CS Paper Radar

Application of sequence learning for predicting radiation damage of the CMS electromagnetic calorimeter

Mario Ivan Gallegos Torres, Leonid Serkin, Guy Paic

cs.LG physics.ins-dethep-ex ·submitted 2026-10-02 21:11 UTC · v1
published

Abstract

In this paper we use machine learning methods to predict radiation damage in the lead tungstate crystals of the CMS electromagnetic calorimeter at the Large Hadron Collider. We analyze LHC Open Data collected from 2016 to 2018 and study the time evolution of the crystal optical transparency. We apply deep neural network models to predict its behavior over different future time intervals, and find that encoder-decoder sequence-to-sequence architectures can effectively describe crystal aging.

Comment
5 pages
Journal ref
EPJ Web of Conferences 386, 03003 (2026)
DOI
10.1051/epjconf/202638603003

Closest papers

Nearest neighbours by meaning across the whole index.

Product units in gated recurrent networks enhance prediction of nuclear masses and charge radii

cs.LG nucl-th ·2026-11-13 ·Ziyuan Li, Paulo S. A. Freitas, John W. Clark, Babette Dellen
similarity 0.58
Abstract

The prediction of nuclear properties using machine learning can complement theoretical models and advance the exploration of poorly known domains of the nuclear chart. We propose a machine learning technique for predicting nuclear masses and charge radii based on gated recurrent units (GRU) that integrates learnable product-unit mappings into the candidate state to model multiplicative dependencies among neighboring nuclei. Computations are performed in the complex domain to jointly capture amplitude and phase dynamics. Across three data partitions and three training seeds per partition, AM-PU-GRU achieves a mean mass interpolation RMSE of 0.2698 MeV and a temporal RMSE of 0.1905 MeV. Configuration comparisons support the integration of learned products into gated recurrence. Without mass inputs, MI-PU-GRU predicts charge radii with an RMSE of 0.019947 fm, 14.40% below the fixed WS* prior. Matched radius controls further show how candidate fusion shapes the benefit of learned products. Paired errors, nuclide-resolved maps, and inference measurements characterize predictive gains and computational cost. This article is an extended version of our ICCS 2026 conference paper (doi:10.1007/978-3-032-29921-5_10).

0.16

Self-Supervised Learning for Robust Resonance Mass Regression in Cascade Decays

cs.LG hep-ex ·2026-09-15 ·Ho Fung Tsoi, Alex Yang, Luis Felipe Gutierrez Zagazeta, Shion Chen, Dylan Rankin
similarity 0.57
Abstract · 9th Workshop on Machine Learning and the Physical Sciences (ML4PS 2026)

Reconstructing the mass of a heavy resonance from its decay products with missing energy is one of the central tasks that directly determine the sensitivity in new physics searches at collider experiments. Supervised learning approaches to this problem often struggle to generalize well due to the presence of various systematic uncertainties and distribution shifts. Exhausting all possible variations in the labeled data can be very compute-intensive, while a failure of the model to generalize can corrupt the reconstructed resonance widths that are critical in peak-hunting analyses. In this work, following the foundation model paradigm, we use a self-supervised approach to pre-train a transformer encoder with VICReg to learn an embedding invariant to various corruptions, then fine-tune it for mass regression on a heavy resonance with masses ranging from 2.5 to 6.5 TeV and a SUSY-like cascade decay into an eleven-body final state. We show that the pre-trained model reconstructs sharper resonance peaks and has a more stable performance under various realistic corruptions, compared to a supervised model of the same architecture trained on the same augmented data from scratch.

0.17

Thermally Conditioned Time-Series Forecasting of Grain Growth in Polycrystalline Materials

cs.LG cond-mat.mtrl-sci ·2026-11-04 ·Eliane Younes, Elie Hachem, Marc Bernacki
similarity 0.55
Abstract

Grain growth during heat treatment strongly affects the microstructure of polycrystalline materials and, consequently, their mechanical properties. Although numerical methods such as front-tracking or front-capturing simulations can accurately describe grain growth, their high computational cost limits their use for long or non-isothermal thermal cycles. In previous work, grain growth was successfully predicted under isothermal conditions by treating grain size distributions as time series and forecasting their evolution using recurrent neural networks, allowing complete grain growth trajectories to be generated in seconds rather than through costly PDE-based simulations. In the present work, this forecasting framework is reformulated to handle non-isothermal conditions by explicitly incorporating thermal information into the model architecture. Grain size distributions are encoded using a convolutional neural network, thermal descriptors are embedded through a dedicated multilayer perceptron, and temporal evolution is predicted using a recurrent network. Instantaneous temperature and thermal rate are provided at each time step, allowing the model to adapt its predictions to changing thermal conditions. The framework is trained and evaluated on datasets generated from validated front-tracking simulations across a wide range of non-isothermal thermal paths. The results show that the thermally conditioned model accurately reproduces grain growth dynamics under complex thermal histories, achieving, in k-fold cross-validation over all simulations, mean relative errors of 2.99% (one-hour cycles) and 4.51% (four-hour cycles) with coefficients of determination exceeding 0.99, and mean relative errors between 1.91% and 14.66% on ten simulations following four unseen thermal histories of increasing complexity.

0.23

Automated Physics-Informed Neural-Networks-Based Calibration of Highly Segmented Silicon Telescopes

cs.LG physics.ins-detnucl-ex ·2026-09-15 ·M. Rejmund, A. Lemasson, P. Morfouace, D. Ramos, J. Taieb +1 more
published similarity 0.53
Abstract

Transfer and multi-nucleon transfer reactions are essential tools for probing nuclear structure and reaction dynamics, requiring precise determination of the identity, energy, and emission angles of reaction products. The increasing granularity of modern silicon telescope arrays enhances experimental capabilities but challenges detector calibration, as conventional channel-by-channel approaches become inefficient and difficult to scale. In this work, we present a fully automated, physics-informed calibration framework based on neural networks, specifically designed for highly segmented silicon detector arrays. The method formulates calibration as a global optimization problem, in which detector gains and geometrical corrections are determined simultaneously by minimizing the width of the reconstructed excitation energy under two-body kinematics constraints. The approach relies exclusively on experimental data and well-established physical principles, without requiring explicit modeling of detector response. A distinctive feature is the use of multiple neural network sub-models sharing a common loss function with embedded physics constraints, enabling coherent and self-consistent calibration across all detector channels. This strategy ensures scalability, robustness, and reproducibility, making it particularly suitable for next-generation detector systems with increasing complexity. The performance of the method is demonstrated using experimental data from the Particle-Identification Silicon-Telescope Array (PISTA) in high-resolution fission studies in inverse kinematics. The results show excellent agreement with theoretical kinematics, high-quality particle identification, and a significant improvement in calibration efficiency. The proposed framework provides a general and adaptable solution for the calibration of complex detector systems in modern nuclear physics experiments.

0.42

Development and Validation of a Physics-Guided Machine Learning Extrapolation Framework Using a Classical Transient Diffusion Benchmark

cs.LG ·2026-09-09 ·Ashutosh Yadav, Alok Dubey, Prodyut Ranjan Chakraborty, Harshal Akolekar
benchmark similarity 0.53
Abstract

Machine learning models used in engineering are typically trained within limited operating ranges, yet reliable predictions are often required beyond these domains. Consequently, the primary challenge is extrapolation rather than interpolation. Rigorous validation is hindered by the scarcity of data outside the training range. To address this limitation, a novel extrapolation framework is integrated with established machine learning architectures to enable accurate and physically consistent predictions beyond the training domain. The framework is established by systematically evaluating two physics-guided architectures: a Bidirectional Long Short-Term Memory (BiLSTM) network and a Physics-Informed Neural Network (PINN). A classical one-dimensional transient diffusion problem is adopted as a benchmark because its exact analytical solution provides unlimited, reliable data across the spatio-temporal domain, enabling rigorous quantitative validation. The problem is particularly challenging because the solution evolves from an initial singularity through a strongly nonlinear transient regime before approaching a steady-state linear profile. When training data are confined to an intermediate portion of this evolution, backward extrapolation toward the singularity becomes especially demanding. To improve reliability, physics-guided coordinate transformations, boundary-aware learning strategies, and stability-enhancing temporal marching are incorporated. Extrapolation is evaluated using a train-predict-validate-extend strategy, in which validated predictions are recursively added to the training set to progressively extend the prediction horizon. The results demonstrate accurate and physically consistent predictions beyond the training domain, highlighting the framework's potential for engineering applications where data availability is limited.

0.06

Differential Learning for Robust Prediction of Thermal Stability with Application to Energetic Materials

cs.LG physics.chem-phcond-mat.mtrl-sci ·2026-08-24 ·Megan C. Davis, R. Seaton Ullberg, Jeremy N. Schroeder, Andrew H. Salij, Marc J. Cawkwell +3 more
similarity 0.53
Abstract

Predicting thermal stability during handling and storage is essential for the design of safe and reliable energetic materials. However, experimental measurements vary significantly across laboratories due to differences in protocols and analysis methods, making it difficult to train reliable predictive models. We address this challenge through differential learning. Rather than predicting absolute decomposition temperatures, we instead train message passing neural networks to predict relative differences between pairs of molecules. This approach reduces sensitivity to systematic experimental errors and achieves >85% accuracy in ranking compounds by thermal stability, outperforming conventional regression methods on the same heterogeneous dataset. To understand what drives these predictions, we compare neural network models with interpretable alternatives built from descriptors derived from ab initio calculations and cheminformatics software. This analysis identifies bond dissociation enthalpy as a key determinant of thermal stability rankings, providing further insight into the complex chemistry of thermal decomposition. The differential learning framework generalizes across model architectures, from graph neural networks to classical descriptor-based approaches. Our results demonstrate that learning relative properties rather than absolute values offers a practical solution for modeling noisy experimental data, with direct applications in materials design where thermal stability predictions inform safety protocols.

0.33

uFlowCSP: Crystal Structure Prediction using Mean flow generative models

cs.AI cond-mat.mtrl-scics.LG ·2026-09-09 ·Sourin Dey, Dipannoy Das Gupta, Lai Wei, Sadman Sadeed Omee, Jianjun Hu
similarity 0.52
Abstract

Crystal structure prediction (CSP) is fundamental to computational materials discovery. Generative models including CDVAE, DiffCSP, FlowMM, and CrystalFlow learn stable-crystal distributions directly, but diffusion and flow-matching inference requires tens to thousands of sequential network evaluations per candidate. We introduce uFlowCSP, a MeanFlow-based CSP model that learns the average, rather than instantaneous, probability-flow velocity. It generates a complete structure in one to five evaluations, delivering 5x-58x faster inference with equal or better performance. A chemistry- and symmetry-aware Transformer uses canonical atom ordering, global composition, and per-token chemistry embeddings. A coarse crystal-system token is used only during training; it provides additive gains, particularly improving space-group agreement despite being absent at inference, which remains formula-only. On MP-20 with 20 candidates per target, one step matches CrystalFlow (78.38% vs. 78.34%) with 100x fewer evaluations and about 10x lower wall-clock time. Five steps reach 83.64%, exceeding CrystalFlow (78.34% at 2,000 evaluations) and DiffCSP (77.93% at about 20,000), while using 20x fewer evaluations. uFlowCSP generates 10,000 structures in 0.39-1.31 minutes, versus 6.5 for CrystalFlow and 76.1 for DiffCSP. Under CSPBench's energy-ranked top-five structure-and-space-group criterion, five-step uFlowCSP reaches 72%/72%/65% structure, space-group, and consensus match rates. CrystalFlow reaches 78%/73%/68% at 100 steps but falls to 49%/32%/31% at five. Thus, uFlowCSP improves accuracy per network evaluation, not merely peak accuracy.

0.29

Machine Learning Meets High-Energy Nuclear Physics: From Pattern Recognition to Physics-Integrated Discovery

cs.AI hep-phhep-lathep-th+1 ·2026-10-08 ·Xun Chen, Weiyao Ke, Yu-Gang Ma, Long-Gang Pang, Kai Zhou
publishedsurvey similarity 0.52
Abstract · 37 pages, 22 figures, NST accepted

Machine learning (ML) in high-energy nuclear physics (HENP) is entering a new stage in which physical knowledge is incorporated more directly into data analysis, simulation, and physics inference. This mini-review focuses on developments that have matured in the past several years. Whereas earlier applications emphasized event classification, pattern recognition, and surrogate models for selected observables, recent work has moved toward physics-integrated workflows: calibrated Bayesian extraction of QCD matter properties, dense-matter equation-of-state inference from heavy-ion and neutron-star data, generative event modeling, neural unfolding of weak physical signals, differentiable inverse solvers, gauge-equivariant and diffusion-based lattice-field samplers, and neural reconstruction of model functions in holographic QCD. We survey recent applications of ML in heavy-ion collisions, neutron-star physics, lattice QFT, and holographic or continuum QCD. The emphasis is not on ML architectures alone, but on how they enter concrete physics workflows, how physical constraints such as symmetries, conservation laws, causality, thermodynamic stability, and topology are imposed, and how uncertainty quantification and validation determine whether an AI-assisted result can support a reliable physics conclusion.

0.57