CS Paper Radar

CompMat-Bench: Benchmarking AI Agents for Computational Materials Science

Chenmu Zhang, Levi Felix, Jun-Jie Zhang, Xingfu Li, Xuelian Jiang, Tao Jiang, Subhendu Mishra, Xixi Qin, Boris Yakobson

cs.AI cond-mat.mtrl-scics.LG ·submitted 2026-09-30 19:37 UTC · v2
benchmark

Abstract

Evaluating AI agents on scientific research tasks is constrained by the time and resources required for the underlying experiments or calculations. In computational materials research, repeating the same expensive simulations across agents and trials can make evaluation impractical. We introduce CompMat-Bench, a benchmark of 94 tasks derived from recently published computational materials studies, each asking agents to complete a step toward achieving the study's scientific goal. We reproduce the research steps in advance and assess agents on preparing inputs and analyzing outputs for expensive simulations, so expensive simulations can be avoided during evaluation. The reproduced inputs and results serve as ground truth for grading agents with fixed rules, without an LLM judge. The benchmark supports four evaluation conditions: single tasks and workflows composed of related tasks, each with full or reduced methodological guidance. With full guidance on single tasks, agents based on three LLMs demonstrate the ability to complete individual materials research steps, with pass rates of 66.0-90.4% across 94 tasks. Both longer workflows and reduced guidance can limit agent performance, but in different ways for different agents: they lower the pass rates of the weaker agents, whereas the strongest agent falls only when a long workflow is combined with reduced guidance. Failure analysis attributes most failures to scientific errors rather than to errors in software usage. CompMat-Bench provides a basis for comparing agents on the steps of real materials research and for analyzing agent failure modes.

Closest papers

Nearest neighbours by meaning across the whole index.

MatOS: An Agent Operating System for Materials Research

cs.AI cond-mat.mtrl-sci ·2026-10-25 ·Dingyang Lyu, Jing Gao, Zhonghao Chang, Jingjie Huang, Xiangran Cheng +11 more
code/data similarity 0.73
Abstract · 54 pages, 21 figures, 11 tables

Materials research relies on scattered and growing data, knowledge, and simulation tools, and a single study often spans multi-day workflows across literature analysis, computation, and experiment. Large language model agents can now retrieve materials data, operate simulation codes, and close design-synthesis-characterization loops with autonomous laboratories. However, extending these agents with new capabilities, keeping long-running tasks on track, and letting them learn from past tasks and user feedback remain difficult. Here we present MatOS, an agent operating system for materials research with three core components: (1) a layered scientific asset graph that organizes data, knowledge, tools, skills, roles, and workflows as reusable assets; (2) a stateful adaptive workflow that runs tasks as explicit execution graphs with scientific checks, so that they can be resumed and traced; and (3) evidence-driven asset evolution, which revises these assets from execution records and user feedback. On ResearchClawBench, MatOS improves on the previously best-performing agent by 11.15% with the same base model and extends the cost-score Pareto frontier. With a common base model, it outperforms Codex CLI and Claude Code, exceeding Codex CLI by 2.13% on MatTools and 4.17% on SciAgentGym. In eight research cases, MatOS narrowed more than 30 million candidate structures to 97 solid-electrolyte candidates, identified 89 halide variants with higher computed conductivity than their parent structures, linked the force errors of 11 pretrained interatomic potentials to local atomic environments, and supported two new methods that reduce errors by 3.1% and 13.6% relative to their baselines. These results show that organizing research capabilities as reusable, evolving assets enables agents to carry out long, multistage materials studies. Code is available at https://github.com/DingyangLyu/MatOS.

0.31

Benchmarking language models and agents for scientific reasoning in evolving materials laboratories

cs.AI cond-mat.mtrl-scics.CEcs.LG ·2026-11-09 ·Xuyu Dong, Yixuan Li, Jianguo Huang, Feng Chen, Yiyun Zhou +3 more
similarity 0.71
Abstract · 36 pages, 5 figures, 2 tables

Large language models and the multi-agent systems built around them could accelerate materials discovery by connecting scientific knowledge with experimental decisions. Existing benchmarks establish capabilities in domain knowledge, multimodal interpretation and scientific tool use. As language models increasingly support materials research workflows, their ability to distinguish closely related material states and reason accurately with quantitative evidence remains insufficiently evaluated. These abilities are essential for comparing material responses, assessing mechanisms and maintaining reliable judgements as experimental evidence accumulates. We introduce MatScope to evaluate three connected capabilities. M1 tests unaided, condition-specific reasoning through 200 tasks spanning ten research functions, using aluminium and high-entropy alloys as representative material systems. M2 tests agent-assisted transfer of related knowledge to unresolved materials questions. MatEvoBench-20 tests initial forecasts across scientific dependency chains and revisions of still-hidden responses as observations accumulate. Across eleven model deployments, including GPT-6 Astra and Claude Fable 5.1, given-input calculations and many physical explanations are handled well. Fine-grained response estimates, comparisons between similar states and quantitatively supported choices remain substantially weaker. Related literature improves selected estimates, while condition and baseline mismatches limit transfer. Progressive observations calibrate some downstream responses and destabilize earlier accurate predictions. MatScope establishes measurable targets for developing reliable scientific reasoning in future self-evolving materials laboratories and materials-aware world models.

0.19

Autonomous Science Bench: Evaluating AI Agents for Autonomous Scientific Discovery

cs.AI ·2026-10-13 ·Yibo Wen, Han Liu
benchmark similarity 0.71
Abstract

AI agents for autonomous scientific discovery must decide which experiments to run under a limited budget. Most benchmarks for science agents provide fixed datasets, while others that support active experimentation largely rely on simulation. We introduce Autonomous Science Bench, an initial release comprising six budgeted design-build-test-learn campaigns grounded in published experiments across biology, chemistry, and materials science. Agents select batches of designs, receive measurements from a lab service, and use the results to guide subsequent experiments before delivering a predictive model. Success requires passing two calibrated gates: a discovery gate, which evaluates the designs the agent measured, and a learning gate, which evaluates its model's ranking of held-out designs. In a pilot evaluation of eight agent-model configurations and 144 trials, the best configuration succeeds in 67% of trials, while the hardest campaign is solved in only three of 24 attempts. The two gates reveal different weaknesses: some agents build accurate rankings but find too few promising designs, while others find promising designs but fail to predict which unseen designs will perform well. These differences are obscured by overall success rates alone. We release version 0.1 of the campaigns, lab runtime, and public leaderboard at https://yibow.me/autonomous-science-bench.

0.50

BixBench3: Benchmarking AI agents on research-study-scale computational biology tasks

cs.AI q-bio.QM ·2026-08-26 ·Zane Koch, Asmamaw T. Wassie, Javier Valdes-Aleman, Jason Lee, Michaela M. Hinks +3 more
benchmarkhighly cited similarity 0.70
Abstract · 28 pages, 6 figures

Artificial intelligence (AI) promises to accelerate biological research by automating computational analyses. Yet the ability of AI agents to execute on computational biology at the scale of complete research studies has not been systematically evaluated. Here we introduce BixBench3, a benchmark that measures the capacity of AI agents to process raw biological data through to scientific results. We designed BixBench3 tasks to mirror the delegation of work from a scientist to an agent: the scientist chooses the research question and high-level methods, then delegates implementation of all analyses to the agent. In each task, an agent receives a research objective, methodological guidance, and raw data derived from a published scientific study, and must execute a sequence of analyses to achieve the research objective. The data artifacts resulting from these analyses, such as peak call matrices or differential expression tables, are programmatically graded against the corresponding artifacts generated and reported in the original study. Across 20 BixBench3 tasks encompassing the generation of 138 unique artifacts, we find that 13 frontier models achieve scores ranging from 0.00 for Gemini 3.1 Flash Lite to 0.48 for GPT 5.6 Sol. Agents perform worse on tasks with larger raw datasets (0.36 on tasks with <100 GB versus 0.10 on tasks with >100 GB) and on analyses requiring more sequential steps (0.36 at 1-2 steps vs 0.24 at 3+). On average, agents use 6.8 hours, 102 million tokens, and \$43 to complete each task, with the longest attempts consuming 24 hours, 1.07 billion tokens, and \$525. Notably, the highest-scoring agents used fewer tokens and were cheaper than less performant options. These results reveal that LLMs vary substantially in their ability to (1) execute multiple sequential analysis steps coherently, (2) manage large quantities of raw data, and (3) work across scientific domains.

0.43

CAE-Bench: Benchmarking AI Agents for Reusable CAE Solver Development

cs.AI ·2026-11-16 ·Zhiyu Zhou, Tianyou Liu, Xinping Yang, Yiyao Liu, Jiayi Dong +6 more
benchmark similarity 0.70
Abstract · 18 pages, 6 figures, 8 tables. Zhiyu Zhou and Tianyou Liu contributed equally

We developed CAE-Bench, a benchmark to evaluate AI agents on Computer-Aided Engineering (CAE) solver development. A CAE solver is more than a PDE solver; it must be able to generalize across various inputs, such as different boundary conditions, geometries, and material properties. CAE-Bench evaluates the generalizability of AI-developed CAE solvers by providing the same task, such as a heat transfer problem, multiple cases, with each case specifying an input. The AI agent develops a solver for a fixed task using only a few public cases, and the resulting solver is then tested on held-out cases, i.e., cases it has never seen before. We evaluate 12 models across a range of reasoning settings on 80 computational tasks. Our experiments show that even if a solver developed by an AI agent performs well on the public cases, it may even get 0 score on held-out cases. For tasks such as fluid dynamics problems, even the solver developed by GPT-6 Astra performs poorly on held-out cases. A data format and an SDK for task registration are provided, so the researcher can use the benchmark on their own infrastructure. We hope that CAE-Bench will help the community to develop AI agents that can develop reusable CAE solvers that generalize to various inputs.

0.28

SCI-AGENT-EXAM: Benchmarking Agents on Scientific Research Tasks

cs.CL ·2026-10-23 ·Tianyun Zhong, Wei Wang, Jialin Li, Jianhong Tu, Liyao Li +15 more
benchmarkcode/data similarity 0.70
Abstract

Large language model (LLM) agents are increasingly capable of supporting scientific workflows, but their capabilities across diverse research activities remain difficult to assess systematically. Existing benchmarks often focus on selected scientific capabilities or task types, limiting a comprehensive characterization of scientific agents' strengths and weaknesses in realistic research workflows. We introduce SCI-AGENT-EXAM, a workflow-oriented benchmark comprising 120 expert-curated tasks across 11 scientific fields and 7 research task types defined by the Scientific Workflow Task Taxonomy (SWTT). Each task requires both executable artifacts (e.g., code and scripts) and textual artifacts (e.g., reports and explanations). To evaluate the heterogeneous task outputs, we develop a hybrid evaluation protocol combining deterministic programmatic verification for executable artifacts with a calibrated, expert-validated LLM-based judge for textual artifacts. Beyond outcome assessment, we analyze progress and solution stability along execution trajectories to characterize how agents reach their final results. Experiments with 10 frontier LLM agents reveal substantial performance gaps: GPT-6 Astra achieves the highest overall score of 80.9, yet only 26.0% of its runs exceed the 0.95 success threshold. Further analyses uncover distinct capability profiles across scientific task types and substantial variation in execution efficiency and stability. Our code and data are available at https://github.com/SKYLENAGE-AI/Sci-Agent-Exam.

0.28

PAPERBENCHX: Can AI Reproduce Science Across Disciplines?

cs.AI ·2026-10-29 ·Ruoyu Wu, Zengji Tu, Aolong Sun, Tianyi Ma, Junren Li +12 more
benchmark similarity 0.69
Abstract

Before AI can be trusted to discover new science, it should be able to reproduce what science already knows. Reproduction provides a rigorous checkpoint for an AI scientist: the target claim is known, yet recovering it still requires translating an incomplete scientific description into an executable experiment and producing evidence that can be independently verified. Existing research-reproduction benchmarks largely focus on AI and machine learning, where experiments share relatively homogeneous software stacks. Extending this capability across scientific disciplines introduces a different challenge: agents must operate domain-specific scientific software, make physical and numerical choices, diagnose long-running computations, and distinguish valid evidence from merely plausible outputs. We introduce PAPERBENCHX, a benchmark of 93 expert-constructed paper-reproduction tasks spanning 12 research areas across electromagnetics, photonics, chemistry, materials science, biology, and robotics. Each task provides the source paper, a public task specification, and a domain-native scientific environment involving specialized scientific software. Agents must reconstruct a key experiment, execute and diagnose it, and deliver a runnable workflow that supports the target scientific claim. To evaluate scientific validity rather than surface-level agreement, we replay every submission from scratch and score only regenerated evidence against expert-validated criteria. Across 10 frontier agent configurations, the best configuration fully reproduces only 14% tasks under the 90% threshold. Meanwhile, mean rubric scores range from 27.53% to 59.08%, indicating that substantial partial progress rarely translates into complete scientific reproduction. These results reveal a large gap between paper understanding and reliably producing reproducible scientific evidence.

0.10

MatToolBench: Benchmarking Multimodal Agents in Real-World Materials Science Workflows

cs.AI ·2026-09-29 ·Mei Wu, Rui Xie, Runyu Zhang, Yuqiang Li, Tianfan Fu +4 more
benchmarkcode/data similarity 0.68
Abstract · 25 pages, 15 figures. Mei Wu and Rui Xie contributed equally. Bo Chen and Lu Chen are corresponding authors. Project page: https://mattoolbe…

Multimodal GUI agents have achieved impressive results on general software benchmarks, yet their ability to operate professional scientific software remains largely unexplored. In materials science, sparse domain-specific web data, specialized interfaces, and tacit workflow conventions create blind spots that general-purpose pretraining cannot readily bridge. We present MatToolBench, the first real-environment benchmark for evaluating multimodal GUI agents on professional materials science software, comprising 204 tasks across 10 tools in three modalities: GUI operation, OriginPro scripting, and code-based database queries, all executed inside a Windows 11 VM. Each task is decomposed into fine-grained sub-criteria by domain experts, enabling interpretable partial-credit scoring; the GUI component of our multi-level evaluation pipeline achieves an average F1 of 0.98. For OriginPro figure-generation tasks, we further conduct a human-LLM agreement study to validate the use of a multimodal judge for secondary aesthetic assessment. Our experiments show that strong performance on general benchmarks does not transfer to professional scientific workflows, and that this gap is not a visual-grounding problem alone: failures arise from domain-specific operational knowledge, sparse pretraining coverage of scientific software, weak cross-tool artifact handoff, and critical states exposed only visually. Even the best model reaches only 25% success rate on GUI tasks and 45% on code tasks. MatToolBench therefore serves as a challenging diagnostic benchmark and real-environment testbed for data-scarce, knowledge-intensive scientific workflows.

0.36