CS Paper Radar

The Surprising Effectiveness of Shared Memory in Looped Transformers

Giovanni Monea, Keshav Ramji, Yousef El-Kurdi, Luis A. Lastras, Yoav Artzi, Nathan Godey, Ramón Fernandez Astudillo

cs.LG cs.AI ·submitted 2026-10-01 19:05 UTC · v1
highly cited

Abstract

Looped Transformers apply the same layers several times per token, adding compute to improve quality without more parameters. Each recursion, however, writes its own key-value cache, so memory still grows with compute. Inference-time techniques can shrink this cache at a cost in quality. We pretrain looped language models to share memory: only the first recursion writes a cache, and later recursions read it while keeping a short window of their own. Surprisingly, we find that sharing memory does not cost quality and instead improves it. At 150M-1B parameters, our Looped Prediction Transformer (LPT) and its hybrid variant set a new quality-memory frontier for looped models: with five recursions, the hybrid lowers validation perplexity on FineWeb-Edu by 1.12-1.82 relative to a same-size standard Transformer while using 76-79% less context memory. Through an extensive analysis, we investigate why memory sharing helps. Shared and local memory develop different representations, and later recursions attend mostly to the shared memory, which also acts as a gradient highway to the first recursion.

Closest papers

Nearest neighbours by meaning across the whole index.

LSTM-Style Looped Transformers with Shared KV Caches

cs.LG ·2026-10-23 ·Andreas Kirsch
similarity 0.77
Abstract · 12 pages + 14 pages appendix

Recurrent transformers reuse weights to perform deep computation with fewer parameters. We study an LSTM-style transformer that also shares one key--value cache across its recurrent core. At width 1024, it uses 40.4% fewer parameters than an untied control at nearly matched forward FLOPs, and reduces persistent cache sets from fifteen to four. Parallel training supplies cache entries from a standard-attention pass, whereas continuation reads entries produced recursively using shared attention. We address this mismatch by aligning the two training passes' cache entries with a consistency loss during the final 10% of a fixed training-token budget. Across three model widths on FineWeb, this removes 81--89% of the continuation-loss penalty relative to full-cache evaluation. The improvement replicates on disjoint documents for two training seeds. Across four widths and 1.05--4.19B training tokens, the loss cost of weight tying is smallest at lower token budgets, suggesting an opportunity to use recurrent computation when data and model storage are limited.

0.32

How to Loop Your Transformer: Loop Scaling, Specialization, and Parallel Inference

cs.LG cs.AI ·2026-10-29 ·Chanakya Ekbote, Artidoro Pagnoni, Devendra Singh Sachan, Shruti Bhosale, Mike Lewis +3 more
similarity 0.74
Abstract · 149 pages with appendix. Prerpint

Looping in transformer models reuses weights by repeatedly applying the same transformer, or parts of it, making the model deeper without increasing its parameter count. Whether looping is useful depends on which constraint dominates: model size, training compute, or autoregressive inference efficiency. We study these trade-offs jointly in dense decoder-only transformers trained from scratch, varying which parts of the model are looped, how many loops are applied, and how information is passed between loops. Our experiments span models with up to 1B parameters, trained on up to 155B tokens with up to $1.07\times10^{21}$ FLOPs and 32 loops. We find that looping the full transformer generally gives the strongest quality at a fixed parameter budget, whereas looping a middle block of layers gives a better return when training FLOPs are constrained. Adding loops is not uniformly beneficial: gains eventually saturate, reverse, or become unstable. This motivates asking whether forcing every loop to use the same weights limits the benefit of deeper looping. We address this by adding small loop-specific low-rank adapters that improve quality, with larger gains as more loops are added. Looped transformers also suffer a decoding slowdown proportional to the number of loops. Parallel Loop Transformers address this by passing hidden states between loops across adjacent token positions, allowing loop stages to run concurrently. However, in our experiments the original formulation does not consistently retain the quality gains of ordinary looping. We find that preserving the current-token embedding and separately normalizing it and the previous-token hidden state before combining them recovers strong performance across model scales and training budgets. Together, these results show that effective looping requires matching the design to the resource constraint and inference setting.

0.13

FlashLoop: Fast and Memory-Efficient Looped Transformers via Lazy Updates

cs.LG ·2026-09-24 ·Wanqi Yang, Shiwei Liu
highly cited similarity 0.73
Abstract · 15 pages, 9 figures

Looped Transformers have attracted substantial attention as a parameter-efficient approach to increasing computational depth through repeated application of shared Transformer blocks. However, their practical advantages over conventional Transformers remain under debate: each additional loop incurs another Transformer pass and requires caching another set of KV states, causing inference FLOPs and KV-cache memory to grow continuously with loop depth. This overhead becomes particularly severe at large loop counts and long context, preventing the parameter efficiency of Looped Transformers from translating into practical inference efficiency. In this paper, we find that much of the additional computation and storage introduced by looping is redundant. As recurrence proceeds, state changes become increasingly concentrated on a small subset of tokens; attention-output differences are dominated by a sparse and stable subset of key columns; and KV residuals between adjacent loops become progressively more amenable to low-bit quantization. Building on these observations, we introduce FlashLoop, a training-free inference framework that reduces cross-loop redundancy through token-sparse updates, sparse attention, and KV-residual quantization. Across several Looped Transformers models, FlashLoop delivers lossless accuracy while achieving up to 1.64$\times$ end-to-end speedup and up to 6$\times$ KV-cache memory reduction, substantially improving the practicality of scaling Looped Transformers to greater computational depths and longer context.

0.49

Multi-Branch Transformer

cs.LG cs.CL ·2026-11-15 ·Gaotang Li, Lingjie Chen, Chunyuan Deng, Zhiwei Xu, Hongzheng Chen +4 more
community pick similarity 0.72
Abstract · Project: https://gaotangli.github.io/project_page/Multi-Branch-Transformer/

Transformer language models are commonly scaled by making their blocks wider or stacking them deeper. In this work, we explore a complementary path: branching, the parallel composition of full Transformer blocks. We introduce the Multi-Branch Transformer (MBT), which processes the input through shared initial layers, executes independently parameterized branches of sequential blocks in parallel, and fuses their outputs before shared final layers. At comparable training compute, we study three MBT variants: Wide-Shallow preserves block width, Narrow-Deep preserves sequential depth, and Balanced interpolates between them. In controlled pretraining experiments at four mixture-of-experts scales (0.8B to 2.1B total parameters), 2-branch Wide-Shallow MBTs consistently outperform sequential Transformers under matched parameter and training-compute budgets. Balanced MBTs improve further and retain comparable quality as the number of branches increases. To improve inference efficiency at long contexts, we introduce Joint-KV, which constructs a shared KV cache from branch representations at each depth. Our final recipe combines Balanced MBTs with Joint-KV, supported by an inference engine that exploits branch grouping and shared-cache reuse. Fitted scaling curves indicate that standard Transformers require up to 1.26x as much training body compute to match our final models' validation loss. These models reduce full-model KV-cache storage by up to 34% and deliver up to 51.4% higher decoding throughput on a single H200 GPU. Ablation studies show that branching yields gains beyond changes in width and depth, enables an effective KV-sharing strategy (Joint-KV), remains robust across fusion functions, and performs best in the middle layers. These findings show that branching offers a practical path for scaling language models toward both better modeling quality and faster inference.

0.37

Decoding Looped Transformers Better for (Almost) Free

cs.LG ·2026-10-01 ·Weihao Liu, Huangjie Zheng, Tianrong Chen, Rohit Dilip, Richard He Bai +3 more
similarity 0.72
Abstract · 32 pages, 19 figures

Looped Transformers achieve parameter efficiency by repeatedly executing a shared block across recurrent loops. Each loop yields an intermediate representation decodable for the same next token, yet standard decoding discards earlier states. Because earlier loops embody less computation, recurrence inherently supplies aligned weak-and-strong prediction pairs without auxiliary models or external training. We introduce LoopCD, a training-free contrastive decoding framework that guides token selection by contrasting the final prediction with an earlier recurrent pass, operating either in logit space with one extra output pass (LoopCD-Logits) or in hidden-state space with zero output overhead (LoopCD-Hidden). Across four looped Transformer families, LoopCD delivers substantial, consistent gains at full recurrent depth: LoopCD-Logits raises Ouro-2.6B-Thinking's AIME 2024 pass@1 from 61.88% to 73.33%, while LoopCD-Hidden lifts Huginn's HumanEval pass@1 from 22.56% to 31.71%. Crucially, these performance gains enable halving the number of recurrent loops while still matching or exceeding full-depth unguided baselines, reducing forward FLOPs by 22.5% to 48.2%. By transforming intermediate recurrent states into effective guidance signals, LoopCD achieves superior decoding quality while substantially reducing inference compute.

0.42

Rectified Looped Transformer

cs.LG cs.AI ·2026-11-12 ·Musheng Li, Jiawei Zhang, Ziyuan Liu, Yuantao Gu
similarity 0.71
Abstract

Looped Transformers increase effective depth by repeatedly applying a shared block, offering a parameter-efficient approach to language modeling. However, most existing works directly reuse each loop's output as the next's input, which can lead to hidden-state scale growth and perturbation amplification as recurrence deepens. We propose Rectified Looped Transformer (RLT), which redesigns feedback between loops using an interpolation schedule inspired by flow-based modeling. At each loop, RLT forms the next input by linearly interpolating between the current state and its prediction. Such interpolation distributes state changes across loops, encouraging a smoother trajectory from the initial input to the final output. Theoretical analysis proves that, under appropriate assumptions, RLT keeps state magnitudes uniformly bounded across loops and reduces the worst-case perturbation amplification. We evaluate RLT on language modeling corpora and downstream benchmarks. At matched training and inference depths, RLT consistently achieves lower perplexity than a standard looped Transformer, while exhibiting greater robustness to input perturbations and variance in inference depth. Consistent with the theoretical results, latent trajectory analysis shows that RLT maintains more stable hidden-state norms across loops, which also facilitates extrapolation-based decoding strategies. Notably, RLT achieves these gains without requiring additional trainable parameters or extra recurrent block evaluations, thus providing a simple yet more stable feedback mechanism for looped Transformers.

0.14

Persistent Recurrent Memory Between Transformer Layers - Improves Language Model Generalization

cs.CL ·2026-09-15 ·Eduardo Novaes Hering
similarity 0.71
Abstract

We introduce a simple architectural modification to decoder-only transformers: a persistent recurrent state that observes hidden representations via cross-attention, updates itself through a GRU, and modulates subsequent processing via gated addition. Inserted between the lower and upper halves of a 6-layer transformer, this module adds only 3.7\% additional parameters while reducing evaluation loss from $2.438 \pm 0.004$ to $1.743 \pm 0.018$, corresponding to a 28.5\% reduction on held-out language modeling data. The improvement is statistically significant across 5 random seeds ($p < 0.01$) and corresponds to reduced overfitting (generalization gap 0.12 vs 0.26). Through controlled ablations, we demonstrate that the improvement stems entirely from the persistent memory topology, not from auxiliary self-prediction objectives. A model with identical topology but no auxiliary loss performs equivalently, while a random auxiliary loss provides no benefit. Representation probing reveals that the persistent state encodes narrative position (52\% vs 33\% chance level)---information that standard attention maintains less efficiently. Our results suggest that bridging transformer layers with a lightweight recurrent memory is a simple, effective approach to improving generalization in small-scale language models.

0.22

LoopSpec: Pipelined Self-Speculative Decoding for Looped Transformers

cs.LG cs.CL ·2026-09-15 ·SangLyul Cho, Langqing Cui, Sehoon Kim, Dongsu Han, Insu Han
highly cited similarity 0.70
Abstract

Looped Transformers achieve strong performance with compact parameter sizes by repeatedly applying a shared stack of Transformer blocks across recurrent depths. However, they incur higher decoding latency than standard Transformer models of comparable parameter size because shared weights are accessed at every recurrent depth. To improve decoding efficiency, self-speculative decoding is particularly well suited to Looped Transformers, as their intermediate recurrent states can directly provide draft predictions without an auxiliary draft model. We therefore propose LoopSpec, a training-free self-speculative decoding framework tailored for Looped Transformers. LoopSpec extracts draft tokens from early recurrent states and operates in a pipelined manner, overlapping draft generation of future tokens with target verification of the current token. To improve draft accuracy without excessive compute overhead, we introduce a selective second proposal from deeper recurrent depth while ensuring lossless decoding under both greedy and sampling regimes. Furthermore, we derive the optimal proposal depths in closed form and show the prediction matches measurement. Across reasoning and coding benchmarks, LoopSpec achieves up to 6.83$\times$ inference speedup across diverse Looped Transformers.

0.44