CS Paper Radar

D-Loop: Looped Diffusion Drafting for Speculative Decoding

Kecheng Chen, Yuyang He, Cheng Gong, Hui Liu, Guoping Long, Jiajun Li, Shi Wu, Suiyun Zhang, Haoliang Li, Ziru Liu, Rui Liu

cs.CL ·submitted 2026-10-05 09:08 UTC · v1

Abstract

Block diffusion accelerates speculative decoding by drafting multiple tokens in one forward pass. However, each position predicts a marginal distribution without observing earlier proposed tokens, limiting draft quality and acceptance length. We identify a concrete failure, the \emph{repetition trap}, in which neighboring positions produce redundant copies of the same token. We explain this tendency theoretically and empirically examine its association with shorter accepted drafts. Recent methods refine marginal predictions with an additional causal head or a separately trained drafter, increasing parameter storage and introducing separate training objectives. We instead propose D-Loop, which introduces \emph{intra-block causal conditioning} within the original diffusion drafter without additional model components. Inspired by semi-autoregressive generation and parameter sharing, D-Loop reuses the same backbone across looped passes. The first pass proposes a block, and the second conditions on a selected prefix to regenerate the suffix in parallel. A complementary prefix--suffix objective trains the shared drafter for both anchor-only prefix prediction and prefix-conditioned suffix prediction. Across eight math, code, and chat benchmarks, D-Loop can beat DFlash and DSpark on Qwen3-4B and Qwen3-8B with obvious gains.

Closest papers

Nearest neighbours by meaning across the whole index.

Multi-Draft On-Policy Distillation for Diffusion Drafters

cs.CL ·2026-10-27 ·Petr Molodyk, Yuchen Zhu, Jaemoo Choi, Molei Tao, Yongxin Chen
similarity 0.81
Abstract

Speculative decoding is used to reduce the inference cost of language models. One-step diffusion drafters propose a block of multiple tokens in parallel, reducing the sequential cost of speculative decoding. On-policy distillation trains these drafters using verifier feedback on their own proposals. However, parallel drafting makes this feedback difficult to use: the drafter predicts each token without observing the preceding tokens sampled within the same block, while the verifier conditions its prediction on those tokens. Different sampled prefixes therefore give different verifier targets for the same drafter prediction. We show that distilling against these targets separately can suppress tokens that are plausible after some prefixes but unlikely after others, harming draft acceptance. We explain the effects of this mismatch and introduce Multi-Draft On-Policy Distillation (MDraft), a new parallel drafter distillation method which samples several draft blocks from the same context and aggregates the verifier's full-vocabulary conditionals across their prefixes. We use all the drafts to collect information from the verifier, allowing support from alternative prefixes to influence the training target. The resulting algorithm improves the acceptance length of a parallel drafter beyond the level of pre-training, and alleviates the effects of the distributional mismatch. MDraft changes only training, retaining the drafter's architecture and inference procedure, allowing the resulting drafter to be used as-is in place of the pretrained checkpoint. Experiments on a suite of mathematical, coding, and conversational tasks show longer accepted drafts than prior distillation methods.

0.05

DStill: Trajectory Consistency Distillation for Accelerated One-Step Drafting in Block Diffusion Speculative Decoding

cs.CL cs.LG ·2026-10-19 ·Shreyas Kulkarni, Uttam Gurram, Madhav Kanda, Krishna Teja Chitty Venkata, Shichu Chen +3 more
similarity 0.81
Abstract

Block-diffusion speculative decoding accelerates large language model inference by drafting multiple tokens in parallel. However, one-step drafting in discrete diffusion is limited by token factorization error: each token is predicted from the same masked block, without conditioning on the tokens selected at other positions in that step. This can produce inconsistent drafts and reduce acceptance length. Iterative refinement mitigates this limitation by conditioning later predictions on previously committed tokens, though additional passes increase drafting cost. To address this trade-off between draft fidelity and inference latency, we introduce DStill, a two-stage framework that distills a target-conditioned drafter's own multi-step refinement into one-step drafting. We first train the drafter to complete partially revealed blocks, then use its refinement trajectories to train a student to predict the final completion in one pass. Using a curriculum that gradually transitions from partial to fully masked inputs, we successfully transfer the multi-step refinement capabilities into one step. Across reasoning, math, code benchmarks on three model families DStill improves acceptance length by up to 28% and speedup by up to 25% over one-step DFlash, achieving up to 6.45x speedup over auto-regressive decoding.

0.13

DEdit: Iterative Draft Editing for Speculative Decoding

cs.CL ·2026-09-29 ·Longxuan Yu, Bingsen Chen, Peng Shi, Dongkyu Lee, Yi Xiang +7 more
similarity 0.80
Abstract · 21 pages, 7 figures, 6 tables

Speculative decoding accelerates autoregressive LLMs by having a lightweight drafter propose tokens that the target model verifies in parallel. Diffusion-based drafters further reduce drafting latency by proposing multiple tokens at once. However, these tokens are predicted independently, so a single early error causes prefix verification to discard the rest of the draft, even when it contains useful downstream predictions. We introduce DEdit, a diffusion-based drafter that can not only draft by conventional parallel unmasking but also iteratively edit its draft through token-to-token predictions. Through editing, later predictions can serve as bidirectional context for repairing earlier errors and extending the accepted prefix. To teach the model to repair errors while preserving correct predictions, we propose ProposalMix, a training scheme that mixes draft predictions with ground-truth tokens based on first-pass confidence during training. Across seven benchmarks on Qwen3-4B and Qwen3-8B, DEdit achieves the highest macro-average token acceptance and speedup among the evaluated drafters, reaching macro-average speedups of $5.72\times$ and $5.97\times$ over autoregressive generation under greedy decoding, respectively. Further analysis shows that acceptance improves with more editing passes and wider drafting windows, and that ProposalMix halves harmful edits that shorten the accepted prefix. Moreover, restricting the editor to causal attention lowers acceptance, especially on highly predictable outputs, indicating that future context is a key source of these gains.

0.22

DFlow: Enabling Verifier Information Flow in Block Diffusion Speculative Decoding

cs.CL ·2026-09-06 ·Yaojie Zhang, Linfeng Zhang, Bin Cui, Xupeng Miao
highly cited similarity 0.79
Abstract

Block diffusion speculative decoding improves LLM inference efficiency by proposing a block of future tokens in parallel and verifying them with a single forward pass through the target model. However, existing methods retain only the accepted prefix and discard the rejected suffix, preventing the computation spent on these positions from benefiting subsequent drafting rounds and forcing the drafter to repeatedly reconstruct representations for future tokens from scratch. We observe that rejection only determines whether a proposed token can be committed, while the verifier representations at rejected positions can still provide useful information for subsequent predictions. Based on this observation, we propose DFlow, a simple yet effective framework that enables verifier information to flow across drafting rounds. DFlow reuses the hidden states produced by the target verifier for the rejected suffix to guide subsequent drafting without additional target computation. To effectively learn this information flow across drafting rounds, we introduce a self-condition train strategy that feeds verifier representations from earlier predictions back into subsequent predictions. Experiments on Qwen3 models across diverse benchmarks demonstrate that DFlow consistently improves draft quality and acceptance length over DFlash.

0.39

Factorization-Guided Training and Inference for Diffusion-Drafted Speculative Decoding

cs.LG cs.AI ·2026-10-07 ·Jiakun Fan, Min Xiao, Qiang Wang, Neiwen Ling, Zhichao Liu +3 more
similarity 0.77
Abstract

Speculative decoding accelerates large language model inference through parallel verification of tokens proposed by a drafter. Diffusion drafters further parallelize proposal generation, but greater proposal capacity or higher mean accepted tokens (MAT) need not yield higher throughput. Because verification accepts only a consecutive prefix, early rejections can render later correct predictions ineffective, limiting MAT gains, while even higher MAT may not improve throughput if per-round latency increases. We introduce DScout, which uses two complementary factorizations to guide diffusion drafter training and inference for higher throughput. For training, DScout factorizes position-wise loss into inclusion, weighting, and prediction loss. This guides the design and combination of mixed-horizon training, intra-block unmasking, and acceptance-weighted loss to align supervision with prefix acceptance and improve MAT. For inference, DScout factorizes throughput as the ratio of MAT to per-round latency, guiding target-conditioning depth, drafter depth, and inference block size selection to identify a high-throughput configuration for each workload. Across six benchmarks, DScout achieves $3.84\times$ and $4.14\times$ mean speedups over autoregressive decoding on Qwen3-4B and Qwen3-8B, respectively, improving mean speedup over the state-of-the-art baseline by 9.1% and 7.1%. Across models and concurrency settings, our inference configuration policy provides up to 9.75% additional mean speedup over DScout's fixed configuration.

0.14

ReTrace: Rejected-Trajectory Conditioning for Speculative Decoding

cs.CL ·2026-08-30 ·Luxi Lin, Zhanpeng Zeng, Shuang Peng, Songwei Liu, Rongrong Ji
similarity 0.76
Abstract

Speculative decoding accelerates autoregressive language model inference by having a lightweight draft model propose multiple candidate tokens, which are then verified in parallel by a larger target model. However, after the first rejection, standard prefix-based verification discards the remaining draft suffix, so the computation spent generating and verifying those positions does not contribute to decoding progress. Focusing on DFlash, we show that rejected positions in a rejected suffix may still align with the target continuation, indicating that the draft model can retain useful semantic and structural information despite local token-level errors. Motivated by this observation and inspired by conditional diffusion, we introduce ReTrace, a rejected-trajectory conditioning method that conditions each draft block on the rejected suffix from the previous round rather than generating it from fresh mask placeholders alone. ReTrace retains the hidden representations of the rejected suffixes, aligns them with the next draft block, refines them using target-aware correction signals from the same verification pass, and admits them into the drafter's input embeddings through gated residual fusion. Because rejected tokens are never committed and target-side verification remains unchanged, ReTrace preserves the lossless property of speculative decoding without requiring an additional model forward pass. Experiments with Qwen3 models across mathematical reasoning, code generation, and open-ended dialogue demonstrate that ReTrace consistently improves average acceptance length and end-to-end decoding speed over its DFlash backbone. By introducing cross-round conditioning without modifying within-round proposal generation, ReTrace is largely orthogonal to existing drafting improvements and might be combined with them for further gains.

0.41

Contextual Correction of Parallel Drafts for Speculative Decoding

cs.CL ·2026-10-08 ·Roy Eisenstadt, Harel Lidar, Tal Gonen, Omer Luxembourg, Itamar Zimerman +3 more
similarity 0.75
Abstract

Speculative decoding accelerates large language model inference by using a lightweight drafter to propose multiple tokens that are subsequently verified in parallel by the target model. Recent diffusion-based drafters make this paradigm particularly attractive: deep attention-based neural backbones provide strong predictions, while drafting multiple future positions in parallel avoids the sequential cost of autoregressive generation. This parallelism, however, comes at a cost. Tokens within a draft block are predicted without access to the realized identities of preceding draft tokens, removing intra-block dependencies that would naturally be available under autoregressive generation. We introduce DCOCO (DFlash Contextual Corrector), a lightweight mechanism that restores these dependencies while preserving parallel drafting. Rather than committing to each position's top prediction, DCOCO retains multiple candidate tokens and evaluates their contextual compatibility across adjacent draft positions in parallel, enabling contextually informed token selection at low additional cost. Across four verifier backbones and ten benchmarks, DCOCO achieves the highest average throughput in every evaluated configuration, spanning greedy and stochastic decoding with and without extended reasoning, with speedups of up to 6.6x over vanilla decoding. Its advantage persists under concurrent serving: DCOCO outperforms the strongest competing method by 6-23% across 4-32 concurrent requests, while other sequential correctors fall below uncorrected DFlash at these loads. These results demonstrate that recovering intra-block dependencies through parallel contextual scoring delivers consistent acceleration across decoding regimes and serving loads.

0.37

From Positionwise Confidence to Prefix Scheduling: Verifier Skipping in Speculative Decoding

cs.CR cs.CL ·2026-08-14 ·Haoxuan Luo, Jameson Sandler, Ferdinando Fioretto
published similarity 0.75
Abstract · Accepted at UncertaiNLP 2026 (non-archival). 14 pages, 6 figures

Speculative decoding is a leading technique to reduce the cost of autoregressive generation by using a small drafter to propose several tokens, which are then verified in parallel by a larger target model. Speculative diffusion decoding (SDD) further removes sequential drafting by generating every position in a draft block in parallel with a discrete diffusion model. However, SDD still invokes the target on every block, leaving verification as a potential bottleneck. This paper recognizes that this creates a new control handle: whether to invoke the verifier at all. Thus, we study verifier skipping, a lossy policy that commits a selected draft prefix directly, and ask which confidence signal should schedule it. Interestingly, our study finds that better token predictors need not yield better schedulers: skips require contiguous high-confidence prefixes, while short skips can induce additional drafting rounds. To study this mismatch, we compare raw confidence with learned marginal and conditional survival scores under the same policy, using Strict SDD, lenience, and top-$k$ acceptance as baselines. On HumanEval with DiffuCoder-7B-Instruct and Qwen3-32B, all three confidence signals save $9.6\%$ to $13.5\%$ of verifier calls at the same observed pass@1 as Strict SDD. Surprisingly, raw confidence saves the most; marginal survival has higher positionwise AUROC than raw confidence at most positions, yet neither learned signal dominates online. Our analysis shows that verifier skipping is a useful new lossy axis and, surprisingly, its key challenge is prefix scheduling rather than token prediction alone.

0.25