CS Paper Radar

IGNITE Tokamak World Model Architecture

Peter Steiner, Azarakhsh Jalalvand, Nathaniel Chen, Kouroche Bouchiat, Ricardo Shousha, SangKyeun Kim, Egemen Kolemen

cs.AI physics.plasm-phcs.LG ·submitted 2026-10-01 21:37 UTC · v1

Abstract

We introduce IGNITE, a generative world foundation model for fusion plasma behavior simulation trained in a self-supervised manner from over a decade of unlabeled experimental data at the DIII-D National Fusion Facility. The core of IGNITE is a dynamics model that can simulate DIII-D discharges from a given set of actuator trajectories. These trajectories can be supplied or generated on-the-fly from a textual prompt or from desired experimental outcomes. The model architecture consists of several spatio-temporal tokenizers that embed the different input modalities, including time-series like spatio-temporal measurement data, image sequences, and high-resolution spectrograms, each of which collected at vastly different time scales. The backbone is composed of an auto-regressive dynamics model that has the capacity to predict entire DIII-D discharges given initial latent plasma states and actuator trajectories over a theoretical infinite horizon. IGNITE paves the way towards efficient AI-driven experimental planning and world modeling for nuclear fusion.

Closest papers

Nearest neighbours by meaning across the whole index.

A Generative Foundation Model for Multimodal Tokamak Tasks

cs.AI cs.CE ·2026-11-05 ·Yingshuai Ji, Haodong Feng, Guohong Deng, Gelin Bian, Yue Wang
benchmark similarity 0.68
Abstract

Tokamak experiments record diverse measurements, including waveforms, profiles, fields, and scalars, which are used to reconstruct the plasma, forecast its evolution, recover associated control signals, and estimate disruption risk. Most models are built separately for one task and a fixed set of inputs and outputs, and each relies on a prescribed subset of diagnostics rather than structuring the full multimodal observation set to extract global, cross-signal information about the discharge. These limitations motivate a reusable foundation model that adapts to each task's input-output schema and models heterogeneous target signals jointly, rather than retraining a separate model for every configuration. In this work, we extend the TokaMark benchmark with two groups of tasks for actuator action inversion and disruption prediction, yielding 20 MAST tasks in six groups with explicit schemas and evaluation protocols. Then, we introduce GenToka, a generative tokamak foundation model that jointly generates schema-selected targets through a shared conditional diffusion Transformer, with signal-specific codecs preserving native time series, profiles, fields, and scalars; foundation pretraining and task-specific adaptation transfer cross-signal structure across all six groups. Evaluation on MAST measurements shows that GenToka reduces macro-average normalized root mean squared error relative to TokaMind by 4.7% on Groups 1-4 and by 17.7% on Group 5, and improves macro-average window-level F1 on Group 6 by 8.4% at a common validation-selected threshold. GenToka provides a reusable, generative, and multimodal pathway for experimental tokamaks, linking plasma-state reconstruction, actuator inference, and disruption warning from shared measurements to support more integrated, data-driven fusion plasma prediction and control research.

0.21

Generative modeling for fusion: a large-scale benchmark of stellarator fast-ion simulations

cs.LG physics.plasm-ph ·2026-10-27 ·Misha Padidar, Teresa Huang, Mark Goldstein, Michael Czekanski, Jeffrey Soules
benchmark similarity 0.64
Abstract

Stellarators offer a promising magnetic confinement approach for achieving controlled nuclear fusion. However, stellarator design remains challenging, as evaluating configuration performance requires computationally expensive, high-fidelity simulations. In particular, key performance metrics derived from guiding center simulations are costly to include directly in the design optimization loop, and are almost exclusively used as diagnostics. Machine learning has the potential to advance fusion research by enabling rapid generation and evaluation of new stellarator configurations. Effectively applying ML for fusion demands large-scale datasets that capture both design diversity and high-fidelity simulation outputs. In this work, we introduce the Benchmark of Stellarator Simulations (BoSS), a dataset of stellarator designs paired with guiding center simulation results and trajectories. The BoSS is the first large-scale dataset of guiding center simulations, containing simulation data for 180,000 distinct magnetohydrodynamic equilibria spanning a wide range of magnetic geometries and confinement properties. To exemplify the utility of ML to accelerate stellarator design, we formulate and address two sets of modeling tasks: generative modeling for designing stellarators with good particle confinement, and surrogate modeling for predicting stellarator heat deposition patterns and particle trajectories. The tasks reveal the potential impact ML can have in the stellarator field and important opportunities to improve the applicability of ML models in the sciences. Our baselines generate diverse, performant stellarators and provide useful surrogate predictions, and point to long-horizon trajectory forecasting and out-of-distribution generation as key directions for future work. The BoSS can be accessed through https://boss.flatironinstitute.org/.

0.30

AI Surrogate Modeling for Real-Time Tokamak Equilibrium Prediction: Benchmarking Neural Architectures and Validation on EXL-50U

cs.AI physics.plasm-ph ·2026-08-24 ·Guoyang Shi, Zitong Zhang, Siqi Ding, Jianguo Chen, Yapeng Zhang +3 more
benchmark similarity 0.62
Abstract

Fast and reliable plasma equilibrium prediction is essential for real-time tokamak operation and control, but conventional Grad-Shafranov (GS) solvers are often too costly for real-time deployment. We develop an AI surrogate framework and benchmark five architectures (MLP, CNN, FNO, Transformer, and KAN) on a numerical GS database with 100,000 IID and 10,000 OOD samples. Under a unified protocol, we evaluate accuracy, inference efficiency, model scaling, and robustness. We also establish device-level validation on the EXL-50U tokamak by linking numerical GS solutions, surrogate predictions, and the standard Shape Editor reference to assess simulation-to-device consistency. The surrogates achieve errors of $10^{-3}$-$10^{-2}$ relative to GS solutions, while the GS-to-device discrepancy remains at $10^{-3}$. Transformer gives the best IID accuracy, whereas CNN offers the best balance of accuracy, robustness, and speed, reaching 0.7 ms TensorRT latency. On unseen plasma geometries and parameter regimes, CNN and FNO show the strongest extrapolation stability, with 4%-5% relative $L_2$ error, while models with weaker inductive biases degrade more substantially. Scaling data and model capacity improves interpolation but not necessarily extrapolation, revealing a trade-off between capacity and OOD generalization. Overall, this work provides a systematic, device-consistent benchmark for AI-based GS prediction and practical guidance for selecting reliable surrogates for real-time plasma control and fusion applications.

0.35

Probabilistic and Geometry Aware Neural Surrogate of Scrape Off Layer Plasma Simulations

cs.LG physics.plasm-ph ·2026-09-23 ·Gabriele Gianuzzo, Stefan Dasbach, Fleur Hendriks, Sven Wiesen, Vlado Menkovski
similarity 0.61
Abstract

Fast surrogates for tokamak boundary-plasma simulation are typically deterministic regressors mapping a global operating point to a flattened vector of cell values. Near the divertor detachment transition the steady state is not reliably single-valued. A point estimate must average over qualitatively different plasma states, and it arrives with no statement of confidence. Moreover, the flattened vector representation discards the geometric structure of the SOLPS-ITER mesh. This work addresses both problems. We unroll the curvilinear mesh into three fixed-size image tensors whose layout preserves cell adjacency and inverts exactly, letting a convolutional network act on the geometry without loss of information. A conditional flow matching model, well suited to highly sensitive systems, is then trained on this representation. The result is an efficient, scalable surrogate that captures multiple plausible outcomes even at sensitive operating points. Along a gas-puff scan, the predictive distribution splits into a hot and a cold mode across an early regime transition. A further check on synthetic data with an injected bifurcation of known size confirms the model recovers both branches rather than their average.

0.19

Decomposition-Guided Diffusion Language Models for Inertial Confinement Fusion Prediction

cs.LG ·2026-09-07 ·Xiang Zhang, Varchas Gopalaswamy, Rahman Ejaz, Riccardo Betti, Dongfang Liu
top venue similarity 0.61
Abstract

Inertial confinement fusion (ICF) is a leading pathway toward clean energy, but each shot at the National Ignition Facility costs on the order of one million dollars, making accurate AI surrogates a high-value target. We study exogenous-driven ICF waveform prediction, where a 512-step neutron-rate diagnostic must be inferred directly from a laser pulse and target design parameters, with no historical response observed. The regime stresses standard time-series predictors with temporal sparsity (picosecond peak in a nanosecond window), input-output scale mismatch (under 300 real shots), and peak sensitivity (picosecond timing). We propose ICF-DLM, to our knowledge the first LM-based ICF predictor, combining (i) a physics-typed decomposition into yield $Y_{DT}$, peak timing $t_{\mathrm{peak}}$, and local waveform $w_{\mathrm{local}}$; (ii) bidirectional denoising that defers commitment to peak location; and (iii) a physics-driven PPO reward re-injecting metric structure across numeric tokens. On ICFBench (50K simulations + 232 experimental shots), ICF-DLM cuts peak-timing error from 11.6 to 9.2 steps over a matched autoregressive LLaMA-3-8B and outperforms classical sequence models and LLM-based time-series predictors. Beyond ICF, the recipe shows potential to address science domains with low data and sparse events.

0.47

Equation Recast for Canonical Operator Learning Across Parametric PDEs

cs.LG physics.comp-phphysics.plasm-ph ·2026-09-02 ·Qiyun Cheng, Valentin Duruisseaux, Cesar F. Clauser, Md Hossain Sahadath, Huihua Yang +5 more
similarity 0.59
Abstract

Learning solution operators across broad parameter ranges can require substantial coverage of both input functions and physical parameters, particularly for purely data-driven parametric models. In addition, the resulting models may fail silently outside the training distribution. We introduce equation recast, which reformulates parametric operator learning as the learning of a single canonical operator. Parameter-induced operator variations are derived analytically from the governing equation and absorbed into effective sources, enabling zero-shot prediction across new parameter regimes. Across multi-parameter, nonlinear, and singular PDE settings, equation recast supports extrapolation, integrates sparse heterogeneous datasets in a shared canonical representation, and uses loss of convergence as an internal warning signal for failure of the recast iteration. In high-fidelity tokamak simulations for nuclear fusion, the framework unifies electron-temperature data across four device geometries through canonical-domain mapping within one jointly trained operator. Equation recast provides a route toward reusable neural PDE solvers combining equation-guided transfer, data efficiency, and monitorable inference.

0.14

FusionCLIP: Multimodal Contrastive Pretraining for Fusion Plasma Diagnostics

cs.CV cs.AI ·2026-11-06 ·Qiang Chen, Xiao Wang, Qingquan Yang, Hao Si, Zikang Yan +2 more
similarity 0.58
Abstract

Visible-light videos and multivariate diagnostic signals provide complementary observations of tokamak discharges. However, existing fusion pretraining methods, primarily learn representations by reconstructing or predicting observations, leaving the correspondence between these modalities underexplored. Representation learning is further challenged by the fact that plasma-related regions occupy only part of each video frame and diagnostic variables have substantially different sampling rates. We propose FusionCLIP, a multimodal contrastive pretraining framework. Spatiotemporal Stability Selection retains informative visual tokens, while a Temporal Query Encoder integrates asynchronous diagnostic signals using their observation timestamps. Contrastive learning then aligns the two modality representations. We construct EAST Multimodal Diagnostics (EAST-MMD), comprising 1307 EAST discharges, and evaluate the model on three independently fine-tuned tasks: disruption prediction, edge-localized mode (ELM) classification, and $H_{98}$ regression. FusionCLIP achieves an aggregate score of 89.07\%, exceeding the best general-purpose pretraining configuration and an in-domain contrastive pretraining configuration without Spatiotemporal Stability Selection by 6.27 and 2.12 percentage points, respectively. Ablations and attention visualizations further support the contributions of its key components.

0.29

FireWorldBench: Benchmarking Complex Physical World Intelligence through Coupled-Field Fire Dynamics

cs.AI ·2026-09-19 ·Qiang Chen, Hao Guo, Huatai Zhu, Tairan Huang, Yichao Cao +5 more
benchmark similarity 0.58
Abstract

Understanding the physical world requires more than object recognition, scene description, and short-term visual prediction, as real-world physical systems involve multiple continuous fields, latent causal mechanisms, partial observations, and intervention-sensitive dynamics. We propose FireWorldBench, a benchmark for evaluating complex physical world intelligence in multimodal large language models and agents through coupled-field fire dynamics. Fire provides a canonical stress-test environment, where multiple interacting physical fields jointly shape observable states and temporal dynamics. FireWorldBench is organized along two complementary axes, a physical capability axis and a fire scenario task axis, jointly covering physical-state understanding, temporal dynamics, causal mechanisms, and intervention reasoning. The benchmark comprises 520 fire-world entries, including 494 controlled simulation worlds and 26 real-world-aligned event groups, spanning 47 scene archetypes across 7 environment families. These entries combine structured textual observations, multiple 2D physical-field visualizations, and 3D event-level scene modeling, yielding 9,074 text-image interleaved question-answer pairs across choice-based and open-ended report-generation formats. FireWorldBench evaluates whether models can infer latent physical states, explain underlying mechanisms, forecast coupled-field evolution, and assess intervention consequences from multimodal partial observations, providing a challenging testbed for complex physical world intelligence.

0.30