CS Paper Radar

LLM-Driven Multi-Agent Control for Skill-Based Smart Manufacturing

Kay Köhle, Darko Anicic, Thomas A. Runkler, René Graf

cs.MA cs.AIeess.SY ·submitted 2026-10-01 09:34 UTC · v1
published

Abstract

Factories are shifting toward smaller lot sizes with high product customization, requiring frequent re-programming of flexible and reconfigurable automation systems. LLM-based agents can be deployed in two complementary roles: Offline, they generate deterministic production sequences, reducing programming effort; online, they operate live machines and handle unforeseen runtime faults that static programs cannot anticipate. We propose a solution in which each factory module is paired with a dedicated LLM-based agent and an MCP tool server that exposes the module's skills via OPC UA method calls, with agents coordinating over MQTT and grounded by real-time updates of the factory state. We compare three agent architectures (orchestrator, peer-to-peer, and monolithic) across nine production challenges of increasing complexity in a simulation of a physical six-module hexagonal factory, including silent hardware fault detection. The monolithic and peer-to-peer architectures both achieve the highest mean solve rate (93\%), while the orchestrator uniquely resolves a silent conveyor-belt fault in all ten runs by autonomously rerouting plates around the blocked segment. All architectures exhibit emergent fault-diagnosis behavior without any explicit failure-handling logic, establishing standardized MCP tooling, MQTT-based inter-agent communication, and real-time state injection as a viable and reproducible foundation for LLM-programmed smart manufacturing.

Comment
Accepted at the 2026 IEEE 31st International Conference on Emerging Technologies and Factory Automation (ETFA). 8 pages, 5 figures, 3 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Industrial Agentic AI: LLM-Driven New-Generation Agents for Smart Manufacturing

cs.AI ·2026-10-18 ·Lei Ren, Haiteng Wang, Shixiang Li, Jing Zhang, Yuqing Wang +5 more
survey similarity 0.73
Abstract

Large language models (LLMs) are enabling agents to move beyond predefined workflows toward autonomous planning and execution, creating new opportunities for smart manufacturing. However, dynamic environments, complex physical constraints, and stringent reliability requirements hinder the direct deployment of general-purpose agents in smart manufacturing. This article presents a systematic overview of LLM-driven industrial agents. First, we analyze five key challenges and discuss the concept and core characteristics of industrial agents. We then establish a unified taxonomy covering application scenarios, embodiment forms, and five capability levels. Next, we propose a four-layer system architecture and detail its core modules and operational mechanisms for closed-loop task execution. Finally, we review representative applications across the industrial lifecycle and outline future research directions. This article provides a structured reference for the design, development, and application of industrial agents.

0.08

Tool-Calling LLM Agents Under Realistic MCP Faults: Scale Does Not Purchase Fault Tolerance

cs.SE cs.AI ·2026-10-23 ·Antonio Ken Iannillo, Joshua Segun Owotogbe, Roberto Natella, Francesco Avallone, Kristina Kudryavtseva +1 more
publishedcode/data similarity 0.62
Abstract · Accepted at NeurIPS 2026 (poster). 10 pages of main text plus appendices and the NeurIPS checklist. Code and data: https://gitlab.com/unilux…

LLM agents increasingly rely on external tools exposed via the Model Context Protocol (MCP), yet current benchmarks assume tools respond correctly and on time, leaving agent resilience to realistic tool failures untested. We introduce MCP-Injector, a drop-in, protocol-aware fault-injection middleware that interposes on the MCP tool-call path with controlled persistence (permanent, transient, intermittent) and seedable schedules. Its fault model is calibrated to the observed incident distribution (failure mode x persistence) of the public MCP ecosystem, mined from 57,240 issue and pull-request threads across 1,774 open-source MCP repositories. In a 1,350-cell experiment crossing two backbone sizes (20B, 120B), three agent stacks (custom multi-round plan-and-execute, OpenAI Agents SDK, LangChain), and three fault injection conditions, we find that faults drawn from this permanent-heavy stress profile cause severe quality degradation (task-completion score falls by 60%, from 8.08 to 3.23 out of 10), and that scale does not purchase fault tolerance for the two gpt-oss backbones we test: the 120B retains no larger share of its fault-free score under faults (resilience-ratio model, $p = 0.96$), and its completion rate under faults is, if anything, lower (91.1% vs. 95.6%; difference 4.4 points, 95% CI $[-0.2, 9.3]$). Agent stacks differ in how well they absorb faults, which suggests that framework-level error handling matters more than model scale. These results demonstrate that capability benchmarks alone can mask operational brittleness, motivating protocol-aware fault injection as a complementary evaluation dimension for tool-calling agents.

0.55

RAC: A Relational Agent Contract for Constraint-Governed Engineering Tasks

cs.AI ·2026-10-14 ·Kaiyuan Zheng, Fengqing Jiang, Yichen Feng, Zubin Aaron Assadian, Yuetai Li +4 more
similarity 0.60
Abstract

Engineering agents must produce artifacts that satisfy exact, coupled constraints. Existing solutions often require agents to make semantic decisions and also derive consequences such as precise geometry or timing from those decisions, leading to failures in constraint-governed engineering tasks. In this paper, we introduce RAC, a harness-agnostic contract for the action and feedback layer of engineering agents. It specifies authoritative observations, semantic actions, tool-based realization, independent verification, and repair evidence. The agent decides which relations an artifact should satisfy; specialized tools derive their concrete consequences. On PCB placement, routing, and repair tasks, RAC achieves the highest clean-pass rate for all nine evaluated models, averaging 90.9%, compared with 74.0% for the strongest baseline, requirements-only delegation. In job-shop scheduling, direct relational actions achieve 96.3% quality pass versus 59.6% for code-mediated delivery with access to the same scheduling backend. Our evaluations on 141 embedded-code tasks across four microcontroller identify the action contract as a source of agent capability: preserving semantic control while delegating mechanically derivable outputs improves the reliability of constrained artifacts.

0.24

Agent Mesh: Reliability Primitives for Non-Idempotent Agent Delegation - Identity Adequacy and Evidence Adequacy

cs.AI cs.DCcs.MAcs.SE ·2026-08-26 ·Mazhar Shaikh, Anurag Rajkumar Bombarde, Harshal Pathak
similarity 0.60
Abstract · 14 pages, 9 figures, 6 tables; 5-page ancillary supplement

Autonomous agents increasingly perform bounded software tasks under an orchestrator that retries, resumes, and budgets them. The machinery such orchestrators reach for is the service mesh's: retry, timeout, and error-rate circuit breaking. We report a failure study of a production agentic software-delivery platform over 147 numbered incidents spanning 81 runs, each with a measured cost and, in most cases, a mutation proof reproducing the failure. All three assumptions those primitives rest on are violated in practice, and we quantify the consequences: a loop of fifty-four consecutive successful tool calls no error-rate breaker could see; a progress signal constant by construction, guaranteeing a false trip on the third repair round and driving one run from six of six components to three; twenty-one events accumulated across six invocations of one delegation, making a correct, idempotent component unwinnable; a misrouted failure that woke five components for a two-component fault, leaving three bystanders regressing working code; and twelve incidents in which the enforcement layer blocked correct work, the most expensive costing 107 agent turns and zero accepted writes. We find one cross-cutting cause and its dual. Identity adequacy: in five separate subsystems an identity that failed to discriminate produced a confident wrong answer, and two of them derived the corrective rule independently. Evidence adequacy: a reliability decision may be taken only on evidence capable of moving, attributable to what it measures, and deterministic under identical conditions. From the findings we derive seven reliability primitives whose enforcement unit is the delegation rather than the message, and specify the controlled evaluation the study motivates but does not constitute.

0.19

When Messages Go Wrong: Understanding Communication Faults in LLM-Based Multi-Agent Systems

cs.SE cs.AI ·2026-10-11 ·Jinhao Zhou, Xiaoyu Zhang, Jiongchi Yu, Fahao Chen, Jun Wu
code/data similarity 0.59
Abstract · 21 pages, 11 figures, 3 tables. Code and experimental artifacts: https://github.com/SonGoKu21/mas_communication/ ; companion website: https:…

LLM-based multi-agent systems (LLM-MAS) use specialized agents that exchange messages to accomplish complex tasks. Their reliance on networked protocols, remote tools, and model endpoints exposes communication to message loss, delay, and context expiration. Because agents often exchange open-ended natural language, anomalies can alter task-relevant information while leaving messages processable, allowing semantic errors to propagate through subsequent interactions. Systematic studies of faults in inter-agent communication remain limited. This paper presents a large-scale empirical study of how communication faults manifest, propagate, and affect task outcomes in LLM-MAS. We construct a cross-layer taxonomy linking lower-stack disturbances to application-visible faults and develop a fault-injection and tracing pipeline. Our evaluation covers more than 29,000 executions across 100 tasks, five domains, three workflow topologies, and three model configurations. We find that 20.7% of failures with complete detection records occur without an immediate failure signal, reaching 76.2% for partial-content faults. Flat maintains 53.0% task success under communication faults, compared with 3.3% and 3.2% for Sequential and Hierarchical, respectively. This advantage primarily arises when an alternative information path preserves the evidence required by downstream agents. We also evaluate execution-side and evidence protection mechanisms and find that they recover different failure cases. Evidence recovery depends on whether trustworthy information remains accessible through an unaffected path. These observations provide empirical insights into communication-fault propagation, workflow resilience, and protection design for LLM-MAS.

0.31

Agentic AI-Assisted Modeling for Production Scheduling: Assessment in Constraint Programming

cs.AI cs.SE ·2026-10-07 ·Ángel Sánchez-Fernández, Javier Pernas-Álvarez, Diego Crespo-Pereira
hot direction similarity 0.59
Abstract · 29 pages, 9 figures

Developing optimization models for production scheduling requires substantial expert effort. Research on large language models (LLMs) has followed two directions: specialized approaches for automated modeling, mostly for mixed-integer linear programming, which often rely on dedicated training or problem-specific architectures that limit industrial deployment; and agentic artificial intelligence for operational decision support, which generally assumes that the optimization model already exists. This study bridges both directions by assessing whether general-purpose LLMs, orchestrated as agents without task-specific training, can formulate and implement constraint programming models from natural-language problem descriptions. Singleagent and multi-agent architectures are integrated with a Model Context Protocol server that provides context-aware retrieval of solver documentation to mitigate hallucinations during implementation. Both are compared with a direct LLM baseline on six industry-oriented problems covering flow-shop, job-shop, flexible job-shop and resource-constrained warehouse scheduling, using three LLMs and assessing modeling accuracy, execution success, latency and token consumption. Formulation proves largely within reach of current LLMs, whereas implementation is the main barrier. The multi-agent workflow raises the share of scripts that run correctly as generated from 14.8% with a direct LLM call to 59.3%, reaching 80.6% on the four less complex problems, while tightly coupled intralogistics models remain an open challenge.

0.26

Benchmarking AI Agents for Hardware Design Automation via MCP Tool Calling

cs.AI cs.SE ·2026-08-25 ·Leonardo Liparulo, Francesco Pierri
top venuebenchmarkcode/data similarity 0.59
Abstract

We ask whether AI agents powered by locally deployed large language models can reliably automate expert-defined hardware design workflows in an industry-realistic tool-calling setting. In these environments, engineers issue repetitive, dependency-ordered operations---such as creating components, adding ports, and wiring connections---through specialised tools. Confidentiality constraints on component specifications and naming conventions often preclude hosted proprietary APIs, motivating the use of locally deployed models. To study this setting, we build a Model Context Protocol (MCP) server that reproduces the state and dependency logic of a proprietary hardware design tool used in embedded system development and construct a benchmark covering single-operation edits, multi-step dependency chains, invalid requests, misspelled prompts, and multi-server tool contexts. We evaluate seven open-source models comparing pipeline choices including system prompts, tool-description detail, context scope, and single-agent versus multi-agent architectures. Results show that strong models can achieve near-complete expected-call coverage on the benchmarked workflows, but reliability depends strongly on both task structure and agent configuration. Comprehensive tool descriptions consistently reduce failures, few-shot prompting can cause severe inaction for some models, cumulative context harms constrained models, and multi-agent decomposition helps weak workers or long sessions at the cost of additional calls. These findings provide practical guidance for deploying local LLM agents in stateful hardware design environments.

0.47

Instant Software Factories

cs.SE ·2026-10-26 ·Wenxin Jiang, Mikola Lysenko
benchmark similarity 0.59
Abstract

Coding agents can quickly build prototypes, but a long tail of fixes, optimizations, tests, and releases separates a prototype from a product. A software factory handles this ongoing work through a repeatable process. We ask whether this work needs dedicated orchestration and how such factories should be judged. Given a tested repository and a coding agent, an instant software factory uses only two coordination inputs, a swarm of cron-job agents with standing objectives and a shared communication board, such as GitHub, where agents coordinate through the traces they leave. We developed a bootstrap prompt designed to set up both inputs from one round of human input, with governance as a separable layer. We distilled it from two manually configured industrial factories, observed for 15 and 17 days, and have not yet evaluated it. In the GitHub-coordinated CLI factory, daily merges rose 15x during agent rollout, an observed association. Its agents also filed 95% of new issues and authored 40 of 58 PRs that changed CI workflows, and at least 5.6% of issues marked as fixed were later found to have incorrect fixes. Unlike an agent scored on a fixed benchmark, a factory thus changes its own workload, evaluator, and measured progress. We formulate factory development as multi-objective optimization under this endogenous feedback. Over five months, we plan to evolve both factories, test the bootstrap on new repositories, and test five falsifiable hypotheses.

0.27