CS Paper Radar

A Passive AI System for Verifying Physical State on Automated Liquid Handlers

Junqiong Joanne Qiu, Zeckria Kamrany, Ananya Anand, Emma Vidal, Yunjia Johanna Bai, Nathan S Chen, Sean Son, Varada Abhyankar, Taryn Jakub, Eleazar Eskin

cs.RO ·submitted 2026-10-02 01:41 UTC · v1

Abstract

Automated liquid handlers execute digital protocols, but operators must assemble the deck and confirm that the physical setup matches the intended experiment. We present the Labware Setup Checker, a passive vision system that verifies deck preparation on an Opentrons Flex without modifying its hardware or firmware. A consumer webcam mounted outside the robot supplies images to a browser application. The checker segments the deck into slots, corrects slot assignments using the known deck geometry, classifies the labware, and compares the observed setup with a reference protocol library to report missing, misplaced, or unexpected labware. It operates independently of the robot controller and does not interrupt or gate a run. During SwabSeq Respiratory Viral Panel (RVP) pre-PCR deck preparation, the checker tracked a slot from empty to a base and then to the completed plate-and-base assembly, identifying the completed assembly in all 29 frames before robot motion. Across these frames, 95.1% of the 348 labware classifications for slots requiring exact matches agreed with the protocol reference. In 480 frames with partially occluded reservoirs, all 6,720 slot assignments were correct. Across three camera positions and two lighting conditions, slot assignment was 100% correct, and 97.73% of labware classifications matched the protocol reference. Median verification time was 2.10 s on a laptop using only its CPU and 4.24 s from frame capture to receipt of results during AWS deployment in the laboratory. These results show that an external camera and independent software can provide verification of deck setup against protocol requirements within seconds, allowing operators to review the physical setup before starting a run.

Closest papers

Nearest neighbours by meaning across the whole index.

CoralPlan: Observation Skill Selection and Execution for Underwater Robotic Inspection

cs.RO ·2026-09-25 ·Yuer Gao, Yu Zhao, Yi Cai
similarity 0.60
Abstract · 8 pages

Underwater robotic inspection depends on acquiring views that reveal task-relevant structure. For a structurally complex coral colony, recognising the target is only the starting point: the robot must select and execute a viewing motion suited to the inspection task. We present CoralPlan, a vision-language system that selects an observation skill from a current camera image and task text supplied by an episode manifest. A shared motion interface executes orbit, patch, or survey as target-relative trajectories; the remaining plan fields provide operator guidance. Observation completion requires target keeping and primitive-specific coverage, while joint success also requires selection to match the recorded reference. We evaluate this interface in 144 simulated episodes and 36 matched simulation-hardware pairs. In a clear-water pool with external target-reference poses, hardware observation completion reaches 77.8% and joint success reaches 63.9%. The experiments identify both reference-mismatched completions and incomplete observations after a matching skill selection. These results connect observation-skill choice to measurable underwater execution outcomes and identify where task-directed acquisition succeeds or fails.

0.30

WetRobo: A Reproducible Robot Kit for Coding Agents in Biological Laboratories

cs.AI cs.RO ·2026-09-16 ·Yuna Oikawa, Kei Endo, Takanori Uzawa, Yunzhe Zhang, Manan Anjaria +3 more
code/datahot direction similarity 0.58
Abstract · 9 pages, 11 figures, 2 tables. Code and demonstrations: https://github.com/tsudalab/WetRobo

Automating biological research requires general-purpose, reproducible robot systems that allow individual wet-lab researchers to delegate robot tasks without performing teleoperation or neural-network training. Vision-language-action policies have been proposed for general-purpose arms, but can lose performance when their operating environment changes. We therefore built WetRobo, a robot kit that can readily transfer between laboratories. It consists of one robot arm, laboratory equipment (an incubator, a reagent bottle with a cap, and a Petri dish), the existing code that moves the arm, teleoperation demonstrations of each task that we recorded, and a general AGENTS.md skill file. A biological experimentalist provides natural-language tasks without collecting local teleoperation training data or training a neural network. The coding agent observes the local laboratory and writes and executes programs, using external tools as needed for adaptation. We demonstrate use of WetRobo with OpenAI Codex (gpt-5.6-sol) on three successful tasks: lifting a Petri dish lid, removing a bottle cap, and opening the incubator door, all in real-world laboratories. The coding agent achieved the cap task in both laboratories, Lab X and Lab Y, whereas a VLA fine-tuned on Lab X demonstrations succeeded there but failed to transfer to Lab Y. These results point to a practical route for laboratory robotics: instead of training a policy for each laboratory, distribute a kit and let a coding agent adapt it in each laboratory. Code, demonstrations, and the evolved programs are available at https://github.com/tsudalab/WetRobo.

0.67

Curie's Jarvis: Autonomous Robotic Chemistry Experiments from Printed Protocols

cs.RO cs.AI ·2026-11-09 ·Rumi Loghmani, Bozhang Song, Victor Alvarado, Aliyah Redding, Amir Barati Farimani
similarity 0.58
Abstract · 8 pages, 3 figures, 4 tables. Rumi Loghmani and Bozhang Song contributed equally

A person running a bench experiment works from a printed instruction sheet, tells identical containers apart by the labels written on them, and looks at the bench again before each step. Lab automation usually works the other way around: the procedure is written as a script, and containers stand at fixed positions or carry fiducial markers. We present Curie's Jarvis, a system that lets a robot arm carry out a chemistry experiment on a bench set up for people. It reads the steps from a photo of the printed sheet, finds containers on an ordinary bench with no fixed positions or markers, tells identical-looking containers apart by reading their labels in four camera views, locates its target again before every step, and sets how each step is carried out, including its speed, from what is being handled. On a Franka Panda arm, Curie's Jarvis completed 5 of 5 runs of one protocol from a children's chemistry kit and 4 of 5 runs of another, with no human intervention, and in 160 locates on printed and handwritten labels it identified every container correctly. This brings robots a step closer to doing bench chemistry the way people do.

0.30

AI-Driven Collaborative Assembly Line Inspection: System Integration and Deployment Challenges

cs.RO cs.CVcs.HC ·2026-09-27 ·Asya Ünal, Amr Okasha, Ege Çırakman, Perin Ünal
published similarity 0.58
Abstract · 13 pages, 4 figures, 2 tables. Accepted at the 22nd International Conference on Mobile Web and Intelligent Information Systems (MobiWIS 2026…

Manual visual inspection on assembly lines is a persistent manufacturing bottleneck: operator fatigue over extended shifts lowers defect-detection rates. This paper presents the design, integration, and field deployment of an AI-assisted collaborative inspection cell at the Silverline kitchen-appliance factory, developed within the AI-PRISM project. The cell couples a Universal Robots UR 10e cobot carrying a machine-vision defect-detection pipeline with a Comau Racer-5 cobot for functional tests, coordinated through ROS 2 Humble on an Ubuntu 22.04 LTS server. Multi-modal data (Basler camera imagery, TIA microphone acoustics, and SPS electrical-safety measurements) are logged locally and visualised in real time with Grafana. We report the practical deployment challenges (close-proximity safety, AI robustness under glare and reflections, ROS 2 namespace collisions across two cobots, and operating-system and dependency issues) together with the engineering solutions adopted, and structure the integration through a four-level Human-Robot Interaction analysis. The deployed cell cuts per-unit quality-check time from 82 s to 61 s (about 25%), raises final-control resource efficiency from 0.75 to 0.88, reduces operator visual-inspection viewing time by 82%, and significantly lowers operator mental demand (p = 0.005, NASA-TLX).

0.30

INSPECT: Learning Robot View Selection from Assistant Use

cs.RO cs.CV ·2026-09-17 ·Di Wen, Kailun Yang, Wenhao Guo, Yitian Shi, Junwei Zheng +5 more
code/data similarity 0.58
Abstract · 9 pages, 3 figures, 5 tables. Code: https://github.com/Kratos-Wen/INSPECT

Robots inspecting an assembly must determine which parts are present and whether they are correctly installed. During egocentric assembly assistance, head motion and workpiece handling reveal evidence for these checks, while spoken state confirmations link observations to procedural outcomes. We introduce INSPECT, which learns robot view preferences from records of a smart-glasses assistant that answers part queries and provides next-step guidance. Presence-Invariant TwinSwap (PI-TwinSwap) calibrates object evidence through paired identity interventions. Claim-indexed supervision separates evidence requirements from camera-reproducible observation changes. Object-centered calibration adapts relative view preferences to robot poses, while clause-level screening checks predicted evidence. The robot selects views using only its current observation and known poses, without candidate images. Evaluation uses annotated assistant-video replay to simulate state feedback, without target-domain view labels for policy training. On images of physical gearbox assemblies, INSPECT achieves the highest view utility among the compared non-oracle policies and raises human-rated full verifiability from 34.8% to 41.7% compared with keeping the current view. On commercial angle-grinder recordings in IMPACT, the transferred relative-view selector increases the correct decision rate from 50.6% to 54.3% with a frozen perception head. The source code is available at https://github.com/Kratos-Wen/INSPECT.

0.65

ROS2SmolVLA: Enabling Small Vision-Language-Action Models for Integration into Industrial-Grade Lightweight Robots

cs.RO ·2026-08-24 ·Nils Mandischer, Noah Böckmann, Ludwig Holl, Lars Mikelsons
publishedcode/data similarity 0.56
Abstract · Accepted at 8th International Conference on Industry of the Future and Smart Manufacturing, Padua & Venice, 2026

Industrial demand changes the paradigms of production. Due to smaller batch sizes and more variations in products, companies face a growing challenge to adopt more adaptive production systems. In particular, robot-based automation is usually static and fails to respond to constantly changing processes. Vision-Language-Action (VLA) Models are a promising opportunity to mitigate this challenge by generating robot actions based on the observed system state. However, current research either focuses on large models that cannot be computed on premise, creating compliance and security challenges, or use lab-grade robot hardware that obscures exploitation in real industrial settings. In this work, we adapt Hugging Face's SmolVLA for Universal Robots lightweight robots. Further, we release the open-source repository ROS2SmolVLA that implements an interface for ROS 2 to SmolVLA, and makes it applicable for industrial-grade hardware. By this, we allow a lenient adoption into lab and industrial environments. We validate the functionality of SmolVLA for a Universal Robots UR10e using a pick-and-place task and give implementation guidelines. Our findings support that SmolVLA is a well-suited option for small-sized tasks that need to be computed on premise.

0.56

Robo-MLT: Dual-System Robotic Manipulation for Long-Horizon Medical Laboratory Tasks

cs.RO ·2026-11-09 ·Zequan Zeng, Kai Wang, Delvin Ce Zhang, Huaping Liu, Zhipeng Yuan +2 more
similarity 0.55
Abstract · 12 pages,7 figures,5 tables,1 algorithm

Reliable medical laboratory automation requires robots to complete entire workflows in protocol order while handling changes during execution. A robot may execute each motion correctly yet fail the workflow by confusing visually similar stages or stalling after human intervention. We present Robo-MLT, a dual-system framework that couples explicit workflow monitoring with learned action generation. A vision--language planner composes an ordered atomic-skill sequence from the protocol and the initial workspace observation. A multiframe execution monitor detects when the active skill has completed or become infeasible, then advances the workflow or triggers replanning. A skill-conditioned vision--language--action policy generates the manipulation trajectories, and an asynchronous runtime coordinates it with the monitor. We evaluate Robo-MLT against four policy baselines and a VLM-based monitor baseline on blood gas analysis and blood sample tube sorting, with 50 nominal configurations per method and 20 sample-removal configurations. Robo-MLT achieves task success rates of 82\% and 70\%, exceeding $π_{0.5}$ by 30 and 22 percentage points, respectively. After an operator removes the sample being handled, the system revises the remaining plan and continues processing the other samples. These results indicate that, under the evaluated conditions, explicit workflow monitoring makes long-horizon laboratory manipulation more reliable and recoverable.

0.13

PyRUA-DataFarm: LLM Agent as a Cost-Efficient Teleoperator for Real-Ready Robot Data

cs.RO cs.AI ·2026-11-03 ·Kewei Zhang, Juncheng Ma, Guodong Lv, Duomin Wang, Feixiang Ruan +9 more
code/datacommunity pick similarity 0.55
Abstract · 22 pages, 9 figures, 9 tables. Project page: https://dagroup-pku.github.io/PyRUA-Lean/DataFarm Code: https://github.com/DAGroup-PKU/PyRUA-Le…

Teleoperation remains the default way to collect robot demonstrations, but every episode costs robot and operator time, and every new task starts from scratch. We ask whether a coding agent can take over the teleoperator's job. In our DataFarm, the agent receives a data request and one calibration episode of the robot in the target scene and rebuilds the task in simulation: it writes the scene, an expert controller, and a success judge. The simulator supplies exact actions, and a video model conditioned on real images renders each rollout as photographic video, generating all camera views together consistently. The output is real-ready data: synchronized camera views labelled with the robot's actions, on which a policy can be trained directly and deployed on the real robot. Independent judges certify the expert and every rendered episode before admission. On five real-robot tasks, policies trained only on farm data match policies trained on as many teleoperated episodes (93 vs. 84 successes in 100 trials), and under an unseen tablecloth and coloured light they keep 87 successes where the teleoperation-trained policies fall to 46. Adapting a task is fully automatic and costs \$21 of API usage on average, paid once per task, plus \$5 for a render contract; every further episode costs \$0.80 on average for simulation, rendering, and review, with no robot or operator. One hour of three-view data for a task costs \$107 on average, these costs included, slightly below a quote of \$117 for teleoperation in China and below \$290 in labour alone in North America.

0.31