CS Paper Radar

ePACT: Energy-Performance-Aware Commitment Tracking for LLM Serving

You Peng, Youhe Jiang, Chen Wang, Binhang Yuan

cs.DC ·submitted 2026-10-01 14:32 UTC · v1

Abstract

Reducing LLM serving energy does not by itself guarantee lower deployment cost when electricity procurement exposes operators to unfavorable deviations from preset commitments. We study hourly commitments with positive, potentially asymmetric costs for overuse and underuse, and formulate energy-Performance-Aware Commitment Tracking: minimize deviation costs subject to request-level service requirements. We implement ePACT, a two-level controller that adjusts serving capacity and GPU clocks as requests arrive. A global planner updates interval energy targets from measured consumption and the remaining hourly commitment. A local decision maker predicts candidate configurations' energy and completion times, checks predicted deadline misses, and selects among admitted configurations by asymmetric target-deviation cost, with a service-first fallback. Coarse-to-fine action search runs asynchronously with serving. We evaluate ePACT through single-hour comparisons, controller ablations, and full-day trace simulations for H20 and H200 GPU pools. In the 24-hour simulations, ePACT reduces the asymmetric deviation cost by $73.8\%$ and $75.7\%$ relative to vLLM while retaining near-vLLM SLO attainment. Mean absolute hourly deviations are $2.16\%$ and $2.31\%$, respectively.

Closest papers

Nearest neighbours by meaning across the whole index.

eFAIR: Fair LLM Serving under Hourly Electricity Commitments

cs.DC ·2026-11-18 ·You Peng, Youhe Jiang, Chen Wang, Binhang Yuan
hot direction similarity 0.68
Abstract

Datacenters can procure electricity in day-ahead markets by committing to energy purchases for individual hours. For LLM services operating within these hourly budgets, maximizing aggregate throughput alone may still leave individual requests waiting or receiving much slower service than desired. Fair serving therefore requires improving service for poorly served requests while reserving electricity for later arrivals whose timing and demand are unknown. To compare service across requests, we define normalized throughput as each request's actual output rate divided by the product of its standalone throughput and its service entitlement, a positive weight representing its desired service level. Using this measure, we formulate fair serving as leximin optimization under an hourly electricity constraint, prioritizing requests with the lowest normalized throughput. To address this problem, we present eFAIR, an online scheduler that coordinates request dispatching, electricity budget allocation, and GPU frequency selection through a common normalized-throughput target. Specifically, request dispatching prioritizes requests by desired service level and progress; electricity budget allocation reserves electricity for current and expected future work; and frequency selection uses electricity savings to raise GPU frequencies for requests with higher desired service levels. Evaluations on H20 and H200 configurations, each with 32 replicas, show that eFAIR improves the tenth percentile of normalized throughput by 28.0%-31.0% over the best budget-feasible baseline, while keeping absolute deviations from the hourly electricity commitment below 0.26%. eFAIR also improves throughput balance among concurrent requests and aligns electricity allocation more closely with service demand over time. Together, these results demonstrate how eFAIR improves request-level fairness within an hourly commitment.

0.25

Adaptive KV Retention for LLM Agents at Human-Approval Timescales

cs.OS ·2026-08-31 ·Minseo Choi, Ananya Joshi
similarity 0.63
Abstract

Unlike the seconds-scale tool-call pauses targeted by prior agent-serving systems, agentic LLM requests can be suspended for minutes or hours while waiting for human approval. We study how suspension and resumption affect GPU serving performance and develop a retention policy that balances active-serving capacity against future recomputation under uncertain approval waits. The central tension is severe because retaining suspended KV preserves fast resume but can consume enough GPU capacity to reduce active-serving goodput by 41%, while evicting it avoids that residency cost at the expense of nearly $10\times$ higher resume latency when the request returns. We develop a tiered retention controller around GPU opportunity cost, which expresses the serving capacity consumed by preserving or reconstructing a suspended request's KV state in a common GPU-time cost. Within host memory, the controller selects between indefinite retention and load-indexed expiration using calibration wait samples, without requiring per-request wait prediction. On human-scale approval workloads, our controller improves active-request goodput by 23-51% over the vLLM baselines, 22-29% over MORI, and 41-52% over Continuum.

0.44

ContinuumBench: Benchmarking Joint Autoscaling and Placement Across Evaluation Regimes in the Cloud-Edge Continuum

cs.DC ·2026-09-08 ·Lanpei Li, Antonino Vaccarella, Vincenzo Lomonaco, Massimo Coppola
benchmark similarity 0.62
Abstract · This work was accepted and presented at the 6th workshop on Flexible Resource and Application Management on the Edge (FRAME) 2026, co-locate…

Cloud-edge controllers coordinate service placement, replica scaling, and resource pre-warming to keep end-to-end latency within application deadlines. But evaluations often obscure the source of a reported gain: placement and scaling are studied separately; workload, connectivity, and calibration assumptions remain implicit; and metrics over completed tasks hide unfinished work. We present ContinuumBench, a benchmark that controls these factors. Its completion-aware accounting treats late, unfinished, and discarded tasks as deadline misses. A common protocol compares placement-only and scale-capable controllers under declared regimes and stressors. Built on the ECLYPSE simulator, ContinuumBench adds arrivals, worker elasticity, intermittent transport, buffering, and failures to close the control loop. We evaluate nine controllers across four scenarios and two regimes. The studied regimes are capacity-bound: elastic capacity, not placement sophistication, drives completion, and once capacity suffices, the choice of autoscaling policy decides how much of that work arrives on time. Placement re-planning has no measurable effect without relocation, while cost-free migration defines the observed exception. Consequently, scale-capable controllers approach an over-provisioned reference while placement-only controllers degrade with load; and placement quality separates controllers only once capacity is exhausted. Finally, the accounting choice itself changes the reported result: completion-only and completion-aware scoring can rank controllers differently.

0.22

Scaling Shapley Energy Attribution to Large LLM Batches

cs.DC cs.ARcs.PF ·2026-11-10 ·Qi Luo, Ziwen Wang, Kunlin Li, Changxi Liu, Yun Chen
similarity 0.61
Abstract · 13 pages, 11 figures

LLM services have become essential infrastructure for applications such as chat assistants and coding agents. Service providers need to attribute resource consumption to individual requests for purposes such as billing. Among these resources, energy is a key metric for assessing the cost of serving each request. However, serving engines batch requests together, and GPUs report only aggregate energy consumption. Providers typically estimate each request's share in proportion to its token consumption, but this approach can produce substantially unfair estimates. The Shapley value provides a principled solution to fair energy allocation, but computing it directly requires $2^N-1$ GPU runs for $N$ requests, which is infeasible for large batches. To address this problem, we propose StepSplit. Across GPU generations, we observe that the energy consumed by each inference step, a forward pass over a batch, consists of a shared energy, largely due to reading model weights, and a request-specific energy. We derive a closed-form Shapley value: each request is charged its own energy plus an equal part of the shared energy of every step in which it participates. A microbenchmark of 2.5-17.8 minutes calibrates both parts of the step energy once per model and GPU configuration. Under static batching, StepSplit uses this closed form in a single pass over the scheduler log. Under continuous batching, removing a request can change how the remaining requests are batched, so StepSplit adds a correction to the closed form, computed by replaying the scheduler on a CPU. We evaluate StepSplit against Shapley values measured using 529,513 GPU runs. Under static batching with batch sizes of 8-256, StepSplit achieves an $L_1$ error of 0.4-4.3%, compared with 13.4-61.3% for token-proportional allocation. Under continuous batching with 8-128 requests, the corresponding errors are 0.5-6.4% and 20.6-71.7%.

0.24

Lightweight Scheduling Policies for Continuously Batched LLM Serving Across GPU Architectures

cs.DC cs.LG ·2026-10-11 ·Ashman Mehra, Akshan Agrawal, Aryeh Carmi
similarity 0.61
Abstract

Large language model serving is increasingly limited not only by model size and GPU speed, but also by scheduling during autoregressive decoding, where continuous batching interleaves requests at token granularity as sequences arrive and finish. We study whether lightweight scheduling policies can improve latency-throughput tradeoffs without changing model architectures, kernels, or deploying learned schedulers. We implement a Python/PyTorch continuous-batching testbench with real Hugging Face execution and evaluate eight policies across 1,152 GPU-model-scheduler-workload runs using ShareGPT-derived traffic, six Qwen, Gemma, and Mistral models, and Modal L40S, A100, and H100 GPUs. Scheduler choice changes throughput, TTFT, completion latency, and tail behavior under fixed model, GPU, workload, batch size, and prefill budget. Aging shortest-prompt-first is the strongest practical baseline in many L40S and mixed-workload settings, while oracle remaining-length scheduling shows that job-size knowledge alone is insufficient because batching and hardware effects also shape performance. The custom dataset has been uploaded to Hugging Face.

0.12

State-of-Charge Targets for Storage Participation in Two-Settlement Markets: Reliability, Price, and Compensation Impacts

eess.SY ·2026-11-13 ·Yichen Li, Alexandre Moreira, Ruiwei Jiang, Miguel Heleno, Julie Mulvaney-Kemp
hot direction similarity 0.61
Abstract

As energy storage assumes a larger role in electricity systems, market operation must coordinate its use across time to support reliability during periods of system stress. Minimum state-of-charge (SOC) targets provide a means of preserving energy for these periods, but their design shapes reliability, operating efficiency, and storage compensation. This paper evaluates alternative SOC target designs in a California-based day-ahead and real-time electricity market model. The comparison examines targets based on day-ahead schedules or rolling centralized dispatch, enforced at the individual-resource or system level, across seasons, stress conditions, and participant information settings. The results show that retaining more energy does not necessarily reduce load shedding: targets that restrict discharge can limit storage support during shortages. Under critical summer conditions, individual targets derived from rolling centralized dispatch reduce weekly load shedding by approximately 83--84\% relative to operation without targets. Lower RT clearing costs and average prices can coexist with higher storage compensation, reflecting the role of day-ahead positions and real-time deviations in determining settlement outcomes. These findings highlight the importance of coordinating energy retention with timely discharge and network deliverability when designing SOC requirements for storage participation in electricity markets.

0.25

Characterization of Request and Token Energy Costs for LLM Inference Workloads on GPU Platforms

cs.PF cs.DCcs.LG ·2026-08-28 ·Prabhu Vellaisamy, Vanessa Lam, Shawn Blanton, John Paul Shen
publishedhighly cited similarity 0.61
Abstract · Accepted at the 2026 IEEE International Symposium on Workload Characterization (IISWC 2026). 13 pages, 6 figures, 9 tables

Large language model (LLM) inference serving is priced by tokens, but GPU energy is consumed over inference windows. This accounting mismatch makes token-normalized metrics incomplete, since average output-token energy can decrease even when total request energy increases. We characterize this behavior with a decomposed energy model: a fixed one-time prefill with a fixed generation setup cost, while each output-token generation step adds marginal step energy. We evaluate this LLM inference energy model on NVIDIA H100 and H200 GPUs across dense and mixture-of-experts (MoE) models, reporting both request energy and token energy as functions of model type (M), phase (P), batch size (B), context length (C), and output length (N). For Llama-3.2-1B on H200 at batch-16 and context-4K, increasing output length from 10 to 512 tokens reduces token energy from 7.46 to 0.72 J/token while total batched inference-window energy increases from 1.19 to 5.93 kJ. Batching also reduces token energy, but the gain is context-bounded: at 10 output tokens, the batch-16 to batch-1 gain falls from 6.31x at context-512 to 1.17x at context-4K. MoE models amplify this effect: sparse routing and fragmented expert execution increase fixed energy at low concurrency, while batching spreads that energy across more generated tokens and substantially narrows the dense-vs.-MoE token-energy gap. These results show that energy-aware serving should jointly optimize both request energy and token energy, rather than only reducing per-token energy cost.

0.44

Latency-Aware Orchestration for Multi-Agent LLM Workflows on Heterogeneous GPUs

cs.DC ·2026-09-03 ·Jinghao Wang, Yifeng Zhang, Xiao Zhou, Yao Lu, Yihui Zhang +5 more
similarity 0.60
Abstract · 13 pages, 7 figures

Concurrent multi-agent workflows expose future dependencies and serving-state requirements while running on heterogeneous GPU pools with time-varying load, model residency, and resource availability. The logical workflow defines the required computation, whereas its physical scheduling units, model-lifecycle actions, resource ordering, and placement must be selected according to the observed pool state. We present a prediction-guided runtime that uses workflow forecasts to construct and optimize a physical execution graph. Predictor estimates device-specific activation latency, peak memory, and model-loading cost, then propagates these predictions through workflow dependencies to forecast activation readiness and future model demand. Constructor builds semantics-preserving fusion and model-lifecycle alternatives, while Scheduler jointly optimizes their selection, placement, and execution order based on the live pool state. Across a workload spanning three workflow scenarios on a heterogeneous GPU pool, our system reduces end-to-end makespan and overall p95 completion latency under burst arrivals by up to 36.8% and 25.9%, respectively, over state-of-the-art workflow schedulers. It also saves up to 24.63 GPU-s per completed session.

0.21