0.76
Abstract · 11 pages, 6 figures

Human-in-the-loop (HIL) post-training improves vision-language-action (VLA) policies through expert corrections, but costly human supervision and repeated real-robot evaluation limit algorithm exploration and development. We introduce SimPT (Simulation-based Post-Training), a simulation framework that automates intervention-based VLA post-training by integrating policy rollouts, corrective data collection, policy training, and standalone evaluation. To automatically determine intervention timing and recovery strategies, we develop an Agent-Compiled Progress Graph that tracks task progress using privileged simulator state and retains stable snapshots during policy execution. After a rollout fails, a CuRobo-based expert attempts recovery from these snapshots, starting at more advanced task stages and falling back to earlier ones as needed to generate corrective trajectories. We implement and compare four post-training methods, RECAP, HG-DAgger, DPO+SFT, and FlowPRO, across seven RoboTwin manipulation tasks. Relative to a fixed-interval snapshot baseline, the Progress Graph reduces recovery attempts by 75.0% and increases recovery success from 93.4% to 98.9%. Using SimPT, we develop RECAP-CF-LPF, a refinement of RECAP that combines cross-fitting and low-pass filtering of value predictions. This refinement increases the overall success rate from 76.50% to 79.36% in held-out simulation trials. In real-robot HIL post-training, it increases the success rate from 72% to 96% across 25 scenarios of an Ethernet cable-insertion task. These results demonstrate the utility of SimPT for exploring and developing VLA post-training algorithms.

0.19

Learning and Transferring Closed-Loop Robot Software

cs.RO cs.AI ·2026-09-17 ·So Kuroki, Kento Kawaharazuka, Yujin Tang
highly cited similarity 0.75
Abstract

Closed-loop robot policies require observation processing, state management, and situation-dependent branching, making them costly to design and tune manually. Although coding agents increasingly support control-code generation and optimization, it remains unclear whether implementations improved on source tasks also support policy acquisition for new tasks. We study this question by treating complete closed-loop implementations as reusable execution experience. To learn each source policy, a coding agent generates policy code from a few successful demonstrations and iteratively improves it using simulation feedback. The validation-selected implementations are retained in a software archive. To transfer the acquired software to new tasks, the agent generates and improves policies using archived implementations, target demonstrations, and execution feedback. We evaluate policy learning and its relationship to cross-task transfer. For learning, across four source tasks in RoboCasa, iterative optimization increases the success rate from 28.3% with initially generated policy code to 64.2% with validation-selected policy code. We further validate this learning approach on a physical Unitree G1. For transfer, across nine additional target tasks in RoboCasa, success rates are 45.2% without references, 41.5% using initially generated policy code from source tasks, and 57.0% using their validation-selected policy code. These results show that improving source-task code also improves learning on new tasks.

0.40

ARSTAG: An Agentic Real2Sim2Real System for Task-Specific Robot Data Generation

cs.RO ·2026-09-21 ·Bowei Li, Yuner Zhang, Changliu Liu
similarity 0.75
Abstract · 12 pages, 15 figures and tables. Project webpage: https://boweili666.github.io/ARSTAG/

Adapting visuomotor policies to new manipulation tasks often requires substantial manual engineering or teleoperated data collection. Simulation can provide task-specific data at scale, but constructing the scene, designing expert behavior, and configuring data generation still require significant per-task effort. We present ARSTAG, an agentic Real2Sim2Real system that turns a single RGB image and a natural-language instruction directly into robot policy-learning data. A hierarchy of language agents constructs a task-scoped simulation scene, generates robot-feasible demonstrations, and expands the training distribution through task-consistent randomization, while a coordinator agent manages cross-stage feedback and recovery. Across seven manipulation tasks spanning grasping, placement, and stacking, the ARSTAG-generated demonstrations enable sim-to-real transfer of three visuomotor policy architectures to a dual-arm robot, with pi0.5 achieving an average real-world success rate of 74.6%. Ablations show that task-consistent randomization substantially improves robustness, and policy performance increases with generated dataset size. Project webpage: https://boweili666.github.io/ARSTAG/.

0.52

F4R: Failure-Driven Recognition, Reconstruction, Refinement, and Redeployment for Continual Robot Self-Improvement

cs.RO cs.AI ·2026-09-28 ·Zhuoyuan Yu, Jiacheng Wang, Tianle Liu, Yihua Ren, Peng Yu +11 more
similarity 0.75
Abstract

The real-world performance of current vision-language-action models is fundamentally constrained by the limited coverage of expert demonstrations and their insufficient understanding of physical interactions. A common remedy is to collect additional real-world demonstrations of newly encountered failures. However, this process is costly, inefficient, potentially unsafe, and difficult to scale. To address this challenge, we propose Failure for Rising (F4R), a failure-driven real-to-sim-to-real closed-loop learning framework that converts real-world failures into targeted policy improvement. F4R first uses an agent to automatically identify and diagnose failures from rollouts. It reconstructs each failure as an interactive, object-centric table-top environment that preserves the task-relevant spatial and physical conditions. The policy is then refined through failure-conditioned sim-real co-training followed by targeted reinforcement learning in the reconstructed environments. The improved policy is subsequently redeployed, while newly observed failures are continuously fed back into the next reconstruction and learning cycle. Real-world evaluations on four manipulation tasks show that F4R achieves 93.75% In-Distribution and 90.0% Out-of-Distribution (OOD) success, outperforming the budget-matched Targeted BC baseline by 18.75 percentage points under OOD conditions without collecting additional real-world corrective demonstrations.

0.40

ReTrace: Cross-Stage Failure Attribution for Self-Improving Robotic Manipulation

cs.RO ·2026-10-11 ·Yue Yu, Bin Zhu, Junhui Li, Jiayu Wang, Shijie Zhou +1 more
similarity 0.75
Abstract

General-purpose multimodal foundation models are increasingly capable of directly controlling robots, yet improving their manipulation capabilities through autonomous interaction remains challenging. A key challenge to such self-improvement is learning from failures in complex manipulation tasks involving cross-stage dependencies, where an action may succeed locally but cause a later stage to fail. To address this challenge, we introduce ReTrace, a self-improvement framework for robotic manipulation through autonomous physical interaction and retrospective reasoning, without provided demonstrations or model-parameter updates. ReTrace retrospectively traces downstream failures to earlier decisions, proposes targeted corrections, and evaluates them through subsequent interactions. Across attempts, ReTrace progressively consolidates validated corrections into a reusable manipulation skill that guide subsequent execution. We evaluate ReTrace on four real-world manipulation tasks using a Franka Research 3 robot. On the two tasks with strong cross-stage dependencies, GPT-6 Astra-low improves from 0% to 80% success on plug insertion and from 0% to 100% on ball pouring, while GPT-6 Sol-xhigh improves from 0% to 10% and 0% to 90%, respectively. The learned skills also transfer across model and reasoning configurations and reduce inference-time decision cost in most evaluated settings.

0.40

Compounding Physical RSI: Turning Execution Failure into Inherited Capability

cs.RO ·2026-11-04 ·Yixuan Yang, Qiang Chen, Run Shao, Shuwei Dong, Wenhao Li +29 more
benchmark similarity 0.75
Abstract

Generalist robot policies are trained on static offline datasets, yet physical manipulation unfolds sequentially across stages. Because a weakness in a downstream stage remains unobservable until the policy passes earlier ones, each resolved bottleneck exposes the next hidden failure mode. This staged structure calls for Recursive Self-Improvement (RSI), in which a policy iteratively executes, diagnoses failures, and updates itself. Moreover, because task completion behaves like a product of stage-level pass rates, recursive gains can multiply across generations. In physical environments, three bottlenecks obstruct compounding: terminal execution feedback rarely localizes the stage that caused a failure, failed trajectories do not supply the corrective action, and updating shared parameters can degrade previously mastered skills. We propose Compounding Physical RSI, a self-evolving policy framework that turns execution failures into heritable capability. First, automated capability-gap assessment traces failed rollouts to the task stage where progression breaks down and formulates a structured improvement objective. Second, conditioned on this objective, our remedy stage curates validated, stage-relevant experience and refines the policy via behavior-regularized offline reinforcement learning, without requiring costly online rollouts at each optimization step. Third, to safeguard existing skills, our retention stage constructs weight-space candidates between the inherited reference policy and the refined policy, evaluates them across the task suite, and promotes the best candidate as the reference state for the next generation. Evaluated across all 42 tasks of the RoboDojo-Sim benchmark, CSU-AI-07 ranks first on the leaderboard with a three-seed mean Overall Score of 26.15 and Success Rate of 20.70%, outperforming the next-best entry by 5.92 points and 5.82 percentage points.

0.05