CS Paper Radar

quARtet Marker: A 3D-Printable Multi-Tag Fiducial for Robust Near-Frontal Pose Estimation

Araki Wakiuchi, Hikaru Sasaki, Takamitsu Matsubara

cs.RO ·submitted 2026-10-01 05:13 UTC · v2

Abstract

Robotic manipulation of labware is difficult when transparent or reflective objects must be identified and localized. Coded planar fiducials are a practical retrofit: easy to print, they leave the marked face flat and graspable. Yet a single planar tag is least reliable in near-frontal views, where perspective cues fade. Non-planar geometries restore those cues but intrude on the flat face that a parallel-jaw gripper must contact. Our idea is to tilt multiple tags within one compact footprint, so that each tag is seen at a non-frontal angle even when the marker faces the camera. We propose the quARtet marker, a 3D-printable fiducial embodying this idea: all detected corners of its four tilted AprilTags enter one Perspective-n-Point solve, and a shared configuration defines the fabricated geometry and the detector model. Because tilting consumes flat area, its three layouts trade pose-estimation consistency against graspability. In robot-referenced, same-setup fixed-camera experiments, all three layouts reduced the mean frontal orientation error from 2.18 degree for a single planar tag to 0.24-0.47 degree and the root-mean-square position error from 1.50 to 0.17-0.20 mm. A robot-mounted-camera pose-hold test confirmed this separation under closed-loop visual feedback. In swing-down trials under identical conditions, the two layouts with flat contact strips retained the object, whereas the layout without flat strips slipped about a hundred times more than a single planar tag. For the tested conditions, the results support a rule: the layout without flat strips when pose-estimation consistency dominates, a layout with flat strips when the marked face must remain graspable.

Closest papers

Nearest neighbours by meaning across the whole index.

A Head Camera Is (Almost) All You Need: An Electronics-Free UMI Glove Labelled and Observed by One Moving Camera

cs.RO cs.AI ·2026-10-20 ·Yosub Shin, Yuan Liu, Igor Molybog
similarity 0.63
Abstract

Handheld demonstration devices decouple data collection from the robot, but conventional designs burden the hand with a wrist camera, cables and a pose tracker (SLAM, an IMU, a VR controller, or a fixed external camera that the collector's body occludes), and burden the pipeline with as many data streams to timestamp, synchronise and cross-calibrate. We show that a single egocentric camera (USD 122) worn on the collector's head replaces the wrist camera, the pose tracker and their separate streams with one. It reads printed fiducials on an electronics-free glove (USD 22) against paper tiles taped around the workspace, giving the 6-DoF gripper pose and the jaw width from the same frames the policy will see; at deployment the same camera rides a low-cost (USD 120) arm beside the robot that mimics the collector's head from the robot's joint state. Against the robot's encoders the labels are accurate to 6.5 mm and 1.6 degrees median with 93-100% frame coverage, and a policy trained on them instead of encoders pays 3% in validation loss. Adding 194 glove demonstrations to 48 teleoperated episodes lifts rollout success from 10/25 to 17/25, level with 172 teleoperated episodes alone (18/25), and the full co-trained head-camera policy succeeds in 20/25 against 15/25 for the wrist-camera recipe, whose policies drop the object when the goal leaves their view, and 12/25 for a fixed camera.

0.14

Can a Display Be Used for Rapid LiDAR-Camera Extrinsic Calibration?

cs.CV ·2026-10-20 ·Zuhao Zou, Xiangcheng Hu, Jianhao Jiao, Jin Wu
benchmarkcode/data similarity 0.61
Abstract

ScreenCalib enables light detection and ranging (LiDAR)--camera extrinsic calibration using an ordinary programmable display, providing known visual markers and controlled geometry while reducing dedicated target preparation. The camera observes displayed AprilTags, whereas the LiDAR measures the physical screen surface and boundary, requiring indirect cross-modal association. Display geometry introduces association ambiguities, while indoor clutter complicates extraction. ScreenCalib addresses these challenges through tag-guided display extraction, geometric hypothesis generation and refinement, and surrounding scene edges for ambiguity resolution. The single-pose mode requires only one static placement. The joint multi-pose mode combines independent static observations through cross-pose consensus and jointly refines the shared extrinsics and tag scale, reducing sensitivity to tag-size measurement errors without requiring continuous motion or inter-pose trajectory estimation. Experiments in simulation and on three different sensor platforms cover mechanical and nonrepetitive LiDARs in clean and cluttered environments. Benchmark results show that ScreenCalib outperforms competitive calibration-board-based methods in translation accuracy. Joint multi-pose refinement further reduces mean rotation and translation errors across the three platforms and improves rendered-map alignment. Evaluation across readily available displays, including cell phones, tablets, laptops, computer monitors, and televisions, further examines ScreenCalib's versatility as a practical alternative to dedicated calibration targets. The source code is available at https://github.com/ZuhaoZou2026/ScreenCalib.

0.23

GraspHOI: Full-Body 3D Human-Object Reconstruction with Finger-Level Grasps from a Single In-the-Wild Image

cs.CV ·2026-08-28 ·Semin Kim, Haechan Shin, Jongyoo Kim
similarity 0.59
Abstract

Existing monocular full-body 3D human-object interaction (HOI) methods do not combine explicit finger-level grasp optimization with category-agnostic object reconstruction. Despite plausible body-object configurations, their fingers may float from or penetrate objects instead of forming a grasp. We present GraspHOI, the first framework that reconstructs a full-body 3D HOI from a single image while explicitly optimizing finger articulation against the reconstructed object. GraspHOI recovers object geometry directly, without predefined meshes or a fixed category vocabulary. It reconstructs the body, hands, and object separately, aligning them in metric camera space via depth-based registration and image-space alignment. Occlusion-aware palmar correspondences seat the object against the grasping hand, and contact-aware optimization refines arm and finger articulation to form surface contact without excessive penetration. Across four benchmarks and six baselines, GraspHOI improves relative human-object placement, hand accuracy, and contact plausibility. Full pipeline code will be released.

0.15

Object Pose: The Link between Weak Perspective, Paraperspective, and Full Perspective

cs.CV cs.RO ·2026-11-18 ·Radu Horaud, Fadi Dornaika, Bart Lamiroy, Stephane Christy
top venue similarity 0.59
Abstract

Recently, DeMenthon and Davis [4,5] proposed a method for determining the pose of a 3-D object with respect to a camera from 3-D to 2-D point correspondences. The method consists of iteratively improving the pose computed with a weak perspective camera model to converge, at the limit, to a pose estimation computed with a perspective camera model. In this paper we give an algebraic derivation of DeMenthon and Davis' method and we show that it belongs to a larger class of methods where the perspective camera model is approximated either at zero order (weak perspective) or first order (paraperspective). We describe in detail an iterative paraperspective pose computation method for both non coplanar and coplanar object points. We analyse the convergence of these methods and we conclude that the iterative paraperspective method (proposed in this paper) has better convergence properties than the iterative weak perspective method. We introduce a simple way of taking into account the orthogonality constraint associated with the rotation matrix. We analyse the sensitivity to camera calibration errors and we define the optimal experimental setup with respect to imprecise camera calibration. We compare the results obtained with this method and with a non-linear optimization method.

0.42

RoboCap: A New Platform for Egocentric Robot Learning

cs.RO cs.AIcs.CVcs.HC ·2026-10-05 ·Qasim Ali, Nikash Bhardwaj, Kheri Hughes, Sam Cho, Ethan Lee +13 more
similarity 0.59
Abstract

Despite its promise for scaling robot learning, egocentric manipulation data is still scarce today. Collection at scale requires vertically integrating ergonomic hardware with centimeter-precise 3D algorithms, at a precision that has not been publicly demonstrated. To address this gap, we introduce RoboCap, a 250\,g six-camera dual-IMU hat designed for in-the-wild egocentric data capture, and the Grounded API, a suite of device-agnostic 3D algorithms tuned for RoboCap. In this report, we demonstrate how hardware, calibration, and 3D algorithms interact to achieve state-of-the-art performance on the public benchmarks: our SLAM across diverse settings and rigs, our depth estimation on egocentric settings, and our hand tracking when adapted to third-party devices.

0.16

MonoEgo: Monocular Metric Egocentric Demonstration Capture with Passive Wrist Constellations and Sparse Workstation Anchors

cs.RO ·2026-09-28 ·Jie Xu, Kangjin Yu, Ziyi Jin, Beichen Wang, Zhongpu Xia
similarity 0.58
Abstract

Image-aligned metric demonstrations often require dedicated tracking hardware and synchronization across devices. We present MonoEgo, a capture system that replaces active wrist instrumentation with offline monocular reconstruction. One 90-FPS global-shutter camera observes calibrated passive wrist constellations, sparse workstation anchors, and the scene on a shared image clock. MonoTag SLAM combines marker corners with ORB geometry and uses visual evidence to reject ambiguous planar-marker poses. Its metric Atlas supports interval scale re-anchoring, verified map merging, and retrospective localization of earlier frames supported by the final map. Camera and wrist-constellation outputs retain validity and map provenance, and unsupported motion is left missing. Experiments show metric tracking beyond continuous anchor visibility, reconnection of supported map components, and recovery of some missing camera poses. Comparisons against a multisensor camera reference and separate stationary-constellation tests characterize trajectory agreement and precision while revealing incomplete coverage and residual geometric uncertainty. The results indicate that passive fixtures and offline reconstruction can reduce capture-side requirements. Dynamic accuracy, deployment, and downstream policy benefits require further study.

0.26

Curvature as a Baseline: Monocular Pose Measurement of Cylindrical Objects with Dual Colour Stripe Markers

cs.CV cs.RO ·2026-10-19 ·Jaesung Hong, Dong Won Lee
theory similarity 0.58
Abstract

Thin cylindrical objects offer little space for planar markers. We propose a dual-colour-stripe marker that uses the known curvature of an object to improve pose measurement with a single camera. The boundary between two colours provides a long centre line, while dots and printed edges supply features at different depths. We analyse how this depth separation improves the estimation of rotation about the cylinder axis, or roll. For a camera-facing marker at 15 cm, the Cramér-Rao lower bound on roll standard deviation is 2.00°for a flat marker, 0.38°for a single curved marker and 0.21°for a wrap-around marker. Monte Carlo roll RMS errors are within about 10% of the corresponding standard-deviation bounds. A first-order relation connects the sagitta of the curved marker to the roll sensitivity provided by a stereo baseline. The analytical and simulation results explain how curvature improves monocular measurement and provide a basis for designing marker geometry.

0.23

Towards Quadruped-Provided Localization and Active Tracking for Micro-UAVs

cs.RO ·2026-10-05 ·Alejandro Lorite Mora, Andrés Faíña
published similarity 0.58
Abstract · 12 pages, 5 figures. Submitted version (before peer review) of a paper accepted at CLAWAR 2026, Cranfield, UK, 14 to 16 September 2026. The …

Micro unmanned aerial vehicles (micro-UAVs) are small enough to reach confined spaces that larger robots cannot access, but too small to carry the sensing and computing power required for autonomous flight. We move the localization stack entirely off the aerial platform onto a quadruped robot with a 7-degree-of-freedom (DOF) arm, which supplies the micro-UAV (27 g bare, 42 g with fiducial markers) its full 6-DOF pose. A camera at the arm's end-effector detects AprilTag fiducial markers on the drone and composes that observation with the quadruped's own self-localization to place the drone in a shared map frame, so the ground robot localizes its partner, rather than only tracking it relative to the camera. The arm acts as an actively-controlled observer, repositioning to keep the drone in view as both robots move; the drone carries only an inertial measurement unit and fuses the external pose to fly commanded setpoints. In lab flights the external pose is accurate to 12-16 mm, enough to fly the drone autonomously within 2-5 cm of motion-capture-fed control. Having the quadruped actively follow the drone reduces the tracking error from 11.0 cm to 6.9 cm by holding the camera in the close range, where the markers are most accurate.

0.66