CS Paper Radar

Calibrating the Checksum: An Empirical False-Positive Bound for One-Sided ABFT on bfloat16 GEMM, and What It Fails to Catch

Gautam Khosla

cs.AR cs.DC ·submitted 2026-09-29 06:22 UTC · v1
code/data

Abstract

Algorithm-based fault tolerance detects corrupted matrix multiplications by comparing a checksum of the product against a checksum recomputed from the factors, flagging a fault when the residual exceeds a threshold. The classical threshold is tau = Ku, derived from a dot-product rounding bound that requires Ku <= 0.01. At bfloat16 with contraction length K = 4096, Ku is approximately 32, so the bound does not hold and the threshold is not defined. Prior work therefore evaluated checksum ABFT only at float32. We supply the missing calibration. This paper is a characterization of a detector under an output-level, post-GEMM perturbation model; it is not a characterization of faults in silicon, and no rate reported here estimates fault incidence in deployed hardware. We fit a Generalized Pareto distribution to 7.99e7 clean per-row residuals and extrapolate a threshold at a per-GEMM false-positive rate of 1e-6, obtaining 3.1445e-6, which sits between the two clean sample maxima we observed. The independence assumption behind the per-GEMM conversion is checked empirically rather than asserted, at a variance ratio of 0.985 against a binomial reference. Against this threshold the detector catches 304 of 400 single exponent-bit flips (76%), failing a bar of 90% that was registered before any data was collected, and catches 0 of 600 low-mantissa flips. Detectability is invariant in K across a 16x range even though the clean noise floor falls as K^-0.4999: signal and floor scale together, so bit position governs detectability and contraction length does not. This falsified the mechanism the study was designed around. We report four registered predictions that failed, including that one, and four retractions of our own earlier findings, two of which were caught by pre-publication audit rather than by prediction. Code, data, and timestamped pre-registration documents are released.

Comment
15 pages. Code, data, and pre-registration documents at https://github.com/GautamTalksDev/assay-gpu (tag v0.1.1-paper). Also available at doi:10.5281/zenodo.22054179

Closest papers

Nearest neighbours by meaning across the whole index.

Sketching the Error, Not the Product: Post Hoc Fault Recovery for Half Precision GPU Matrix Multiplication

cs.DC ·2026-09-17 ·Pranav Napolean, Vikas Srivastava, Napolean Periathambi
similarity 0.71
Abstract

Silent data corruption (SDC) from defective accelerators now interrupts large scale training, yet deployed mitigations act on whole nodes. Algorithm based fault tolerance (ABFT) for a single GEMM has to be fused into the kernel or encode the operands, and it localizes at most one error per checksum. We present FP-Sketch, a verifier that runs after an unmodified tensor core GEMM whose half precision operands are accumulated and delivered at FP32. A sum sketch detects corruption on every call. Hashed first moment sketches, confirmed by independent recomputation, then localize several corrupted entries with no false positives by construction, and each fault yields a coordinate and a magnitude for fleet diagnosis. In floating point, sketch noise rather than bucket collisions limits localization. We measure that noise and find that its constant depends on the BLAS and the operand format and that the bucket count must grow as $n^{2.57}$ for a square product. Sizing the bucket count by measured noise rather than by a fitted power of $n$ raises recovery on eight transformer shapes from 0.402 to 1.000, and measuring the noise at run time adapts the bucket count to the kernel and the model. Instruction level injection with NVBit shows that upsets in a live accumulator are often only 2 to 9% of a typical entry, a population that output side injection cannot produce. Output side injection recovers every fault, while under NVBit the same engine sized for faults of typical magnitude recovers 0.550, and sizing for the measured magnitudes restores 1.000. On Llama-2-7B, guarding the MLP down projections removes 99.4% (BF16) and 99.9% (FP16) of the perplexity damage caused by 2048 bit flips, and the clean path probe costs 0.78 to 3.06 ms against GEMMs of 0.35 to 12.47 ms.

0.09

Deterministic LLM Inference Across GPU Kernels: Power-of-Two INT8 Quantization Scales and the Limits of Tolerance-Based Conformance

cs.LG cs.SE ·2026-08-25 ·Teng-Ruei Chen
similarity 0.67
Abstract · 9 pages (IEEEtran two-column), 3 figures, 5 tables. Fault injection against a two-stage-pinned prediction matrix (8,232 scored cells; 63-cel…

Conformance suites for quantized GEMM kernels ask whether two implementations agree within a tolerance. We measure what such a suite can detect. Injecting nine faults into a reference INT8 pipeline over 8,232 layer--fault--regime cells of Qwen3-1.7B, we find that every one of five epilogue faults -- scale precision, double rounding, multiplication order, output truncation, fused ordering -- moves the output by at most a single bfloat16 spacing, and by exactly one whenever it moves it at all, across 5,880 cells. A tolerance of one spacing is therefore blind to the entire class by construction: four of the five faults are detected by no check in the suite, and the fifth only under power-of-two scales. Faults that violate the accumulator's exactness preconditions, or that break operand sharing, are detected without exception, and a null fault never fires. What a tolerance-based suite of this shape establishes is therefore narrower than interchangeability: that the preconditions hold, that operands are shared, and that differences stay within one spacing. The power-of-two constraint that exposes the one detected fault is also deployable. Requantizing every weight scale to its nearest power of two makes CUTLASS and Triton agree bitwise at every linear layer (196/196 and 252/252, against 8/196 and 10/252 under the checkpoints' own scales) and yields byte-identical generated token sequences at 1.7B, 8B and 14B (8/8 prompts, against 0/8 at all three). Observed perplexity point estimates are +0.32%, -0.28% and +0.48%; the 90% intervals cover zero at the two smaller sizes but not at 14B, reaching +0.71% and +0.76%. A previously reported +157% perplexity for this intervention was an artifact of a probe that rewrote scales without requantizing the weights; separating the effects attributes 99.8% of it to the resulting weight--scale mismatch rather than to the power-of-two constraint itself.

0.30

Syndrome Decoding for Silent Data Corruption in Quantized Integer GPU Arithmetic

cs.DC ·2026-09-17 ·Pranav Napolean, Vikas Srivastava, Napolean Periathambi
similarity 0.66
Abstract

Quantized neural network inference runs integer matrix multiplications on GPU tensor cores, and the INT32 accumulators inside those cores have neither parity nor ECC. A transient fault in this datapath returns a valid but wrong integer and raises no interrupt. Checksum based Algorithm Based Fault Tolerance (ABFT) can detect such silent data corruptions (SDCs), but its verdict is binary. It cannot identify the corrupted element or its magnitude, and unweighted row and column checksums are blind by construction to errors that cancel on both axes. We present SProbe, a trailing verification kernel that reads the output of an unmodified vendor GEMM. A randomized Freivalds gate with three independent evaluation points in a 61 bit prime field misses a nonzero error with probability at most $2^{-141}$. When the gate fires, per row power sum syndromes over three primes are decoded with the Reed Solomon chain of Berlekamp Massey, Chien search, and Forney, recovering the column and exact magnitude of up to four colliding errors per row. SProbe then repairs the accumulator in place or recomputes the GEMM. On an NVIDIA H100, SProbe detects every injected fault across seven fault classes and four matrix sizes, including constructed patterns that TR-ABFT never detects and patterns that a weighted grid code detects but cannot correct. The gate costs 49% of the cuBLASLt GEMM time at N=16384 and 11% at N=65536. In an INT8 medical LLM, protection eliminates all observed silent corruptions at a 30% throughput cost. Our measurements also show that recomputation is faster than in place recovery in every configuration we tested, that diagnosis rather than repair dominates recovery cost, and we report the defects we found while validating the verifier itself.

0.25

Revisiting Cauchy-Schwarz Norm Bounds for SDC Detection in LLM Inference

cs.DC ·2026-10-13 ·Anton Altenbernd, Dylan Everingham, Philipp Wiesner, Odej Kao
similarity 0.64
Abstract

Large Language Models (LLMs) execute billions of floating-point operations per output token across many hardware accelerators. At this scale, hardware-induced faults can bypass system-level detection mechanisms and cause Silent Data Corruption (SDC). Algorithm-Based Fault Tolerance (ABFT) is the state-of-the-art technique for protecting matrix multiplication from such faults, but it incurs non-negligible computational overhead and requires thresholds to distinguish hardware-induced errors from floating-point roundoff. In this paper, we revisit Cauchy--Schwarz Norm Bounds (CSNB) as a low-overhead alternative for detecting SDC during LLM inference. We compare CSNB against ABFT through controlled fault injection and evaluate the runtime overhead of both verification and threshold determination across multiple model sizes, batch sizes, and generation lengths. Our results show that, on average, CSNB retains 99% of the fault detection capability of ABFT for the evaluated linear layers in dense LLMs, while reducing verification overhead by 87% and threshold determination overhead by 67%. For Mixture-of-Experts (MoE) router gate computations, however, CSNB retains only 55% of the fault detection capability of ABFT. These findings suggest that CSNB is a promising low-overhead alternative for protecting linear layers in dense LLMs, while checksum-based verification remains preferable for the evaluated MoE router gate.

0.13

Measuring the Checker: Mutation Analysis for GPU-Kernel Benchmark Oracles

cs.LG cs.PL ·2026-09-02 ·Mingzhe Du, Anh Tuan Luu, Dong Huang, See-Kiong Ng
benchmarkcode/data similarity 0.61
Abstract

Benchmarks for LLM-generated GPU kernels decide correctness with a few random inputs and a loose floating-point tolerance, and their verdicts now feed leaderboards and reinforcement-learning rewards. Recent work agrees these checkers are weak and patches them by hand---extra input distributions, fuzzing recipes, tighter tolerances---with no way to \emph{measure} whether any patch suffices. We introduce mutation analysis as an adequacy metric for kernel-benchmark oracles: deterministic rules inject 10{,}303 compilable faults into verified CUDA implementations of 188 KernelBench problems, 7{,}384 of them with an independent kill witness; any test protocol is scored by the fraction it detects. The official check misses \textbf{one in six} witnessed faults (16.9%), deterministically, and the misses are skewed by family: 8.7% of arithmetic faults escape, but 78.6% of precision faults do. The metric explains why (a tolerance blind band growing with reduction size; a measured ceiling on input aggressiveness set by legitimate floating-point variance), audits the strongest existing patch (KernelBench-Verified's gain splits into $+4.0$ points from hidden inputs and $+4.5$ from tighter tolerance, a split its authors could not compute), and exposes a published fuzzing recipe that rejects \emph{correct} kernels 107 times. Optimizing suites over the kill matrix reaches 98.0% detection with two inputs per problem (94.8% held-out), and the measurement's fault taxonomy teaches a test generator more than the raw faults themselves. Across 48 whole architectures, the blindness grows with scale, concentrating in deep homogeneous pipelines, and two problems prove unrefereeable: their official references violate the benchmark's own tolerance against fp64. We release everything as \href{https://huggingface.co/datasets/Elfsong/KernelBench-M}{KernelBench-M}.

0.43

Providing Accuracy Guarantees for the Fixed-Point Emulation of Matrix Multiplication

cs.MS cs.DC ·2026-11-13 ·Cole Brower, Peter Caday, John Gunnels
theory similarity 0.56
Abstract · We plan to submit to TOMS, but have not done so

Fixed-point methods such as Ozaki-II emulate double-precision matrix multiplication (GEMM) on fast low-precision hardware. Software that chooses the mantissa bit count automatically is numerically safe when the emulated product keeps the error guarantee of the floating-point GEMM it replaces. We analyze the worst-case and average-case error of fixed-point and floating-point dot products, define exponent span capacities that determine the extra mantissa bits an input requires, and approximate them with a low-precision GEMM. We prove that 53 bits plus such a capacity and a small constant preserve the classical worst-case error bound for a floating-point dot product, and we demonstrate this guarantee in software on several test cases. In a developer build of cuBLAS on an NVIDIA B200, each implemented bit-count rule earns grade~A on Test~2c of ``Grading the BLAS'' at every size and exponent range tested, falling back to double precision at the widest ranges; in exact arithmetic, the bound holds on every adversarial and random input tested.

0.32

A Contract-Grade Verifier for LLM-Generated GPU Kernels, and a Native Blackwell Backward for the Gated-Linear-Recurrence Family

cs.LG cs.ARcs.DC ·2026-08-13 ·Rishi Shah, Rishav Shrestha
benchmark similarity 0.54
Abstract · 20 pages, 3 figures. Also archived at doi:10.5281/zenodo.21563213

Systems that generate GPU kernels with language models report high correctness rates. Those rates come from a single loose test: run the kernel on a few random inputs at one fixed shape and accept it if the output is close to a reference. A kernel can pass that test and still be silently wrong. It can return an ordinary number where the true answer is a NaN or an infinity, differ from run to run, break when the shape changes, or accumulate in fp16 where the reference keeps an fp32 total. We build the instrument that checks correctness properly: a contract-grade verifier of twelve adversarial gates, each a property a correct kernel must satisfy, several of them tolerance-free, so no choice of threshold can explain a failure away. Aimed outward, the verifier audits 2,638 machine-generated kernels that a public system's own harness had already accepted as correct. It finds 39.5% broken beyond any tolerance argument and 62.1% carrying at least one violation. The field's standard test accepts 1,487 kernels the verifier rejects, against only 14 the other way. We defend the finding four independent ways: a 7/7 positive control, a threshold-calibration sweep, 98.5% agreement with the reference benchmark's own correctness code, and a stratified hand-audit. Aimed inward, the verifier judges a kernel of our own: the first native Blackwell tcgen05 training backward for the gated-linear-recurrence (GDN) family, including the reverse-state stage the field still runs on a fallback. We establish its correctness independently, against a double-precision oracle, and train five family members through it. The correctness signal behind reported progress in kernel generation is far weaker than the numbers suggest, and a set of tolerance-free contracts would close most of the gap.

0.48

Automated Multi-Line Bug Repair Using Model Checker Aided LLMs: A Case Study on RISC-V Processors

cs.AR cs.SE ·2026-10-23 ·Debleena Das, Chandan Kumar Jha, Muhammad Hassan, Rolf Drechsler, Ansuman Banerjee +2 more
similarity 0.53
Abstract

Functional verification of Register-Transfer Level(RTL) designs has become a critical bottleneck in modern semiconductor development, often consuming the majority of project resources. Debugging, in particular, remains an especially time-consuming task, requiring careful analysis of simulation traces or counterexamples. Recent work has explored applying Large Language Models (LLMs) to RTL debug and repair with great promise. However, the existing approaches typically are for single-line bugs, operate in open-loop, rely heavily on prompts or retrieval, lack scalability, and often produce incorrect fixes. In this paper, we propose a novel automated RTL bug repair methodology that combines LLMs, assertions, and a model checker to provide scalable, trustworthy semantic grounding and formal guarantees. Concretely, the methodology leverages failing assertions to guide the LLM in generating patches for multi-line bugs. Each candidate patch is formally verified using a model checker (JasperGold), ensuring only valid repairs are accepted. We evaluate the efficacy and scalability of our methodology on the BRISC-V RISC-V core using mutation testing, introducing several mutation types, and demonstrate that our methodology can repair up to 98% of single-line RTL bugs and 93% of the multi-line bugs. To the best of our knowledge, this is the first work to show automated, LLM-assisted RTL multi-line bug repair results on a complex RISC-V processor design in a scalable manner.

0.43