CS Paper Radar

Synthetic-to-Real ViT-Based Pose Estimation of a Noncooperative UAV

Krishnanujam Srinivas, Hanish Acharla, Brij Agrawal, Leonardo Herrera

cs.CV ·submitted 2026-10-03 06:59 UTC · v1

Abstract

Remote pose estimation of noncooperative Unmanned Aerial Vehicles (UAVs) from imagery is critical, as they cannot be influenced or instrumented in advance. Deep-learning-based approaches offer a promising solution; however, their development is constrained by the cost and difficulty of acquiring large-scale real-world datasets with accurate pose labels. Synthetic imagery provides an alternative, but models trained on synthetic data must overcome the synthetic-to-real domain gap to generalize to real-world imagery. This work investigates the inherent synthetic-to-real generalization capability of a Vision Transformer (ViT)-based model for monocular UAV pose estimation. The proposed approach employs a self-supervised DINOv2 backbone and is trained exclusively on labeled synthetic imagery while being evaluated on labeled real-world imagery. Pose ambiguity-aware strategies are incorporated during training and inference to address ambiguities arising from the projection of a three-dimensional target onto a two-dimensional image plane and from target symmetries. An $α$-$β$ filter is further integrated during inference to improve pose estimations. To assess the model under operational requirements, it is evaluated in terms of Mean Angular Error (MAE) and inference time, both before and after filtering, using a real-world dataset containing 77,077 labeled UAV images. Before filtering, the model achieves an MAE of $19.18^{\circ}$ and an inference time of $13.25$ ms, whereas after filtering, these values are $8.74^{\circ}$ and $13.42$ ms, respectively.

Comment
12 pages, 8 figures, 5 tables

Closest papers

Nearest neighbours by meaning across the whole index.

AirAlign: Geometry-Aware Relative Pose Alignment for UAV Last-Meter Navigation

cs.CV ·2026-08-22 ·Jinyi Zhou, Shuo Feng, Yufei Wu, Piji Li
similarity 0.70
Abstract

Unmanned aerial vehicle (UAV) navigation in modern low-altitude environments requires more accurate pose alignment in the final approach stage for target information acquisition or manipulation, making "last-meter" navigation increasingly important. However, severe viewpoint and appearance variations make this task challenging. To tackle this problem, we propose AirAlign, a framework for RGB-only image-pair relative pose alignment for UAVs. AirAlign uses a pretrained visual geometry reconstruction model as the backbone to extract geometry-aware features from source-target image pairs. In addition, to better utilize the limited training data, we split the training set into multiple scene-disjoint folds for unseen cross-validation and model selection. During inference, the predictions of the selected models are averaged to form the ensemble output of the overall framework. Experiments on the PairUAV challenge at the ACMMM 2026 Workshop on UAVs in Multimedia demonstrate the effectiveness and robustness of our method, while comprehensive ablation studies validate the contribution of each component.

0.48

Back to the Feature: Zero-Shot 6DoF Pose Estimation via Dense Local Features

cs.CV ·2026-09-06 ·Ali Rafiaei, Michael Greenspan
publishedbenchmark similarity 0.69
Abstract · Accepted at BMVC 2026

We present B2TFPose, a training-free zero-shot method for 6DoF pose estimation of unseen objects from RGB images. Using a single frozen DINOv3 vision transformer as its only pretrained component within the pose estimation pipeline, B2TFPose extracts dense patch-level features that generalize across the synthetic-to-real domain gap without any task-specific fine-tuning, revisiting the classical local feature matching paradigm through the lens of large-scale self-supervised foundation models. Three contributions advance the training-free state of the art. A geodesic non-maximum suppression strategy retrieves a viewpoint-diverse template set for coarse-to-fine correspondence matching. Render-guided Re-Correspondence (RRC) synthesizes object-specific views at the estimated pose and re-establishes dense 2D-3D correspondences to sharpen the initial estimate without additional learned parameters. A multi-mask hypothesis selection strategy jointly scores competing segmentation candidates to resolve segmentation ambiguity. On the seven core datasets of the BOP Benchmark, B2TFPose achieves 40.7 mean AR without refinement and 56.4 with refinement, establishing state-of-the-art performance among training-free RGB methods and outperforming trained counterparts including GigaPose and GenFlow, at competitive inference speed.

0.37

GenCOPE: Syn2Real Generalized Category-Level Object Pose Estimation for Robotic Picking

cs.CV ·2026-10-01 ·Jian Liu, Wei Sun, Zhenqi Dai, Hui Yang, Jian Xiao +2 more
top venuecode/data similarity 0.68
Abstract · Accepted by NeurIPS'26

Category-level object pose estimation (COPE), capable of generalizing to intra-class unknown objects, has become a core technique for robotic 3D scene understanding. However, existing COPE methods still require labor-intensive recollection of real-world training data for novel object categories, which limits their scalability in practical applications. This paper aims to achieve synthetic-to-real (Syn2Real) generalized COPE, where a model is trained solely on rendered synthetic data and directly generalized to real-world deployments. The central challenge lies in the significant domain gap between synthetic and real-world data, particularly in texture appearance. To address this, we aim to enhance domain generalization by learning domain-invariant representations that capture semantic commonalities among objects within the same category. We introduce 2D and 3D semantic consistency constraints to reduce the sensitivity of feature encoders to domain-specific features. In addition, we propose an end-to-end pose regression framework that performs 2D-3D cross consistency learning, leveraging dense cross-modality fusion to further refine pose estimation. Since simplicity and effectiveness are essential for real-world robotic deployment, our model operates exclusively on global features, yielding a highly lightweight and efficient architecture. Extensive experiments on the REAL275 and Wild6D benchmarks, as well as real-world robotic manipulation scenes, show superior Syn2Real generalization performance of our paradigm. Code and demos are released at https://paperreview99.github.io/GenCOPE/.

0.42

VGM-VS: Rethinking Visual Geometry Model for High-Precision Visual Servoing

cs.RO cs.CV ·2026-09-23 ·Yimin Pan, Sen Wang, You Zhou, Jianfeng Gao, Pengbo Sun +2 more
code/data similarity 0.66
Abstract · 8 pages, 3 figures. Corresponding author: Sen Wang. Project page: https://yimin-pan.github.io/vgm-vs/

We present VGM-VS, a visual servoing method built on a pretrained feed-forward visual geometry model. Given the current view and a reference image captured at the target configuration, we estimate the relative camera pose with a visual geometry model and apply it iteratively as the pose increment of a closed-loop pose-based visual servoing (PBVS) scheme. The geometry-aware representation acquired from large-scale pretraining keeps this estimate reliable when the target is occluded, weakly textured, or covers only a small part of the image. However, the scale ambiguity inherent to these models leaves the predicted translation defined up to an unknown scale, while the pose increment must be metric for robot control. We close this gap with a scene-specific metric adaptation: the robot autonomously records image--pose pairs along a predefined motion starting from the target pose, and we fine-tune the camera head on these data, jointly learning the hand--eye transform and thus removing the need for a dedicated calibration process. We evaluate our method on three real-world assembly tasks with demanding tolerances: USB-C cable picking, cable insertion, and RAM insertion. Running in real time at 30Hz, VGM-VS converges to submillimeter terminal accuracy on the cable tasks, and reaches success rates of 90--100\% when the target is moved during servoing. It converges in all trials under initial displacements of up to 30cm from the reference pose and with 50\% of the target object occluded, outperforming the compared visual servoing baselines.

0.34

Training with synthetic data for drone detection in thermal imagery

cs.CV cs.AIcs.ETcs.RO ·2026-08-18 ·Tanel Liiv, Sander Soodla, Nzamba Bignoumba, Alma M. Liezenga, Toomas Pruuden
top venue similarity 0.66
Abstract · To be presented at SPIE: Sensors + Imaging, Artificial Intelligence for Security and Defence Applications IV

Ground-to-Air (G2A) drone detection in medium- and long-wave infrared (MWIR/LWIR) imagery is challenging due to reduced texture information, sensor noise, weak thermal contrast, and the scarcity of annotated data. This work investigates a synthetic-first training strategy that combines synthetic scene generation with fine-tuning on real data. We show that synthetic data provides an effective basis for learning initial object representations, while real in-domain thermal imagery is still essential for reliable deployment. Even small amounts of real IR data substantially reduce domain gaps. Our experiments indicate that dataset alignment has a stronger impact on performance than model scale. Finally, our analysis of the dataset suggests that semantic alignment in feature space is the strongest predictor of model performance, while radiometric properties such as entropy and dynamic range also contribute to detection robustness. This work provides a foundation for combining synthetic and real IR data for effective G2A drone detection.

0.28

Robust Validation to Geometric Perturbations for Autonomous Pose Estimation

cs.CV ·2026-08-21 ·Gregoire Theau, Melanie Ducoffe
position similarity 0.65
Abstract · 15 pages, 7 figures

Deploying autonomous systems in safety-critical domains demands guaranteed robustness against physically plausible geometric perturbations rather than abstract pixel-wise noise. In vision-based navigation and autonomous landing, machine learning components require rigorous validation under dynamic operational conditions such as camera rotations and lighting shifts. Extending findings on the failure of first-order spatial attacks in classification, we show that standard gradient-based heuristics (e.g. APGD) similarly fail on for pose estimation, often performing worse than a simple random sampling baseline. To overcome these optimization bottlenecks, we reformulate pose estimation robustness within the framework of Global Lipschitzian Optimization (GLO). We argue that GLO offers a principled approach to robust validation, effectively localizing global optima with strong theoretical convergence guarantees. We evaluate this framework on a YOLOv8-Pose keypoint detector with a Perspective-n-Point (PnP) solver against rotation and contrast. In our evaluations, GLO successfully isolates critical failure modes where position deviations exceed safe operational limits, while rapidly pruning the search space by over 80%. To the best of our knowledge, this is the first study to extend geometric robustness validation to continuous keypoint regression and deep object detection, establishing a practical step toward certifying robust autonomous perception.

0.31

On-the-Fly3R: Towards Robust Online 3D Reconstruction with Feed-Forward 3R Models for Large-Scale UAV Scenarios

cs.CV ·2026-09-01 ·Zhe Shen, Liyuan Lou, Yifei Yu, Guanbo Wang, Quanjian Ji +2 more
code/data similarity 0.64
Abstract · This paper was submitted to the ICRA 2027 for consideration. Copyright would be transferred if it got accepted

While feed-forward 3D reconstruction (3R) offers efficient end-to-end modeling, its application in large-scale UAV mapping is hindered by the prohibitive memory cost of Transformer attention. Current scalable streaming 3R methods assume temporally and spatially continuous inputs, rendering them ineffective for the weakly ordered or unordered image streams common in cross-strip UAV operations. To address this, we propose On-the-Fly3R, a training-free, progressive online 3D reconstruction framework for large-scale UAV images that upgrades various 3R backbones for large-scale UAV scenarios. Our method enables reconstruction from unordered inputs via retrieval-guided dynamic subset construction, which adaptively selects spatially relevant images. To further improve the robustness, a validation-rejection-retry mechanism is designed to guarantee global consistency, performing a pre-integration consistency check and automatically rejecting misaligned images and retrying with alternative subset. Finally, inspired by VSLAM, pose graph optimization based on the retrieval loop closure is employed to mitigate camera drift. Evaluations on several UAV benchmarks show that our On-the-Fly3R successfully scales various 3R models to over 5,000 images across square-kilometer UAV scenes, delivering substantially superior accuracy compared to several SOTA streaming 3R methods. Code is available at https://github.com/Sh1nZzz/On_the_Fly3R

0.47

EgoRayFormer: Ray-Space Stereo Refinement for Egocentric 3D Human Pose Estimation

cs.RO ·2026-10-19 ·Haozhe Wang, Songyuan Wu, Jihai Xu, Jie Zhao
similarity 0.64
Abstract

Head-mounted stereo fisheye cameras provide a compact view of the wearer's body, but strong distortion, partial visibility and a short baseline make 3D pose estimation difficult. Existing refinement decoders sample image features independently in each view, without requiring the samples to correspond to a common 3D hypothesis. We introduce EgoRayFormer, a causal pose estimator that couples stereo feature sampling and geometric refinement in ray space. For each joint, the decoder projects shared 3D hypotheses along and around its viewing ray into both images. A geometric branch then corrects the projected joint locations and intersects the resulting rays; a learned gate blends this geometric estimate with a learned pose update. This formulation introduces an explicit stereo constraint while retaining flexibility when the rays provide weak depth constraints. In local evaluations on the official device-relative test splits, EgoRayFormer achieves three-seed mean MPJPEs of 17.64 mm on UnrealEgo2 and 49.55 mm on UnrealEgo-RW, improving to 47.57 mm with UnrealEgo2 pre-training. In paired validation ablations, removing the geometric branch increases MPJPE in all three seeds at both input resolutions. With a common ResNet-18 encoder and input resolution, our system reduces RW test MPJPE by 9.09 mm relative to the device-relative EgoPoseFormer baseline. A separate protocol analysis quantifies the difference between device-relative and oracle-root evaluation.

0.12