CS Paper Radar

Joint Estimation of Common-Slope Decay Rates and Spatial Amplitudes Using Parameterized Nonnegative Matrix Factorization

Jeremy B. Bai, Filip Elvander, Sebastian J. Schlecht

cs.LG eess.AS ·submitted 2026-10-04 21:20 UTC · v1
unusual

Abstract

We formulate joint estimation of common-slope decay rates and amplitudes from room impulse responses (RIRs) as parameterized nonnegative matrix factorization with the Itakura--Saito divergence as the loss function (IS-NMF). Estimation at each short-time Fourier transform frequency bin produces detailed reverberation time (RT) curves directly from RIR powers with no backward integration needed. Standard space-alternating generalized expectation-maximization (SAGE) algorithm yields closed-form amplitude updates and a convex subproblem for each decay rate update. To accelerate estimation, we introduce contribution-weighted SAGE, which emphasizes observations where each component contributes strongly to the modeled power. Experiments with synthetic data show accurate recovery of well-separated decays and faster loss reduction than standard SAGE. Application to measured coupled-room RIRs yields frequency-dependent RT curves and reveals complementary space-time contributions of the shared decay components.

Comment
5 pages, 5 figures. Submitted to ICASSP 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Joint Higher-Order Low-Rank Tensor Decompositions for Multichannel Acoustic System Compression

eess.AS ·2026-11-05 ·Matthias Blochberger, Filip Elvander, Jan Østergaard, Toon van Waterschoot
similarity 0.55
Abstract · 15 pages, 10 figures, under peer review

Multichannel room impulse responses (RIRs) in acoustics are often long and therefore the sample count becomes large if seen as finite impulse response (FIR) filters, making storage and real-time convolution costly. Pole-zero (PZ) models are an established way to represent RIRs compactly as infinite impulse response (IIR) transfer functions. We show that a PZ model implies a low-rank canonical polyadic decomposition (CPD) of tensorized RIRs: the early reflections form a sparse rank-1 sum, while the late reverberation admits a CPD with factors determined by the poles. This motivates higher-order-tensor-based compression of RIRs via the block term decomposition (BTD), a generalization of the CPD. We propose two multichannel compression schemes: (i) a stacked multichannel block term decomposition (SMCBTD) applied to a (D+1)-mode tensor of RIRs, and (ii) a joint multichannel block term decomposition (JMCBTD) that shares subsets of factors across channels discovered by spectral clustering on factor-subspace affinity graphs. Both are optimized by an alternating higher-order orthogonal iteration (HOOI) procedure. On simulated rooms as well as measured datasets, the proposed methods achieve consistently lower reconstruction error at equal compression ratios compared to separate single-channel decompositions and a generalized low-rank approximation of matrices (GLRAM) baseline. The largest gains occur with scalar cores (i.e., CPD), supporting the PZ-to-CPD modelling link. We also find D = 3 to be a practical sweet spot, offering most of the achievable gain at moderate compute/memory cost. The compressed models enable efficient downstream multichannel convolution.

0.28

Fast Time-Varying Exponentiated Convolution Methods for Generative Direction Dependent Reverberation

cs.SD eess.ASeess.SP ·2026-09-21 ·Yuancheng Luo
published similarity 0.51
Abstract · Accepted to proceedings at Audio Engineering Society Convention Nashville 2027

Spherical harmonic encoded acoustic sound-fields capture directional characteristics of room impulse responses that are useful for accurate spatial audio reproduction. However, high costs of multi-microphone measurements and numerical simulations motivate alternative data-set augmentation and synthetic data generation methods that supplement small collections. This paper introduces time-varying exponentiated convolution methods that transform both Gaussian noise and impulse responses into reverberation and modified spectral-decay fields respectively. We derive two recursive and fast convolution algorithms that extend into the spherical harmonic domain, model smooth reverberation time distributions with non-stationary Gaussian processes, and realize an optimal filter design. Experiments evaluate computational performance, and validate out-of-distribution generated impulse responses.

0.46

DAMSEP: Distance-Aware Monaural Source Separation using Multi-RIR Estimation

eess.AS ·2026-09-24 ·Wen Wen, Qiang Zhou, Yu Xi, Haoyu Li, Bohan Li +1 more
code/datahot direction similarity 0.50
Abstract · 5 pages, 1 figure, 5 tables. Submitted to ICASSP 2027. Comments updated; manuscript unchanged

Although room impulse responses (RIRs) encode source-distance cues, conventional monaural source separation focuses on recovering audio content without estimating source-specific RIRs, losing the associated spatial information. To address this limitation, we propose Distance-Aware Monaural Source Separation using Multi-RIR Estimation (DAMSEP), the first end-to-end framework that is jointly trained for source separation and multi-source RIR estimation from a single-microphone mixture. DAMSEP integrates a separation backbone with shared dereverberation and RIR estimation modules to jointly recover clean sources and source-specific complex convolutive transfer functions under source estimation and reverberant reconstruction objectives, enabling relative near/far ordering through the direct-to-reverberant ratios of the corresponding RIRs. For comprehensive evaluation, we introduce HETMIXR, which spans heterogeneous source content and diverse simulated room conditions with source-specific RIRs and geometric distance annotations. Experiments on HETMIXR demonstrate superior performance in source separation, RIR estimation, and distance ordering. Ablation studies reveal the complementary benefits of source supervision and reverberant reconstruction, while additional evaluations show generalization to single-speaker inputs and mixtures generated using measured RIRs from an unseen room. Our code and dataset are available at https://github.com/Wenanzhi/DAMSEP.

0.49

Deep Neural Compression for RIR-Characterized Acoustic Environments with Structure-Aware Constraints

eess.AS ·2026-09-03 ·Chen-Yuan Ning, Yang Ai, Hui-Peng Du, Xiao-Hang Jiang, Zhen-Hua Ling
hot direction similarity 0.49
Abstract

Room impulse responses (RIRs) characterize the acoustic environment of a room by capturing how sound propagates and decays within an enclosed space. In applications such as immersive audio rendering, accurate acoustic reconstruction often relies on spatially densely sampled RIRs. This consequently gives rise to a large volume of RIR data, imposing a substantial burden on storage. Although recent neural audio codecs provide an effective framework for low-bitrate compression, their training objectives are mainly tailored to speech and general audio, and are therefore not well aligned with the acoustic characteristics of RIRs. Therefore, we propose an EnCodec-based neural RIR compression method, which incorporates RIR structure-aware constraints at two levels. Specifically, at the RIR level, structure-aware constraints are imposed on the global decay behavior and local energy distribution of RIRs through energy decay curve (EDC) regularization and a short-time window energy constraint, while at the reverberant-speech level, reverberant-speech supervision is further introduced to constrain the consistency of the reverberant speech generated by the reconstructed RIRs. Experimental results show that, at a low bitrate of 375 bps, the proposed method achieves lower RIR reconstruction error and better reverberant-speech perceptual consistency than audio-oriented codecs.

0.36

Reverberant Speech Conditioning for Material-Aware Acoustic Parameter Mapping

cs.SD ·2026-11-09 ·Yi Wu, Olha Townsend, Qianqian Fang, Magdalena Fuentes, You Zhang
benchmark similarity 0.49
Abstract

Dense maps of room acoustic parameters (T30, EDT, C50, DRR) describe how a room sounds at every position. Scene-wide estimation predicts such maps from a floor plan but requires a reference impulse response, which is hard to obtain. Our system instead receives a floor plan and easily recorded reverberant speech from one talker-microphone pair. We compare four speech-derived conditioning inputs: MFCCs, an embedding from the blind estimator BERP, BERP's scalar reverberation-time estimate, and an impulse response reconstructed by Rec-RIR. Our main benchmark is the MRAS dataset, where material assignments vary at fixed geometry. The reconstructed impulse response performs best among the four inputs, reducing T30 error from 31.5% with the floor plan alone to 19.9%, 83% of the reduction achieved by the reference response. We find that adding speech mainly sets the overall level of the map, with little improvement in predicting how the acoustics vary across the room.

0.16

Estimation of Room Impulse Responses from Handclaps

cs.SD cs.AI ·2026-09-24 ·Shih-Yu Lai, Kyung Yun Lee, Nils Meyer-Kahlen, Eloi Moliner, Bing-Yu Chen +1 more
benchmarkdatasethot direction similarity 0.49
Abstract

Handclaps provide an equipment-free excitation for room acoustics, but their unknown and variable source waveform makes room impulse response (RIR) estimation challenging. In this work, we investigate whether RIRs can be estimated directly from handclaps. To this end, we introduce an anechoic handclap dataset containing 2,540 claps from 17 participants, designed to capture variability across natural claps and different hand configurations. We first establish the performance attainable when the excitation clap is known using regularized deconvolution, and show that approximating the unknown excitation by windowing the direct sound from the reverberant recording is insufficient. To estimate the RIR without a known excitation, we propose using the anechoic handclap recordings to train a deep neural network with a supervised regression objective. Evaluated on a controlled synthetic benchmark, the proposed neural regressor significantly outperforms windowing-based baselines across all instrumental metrics. Furthermore, we test the proposed method on handclap recordings measured in real acoustic spaces, showing that the inferred RIR spectra are consistent across different handclap measurements taken in the same room location. These results showcase the feasibility of directly estimating RIRs from natural handclaps without requiring knowledge of the excitation signal.

0.31

High-Order Sinusoidal Modeling for Precise Parameter Refinement

eess.SP eess.AS ·2026-10-15 ·Shaowen Chen, Tomoki Toda
unusual similarity 0.48
Abstract · This manuscript is currently under review for publication in the IEEE Transactions on Signal Processing. This work has been submitted to the…

Although the amplitude estimation of sinusoids is a linear and tractable problem when their frequencies are known, the accuracy of signal modeling is fundamentally limited by the inevitable frequency mismatches produced by existing methods. Quasi-harmonic modeling (QHM) and its extensions (aQHM and eaQHM) offer the ability to refine frequency estimates while extracting amplitudes; however, their extraction and correction capabilities remain limited. In this paper, we first revisit QHM methods from the perspective of frequency mismatches, and reveal that their performances are essentially constrained by the order of the model. Specifically, QHM methods are linear models and thus incapable of capturing higher-order frequency variations, leading to suboptimal modeling accuracy. Second, to address this limitation, we propose a higher-order modeling framework that enables more precise approximation of signal components. Eventually, we qualitatively characterize the optimization problem and employ the Levenberg--Marquardt (LM) algorithm for parameter estimation. As a result, the proposed method allows for significantly improved estimation of amplitudes, frequencies, and phases of sinusoidal components, enabling more accurate signal modeling. Experiments on both simulation study and speech signals demonstrate the superiority of the high-order model in frequency refinement and parameter extraction and its robustness under additive noise conditions.

0.24

Signed Wasserstein distance for room impulse response comparison

eess.AS ·2026-10-22 ·Linda Fabiani, Sebastian J. Schlecht, Filip Elvander
similarity 0.48
Abstract

The nature of room impulse response signals is often adverse to a clear evaluation of similarity: they are sparse, rapidly varying, signed signals resulting from the complex interaction of room reflections and phase relationships. Therefore, conventional point-wise metrics may be sensitive to small temporal shifts and provide poor loss surfaces for optimization. In this paper, we propose an optimal transport-based distance for RIR similarity that explicitly accounts for the structure of impulse responses, inspired by the signed Wasserstein distance formulation. Optimal transport provides a natural framework for this problem, by comparing signals based on how their underlying distributions are displaced rather than requiring a one-to-one correspondence. We evaluate the proposed distance against commonly used audio baseline metrics through a series of room-parameter perturbation studies. The results demonstrate the advantage of using the signed Wasserstein metric for geometric evaluation tasks and show a promising performance for room parameter optimization within a differentiable Image-Source model.

0.16