CS Paper Radar

FLAT: Smoothing the Rugged Landscape for Learnable, Sample-Efficient Traffic Calibration

Haopeng Deng, Thomas He, Dayuan Wang

cs.CE physics.soc-phcs.LG ·submitted 2026-10-03 07:05 UTC · v2
code/data

Abstract

Calibrating microscopic traffic models for digital twins is an expensive black-box optimization problem: tuning car-following and lane-changing parameters requires a full simulation run, affording only a tight budget per recalibration window. Matching raw trajectories yields a rugged objective that sparse surrogates cannot learn, reducing sequential acquisition to near-random probing. We present FLAT, which couples what to optimize with where to sample next. An eight-dimensional behavioral fingerprint smooths the parameter-error landscape, making the objective learnable from a few dozen samples; annealed lower-confidence-bound (LCB) acquisition then spends each remaining run where it most reduces error. The surrogate, interchangeable among a Gaussian process (GP), random forest (RF), or multi-layer-perceptron (MLP) ensemble, plugs into the same LCB loop. Across six heterogeneous real-world scenes, FLAT-GP achieves the lowest scene-averaged behavioral error, winning 6/6 scenes against SPSA, GA, and CMA-ES and 5/6 against TPE under the matched budget. Some baselines need up to 4.4 times more simulations to match. Ablations show objective choice shifts final behavioral error by 81% on average, removing sequential LCB raises the six-scene mean by 20%, and surrogate choice shifts it by at most 4.2%, confirming gains trace to objective geometry and sequential allocation rather than surrogate capacity.

Comment
9 pages, 28 figures. Code and cache: https://github.com/QianyHP/FLAT-calibration

Closest papers

Nearest neighbours by meaning across the whole index.

Scaling Curriculum Learning For Autonomous Driving

cs.AI cs.LG ·2026-08-23 ·Cevahir Koprulu, David Paz, Feng Tao, Yuliang Guo, Xinyu Huang +2 more
similarity 0.63
Abstract · 31 pages, 18 figures. Under review at NeurIPS 2026

Batched simulators for autonomous driving have recently enabled training reinforcement learning (RL) agents at scale, encompassing thousands of traffic scenarios and billions of interactions within a matter of days. Although such high-throughput feeds RL algorithms faster than ever, their sample-efficiency has not kept pace: As the standard training scheme, domain randomization uniformly samples scenarios, thereby consuming a vast number of interactions on cases that contribute little to learning. Curriculum learning offers a remedy by adaptively prioritizing scenarios that matter most to policy improvement. We present CL4AD, the first integration of curriculum learning into batched autonomous driving simulators by framing scenario selection as an unsupervised environment design problem. We introduce utility functions that shape curricula based on success rates and the realism of the agent's behavior, in addition to existing regret-estimation functions. Large-scale experiments in GPUDRIVE demonstrate that curriculum learning achieves a 99% success rate a billion steps earlier than domain randomization, reducing wall-clock time by 77%, and outperforms heuristic curricula with static and dynamic attributes, with only one exception at the largest scale. An ablation under limited compute shows that curriculum learning improves sample efficiency by 67%. We also investigate how utility functions behave at scale, and how prioritized scenarios evolve during training. We release an implementation of CLForAD in GPUDRIVE.

0.35

Fixing the Twin, Not the Detector: Sim-to-Real Roadside LiDAR Detection from Digital-Twin Data

cs.CV cs.LG ·2026-11-19 ·KuanLin Chen, Feng-jui Kuo
publishedcode/data similarity 0.62
Abstract · 8 pages, 1 figure, 5 tables. Accepted to the IEEE BigData 2026 Cup (UCF UrbanTwin Sim2Real LiDAR Challenge); first place, LUMPI track. Code:…

Roadside LiDAR detectors are expensive to train on real labels, and digital twins promise to replace these labels, but a detector trained on a twin meets a different sensor, different objects and different annotation conventions on the real site. We describe the pipeline that placed first in the LUMPI track of the UrbanTwin Sim2Real LiDAR Challenge (IEEE BigData 2026 Cup, 0.5541 combined score) and fifth on its V2X-Real track (0.8102). Every detector is a CenterPoint model trained only on synthetic data, on a single 8 GB laptop GPU. Most of the gain came from correcting differences between the twin and the real site rather than from the detector. We align the twin's coordinates, point density and box convention with the test sensor, generate the pedestrians and riders that the twins lack, plus street clutter as unlabeled negatives, and rebuild twin objects at real size and real point density. A non-learned resampling to the per-cell point density of unlabeled real frames lifts LUMPI realism from 0.589 to 0.947, against 0.949 between real frames. Label-free post-processing then exploits what a fixed roadside sensor guarantees: static structures recur in every frame, and real objects have characteristic point statistics. Reporting the validation and test gain of each component side by side, we find that corrections of systematic sim-to-real differences transfer to the test set, typically keeping a quarter to three quarters of their validation gain, while choices that fit the few objects of a validation set do not.

0.43

Imitation Learning for Autonomous Driving in CARLA

cs.AI cs.RO ·2026-09-15 ·Jordy Kieto
code/datahot direction similarity 0.62
Abstract · 13 pages, 4 figures. Code, data samples and trained policy: https://github.com/JordyKieto/carla-imitation-learning

Behavioral cloning trains a policy offline on expert demonstrations, but deployment is closed loop: each action affects the observations the policy receives next. We study how much closed-loop driving competence a compact multimodal policy can acquire from offline demonstrations in the CARLA simulator. The policy uses five-frame histories of RGB images, LiDAR, vehicle telemetry, and lane waypoints to predict throttle, brake, and steering at 20 Hz. Demonstrations were collected in three stages, ending with a systematic route-generation procedure that enumerates spawn points and feasible maneuvers and verifies completed autopilot routes. The released 1.36 million parameter policy was trained on 236,882 windows, representing about 3.3 hours of driving from 448 captures. The resulting policy drives autonomously for hours on training and held-out routes. In our runs, it did so without collisions and also transferred qualitatively to an unseen CARLA town with different road geometry. We also observed recovery from large trajectory deviations, although we do not claim systematic recovery without controlled evaluation. We report offline metrics and distinguish measured results from qualitative closed-loop observations. We release the code, trained checkpoint, ONNX model, data sample, and an evidence audit for the reported claims.

0.59

REARL: A Closed-loop Autonomous Driving Simulation Enhancement Framework with Real Traffic Data and Large Language Models

cs.LG ·2026-09-17 ·Xiaojun Bi, Jun Jiang, Yiwen Sun, Quanyi Ou, Yizhi Ma +4 more
similarity 0.61
Abstract · 14 pages, 8 figures, 3 tables. Corresponding author: Yiwen Sun. This work was supported by the National Natural Science Foundation of China …

Accurate simulation is crucial for autonomous driving development, yet capturing real-world traffic complexity remains challenging. Existing simulators that rely on predefined rules or static data playback struggle with dynamic traffic. CRITICAL uses real traffic data and a large language model (LLM) to adjust the initial simulation configuration, but the simulated distribution still diverges from real traffic as the rollout evolves. We propose REARL, a closed-loop simulation enhancement framework that integrates real traffic data with LLMs. Real traffic data are clustered, and each cluster center is used as a representative scenario that provides typical real-world traffic patterns for the LLM. A timed sliding-window detector then monitors discrepancies in vehicle speed distribution and mean spacing between pairs of vehicles. If a metric exceeds a threshold, the LLM adjusts vehicle decision-making; otherwise the existing controller is kept. The LLM also selects a matching real vehicle from a traffic snapshot and modulates the simulated vehicle with reference to that real action. In a controlled HighD highway setting, compared with the CRITICAL baseline and a PPO-based learning baseline, REARL reduces the Hellinger distance for speed distributions to 0.3067 and the MAPE for mean spacing to 0.8371, while achieving a time headway (THW) of 22.8575 and a lane change rate of 0.0708.

0.20

PhaseShift: Topology-Aware Data Harmonization and Model Consolidation Across Signalized Intersections

cs.AI cs.RO ·2026-08-26 ·Yash Ranjan, Artur Kumik, Rahul Sengupta, Anand Rangarajan, Sanjay Ranka
similarity 0.61
Abstract

Learned traffic-behavior models are commonly trained separately for each intersection, creating model portfolios that cannot share evidence across sites. We present PhaseShift, a topology-aware framework that harmonizes heterogeneous roadside trajectories into a shared actor-centric representation and trains one reusable backbone. Ego-relative coordinates, trajectory-induced movement paths, normalized signal context, and variable-cardinality interaction tokens remove site conventions while preserving behaviorally relevant topology. The backbone supports pooled operation, zero-shot at a held-out intersection, and low-data adaptation. We evaluate five intersections in two Florida regions on balanced field data, 100k training windows and equal-sized test sets per site under a replay-conditioned, best-of-sampled-trajectory protocol. At 10s, one pooled model lowers both minADE and minFDE relative to trained local models at all five sites, with median reductions of 36.8% and 22.0%. Leave-one-intersection-out deployment, including one cross-region fold, beats local training on both 10-s metrics at four of five sites, although short-horizon performance is less uniform. Fine-tuning with 1,000 target update windows improves on zero-shot at three sites and is the strongest regime at one. At site 7, every cross-site mixture sharply lowers long-horizon error under a fixed 100k-window budget; test-likelihood gains argue against a best-of-sample dispersion-only explanation. Local models fall behind calibrated IDM at the two highest-flow sites after long autoregressive rollouts; pretrained-backbone regimes do not. Within this five-site evaluation, PhaseShift demonstrates consolidation across heterogeneous physical control settings while identifying sites that still require adaptation. The protocol measures conditional single-vehicle generation under replayed context, not closed-loop traffic simulation.

0.11

PAD: Policy-Aware Data Valuation for Autonomous Driving

cs.RO ·2026-11-19 ·Chengkai Xu, Yicheng Guo, Jiaqi Liu, Yiming Cui, Shiyu Fang +3 more
similarity 0.60
Abstract

End-to-end autonomous driving increasingly depends on scaling training demonstrations, yet data growth does not guarantee proportional gains. However, additional data do not guarantee better policies: a demonstration that benefits one planner may be redundant or harmful to another. Existing curation methods typically infer data value from intrinsic sample properties or training-dependent proxies that do not measure downstream policy utility. To address this, we introduce \textbf{Policy-Aware Data Valuation (PAD)}, a framework that assigns each candidate demonstration a utility specific to the target driving policy. PAD combines scene-level calibration feedback with projected policy gradients and a regularized approximation of local training geometry, producing scalable influence-based values for the policy. A controlled group-removal study establishes the directional fidelity of these values, while cross-planner analysis shows that the same candidate pool induces markedly different rankings across planner families. On DiffusionDrive, PAD improves EPDMS over real-only training by $3.5$ points on NavTest and $5.0$ points on NavHard. Policy-specific curation consistently outperforms real-only and full-pool training across diffusion-, regression-, and flow-matching-based planners while substantially reducing scene-level regressions. These results establish policy-aware data valuation as a basis for replacing indiscriminate data accumulation with targeted policy improvement, enabling more efficient and reliable scaling of autonomous-driving systems.

0.40

Driving on Memory

cs.CV cs.LGcs.RO ·2026-08-31 ·Christian Löwens, Thorben Funke, Alexandru Paul Condurache
benchmarkcode/data similarity 0.60
Abstract

End-to-end autonomous driving models plan future trajectories from raw sensor input. While earlier driving benchmarks often measured deviation from the human trajectory, current benchmarks such as NAVSIM and Bench2Drive evaluate models with richer simulation-based metrics intended to capture safe and compliant driving. A high benchmark score should reflect that a model can understand the scene in front of it and act accordingly. But how much of that score specifically comes from reacting to the dynamic part of that scene? To probe this, we remove a model's camera input and replace it with memories from prior drives at the same location. The retrieved memories can provide persistent scene information, including road layout and location-conditioned regularities, but not the current traffic state. Surprisingly, memory is nearly sufficient on NAVSIM, reaching or even exceeding the performance of leading end-to-end methods without actually observing the evaluated scene. Our results suggest that a high NAVSIM score does not require a planner to react to the current traffic scene and should be treated with caution. This effect is benchmark-dependent: driving from memory causes substantially larger performance drops on Bench2Drive and RealEngine. We provide our code at https://github.com/boschresearch/MemoryDrivoR .

0.23

Amortized Optimization for Calibrating Stochastic Social Simulators

cs.CE cs.CY ·2026-11-04 ·Muyao Zhong, Peng Yang
similarity 0.60
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

Stochastic simulators need suitable parameter values to reproduce observed behaviour in complex systems. Searching for these values through repeated simulations makes frequent recalibration computationally expensive. We develop an amortized optimizer that uses simulations collected in advance to learn how to choose parameters that make simulated outcomes agree with observations. Once fitted, it maps new observations to feasible parameters without further simulator calls. The method retains alternative parameter settings that can explain similar observations and compares their responses, avoiding the conflicting labels that arise when training a single parameter regressor. Historical observations also provide supervision by showing which simulated responses agree with the data, even when the underlying parameters are unknown. Experiments across four simulators compare calibration accuracy and query time. Dedicated cost analyses quantify traffic preparation and the recorded financial reuse costs. On new traffic targets, local correction more than halves query time relative to empirical and surrogate selection; a learned inverse is faster still, with similar mean error. In a retrospective comparison on real financial data, our method returns parameters about $1.07\times10^{7}$ times faster than a 10-minute Gaussian-process Bayesian optimization search, with mean calibration error 3.06% higher. Reusing simulation work across observations supports repeated parameter updates when the available time is too short for a new search.

0.11