CS Paper Radar

Compiling Together: High-Throughput Distributed Quantum Computing via Multi-Compilation

Yipei Liu, Sen Zhang, Zebo Yang, Lei Yang

cs.AR quant-pheess.SY ·submitted 2026-10-02 13:04 UTC · v1

Abstract

Quantum computing is a promising paradigm for problems that are challenging for classical machines, but realizing that promise requires far more qubits than a single processor can offer. Distributed quantum computing (DQC) scales out by connecting multiple quantum processing units (QPUs), at the cost of making entanglement the scarce resource: every remote gate consumes a Bell pair, and inter-QPU links generate Bell pairs at finite rates orders of magnitude slower than local gates. Since quantum programs are executed repeatedly, this rate bounds how fast shots complete and thus how fast results are obtained. Existing DQC compilers emit a single implementation per circuit, so throughput is capped by its busiest link while other links stay idle. We observe that alternative compilations of the same circuit are logically equivalent yet stress different links; executing them concurrently and pooling their samples converts idle Bell pairs into additional shots. We formulate the joint selection of compilations and allocation of shots under per-link Bell-pair capacities as Candidate-Constrained Max-Shot Allocation (CMA), prove it NP-hard, and solve it with a dynamic program and its approximate variant AppDP, a compact MILP, and a greedy heuristic Effi. In simulation on six-QPU networks, multi-compilation raises throughput by 2-4.5* over the single compilation and correspondingly improves output fidelity under equal Bell-pair budgets. On hardware, it increases measured fidelity by up to 93% and reaches the single-compilation fidelity in up to 10* less time. Scaling to 36 QPUs and 144-qubit circuits, MILP improves throughput over the single compilation by 76.8% on average across 48 configurations while Effi allocates in milliseconds.

Closest papers

Nearest neighbours by meaning across the whole index.

Towards Reproducible Evaluation of Distributed Quantum Circuit Partitioning Algorithms

cs.DC quant-ph ·2026-08-27 ·Javier Vela-Tambo, Davud Azizov, Tian Guo
code/data similarity 0.75
Abstract · Accepted at IEEE QCE 2026 Workshop: Distributed Quantum Computing Systems and Infrastructure

Distributed Quantum Computing (DQC) addresses the physical scaling limitations of monolithic quantum processors by networking modular Quantum Processing Units (QPUs). Efficient execution of quantum algorithms on DQC architectures requires compiling them across QPUs while minimizing inter-QPU communication bottlenecks, primarily through circuit partitioning. However, current evaluations of state-of-the-art partitioning heuristics focus primarily on the total entanglement cost of the partitions, failing to capture the broader structural and temporal overheads introduced by distributed network constraints. This paper addresses this evaluation gap by applying established monolithic benchmarking metrics to partitioned distributed circuits to quantify the performance impact of network constraints. Using an open-source, automated evaluation pipeline, we systematically assess diverse partitioning algorithms across standardized workloads and quantum network topologies. Our empirical results reveal that partitioning algorithms with comparable entanglement costs can still introduce drastically different physical execution penalties. By exposing these hidden trade-offs, such as severe increases in circuit depth and substantial reductions in gate density, this study demonstrates that comprehensive circuit-level metrics are essential for guiding the future design of DQC compilers.

0.21

Resource-Aware Scheduling for Distributed Quantum Computing

cs.NI ·2026-10-21 ·Connor Howe, Raghav Mundada, Jake O'Shaughnessy, Ibrahim Abdullahi, Ali Anwar
similarity 0.73
Abstract

Distributed quantum computing (DQC) is a promising near-term approach for executing circuits that exceed the capacity of a single quantum processing unit (QPU). Prior work has made significant progress on circuit partitioning and reconstruction, but practical DQC requires more than cutting a circuit into smaller pieces. A runtime system must determine whether to execute the circuit intact, cut it for sequential execution on one QPU, or distribute it across multiple QPUs, while accounting for queueing, communication, reconstruction, and hardware constraints. We present a resource-aware scheduler for DQC that compares these execution alternatives at runtime using explicit models of QPU execution, communication, and host-side reconstruction, together with hardware-informed timing derived from simulated IBM QPUs. By treating communication and reconstruction as first-class scheduling costs, the scheduler selects execution plans using a more realistic view of end-to-end overhead than cutting-only approaches. Across our experiments, reconstruction accounts for over 83% of cutting overhead, distributed execution reduces P90 latency by up to 39% relative to uncut single-QPU execution, and scheduling overhead itself remains negligible, never exceeding 0.038% of end-to-end job latency. Together, these results show that DQC must be treated as a runtime scheduling problem over both quantum and classical resources, not just circuit partitioning.

0.15

Distributing Quantum Circuits Using Pre-Distributed Entanglement Pairs over Quantum Networks

cs.ET quant-ph ·2026-10-19 ·Yukun Yang, Ranjani G. Sundaram, Himanshu Gupta
publishedbenchmark similarity 0.72
Abstract · 9 pages, 4 figures. Full author version revised after acceptance; includes the cost-aware entanglement consumption section omitted from the …

Distributing quantum circuits across a network of quantum devices is a recent approach to improve the scalability of quantum computation. Entangled pairs of qubits distributed across network nodes are used as a communication resource for executing inter-node (remote) gates. However, establishing these entanglement pairs incurs significant latency, and doing so during the circuit's execution may lead to the decoherence of logical qubits. Instead, it may be beneficial to distribute certain entanglement pairs before the circuit is executed. Thus, we consider the problem of distributing a quantum circuit across a quantum network containing some pre-distributed entanglement pairs and seek to minimize the execution time of the circuit. We address this problem in three steps. First, given the quantum network and (optionally) a probability distribution over training circuits, we determine a set of pre-distributed entanglement pairs under a specified budget. Second, we compute a qubit-to-memory allocation that minimizes the expected execution time given these pre-distributed resources. Finally, we identify any additional entanglement pairs required during execution, generate them concurrently, and execute the circuit gates. We evaluate our methods on a broad range of benchmark circuits.

0.47

Online Scheduling and Distribution of Quantum Circuits over Quantum Networks

cs.ET quant-ph ·2026-10-19 ·Yukun Yang, Himanshu Gupta
published similarity 0.70
Abstract · 8 pages, 5 figures. Full author version revised after acceptance; the QCNC 2026 version was shortened to meet the conference page limit

Emerging quantum networks enable distributed quantum computing (DQC) by interconnecting modest, noisy quantum processors. However, practical deployments face tight memory budgets, probabilistic entanglement generation, and decoherence, all while serving multiple users. In realistic settings -- cloud execution, iterative/interactive workloads and concurrent jobs -- circuits do not arrive in a single batch but as a stream. This creates a fundamentally online problem: the system must react to stochastic arrivals, balance latency and throughput, and remain stable under varying loads without foresight of future jobs. We study Online Scheduling and Distribution of Quantum Circuits (OS-DQC) and formalize the online scheduling problem for quantum networks: circuits arrive over time and must be executed without knowledge of future arrivals. At each event time (arrival or completion), the system decides which waiting circuits to launch and how to place their qubits, while accounting for congestion from in-flight circuits and constraints due to finite memories and decoherence. The objective is to minimize the mean completion time and makespan under these physical and resource constraints.

0.33

Structural Conditions for Distributed Quantum Advantage

cs.DC quant-ph ·2026-10-03 ·Sabina Drăgoi, María Gragera Garcés, Lirandë Pira
theoryhot direction similarity 0.70
Abstract · 14 pages of main text + 25 pages of appendices; 18 figures, 7 tables

Circuit cutting runs a quantum computation on processors smaller than the circuit, at the price of classical knitting whose cost grows exponentially with the number of cut gates. Keeping this cost affordable is necessary but not sufficient for an advantage, since knitting classically easy subcircuits is itself classically easy. We formulate three requirements for distributed quantum advantage under a stated budget: affordable knitting, classical difficulty that survives the cut, and, for variational circuits, resolvable gradients. We prove that under stated assumptions knitting stays affordable when subcircuits grow behind a bounded interface and becomes exponentially expensive when fixed-width subcircuits multiply. We turn the requirements into screening criteria and apply them to eighteen circuit families. We identify finite local-depth circuits with bounded interfaces as a setting in which the requirements can coexist, with hardness established only in the worst case. As a classically verifiable proof of principle, we knit one gate joining two field-perturbed toric-code patches on an IBM Nighthawk processor for up to 142 spins, and confirm that the reconstruction can at least resolve the contact correlation beyond independent execution for up to 98 qubits.

0.30

Benchmarking the computational power of quantum computers

cs.ET quant-phcs.PF ·2026-09-10 ·Timothy Proctor, Oliver Hart, Oliver Widzowski Maupin, Matthew Girling, Daniel Hothem +25 more
benchmark similarity 0.69
Abstract

Quantum computing hardware is advancing rapidly toward utility-scale machines that will enable scientific breakthroughs. Many teams are pursuing distinct and difficult-to-compare routes to this goal, using different qubit technologies and logical architectures. Tracking progress toward quantum utility therefore requires rigorous benchmarks that measure computational capability relative to utility-scale challenge problems and enable fair comparison across disparate platforms. Here we demonstrate direct, cross-platform measurement of quantum computational capability using a new benchmark that quantifies the size of the largest computationally relevant quantum circuits that a machine can execute successfully and the speed at which it can execute them. We apply this quantum universal operation performance system (QUOPS) experimentally to leading processors from Quantinuum, Google, and IBM, computing directly on physical qubits. Translating state-of-the-art resource requirements for recognized challenge problems that represent useful quantum computation into effective QUOPS circuit sizes shows that computational capability must grow by 5 orders of magnitude, motivating fault-tolerant approaches. We use the same benchmark to assess the performance of a simple fault-tolerant logical-qubit processor implemented on up to eight [[7,1,3]]-encoded logical qubits using Quantinuum Helios-1, and project the growth of capability across successive generations of fault-tolerant quantum computers to show how QUOPS can track progress toward quantum scientific utility.

0.43

SeQUeNCe.DQC: Full-stack Simulation of Distributed Quantum Computing

cs.NI cs.DCquant-ph ·2026-10-29 ·Sanjay Suresh, Caitao Zhan, Joaquin Chung, Rajkumar Kettimuthu
benchmark similarity 0.68
Abstract · 6 pages, 6 pages

Distributed quantum computing (DQC) connects multiple quantum processing units to overcome the scale limits of monolithic hardware. We introduce SeQUeNCe$.$DQC a new top-level module within the SeQUeNCe package that compiles monolithic circuits into topology-aware execution plans and coordinates their execution using SeQUeNCe's existing quantum-network modules and protocols. We validate SeQUeNCe$.$DQC by reproducing a two-node trapped-ion Grover experiment in simulation and comparing success probabilities with the reported 71% benchmark. We then evaluate how compiler strategy, topology, and memory capacity jointly govern distributed circuit execution time and success rate. In these experiments, our hybrid compilers successfully identified mixed TeleGate/TeleData execution plans that outperformed pure gate-teleportation strategies. By capturing the physical overhead of distributed quantum primitives, SeQUeNCe$.$DQC provides a rigorous platform for co-designing DQC software and hardware architectures.

0.07

Entanglement-Capability-Aware Finite-Bond Circuit Cutting for Distributed Quantum Computing

cs.DC quant-phmath.OC ·2026-10-10 ·Weidong Liu, Qingqing Jiang, Yufu Liu, Ruiqing He, Jiandong Shang +2 more
similarity 0.68
Abstract

Distributed quantum computing distributes workloads that exceed a single processor's capacity across resource-constrained components. Circuit cutting enables this decomposition, but its effectiveness depends on partition choice. We present SACE, a Simulation-Aware Circuit Partitioning framework with Entanglement-Capability-Aware Screening. EP-Cost screens partitions using a parameter-dependent entanglement-capability proxy and native implementation cost. Under reconstruction constraints, finite-bond refinement selects the candidate that minimizes the worst-subcircuit discrepancy between normalized MPS simulations at bond dimensions $χ$ and $2χ$. Across 14 exhaustively enumerated small-scale candidate spaces, EP-Cost-guided genetic algorithm selections attain co-optimal native quasiprobability decomposition (QPD) overhead, with a median within-circuit Spearman correlation of 0.9965 between EP-Cost and QPD overhead. At matched cut counts, EP-Cost reduces QPD overhead by $25.20\times$ and $16.89\times$ for 8- and 9-qubit QFT circuits, respectively, and improves sampled reconstruction. On 12-qubit approximate QFT, deterministic reconstruction reduces Pauli-observable mean absolute error in all six low-bond conditions and total-variation distance in five. With five cuts and 7,776 QPD terms, SACE is best on all four reconstruction metrics in four of six conditions. At 24 qubits, SACE improves exact-local QFT accuracy in all 30 instance-bond-dimension conditions against each EP-Cost-only, Kernighan-Lin, and spectral baseline. The 50-qubit QFT comparisons remain favorable as reference convergence improves. Weighted QAOA circuits provide complementary, more bond-sensitive evidence. Refinement benefits persist across three search methods; larger candidate panels improve the optimized proxy without guaranteeing lower exact-local error.

0.14