CS Paper Radar

PLCWorld: Benchmarking LLM-Generated PLC Programs in Closed-Loop Plant Simulation

Yunji Kim, Yunseok Lee, Hyunwoo Seo, Jaerim Choi, Woojin Lee

cs.AI ·submitted 2026-10-02 08:14 UTC · v1
benchmarkcode/data

Abstract

Programmable logic controllers (PLCs) coordinate industrial equipment by reading sensor inputs and issuing control commands. Evaluating whether large language model (LLM)-generated PLC programs satisfy task requirements and safety constraints requires observing how their commands affect device and workpiece states. We introduce PLCWorld, a common closed-loop execution environment and benchmark that couples Structured Text (ST) execution with simulated plant responses and sensor feedback. Grounded in control relations identified in industrial PLC programs and engineering documentation, PLCWorld contains 100 synthetic tasks and 473 registered task-condition pairs across Motion Control and Material Handling, with difficulty defined by control-dependency scope. A common protocol reports Task Success and Safety Violation separately. Validation combines practitioner review, reference and alternative programs, targeted counterexamples, specification-evaluator alignment checks, and comparisons with independent ST runtimes. Reference and alternative programs satisfy their applicable cases, while all 542 targeted counterexamples activate their designated evaluator rules under at least one registered condition. Execution Gap relates submission-profile acceptance to subsequent task failure or observed Safety Violation. Across the constructed task groups, direct GPT-5.5 achieves 82.70% Task Success on Easy cases but 25.10% on Hard cases. Evaluations of six LLMs and four adapted generation-and-verification workflows further expose differences between completion, safety, and generation cost. Our code, simulation environment, benchmark tasks, and baseline implementations are publicly available at https://yunji0516.github.io/PLCWorld/.

Comment
36 pages, 9 figures. Project website: https://yunji0516.github.io/PLCWorld/

Closest papers

Nearest neighbours by meaning across the whole index.

PLCBench: Can Autonomous LLM Agents Turn PLC Access into Sustained Physical Impact?

cs.CR cs.AI ·2026-08-27 ·Yitian Zhou, Jingyu Zheng, Qiliang Jiang, Linkang Du, Haoming Liu +4 more
similarity 0.73
Abstract · 36 pages, 13 figures

Industrial control systems (ICSs) rely on programmable logic controllers (PLCs) to connect networked computation with physical control. Tool-using large language model (LLM) agents represent an emerging attack threat: can an autonomous agent convert a network-reachable PLC into sustained adverse physical impact? However, existing evaluations focus on digital tasks or individual stages of PLC testing. In ICSs, evaluations that stop at software exploitation, an accepted write, or tool access may therefore mischaracterize physical risk. We present PLCBENCH, to our knowledge, the first real-PLC hardware-in-the-loop (HIL) framework for characterizing this cyber-to-physical capability and its boundaries. It combines vendor-native interaction, commercial PLC execution, closed-loop reduced-order process simulation, and independent outcome verification. A deterministic evaluator applies fixed rules to runner, communication, PLC-object, and process records to assign six hidden diagnostic flags, distinguishing usable PLC interaction, process-linked manipulation, and sustained physical impact. We instantiate PLCBENCH on four commercial PLCs crossed with four closed-loop workloads. Across five LLM families and 240 real-PLC episodes, 75 episodes (31.3%) sustain their respective physical objectives. Stagewise results show that 98 episodes stop before a valid native read, whereas 62 reach a process-linked write but do not sustain the final objective. Notably, richer process observation is associated with an increase in conditional objective attainment after a process-linked write from 44.2% to 64.0%. These measurements localize failure in configured PLC-process deployments and identify intervention points for future defense evaluation. To support reproducibility, we release the safely disclosable PLCBENCH code and a software-only reproduction pipeline through the accompanying artifact.

0.19

Compilation Is Not Correctness: Scan-by-Scan Evaluation of LLM-Generated PLC Programs

cs.SE ·2026-10-19 ·Jinyun Chen, Juntao Hu, Haochen Li, Wentao Song, Ningbo Gu +3 more
benchmark similarity 0.70
Abstract · 21 pages

Programmable logic controllers (PLCs) automate industrial processes through repeated scans, each reading inputs, executing control logic, and updating outputs. Engineers write this logic in Structured Text (ST), a high-level textual language defined in IEC 61131-3. Large language models (LLMs) can now generate ST from natural-language requirements, yet compilation success and checks on selected properties or sampled scans can leave behavioral errors undetected. We introduce CycleBench, a benchmark of 301 ST tasks with behavioral requirements, public interfaces, reference programs, and executable scenarios. Its runtime executes each generated program and its reference under aligned inputs, initialization, and logical time, comparing their outputs after every scan. Across eight LLMs and baseline generation methods, execution pass rate trails compilation pass rate by 11.92 percentage points; observed failures include output-update, arithmetic, and timing errors. On fixed traces of programs directly generated by five LLMs, checking outputs only at every fifth scan misses 21.66% of the 157 failures detected by per-scan comparison; across sampling phases, the missed-failure rate ranges from 12.10% to 28.03%. These misses stem from transient output discrepancies, whose detection depends on the sampling phase. Building on this evaluation, we propose CycleGen, which generates multiple candidate ST programs, repairs their compilation errors with bounded compiler feedback, and selects one using runtime self-tests generated in a separate model context. CycleGen improves the execution pass rate over direct generation by 8.68 percentage points. Component ablations distinguish repair and self-test selection; candidate-count analysis shows diminishing returns, with no execution-pass-rate improvement beyond five candidates in our experiments despite 38.8% higher token consumption at eight.

0.30

SemaPLC: A Project-Grounded, Verification-Gated Agent Harness for PLC Code Generation

cs.SE ·2026-08-19 ·Yanlun Tu, Huacan Wang, Jin Xie, Ziyue Zhou, Jie Zhou +9 more
similarity 0.68
Abstract

In industrial practice, AI-generated programmable logic controller (PLC) code must integrate with existing projects and implement the required behavior across scan cycles. Compilation alone does not establish runtime behavior, and subsequent edits can invalidate earlier verification results. We present SemaPLC, a project-grounded, verification-gated agent harness for PLC code generation. The harness combines project context and reusable PLC skills with specification review, compilation, and live-runtime validation. Its completion gate requires recorded checks to meet acceptance criteria for the current implementation. Edits invalidate previous verdicts, and failed checks guide bounded repair. We evaluate SemaPLC on 117 independent-POU tasks and 65 project-context tasks across seven language-model backbones. SemaPLC outperforms the evaluated baselines on both metrics for every backbone. Its mean verified-pass rate and dynamic score reach 72.6% and 52.2, exceeding the strongest baseline means by 8.7% points and 20.8 points, respectively. Verification-layer and failure analyses reveal how build recovery and output observability affect end-to-end results and identify behavioral errors that remain after compilation. We apply the harness in KUKA's iiQworks product environment for PLC development and discuss engineering lessons for its industrial integration and deployment. The industrial use indicates the agent assistance substantially improves PLC development efficiency by 45%.

0.43

From Natural Language Intent to Executable Control: Hierarchical Feedback-Guided LLM Planning for Multi-component Cyber-Physical Systems

cs.AI cs.SE ·2026-10-15 ·Jinglin Dai, Jiawan Wang, Ruiqi Hong, Lei Bu
similarity 0.67
Abstract · 20 pages, 6 figures

Large language models (LLMs) provide a convenient interface for translating natural language commands into task plans for cyber-physical systems (CPSs). However, two gaps hinder their use for real execution: generated plans may misinterpret or omit the user's intent, and even a logically plausible plan may be infeasible under component dynamics, interactions, or safety constraints. Existing LLM-based planning approaches often lack informative feedback on why a generated plan fails, providing little guidance for revising the plan accordingly. To address these challenges, we present a hierarchical feedback framework that uses different types of feedback information to guide LLMs in generating executable plans for CPSs. We prompt LLMs to generate both a structured task plan and corresponding signal temporal logic (STL) constraints, and design a sound algorithm that identifies definite contradictions between them and provides feedback for revising inconsistencies. At the execution level, when control synthesis fails, we extract different types of diagnostic information, such as violated constraints and conflicting component assignments, and feed them back to guide task replanning. Experiments on seven heterogeneous multi-component CPS scenarios have shown that our framework can generate executable plans and feasible control executions that satisfy the original natural language missions with a success rate of 87.9% with GPT-5.

0.25

PanelShield: Verifiable Closed-Loop Safe Planning for Robotic Industrial Panel Operation

cs.RO cs.AI ·2026-08-28 ·Guipeng Xin, Jiahe Xu, Chenhui Wan, Jie Liu, Youmin Hu +1 more
benchmark similarity 0.65
Abstract

Industrial panel operation is knowledge-intensive and safety-critical. Beyond control recognition and action generation, execution must satisfy constraints in operation manuals and safety regulations. While foundation-model-based planners show strong semantic capability, they typically lack computable, localizable, and reproducible mechanisms for violation detection and repair. To address this, we propose PanelShield, a verifiable closed-loop safety planning framework for manual-guided industrial panel operation. The framework generates parameterized action primitive sequences from task-relevant manual evidence and applies dual formal verification with LTL and a Safety FSM to enforce cross-step temporal correctness and local transition legality. When violations occur, it outputs a structured counterexample with the earliest violating step and cause, enabling targeted repair and re-verification. We build a multi-level long-horizon planning benchmark covering three representative industrial device panels, and evaluate the framework in simulation and real-world robotic experiments. Results show that PanelShield improves complex safety-constrained task performance over foundation-model-only planning baselines while reducing the violation rate to 2.7%, with 4.1 s total latency. Real-world experiments demonstrate end-toend feasibility. Overall, PanelShield offers a verifiable approach to robotic panel operation that balances flexibility, safety, and auditability.

0.20

Trace2ST: Recovering PLC Structured Text from I/O Traces with LLM Generation and Verification

cs.SE cs.AIcs.CYcs.PL+1 ·2026-11-17 ·Hsi Chang, Irfan Khan
code/data similarity 0.64
Abstract · 6 pages, 3 figures, 4 tables. Submitted to the 2027 IEEE Texas Power and Energy Conference (TPEC 2027)

Programmable logic controllers (PLCs), the industrial computers that operate power and process plants, often run programs whose source code is no longer available; however, every input and output of the controller is logged continuously. This paper therefore asks whether a large language model (LLM) can recover an executable program in Structured Text (ST), the standard PLC language of IEC 61131-3, from such input/output records (traces) alone and, equally important, how the recovered program can be verified. To answer this question, we build a generate-replay-feedback pipeline. First, the LLM writes a candidate program from a compressed summary of the trace, without ever seeing the original program. The candidate is then executed one control cycle (scan) at a time and compared with the recording, and whenever a mismatch occurs the corresponding part of the trace is returned to the LLM, for at most three revisions. Because every result depends on the software that executes the candidates, we first validate it against two independent open-source PLC runtimes and find no unexplained difference. On this basis, we evaluate 47 third-party programs from two public benchmarks. The recovered programs reproduce the recorded trace exactly in 43 cases and agree with the original on 94% of scans for unseen inputs. The remaining errors, however, lie mostly in program branches that the trace never exercised; once a trace that targets these branches is added, agreement on unseen adversarial inputs rises from 0.80 to 0.98. By contrast, a classical automata-learning baseline without an LLM fits the recording but falls to 0.40 on unseen inputs, which indicates that recovering program structure is the hard part. Finally, on real data from a public water-treatment testbed, the recovered control laws match unseen measurements closely ($R^2 > 0.99$) and expose the only actuator attack in the dataset.

0.23

Words to World: Benchmarking LLMs in Interactive Physical Environments

cs.AI ·2026-10-10 ·Xinnan Dai, Kaiqi Yang, Yaxin Li, Cheng Luo, Wanli Li +7 more
benchmark similarity 0.62
Abstract

Words are increasingly becoming an interface for action: large language models (LLMs) can now invoke tools, operate devices, and make decisions that affect the physical world. However, current benchmarks largely evaluate LLMs through static text responses, offline tool calls, or simulated tasks, leaving open the question of how well they can act in real physical environments. We present a benchmark for measuring LLMs in closed-loop physical interaction, where models control a harness system connected to real-world components including robotic arms, cameras, and sensors. In each task, the model must issue instructions, receive physical feedback from the environment, interpret the resulting state, and adapt its next action accordingly. This setting evaluates capabilities beyond language understanding, including grounded perception, action planning, tool selection, spatial reasoning, feedback-driven correction, and robustness to execution uncertainty. Through experiments with representative LLMs, we characterize their ability to translate linguistic reasoning into physical actions and identify common failure modes such as hallucinated state changes, poor recovery from unexpected outcomes, and unstable long-horizon plans. Our benchmark aims to provide a systematic foundation for evaluating LLMs as interactive agents that connect words, tools, and the physical world.

0.17

SafeOrchestrate: Runtime Checked Intent-Driven Orchestration for Cyber-Physical Systems

cs.AI ·2026-11-06 ·Muhammad Ashfaq, Ahmed R. Sadik, Ewan Warburton, Pyry Kotilainen, Niko Mäkitalo +1 more
similarity 0.61
Abstract

Modern cyber physical systems (CPS) integrate heterogeneous sensors, actuators, controllers, and services, composed at runtime rather than at design time. Orchestrating such systems through natural language (NL) is attractive, but unconstrained large language model (LLM) tool use is risky because actions must respect device capabilities, runtime state, and safety constraints. We present Safe Orchestrate, a reference architecture for runtime checked, intent driven CPS orchestration. Given an NL intent, it derives atomic goals, generates a runtime checkable specification for each, grounds the specifications to device affordances, and verifies every candidate action against runtime state and safety constraints before execution. In a Web of Things (WoT) instantiation, the architecture produces Linear Temporal Logic (LTL) style specifications from the NL intent, grounds them to Thing Description (TD) affordances exposed through the Model Context Protocol (MCP), and checks candidate actions against satisfiability modulo theories (SMT) backed guardrails. We evaluate this instantiation on simulated smart home, greenhouse, and industrial automation tasks against a direct LLM to MCP baseline. Safe Orchestrate maintains 100% required action accuracy on every task and 100% MCP Execution Similarity (MCP ES) on all but one, where MCP ES is 92%. By contrast, the baseline degrades on multi device, event triggered, and ordered tasks, with MCP ES falling to 13%. These results suggest that combining LLM based specification generation with role aware grounding and runtime constraint checking improves reliability for open CPS orchestration without enriched TD annotations or planning domain expertise.

0.06