CS Paper Radar

MVP-SLAM: Multi-Camera Visual-Inertial Floorplan-Prior SLAM

Asier Bikandi-Noya, Miguel Fernandez-Cortizas, Muhammad Shaheer, Holger Voos, Jose Luis Sanchez-Lopez

cs.RO ·submitted 2026-09-30 12:19 UTC · v1

Abstract

Indoor building construction sites are demanding environments for visual SLAM, where variable lighting and repetitive, low-textured structures make the system drift over long trajectories, though structural elements such as walls remain distinguishable despite these conditions. These buildings are constructed according to their as-planned floor plans, available from the design phase, and although the actual as-built site can differ from this design, floor plans still provide a metric reference, both to localize the system in the building and to correct drift. Existing methods often use the floor plan to correct an already-built trajectory offline, and those that instead correct it online typically rely on depth sensors. We instead present MVP-SLAM, an online visual-inertial SLAM on two opposite-facing fisheye cameras that corrects drift from cameras alone by matching walls detected in its map to the floor plan, through a drift-aware policy. A multi-stage integration then turns each matched pair incrementally into a persistent correction, so the trajectory stays corrected and localized within the floor plan as it is built. MVP-SLAM was validated on the multi-floor construction sites of the Hilti-Trimble SLAM Challenge 2026, ranking 2nd of 22 teams in the Localization task (0.29 m mean RMSE) and 5th of 62 teams in the SLAM task (0.24 m), the top-ranked one in both tasks among those that operate online, integrate the floor plan, and localize within it.

Comment
9 pages, 4 figures. Submitted to IEEE Robotics and Automation Letters (RA-L)

Closest papers

Nearest neighbours by meaning across the whole index.

SlugTrails: An Egocentric Benchmark for Floor Plan Localization in Large Buildings

cs.CV ·2026-09-17 ·Yunqian Cheng, Roberto Manduchi
benchmarkdatasetcode/datahot direction similarity 0.72
Abstract · 8 pages, 4 figures. Preprint. Code and data: https://github.com/Head-inthe-Cloud/SlugTrails

Floor-plan-based indoor visual localization enables infrastructure-free positioning, but most methods are developed and evaluated in small residential environments unlike the large public buildings of real deployment. We introduce SlugTrails, a floor plan localization benchmark for large indoor spaces under realistic egocentric sensing: $30$ Hz Aria glasses recordings across three campus buildings and six floors ($22089$ m$^2$ of floor plan outline), CAD-derived floor plans with semantic classes and circulation space masks, and trajectories aligned into the floor plan frame using laser-surveyed anchors. One protocol covers three practical ways of gathering geometry under a limited field of view -- a single walking frame, a stationary multi-view sweep, and a walking stream with odometry -- so methods designed for different regimes are compared on the same buildings and ground truth. Evaluating five representative geometric and learned systems under their native sensing configurations, we find that stock checkpoints (official released weights) are near zero on SlugTrails (at most $0.004$ R@1m30$^{\circ}$ on walking single frames), while fine-tuning on SlugTrails improves every trainable family on all three tasks (e.g., F$^3$Loc $0.0 \rightarrow 0.141$ single-frame and $0.03 \rightarrow 0.66$ sequential), with gains compounding as observations accumulate. The same fine-tuned weights also improve cross-dataset generalization on LaMAR with no LaMAR training (sequential R@1m $0.048 \rightarrow 0.143$ for F$^3$Loc and $0.063 \rightarrow 0.127$ for UnLoc), whereas train-from-scratch on SlugTrails alone stays far below fine-tuning from stock weights -- evidence that floor plan localization is currently limited by indoor data rather than by architecture. We release the dataset, protocols, and tools at https://github.com/Head-inthe-Cloud/SlugTrails.

0.53

FreeLoc: Online Floorplan Localization via Diffusion-Aided Pose Refinement

cs.RO cs.CV ·2026-10-04 ·Haocheng Peng, Boyang Zhou, Jiarui Hu, Xiyue Guo, Ziyang Zhang +5 more
publishedcode/data similarity 0.69
Abstract · Accepted at the Conference on Robot Learning (CoRL) 2026. Project page: https://zju3dv.github.io/freeloc/

Floorplans provide compact and widely available geometric maps for indoor localization, but existing high-performing floorplan-based methods still convert them into dense scene-specific offline databases, tying accuracy, storage, and runtime to the sampling resolution of the discretized pose space. We present FreeLoc, an online RGB-based floorplan localization framework that treats the floorplan as a directly queryable geometric map. FreeLoc introduces an efficient online geometric querying and diffusion-aided refinement scheme, which retrieves plausible pose anchors through on-the-fly floorplan ray querying and refines them into accurate continuous pose estimates. For sequential localization, FreeLoc develops an online likelihood construction strategy that bridges single-frame localization and probabilistic temporal fusion by constructing likelihoods from coarse-sampled candidates and refined pose hypotheses, enabling histogram-filter-based temporal fusion without offline databases. Experiments demonstrate real-time online inference and state-of-the-art performance in both single-frame and sequential localization, while real-world results validate practical deployability in indoor robotic localization scenarios.

0.32

Reading the Room: Scale-ambiguous Semantic Registration of Sparse VSLAM Maps to Floor Plans in Partially Built Environments

cs.RO cs.CV ·2026-10-21 ·Bjorn Stragier, Emilia Szymańska, J. Micah Prendergast, Lukas Rosenberger Schmid
similarity 0.67
Abstract

Many robotic construction applications, such as progress tracking, require registering a sensor trajectory to a prior 2D floor plan. Visual capture is attractive for its low cost and availability, but aligning a visual simultaneous localization and mapping (VSLAM) map to a floor plan is difficult; VSLAM recovers geometry only up to an unknown similarity transform, the sparse point cloud is cross-modal to the symbolic floor plan, sites are only partially built during capture, and construction sites are visually repetitive, degrading map quality while removing distinctive features. Existing methods address at most two of these challenges. We thus introduce Reading the Room(RR), a global-local approach to register scale-ambiguous, sparse, semantic VSLAM maps to partially built floor plans. Our key idea is to define a single robust, differentiable, class-balanced semantic-geometric energy function that governs all stages of the pipeline. We develop two global initialization schemes, leveraging a single inaccurate user-provided correspondence if provided, or estimating the initialization globally using a cross-modal matching network. Both schemes are designed to find initial candidates with respect to the energy function, which is then directly optimized for local refinement. We evaluate RR on 33 sequences across three active construction sites against classical and learning-based baselines, achieving a 4.5x improvement in mean absolute trajectory error over the strongest baseline in the general unconstrained setting, which increases to 7.6x when an anchor is provided.

0.28

DAVIO: Dense Monocular-Inertial SLAM with Feed-Forward Initialization and Pose-Conditioned Mapping

cs.RO cs.CV ·2026-09-23 ·Jaafar Mahmoud, Arthur Movsesyan, Mikhail Iumanov, Sergey Kolyubin
similarity 0.66
Abstract

A camera and an IMU are the minimal sensor setup for metric localization and dense mapping, yet classical visual--inertial filters must wait for parallax before they start and then retain only sparse landmarks. Feed-forward geometry models, in contrast, predict dense structure from a few images but provide neither metric scale nor gravity. We present DAVIO, which uses a single multi-view depth model, Depth Anything~3, for both start-up and mapping. At start-up, a five-image window and preintegrated IMU measurements form a feature-free linear system. Its robust, conditioning-checked solution bootstraps a VIO filter through buffered replay. During tracking, the filter's metric poses condition the depth model. Residual scale is corrected only along viewing rays, which preserves the metric camera baselines, and a gravity-preserving submap graph with drift-gated revisits refines the map. On EuRoC, DAVIO starts markedly earlier, reduces the localization error, and maps more accurately than SOTA feed-forward mappers given identical poses. On building-scale ORI sequences, DAVIO is on bar or better than SOTA mappers on the same odometry, and degrades far less when GT poses are replaced by real odometry. We release the code of DAVIO, a real-time dense metric SLAM system, to the community.

0.17

Spotter: Efficient Urban Visual Localization via Geo-Referenced Facade Landmarks in GPS-Degraded Environments

cs.CV ·2026-08-24 ·Antoni Valls, Jordi Sanchez-Riera
benchmark similarity 0.65
Abstract

Accurate visual localization on robotic and wearable platforms remains challenging in dense urban environments. Existing methodologies typically rely on GPS for absolute positioning, yet GPS signals frequently degrade in urban canyons due to multipath propagation. Consequently, standard solutions like visual odometry suffer from unmitigated drift over time, while map-matching techniques struggle to acquire the reliable GPS priors they need, on top of being too computationally heavy for real-time edge execution. To address these limitations, we propose Spotter, a robuts and real-time visual localization framework that uses building facades as a reliable source of global geo-reference, while retaining the capability to integrate GPS signals when available. In an offline stage, Spotter processes Google Street View panoramas by semantically segmenting facades and pairing multi-view stereo depth with cartographic data to build a compact metric database. At runtime, query images are matched via a cascaded retrieval and geometric verification pipeline to recover fine-grained global camera localization. We benchmark Spotter on a newly collected dataset of pedestrian sequences acquired with wearable smart glasses across several districts of Barcelona. Experimental results show that Spotter outperforms odometry-based baselines and achieves localization accuracy comparable to state-of-the-art map-based methods while operating at significantly higher frame rates.

0.18

RootSLAM: Square Root Bundle Adjustment for Visual-Inertial SLAM

cs.RO cs.CV ·2026-10-10 ·Tomás Santucci, Mateo de Mayo, Daniel Cremers, Taihú Pire
benchmark similarity 0.65
Abstract

Efficient perception is a prerequisite for the small, low-power devices targeted by robotics, mixed reality, autonomous driving, and drone applications, all of which rely on Simultaneous Localization and Mapping (SLAM) to estimate their motion within their surroundings. Learning-based SLAM systems achieve state-of-the-art accuracy but are demanding in compute, whereas classical geometry-based methods retain a strong efficiency advantage with little to no loss in accuracy. In this work we present RootSLAM, a fully-featured visual-inertial SLAM system for multi-camera setups built on Basalt. RootSLAM achieves accuracy competitive with the state of the art while running up to 20 times faster, facilitating the deployment of perception systems in resource constrained environments. We adapt the square-root bundle adjustment formulation from structure from motion into the multi-camera visual-inertial SLAM setting through a novel reformulation that leverages the system's pose-graph, letting the global optimizer run in single-precision floating point, thus doubling its performance. We provide a thorough benchmark against the state of the art together with an ablation study of our contributions. Our new implementation, including its map management and loop detection module, pose-graph optimizer, and global mapping components, will be open-sourced.

0.21

Online Geometric Change Detection via Scene Decomposition

cs.RO ·2026-09-15 ·David Thorne, Samuel Jia Cong Chua, Nakul Joshi, Aiden Wong, Christa S. Robison +2 more
code/data similarity 0.64
Abstract

Autonomous robots are increasingly deployed on long duration single- and multi-session missions in dynamic environments, where the ability to identify environmental changes such as fallen trees or opened doors provides important contextual information for online planning. We propose a framework called Change Detection via Scene Decomposition (CDSD) for accurate online geometric change detection using LiDAR or RGB-D sensors. Recent advances in geometric SLAM have made it possible to generate dense, tightly aligned maps without post processing, but comparing global maps across entire sessions is computationally expensive and does not allow for single-session online change detection. CDSD instead spatially decomposes mapped environments into unique scenes where changes can be found efficiently by comparing dense, local subsets of the global map called submaps. As the first submap-based approach for geometric change detection, we identify and address the following core challenges: 1) identifying appropriate scenes for change detection that require minimal redundant information; 2) generating dense and representative submaps for each scene; 3) detecting changes between submaps with differing fields of view; and 4) processing detected changes for real-time map reconstruction. Results demonstrate our algorithm on custom datasets collected at the Army Research Laboratory facility in Graces Quarters, Maryland, and on open-source multi-session change detection datasets.

0.36

Geometry-Aware Online Mapping for 3D Gaussian Splatting SLAM

cs.RO ·2026-08-14 ·Thai Luu, Quan Tran, Hieu Phan, Tuan Dang
top venuecode/data similarity 0.64
Abstract

Recent 3D Gaussian Splatting (3DGS) has enabled efficient photorealistic view synthesis and is rapidly being adopted in simultaneous localization and mapping (SLAM) systems for online mapping. In these systems, a Gaussian map must be expanded and refined incrementally while tracking runs in real time, so initialization and density control directly determine where limited computation and iterations are spent. This contrasts with offline 3DGS reconstruction, where such heuristics can be amortized over long optimization schedules. However, most 3DGS-SLAM pipelines inherit initialization and density-control heuristics from offline reconstruction, which can become brittle under the strict per-keyframe optimization budgets and incremental map growth of online SLAM. In this work, we revisit these heuristics in a decoupled 3DGS-SLAM setting and propose three geometry-aware methods that operate in the mapping thread: transmittance-preserving densification, camera-aware scale initialization from depth and intrinsics, and error-guided densification that focuses new primitives on high-residual regions. Our results show consistent improvements in rendering quality with negligible overhead, highlighting the coupling between photometric residuals and pose uncertainty in online SLAM. We will open-source our code to the community to foster growth and validate reproducibility.

0.52