CS Paper Radar

CurveCodec 2: Skeleton-agnostic animation compression with a learned entropy model

Mingyi Shi, Huancheng Lin, Taku Komura

cs.GR cs.AIcs.RO ·submitted 2026-10-03 01:54 UTC · v2
code/data

Abstract

Skeletal motion is stored as every joint's transform at every frame, yet most of it is implied by the body rather than by what the motion is about. Compression is one way to ask what a motion must still say once the body is known, and a production codec must answer it for any skeleton with a stated error bound. Our earlier codec, CurveCodec, matched the mean error of ACL, the production library of modern game engines, with a learned prior over sparse anchors, but not ACL's worst case, and it counted its payload as floats rather than bits. Here we ask where the redundancy of skeletal motion lies and which part of a codec a learned model should take over. Measurements give three answers. At production precision the largest saving comes from predicting each quantized curve from its own past, the second from choosing per joint, in closed loop through the hierarchy, which samples not to code. On the gaps such an encoder leaves, a nearest-neighbour oracle over millions of training samples is no better than linear interpolation, and no learned in-betweener we tried paid for itself. What a network does learn is the distribution of the residuals the codec must send. CurveCodec 2 codes every sub-track as a curve in the log map, quantized in closed loop and thinned to rate-distortion-selected keys, with residuals entropy-coded under a small learned model whose integer inference is bit-exact across platforms. Two contracts are verified on every decoded clip: ACL's own worst case per joint within a stated tolerance, or ACL's mean error per clip. On a held-out test side of 4,472 clips from 33 datasets, CurveCodec 2 needs 0.37x ACL's bytes at ACL's default precision of 0.01 cm under the worst-case contract and 0.22x at 0.1 cm under the mean contract, decodes on one CPU core, and transfers without retraining to a species absent from training. Project page: https://rubbly.cn/publications/curvecodec/

Comment
12 pages, 11 figures. Project page: https://rubbly.cn/publications/curvecodec/

Closest papers

Nearest neighbours by meaning across the whole index.

Does Pose Encoding Matter? Analyzing Geometric Representations for Discrete Motion Vocabulary Learning

cs.CV cs.AIcs.DM ·2026-11-08 ·Amir Kimiyaie, Nahal Mafi, Hamed Tabkhi
similarity 0.62
Abstract

Compressing continuous human motion into a finite vocabulary of discrete tokens is now the first stage of many motion understanding and generation pipelines. Vector quantization partitions a latent space into Voronoi cells around a finite codebook, but the geometry of that latent space is inherited from the input pose encoding, and it is unclear which encoding admits an efficient discretization. We study four encodings that place skeletal motion in different geometric spaces: Gaussian joint heatmaps on the pixel lattice, which we show to be a morphological dilation of the joint point set by a quadratic structuring function; root-relative joint positions in Euclidean space; local joint rotations on $\SO$ through a continuous 6D embedding; and a redundant full kinematic encoding. For each, we train VQ-VAE tokenizers whose codebooks lie on the unit hypersphere, varying codebook size, temporal stride, and code dimension. Beyond reconstruction, we measure codebook utilization and the effective vocabulary size, i.e., the number of equiprobable spherical Voronoi cells with the same entropy as the observed token distribution. Rotation and position encodings keep converting additional codewords into effective vocabulary, whereas the full kinematic encoding saturates at a few hundred effective cells and heatmaps at fewer than sixty. The smallest code dimension gives the highest utilization for three of the four encodings, and the effect of temporal stride depends on the encoding. Encodings of the same pose family can thus yield effective vocabularies differing by an order of magnitude, a difference that reconstruction loss alone does not reveal, which points to input geometry as a first-order design choice in motion tokenization.

0.17

Retargeting Motions to Diverse Skeletons via Learnable Flattening

cs.CV cs.AI ·2026-09-29 ·Kia-Jüng Yang, Fabian H. Sinz, Paweł A. Pierzchlewicz
similarity 0.62
Abstract · 24 pages, 9 figures

Cross-structural motion retargeting aims to transfer motion between different skeletal topologies. Despite recent progress, existing state-of-the-art models struggle with reliability in zero-shot settings, i.e. skeletons with different topologies which were unseen during training, and recent Transformer-based attempts have failed to outperform specialized geometric methods. We bridge this gap with a Transformer Autoencoder that learns a topology- and translation-invariant latent space. Our core contribution is a learnable flattening of skeletal graphs that captures both local dependencies and global structure. Unlike the standard transformer architecture, which adds positional information to token content, we integrate graph-based positional encodings multiplicatively, a design choice that follows directly from our flattening formulation. The resulting model handles diverse skeletal topologies within a single unified architecture and trains in a fully unsupervised manner, requiring no paired retargeting data. Ablation studies show, that the graph encodings, multiplicative formulation, and Transformer backbone is critical for the performance. In zero-shot evaluations, our method reduces global joint position error by $43-47\%$ over current benchmarks. A user study ($n = 37$), including expert animators, further ranks our approach highest in motion alignment and physical plausibility ($p < 0.05$). These results demonstrate that our model design is key to making transformer architectures effective for motion retargeting, outperforming existing approaches.

0.18

TopX: Text-to-Motion for Unseen Skeletons from the Skeleton File Alone

cs.CV ·2026-10-25 ·Tengjiao Sun, Pengcheng Fang, Xiaoyu Zhan, Dongjie Fu, Xiaohao Cai +1 more
benchmarkcode/data similarity 0.61
Abstract

Text-to-motion models generate motion only for the skeletons they were trained on, while a new character arrives as a skeleton file and nothing else. We study text-to-motion for skeletons unseen in training, without clips of the character, templates, retargeting or fine-tuning. We present TopX, a 73M-parameter flow-matching transformer that generates joint rotations and a root trajectory for any skeleton from its kinematic tree, rest pose and joint names. Motion is normalised by the rest pose and the size of the skeleton, and the rest pose is encoded as a world-frame descriptor that is independent of how the rig's author oriented each joint, while rest conventions are randomised during training. Attention is factorised over the joints and the frames of a motion. Across joints, queries and keys are rotated by HK-RoPE, a heat-kernel rotary encoding of the skeleton graph that is defined for every tree and does not change with the order of its joints or the eigenbasis of its Laplacian; across frames, they are rotated by a rotary encoding of frame order. To evaluate this generalisation, we build SkelShift, which unifies four motion corpora under one codec and holds out whole skeletons, tree classes and species, so that each test bucket isolates one kind of skeleton shift: topology, joint count, body plan, species or rig source. It scores motion quality without a learned evaluator. A single model animates every benchmark skeleton (4--117 joints) directly from its skeleton file and generates up to 240 frames. On held-out game species its motion is about as close to the real clips as two halves of the real clips are to each other (kernel distance 0.127 against 0.124), and text-to-motion retrieval reaches R@1 0.953, compared with 0.929 for real motion. Project page: https://chdtevior.github.io/TopX-page/.

0.17

FMT: Lossless Image Compression in a Fixed Number of Parallel Steps

cs.CV ·2026-11-17 ·Ammar Ali
position similarity 0.61
Abstract

Learned lossless codecs make smaller files than common classical codecs, yet the images we archive and train on still use classical codecs. A main reason is time: a learned codec takes seconds to decode a photo that a classical codec opens in milliseconds, and their faster variants give up most of their gain in size. We argue that much of this time is spent waiting, not computing: the network waits for the values it conditions on, and the arithmetic decoder reads them one at a time. We introduce FMT (Fixed-step Multiscale Tree), a lossless image format whose decoding order and entropy coder are designed together so that neither wait grows with the image. FMT stores an image as a coarse-to-fine tree whose steps hold independent values: a GPU predicts each step at once and decodes it in parallel rANS lanes that carry their states from step to step, so an image of any size decodes in a fixed number of sequential steps. On this tree we build a family of bit-exact codecs, from a rule with no network to large networks, and no codec we ran on the same GPU beats any of them on both size and speed. Without a network, FMT beats NVIDIA's HTJ2K on size and speed; with a large one, it decodes Kodak photos 9 to 61X faster than learned codecs we ran on the same A100, at the same size or smaller.

0.39

ETA-Motion: Efficient Topology-Agnostic Motion Diffusion via Sparse Joint Learning

cs.CV ·2026-10-28 ·Seoyoung Hwang, Tae-Kyun Kim
publishedcode/data similarity 0.58
Abstract · Accepted to WACV 2027; Project page : https://sy-hwang.github.io/eta-motion-page/

Topology-agnostic motion generation aims to synthesize motions for diverse characters with arbitrary skeletons. Unlike conventional motion generation, which assumes a fixed skeletal template, this setting must handle diverse joint configurations and inconsistent joint semantics across characters. Existing methods address this challenge through dense full-joint modeling, which incurs substantial computational cost and hinders learning transferable motion patterns across diverse skeletal topologies. We present ETA-Motion, a topology-agnostic motion generation framework based on sparse joint learning. Instead of learning motion from all joints, our method uses a compact subset of joints to reduce redundancy and trains the motion generator on the resulting sparse skeleton. To facilitate correspondence across diverse topologies, we introduce semantic joint embeddings that combine textual and visual cues, together with topology-aware training objectives for preserving skeletal structure. Although ETA-Motion is trained only on sparse skeletal observations, it supports full-skeleton motion generation during inference. Experimental results demonstrate that ETA-Motion outperforms existing topology-agnostic baselines while significantly improving efficiency and generalization to unseen motions and unseen topologies.

0.29

Joints, Camera, Action! Co-Generating 3D Motion and Video for Arbitrary Rigs

cs.CV cs.AIcs.GRcs.LG+1 ·2026-10-20 ·Noam Rotstein, Yoad Tewel, Chen Tessler, Haggai Maron, Gal Chechik +3 more
code/datacommunity pick similarity 0.58
Abstract

Video generation models can now depict remarkably realistic motion. Yet it is unclear how to use this motion beyond pixels: to animate a specific 3D asset and replay the animation in its 3D scene. For instance, a video model can show a monkey jumping over a crossbar, but it cannot return that jump as replayable 3D motion placed in the 3D scene. Here we present a model that directly co-generates the video and 3D motion for any supplied rig, along with a camera that registers this motion to the scene. Prior video-motion models either handle only human skeletons, often adding billions of parameters, or triangulate 3D motion from generated 2D pose maps. We instead keep 3D motion in a separate model that supports arbitrary skeletons, and connect it to a pretrained video model through a small set of cross-attention layers. This separation lets the motion model first learn how skeletons move from motion-only data, which is easier to obtain and augment than paired video. Additionally, our model learns to locate each joint in the video frames, which lets us recover the camera and place the 3D motion in the scene. To train across many skeletons, we use a generative video editor to place animated 3D assets in scenes suited to their actions, curating the edits so their known motion remains valid. Together with human and robot video, this yields nearly 200K training pairs. Our evaluations demonstrate that our model animates diverse rigs from text more faithfully than video-first pipelines, and its motion responds to the surrounding scene. It also turns video into rig motion, rig motion into video, and enables keyframe-based control of the 3D motion. Videos and additional results are available on our project page: https://research.nvidia.com/labs/par/projects/jca/.

0.35

OrBIT: Structure-Guided Embedding Compression

cs.LG ·2026-10-07 ·Yunied Puig, Amit Kumar Jaiswal
similarity 0.57
Abstract

Embedding tables are among the largest components of modern language models. Most compression methods fix a coding geometry such as coordinate blocks, low-rank subspaces, or unrestricted codebooks, and optimize within it. We instead ask whether the coding geometry can itself be discovered. We introduce \emph{OrBIT}, a structure-guided embedding compression framework that learns reusable local geometry from orbit dynamics and uses it to constrain a small set of shared codewords. The global reconstruction residual then decides where the fixed coding budget is spent, while redundant overlapping charts let local errors compensate one another after gluing. Our theory shows how tight-chart geometry controls distortion, how the global residual directs sequential allocation, and how data-geometry-guided refinement improves the codec. The resulting orbit machinery is compiled away, leaving a compact decoder in which the learned structure governs what is stored, where capacity is allocated, and how local information is assembled globally. Across four LLM embedding tables, OrBIT achieves $37.9\times$ compression on GPT-2 and over $23\times$ on each 7B table relative to 16-bit storage, while delivering competitive rate-distortion performance against established quantization and low-rank baselines.

0.19

UniMate: One Unified Model to Animate Diverse Skeletons

cs.CV cs.GRcs.LG ·2026-09-04 ·Linzhan Mou, Jiahui Lei, Zhiyang Dou, Chenyue Cai, Chaoyue Song +2 more
publishedcode/data similarity 0.57
Abstract · SIGGRAPH Asia 2026. Project page: https://linzhanmou.com/unimate/

Recent advances in automatic rigging now deliver animation-ready 3D assets at scale, yet generating the motion to drive them remains a bottleneck. Existing learned animators are topology-constrained: they rely on category-specific templates or require per-skeleton fine-tuning and reference motions at inference. We present UniMate, a unified foundation model that synthesizes articulated motion for arbitrary skeletons from a rigged 3D asset and a text prompt, with no test-time optimization or per-skeleton retraining. UniMate introduces a topology-aware diffusion transformer, which integrates skeletal topology into attention via three mechanisms: (1) a graph-aware attention bias from pairwise joint relations and geodesic distances; (2) a spectral rotary position embedding generalizing RoPE to arbitrary kinematic trees via the graph Laplacian; and (3) a global topological conditioner attention-pooled from the rest-pose skeleton. We also curate UniML3D, 13,006 motion sequences spanning bipedal, quadrupedal, avian, marine, insectoid, serpentine, and articulated rigid objects with unified canonicalization and text pairing. Trained on this dataset, UniMate outperforms state-of-the-art baselines in quality, generalization, and efficiency, and supports zero-shot cross-topology transfer, in-betweening, expansion, and text-guided editing. Our project page is available at https://linzhanmou.com/unimate/.

0.61