CS Paper Radar

Screw Attention: Rigid-Body Algebra Inside a Transformer

Aly Magassouba

cs.RO cs.AI ·submitted 2026-10-01 01:33 UTC · v3

Abstract

Learned manipulation policies rediscover from data the spatial relations that rigid-body mechanics supplies in closed form, which leaves them fragile to geometric change. We present Screw Attention, a transformer layer in which the relation between two bodies is a spatial transform rather than a graph edge. Each pair of tokens carries the relative pose and, for robot joints, the joint screw. Messages are transported along this relation into the receiver's frame, while the attention scores see only frame-invariant quantities. By construction, the messages are equivariant to an independent change of frame at every token, and a single layer can express the velocity recursion of rigid-body mechanics. On LIBERO-Spatial, a policy of 16k parameters trained from object poses alone reaches 97.3% success, above graph, transformer and flat networks of the same size and a flat network with 27 times more parameters. Ablations show that the gain comes from transporting the correct relations, and that the structure pays most where the task requires relations between frames that nothing else supplies. The equivariance makes the policy robust to how the robot is described, where every other learned network collapses under a change of frame convention. Furthermore, the policy tolerates pose noise and calibration errors at least as well as an analytic controller. Used as a gated residual on an analytic controller, it also improves a contact-rich insertion task. Code and trained policies will be released.

Comment
13 pages, 8 Figures, 2 Tables

Closest papers

Nearest neighbours by meaning across the whole index.

PS-DLO: Property- and Spatially Aware Deformable Linear Object Manipulation Policy

cs.RO ·2026-10-25 ·Mengdi Li, Boxian Yao, Xiyu Zhu, Yunfan Lou, Yifan Yang +4 more
similarity 0.67
Abstract

Deformable linear objects (DLO) pose a coupled perception and control challenge: their slender geometry makes precise localization difficult, while their deformations depend on object-specific physical properties. To address this challenge, we propose PS-DLO, a property- and spatially aware DLO manipulation policy. First, contrastive image-text learning maps the initial observation to categorical descriptions of DLO properties, providing explicit physical and structural priors for action generation. Second, SAM3 extracts mask-guided features from future observations, which are distilled into the policy's action expert to encode task-relevant DLO regions and their subsequent configurations. We evaluate PS-DLO on nine real-world tasks across single-arm and bimanual platforms, training a shared multi-task policy for each embodiment. PS-DLO achieves an average success rate of 68.9%, exceeding the strongest baseline by 20.0 percentage points. In generalization experiments, PS-DLO achieves higher success rates than the baseline in six of seven visual-shift conditions on butterfly-knot untying. These results demonstrate that combining object-property priors with future spatial supervision improves multi-task DLO manipulation and robustness to visual variation.

0.18

FOCI Policy: Focus on Object-Centric Interactions for Relational Manipulation Policies

cs.RO ·2026-09-08 ·Ze Fu, Pinhao Song, Yutong Hu, Renaud Detry
publishedcode/data similarity 0.67
Abstract · Accepted to CoRL 2026

Object-centric manipulation policies improve generalization by modeling object motion instead of directly predicting robot actions. However, existing methods are often limited by representations which are either too simplistic to capture interaction dynamics or too dense to learn efficiently. We observe that many rigid relational manipulation tasks are governed by short interaction phases where the relative motion between task-relevant objects is tightly constrained. Based on this observation, we propose \textsc{Foci Policy}, an interaction-centric framework that achieves a two-fold abstraction: (1) temporally, by automatically extracting compact interaction segments from demonstrations;(2) spatially, by representing skills as relative $SE(3)$ motion between task-relevant objects, yielding invariance to scene configurations and robot embodiment. Experiments on RLBench, COLOSSEUM, and real-world tasks show that \textsc{Foci Policy} achieves strong performance with substantially less training data than prior object-centric and action-centric policies. These results suggest that modeling object-object interactions provides a simple and efficient inductive bias for rigid relational manipulation. Project page: \href{https://fitz0401.github.io/foci-page/}{fitz0401.github.io/foci-page/}.

0.36

Distributed Dexterous Manipulation with Spatially Conditioned Multi-Agent Transformers

cs.RO cs.LG ·2026-09-07 ·Sarvesh Patil
similarity 0.67
Abstract

Distributed Dexterous Manipulation (DDM) is a novel paradigm that presents significant control challenges due to high action-space redundancy, inter-robot cooperation, and dynamic object-robot interactions. This paper introduces a framework based on spatially conditioned Multi-Agent Transformers (MATs) to efficiently learn robust control policies for a DDM system grounded in an array of 64 soft delta robots arranged in an 8x8 grid. Our three core contributions are: (i) an MAT with adaptive layer norm for compute efficiency, (ii) spatial contrastive embeddings to ground transformer embeddings in the spatial configuration of the robots, and (iii) an MAT-based behavior cloning method fine-tuned using Soft Actor Critic. We also propose an action selection formulation to analyze the trade-off between task performance and the number of robots utilized. Our experiments show that MATs iteratively refine their actions through the stacked attention blocks. This further informs the benefit of spatial conditioning in transformers to learn DDM policies. We demonstrate long-horizon planar manipulation tasks with objects of various geometries in simulation and real-world. Finally, we show how action selection mitigates robot maintenance by reducing wear and tear due to inter-robot collisions while maintaining the ability to manipulate objects along various trajectories in the real-world, achieving an average error of ~1.5 cm, while using ~65% fewer robots.

0.21

SAVLA: Symmetry-Aware Vision-Language-Action Models for Robotic Manipulation

cs.RO ·2026-09-15 ·Junle Li, Weixian Waylon Li, Fuxiang Wu, Fusheng Hao, Fengxiang He
similarity 0.66
Abstract · 8 pages, 4 figures, 6 tables

Vision-language-action (VLA) models have become the dominant paradigm for language-conditioned robot manipulation. However, although images and language instructions inherently encode geometric information, VLAs acquire their spatial competence purely from demonstrations. As a result, they are reliable only within the range of scene poses that the demonstrations cover. We propose SAVLA, an end-to-end symmetry-aware VLA model for robust and data-efficient policy learning. Our approach keeps the pretrained vision-language backbone entirely frozen while combining it with an equivariant flow-matching action head and a learned canonicalizer. The head decomposes its state, action, and conditioning inputs into invariant and equivariant channels, and preserves this typing throughout all of its layers. The canonicalizer transforms oblique-view images into a canonical frame and rotates the geometric conditions consistently. We evaluate our model on LIBERO. Compared with the GR00T N1.5 baseline, SAVLA improves the success rate averaged over all four LIBERO suites by 5.1 points and increases the mean success rate under rotation on LIBERO-Goal from 41.5% to 90.4%.

0.43

Retargeting Motions to Diverse Skeletons via Learnable Flattening

cs.CV cs.AI ·2026-09-29 ·Kia-Jüng Yang, Fabian H. Sinz, Paweł A. Pierzchlewicz
similarity 0.65
Abstract · 24 pages, 9 figures

Cross-structural motion retargeting aims to transfer motion between different skeletal topologies. Despite recent progress, existing state-of-the-art models struggle with reliability in zero-shot settings, i.e. skeletons with different topologies which were unseen during training, and recent Transformer-based attempts have failed to outperform specialized geometric methods. We bridge this gap with a Transformer Autoencoder that learns a topology- and translation-invariant latent space. Our core contribution is a learnable flattening of skeletal graphs that captures both local dependencies and global structure. Unlike the standard transformer architecture, which adds positional information to token content, we integrate graph-based positional encodings multiplicatively, a design choice that follows directly from our flattening formulation. The resulting model handles diverse skeletal topologies within a single unified architecture and trains in a fully unsupervised manner, requiring no paired retargeting data. Ablation studies show, that the graph encodings, multiplicative formulation, and Transformer backbone is critical for the performance. In zero-shot evaluations, our method reduces global joint position error by $43-47\%$ over current benchmarks. A user study ($n = 37$), including expert animators, further ranks our approach highest in motion alignment and physical plausibility ($p < 0.05$). These results demonstrate that our model design is key to making transformer architectures effective for motion retargeting, outperforming existing approaches.

0.18

PointCast: One World Model for Rigid, Articulated, and Deformable Object Manipulation

cs.RO ·2026-09-23 ·Hantao Ye, Ross Worobel, Zhuoli Xie, Mingen Li, Houjian Yu +2 more
code/data similarity 0.65
Abstract · 8 pages, 8 figures, 5 tables. Project page: https://pointcast-wm.github.io. This work has been submitted to the IEEE for possible publicatio…

World models are useful for robotic manipulation because robots can predict how actions change the states of objects before executing them. We present PointCast, a point-set world model that spans rigid, articulated, and deformable object manipulation. Its state is a set of 3D points on the object and the end-effector, mesh-free and topology-agnostic. Each point keeps its identity and is supervised on its own trajectory, which teaches the model where every point goes rather than only the shape the points form. Its backbone is a diffusion transformer that denoises a short window of future point positions, conditioned on the points' recent history and the commanded end-effector motion. The backbone's attention alternates between local and global, and cross-attention to the end-effector carries the coupling. This one architecture at 19.8M parameters and one training recipe cover four regimes, rigid objects, cloth, rope, and multi-joint cabinets, with a separate checkpoint trained for each. Trained on randomized simulation and scored against four baselines on the same metric, it is best on three of four regimes and second on rigid. Trained on a real-world robot teleoperation dataset, it has the lowest mean error in four of its six categories, is second in the other two, and improves on the dataset's own model in all six; zero-shot, its simulation checkpoints are best on two of four captures. Frozen inside sampling-based model-predictive control at one network evaluation per window, it plans four simulated tasks over 64 episodes, competitive with or outperforming every baseline on each. Project website at https://pointcast-wm.github.io.

0.34

UMR: Universal Manipulation Representation

cs.RO ·2026-09-28 ·Song Liu, Linyi Li, Yanshun Zhao, Rxuan Li, Xinrui Xu +9 more
benchmarkcode/data similarity 0.64
Abstract · Submitted to IEEE International Conference on Robotics and Automation (ICRA)

General-purpose embodied manipulation hinges on a unified action representation that generalizes across embodiments and scales readily. Yet existing policies rely on embodiment-specific action spaces, making cross-embodiment demonstrations difficult to leverage at scale and limiting transfer to new embodiments and spatial variations. To this end, we introduce Universal Manipulation Representation (UMR), a unified action representation that enables zero-shot skill transfer from human demonstrations to heterogeneous robots. UMR decomposes manipulation into two functionally distinct yet geometrically linked components: embodiment-agnostic World Flow, which describes task-relevant object motion in the world frame, and Ego Trajectory, which represents end-effector motion relative to the current pose. We instantiate UMR as World--Ego Point VLA (WEPVLA), a compact 0.5B-parameter policy that learns in the unified geometric action space through a dual-stream Point Action Adapter and a unified Point Action Expert, with an $SE(3)$ conjugation coupling the two components. To improve data efficiency, we complement UMR with a Data-Efficient Strategy (DES) that diversifies object configurations through stage-aware point-cloud editing while preserving demonstrated contact geometry. In simulation, WEPVLA achieves average success rates of 97.5\% on LIBERO and 85.7\% on the 10-task RLBench benchmark. In real-world experiments, a single policy trained on human demonstrations augmented by DES transfers zero-shot to diverse deployment conditions. With about 10 minutes of collected human demonstrations per task and no robot demonstrations, it achieves 91.7\% average success across six evaluation settings, compared with 60.8\% for HumanEgo. Code and additional materials are available at https://umr-wepvla.github.io/.

0.28

From Egocentric Human Video to Robot Manipulation in the Era of Embodied Intelligence

cs.RO ·2026-11-10 ·Yi Wang, Jingqiu Wu, Lei Yao, Zhaoshuo Li, Haoyu Zhu +5 more
benchmarkcode/data similarity 0.64
Abstract · 39 pages, 10 figures. Project page: https://mikewu597.github.io/Ego2Robot_Learning/

Egocentric human video (EHV) records close-range hand-object interaction (HOI) and the temporal structure of everyday activities, offering a potentially scalable source of experience for robot manipulation. Using this experience for robot control requires recovering useful supervision without recorded robot actions and accounting for differences in morphology, viewpoint, and action space. We define Ego2Robot learning as the process of learning or adapting robot manipulation policies from EHV, organized into four learning paradigms: explicit embodiment transfer, explicit action and task supervision, egocentric video representation pretraining, and latent action and dynamics modeling. The four paradigms differ in what they derive from human video: robot-format demonstrations, interpretable supervision, visual representations, or predictive models of actions and dynamics. For each paradigm, we trace what EHV information is extracted, how robot policies use it, and when the additional data is required. Besides, we review the benchmark datasets that cover EHV, robot demonstrations, and synthetic and simulated resources. This paper links EHV data's contribution to the task information preserved and the robot-specific grounding used during training or deployment. Finally, we identify challenges in physical feasibility, agent coordination, in-context adaptation, controlled evaluation, and predictive control.

0.23