CS Paper Radar

DensePed-Lite: Quality-Aware Adaptive Detection for Dense Pedestrians under Occlusion

ZiAn Wang, MingZhe Liu, Chaoyi Guo, ChangChun Li, Fangming Gu

cs.CV ·submitted 2026-09-30 10:31 UTC · v1
published

Abstract

Pedestrian detection plays a crucial role in computer vision with applications in autonomous driving, surveillance, and public safety. However, real-world dense scenes bring severe challenges, including heavy occlusion, drastic scale variations, and strict real-time requirements. Existing lightweight detectors struggle to balance accuracy and efficiency while often neglecting quality-aware feature modeling and consistency between classification and localization, leading to unstable performance under crowded conditions. To address these issues, we propose DensePed-Lite, a unified framework built on a single principle: under occlusion the network should adapt its behavior to the quality of what it observes rather than assume complete information. This principle is realized at three points where occlusion does the most damage: unreliable confidence scoring (UQE), fragmented spatial coverage (MPSC), and incoherent multi-scale fusion (CTDM). The three mechanisms reinforce one another instead of acting in isolation, all without significantly increasing complexity. Experiments on CityPersons and CrowdHuman validate that DensePed-Lite achieves a superior accuracy-efficiency trade-off compared with recent state-of-the-art lightweight methods, making it suitable for real-time deployment in dense pedestrian scenarios.

Comment
Accepted at WISE 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Contour-Guided Spectral Routing for Robust Real-Time Pedestrian Detection

cs.CV ·2026-09-13 ·Sam Williams, Yuan Xiang
similarity 0.72
Abstract

Real-time pedestrian detection in driving scenes is constrained by three coupled failure modes: tiny targets lose discriminative evidence, occlusion weakens geometric support, and weather or illumination changes distort appearance statistics. We formulate the detector through a unified \emph{contour-guided spectral routing} view rather than treating frequency processing, attention, and boundary reasoning as independent add-ons. The detector routes information in a prescribed order: spatial evidence is first augmented with global spectral context, deep representations then exchange spatial and spectral cues, and cross-scale fusion is finally conditioned on boundary--semantic disagreement. This ordering yields a compact representation pipeline in which low-frequency context stabilizes global structure while high-frequency evidence protects small-object contours. We further retain a wavelet-subband training transformation that perturbs low- and high-frequency coefficients independently, targeting appearance shifts caused by fog, rain, snow, and low illumination. The formulation exposes a single routing variable at each stage and distinguishes reusable signal transforms from the task-specific policy that decides where each signal is injected. On CityPersons, the proposed detector obtains 70.4 AP$_{50}$ and 44.2 AP$_{50:95}$, compared with 68.1 and 42.2 for RT-DETR, while the full wavelet-augmented configuration reaches 71.1 and 44.6.

0.30

CrowdTraj: A Benchmark for Dense Crowd Trajectory Prediction in Realistic Crowded Environments

cs.CV ·2026-09-07 ·Antonius Bima Murti Wijaya, Paul Henderson, Marwa Mahmoud
benchmark similarity 0.70
Abstract

In real-world applications, pedestrian trajectory prediction models rely on inputs from detection and tracking systems. Prior trajectory prediction benchmarks either contain relatively sparse pedestrian interactions, assume perfect tracking inputs, or rely on overhead viewpoints that minimize occlusion and perspective distortion, limiting evaluation in realistic dense-crowd scenarios. We present CrowdTraj, a benchmark for pedestrian trajectory prediction in natural dense crowd scenes. Unlike previous datasets, CrowdTraj supports end-to-end evaluation from detection through tracking to trajectory prediction under severe occlusion in CCTV views. It also captures diverse, natural pedestrian behaviours, including abrupt directional changes rarely observed in existing benchmarks. CrowdTraj includes five diverse scenes, with an average of 1,146 unique pedestrians per scene, maximum frame-level densities ranging from 114 to 372 pedestrians, and over 3.2 million annotated head bounding boxes. CrowdTraj provides pixel and real-world coordinates via per-scene homography matrices for physically meaningful analysis. Our experimental results show that tracking accuracy (IDF1) drops to 0.68 to 0.70 in the densest scenes, compared with approximately 0.90 in less crowded scenes. Trajectory prediction training also becomes substantially more computationally expensive in dense scenes, with training times increasing by up to 8 times. These findings show that CrowdTraj exposes limitations in current trajectory prediction pipelines that remain hidden on existing sparse-crowd benchmarks, particularly in robustness to tracking noise and computational scalability.

0.30

MV2GF: Multi-view Pedestrian Detection with a Visual Geometric Foundation Model

cs.CV ·2026-08-21 ·Taiga Yamane, Satoshi Suzuki, Ryo Masumura, Shota Orihashi, Tomohiro Tanaka +2 more
top venue similarity 0.67
Abstract · Accepted by ECCV 2026

Multi-View Pedestrian Detection (MVPD) aims to detect pedestrians in the form of a bird's eye view map from multi-view images. Recent MVPD methods adopt a unified framework that projects 2D image features into a 3D world space and aggregates them into a single feature. Although they are effective, they struggle to generalize to unseen camera configurations during training due to two main issues. First, they are difficult to capture accurate visual geometry across views in unseen camera configurations. Second, they make detection models highly dependent on distortion patterns during training arising from their image feature projection. To address these, we leverage a visual geometric foundation model and propose MV2GF. This foundation model has exhibited strong generalization in capturing visual geometry across views and predicting accurate 3D attributes in diverse camera configurations. MV2GF fuses task-specific features with general-purpose geometric features extracted by the foundation model to effectively capture the visual geometry even in unseen camera configurations. Furthermore, MV2GF projects each pixel in the image features to an appropriate 3D location using 3D pointmaps predicted by the foundation model, preventing the detection model from depending on distortion patterns during training. Our experiments demonstrate the effectiveness of leveraging a visual geometric foundation model for MVPD and that MV2GF generalizes better than existing methods.

0.40

One-Stage Object Detectors in Autonomous Driving

cs.CV cs.AI ·2026-08-19 ·Jonel Roman, Ryan Sirjue, Peter Nguyen, Daniel Krutky, Juan Jesus +1 more
surveybenchmark similarity 0.66
Abstract

Autonomous vehicles depend on fast and reliable perception systems to detect surrounding vehicles, pedestrians, cyclists, traffic signs, and other road objects in real time. This paper presents a comprehensive survey and analysis of one-stage object detectors for autonomous driving rather than an implementation of a new detection system. The survey reviews the evolution of major one-stage detectors, including YOLOv1, SSD, RetinaNet, EfficientDet, anchor-free detectors such as FCOS and CenterNet, and recent real-time models such as YOLOv10. It compares these architectures through their design choices, feature-fusion strategies, loss functions, deployment trade-offs, and reported benchmark performance. The paper also summarizes commonly used autonomous-driving datasets, evaluation metrics, open challenges, and future research directions. Overall, this survey highlights how one-stage detectors balance speed, accuracy, efficiency, and robustness, while also emphasizing the remaining gap between benchmark results and dependable real-world autonomous-driving performance.

0.26

ROD-Dataset: A Pedestrian-Perspective Benchmark of Urban Obstacle Classes for YOLO-Based Detection

cs.CV cs.CY ·2026-10-31 ·Abtin Zandi, Ariyan Azami, Bardia Sabagh Kermani, Parsa Abbasian, Roza Ganjipour +2 more
benchmark similarity 0.66
Abstract

Two groups of pedestrians face avoidable risk on the city sidewalk: people living with visual impairment, who reach an obstacle before anything warns them, and people walking with divided attention, who register a hazard late or not at all. A vision system can warn them only about obstacles it has learned to recognize, so its training data limits the protection it offers. No suitable training set exists: public benchmarks are recorded from vehicles, aerial platforms, or fixed rigs, general-purpose detectors omit the street furniture that causes trips, and pedestrian-focused collections are confined to single regions with incompatible class schemes. This paper introduces the Real-time Obstacle Detection (ROD) dataset: more than 24,000 images and 40,000 annotated obstacles across 25 classes, from vehicles and people to the stairs, manholes, traffic cones, and benches that general-purpose detectors overlook. Because street furniture differs between cities, ROD unifies twenty-nine public collections onto one taxonomy and adds eye-level imagery from two contrasting cities on two continents, Tehran and Toronto. Every label is human-verified, and each capture campaign is admitted only after a compact detector shows it can learn the class. Six lightweight YOLO detectors (nano and tiny variants) benchmarked on ROD all exceed 0.86 recall; YOLO12n attains the highest recall (0.889), YOLO26n the highest precision (0.925), and YOLOv9t the best mAP@0.50 (0.882) with the fewest parameters. Because the recall and mAP rankings disagree, selecting a model by mAP does not minimize missed obstacles, so per-class recall is reported for all 25 classes.

0.13

Detection Is Not the Finish Line: Multiscale Decoding and Constraint-Aware Global Association for Multi-Camera 3D Tracking

cs.CV ·2026-11-09 ·Abdullah Naeem, Anav Katwal, Ayon Day, Md Tamjidul Hoque
benchmark similarity 0.65
Abstract

A query-based multi-view 3D detector can transfer well to a new calibrated camera network and still produce badly fragmented tracks: on the AI City Challenge 2026 Track 1 validation set, the frozen Sparse4D detector behind the official challenge winner splits each Person identity into a median of eight fragments, and half of the gaps between fragments exceed the horizon of a causal tracker. We show that most of the remaining headroom of such a system lies after detection. Keeping the public detector frozen, we add (i) class-wise source selection between two input scales, which recovers small and distant people from a 0.75x pass while leaving large objects at the scale the detector was trained for; (ii) a geometry-to-appearance bridge that projects every 3D box into all calibrated views, matches it to 2D person detections, and aggregates robust track-level re-identification descriptors; and (iii) constraint-aware consolidation, which combines a causal short-gap stitch with offline centroid-linkage clustering under two hard constraints, temporal exclusion and metric 3D reachability, plus class-aware long-gap stitching for rigid objects. Every association stage changes object identities only. On the challenge evaluation server the system scores 62.3947 3D HOTA (DetA 57.4501, AssA 56.8131, LocA 80.1272), first on the general leaderboard snapshot of 30 October 2026 (second at the time of writing, after a competitor's detector update) and 5.63 points above our reproduction of the official winner; the constrained association stage alone contributes +3.73 HOTA through a +5.49 AssA gain at unchanged DetA. Controlled fixed-box validation studies, a constraint ablation, sensitivity curves, and a catalogue of negative results support the design.

0.16

Solution for UCF UrbanTwin V2X-Real Track: Sim-to-Real Urban LiDAR 3D Object Detection

cs.CV ·2026-09-07 ·Pu Luo, Cong Xu, Yumei Li, Kexin Zhang, Licheng Jiao +2 more
similarity 0.65
Abstract · 7 pages,2 figures

Bridging the simulation-to-reality gap in roadside LiDAR requires addressing several coupled discrepancies, including scene geometry, sampling density, return patterns, and pedestrian scale. This report presents a multi-source collaborative training and class-aware fusion framework for Sim2Real 3D detection. The method organizes digital-twin scans, diffusion-redrawn scans, density-stabilized scans, and pedestrian morphology-aligned samples into a unified training pool with complementary roles. Within a common DSVT detection formulation, source-specialized expert branches preserve those roles while optimizing for the same detection objective. At inference, a predefined class-aware fusion pathway integrates geometry-stable and calibration-aware branches for vehicles, sampling-complementary branches for trucks, and morphology-consistent evidence for pedestrians. A label-free point-cloud center blend then refines geometric localization. On the UrbanTwin V2X-Real hidden test set, the unified system achieves a combined score of 0.7421, with 3D mAP@0.5 of 0.4518 and a realism score of 0.8871. The results indicate that a stable, interpretable collaboration among data sources is more valuable than unconstrained aggregation of model outputs.

0.29

Occlusion for Free: Detecting Occlusion from the Disagreement Between Two Monocular Distance Cues

cs.CV cs.AI ·2026-11-04 ·Chibueze Praise Onyenweaku, Toyibat Adele, Sikirulahi Opeyemi Abdulkareem, Obed Honour Eje
published similarity 0.65
Abstract · Accepted at the NeurIPS 2026 GlobalSouthAI Workshop

Knowing that a pedestrian is occluded is useful to a robot even when the detector cannot recover the hidden pixels, but occlusion estimators are normally trained on occlusion annotations that deployment settings rarely have. We show that occlusion can be read off two distance estimates a camera-only pipeline already computes. Apparent height is largely unchanged by occlusion, because the detected box still spans the whole person; monocular metric depth is pulled toward the occluder, because the nearest surface inside the box is what a depth map reports. Only their ordering matters, so no focal length, stature, or depth scale is needed, provided the depth model's error is close to a pure gain, a condition that can be checked without labels. The score detects heavy occlusion on KITTI with AUC 0.909 (0.888 over all annotated pedestrians, including those the detector misses), requires no training and no occlusion labels, and is not a proxy for range: within fixed distance bands it holds AUC 0.894-0.925 while true distance alone sits near chance. On synthetic CARLA scenes with measured visibility it reaches 0.819, against 0.644 for distance alone. We arrived here after measuring three standard architectural responses to occlusion, depth fusion, occlusion-simulating augmentation, and attention, none of which improved detection outside its training distribution in the configurations we tested, and after finding that a detector trained on German roads loses half its accuracy on self-annotated street scenes in Lagos, Nigeria. Signals that need no local annotation are worth more in settings that benchmarks do not represent.

0.27