CS Paper Radar

Improved Sublinear Algorithms for Maximal Independent Set and Metric Steiner Forest

Sepideh Mahabadi, Jakub Tarnawski

cs.DS ·submitted 2026-10-05 09:47 UTC · v1

Abstract

In this work we consider the Maximal Independent Set (MIS) problem and the metric Steiner Forest problem in the sublinear time setting, under the adjacency/distance matrix query model. First, we give an algorithm that estimates the size of an MIS up to a multiplicative factor of $(1+\eps)$ using $\tO(n^{4/3}/\eps^2)$ queries. This improves the best previous algorithm by Mahabadi, Roghani, Tarnawski, and Vakilian (SODA 2026), which had a query complexity of $\tO(n^{3/2}/\eps^2)$. Via a reduction from that work, this would automatically imply the same improvement for the problem of estimating the metric Steiner Forest cost up to an $O(\log n)$ factor. However, as our second contribution, we consider the Steiner Forest problem directly and provide an algorithm with $\tO(n)$ query complexity that is very simple and does not proceed via MIS.

Closest papers

Nearest neighbours by meaning across the whole index.

Faster Sublinear Maximal Independent Set Size

cs.DS ·2026-10-02 ·Peter Kiss, Arash Kooroshnezhad
similarity 0.81
Abstract

We give a sublinear-time algorithm for estimating the size of a maximal independent set in a graph using adjacency-query access with expected running time $\tilde{O}(n^{1+1/3})$, improving over the previous $\tilde{O}(n^{1+1/2})$ bound of Mahadabi et al. [MRTV26]. As a consequence of a reduction of [MRTV26], this also improves the running time for sublinear metric Steiner forest. We further show that a bi-criteria estimate of the $k$-center objective in general metrics can be obtained via a reduction to maximal independent set size estimation.

0.41

Tight Bounds for Sublinear Metric Steiner Tree

cs.DS ·2026-11-09 ·Sepideh Mahabadi, Mohammad Roghani, Jakub Tarnawski, Ali Vakilian
theory similarity 0.80
Abstract

In the metric Steiner tree problem we are given an $n$-point metric space $(V,w)$ and a set $T\subseteq V$ of terminals, and we seek the smallest weight $\mathrm{OPT}$ of a tree that spans $T$ and may use points of $V\setminus T$. We study sublinear algorithms in the distance-oracle model, where the algorithm knows $V$ and $T$ upfront and can query the distance function $w$. The objective is to estimate $\mathrm{OPT}$ while querying significantly fewer than $n^2$ distances. The minimum spanning tree on $T$ estimates $\mathrm{OPT}$ within a factor $2$, and its weight can be approximated with $\widetilde{O}(n)$ queries. The natural question that has been studied is therefore the query complexity of estimating $\mathrm{OPT}$ within a factor strictly below $2$. Chen, Khanna, and Tan [SODA 2023] gave such an algorithm using $\widetilde{O}(n^{13/7})$ queries, and a lower bound of $\widetildeΩ(n^{6/5})$. Later Mahabadi, Roghani, Tarnawski, and Vakilian [ITCS 2025] improved the algorithm to $\widetilde{O}(n^{5/3})$, and Mahabadi, Tarnawski, and Vakilian [ITCS 2027] improved the lower bound to $\widetildeΩ(n^{7/5})$. In this work we settle the above question. We give an algorithm that estimates $\mathrm{OPT}$ within a factor $2-η_0$, for an absolute constant $η_0>0$, with query (and time) complexity $\widetilde{O}(n^{3/2})$. We also show that the exponent $3/2$ is tight.

0.12

A Better Lower Bound for Sublinear Metric Steiner Tree

cs.DS ·2026-10-30 ·Sepideh Mahabadi, Jakub Tarnawski, Ali Vakilian
theory similarity 0.77
Abstract

In the metric Steiner tree problem, we are given an $n$-point metric space $(V,w)$ and a set of terminals $T\subseteq V$, and we are interested in the smallest total weight $\mathsf{st}(V,T,w)$ of a tree that contains every terminal and may also use points of $V\setminus T$. We work in the distance-oracle model: the algorithm knows $V$ and $T$ in advance and learns $w$ only by querying a single entry $w(u,v)$ at a time. The goal is to estimate $\mathsf{st}(V,T,w)$ with the minimum number of queries. A factor of $2$ is achievable with nearly linear number of queries, so the interesting question is the query complexity of algorithms with an approximation ratio strictly below $2$. We prove that for every fixed $η\in(0,1)$, every randomized $(2-η)$-approximation algorithm must make more than $\widetildeΩ(n^{7/5})$ queries, improving upon the previously known bound of $\widetildeΩ(n^{6/5})$. Given that the best known upper bound shows that $\widetilde O(n^{5/3})$ queries suffice, the exponent of this problem now lies between $7/5$ and $5/3$, up to logarithmic factors.

0.20

An $n^{0.3+\varepsilon}$-Approximation for Steiner $k$-Forest

cs.DS ·2026-10-07 ·Eden Chlamtáč
similarity 0.77
Abstract

We give an $n^{0.3+\varepsilon}$-approximation algorithm for the Steiner $k$-Forest problem, for any constant $\varepsilon>0$. As a function of $n$, this improves over the $O(\min\{\sqrt{n},\sqrt{k}\})$-approximation of Gupta et al. [ESA'07, TALG'10] which has stood for nearly two decades for the general case, as well as the later $n^{0.448}$-approximation of Dinitz et. al [APPROX-RANDOM'14, TALG'17] for the uniform weight case. On the other hand, we show that, due to lower bounds on the Densest $k$-Subgraph problem, the $O(\sqrt k)$-approximation for Steiner $k$-Forest likely cannot be improved. Specifically, we show that for any sufficiently small $\varepsilon>0$, an $O(k^{1/2-\varepsilon})$-approximation for Steiner $k$-Forest would surpass known degree-$n^{Ω(\varepsilon^2)}$ Sum-of-Squares integrality gaps for Densest k-Subgraph and refute the corresponding dense-versus-random conjecture.

0.20

Nearly Optimal Sparse Navigable Graphs in General Metrics

cs.DS ·2026-10-29 ·Hongyi Chen, Tianyi Zhang
similarity 0.70
Abstract · 24 pages, 3 figures

We study approximation algorithms for constructing sparse navigable graphs in general metrics. Given an $n$-point metric $(P,d)$ and a parameter $α\ge1$, a directed graph on $P$ is $α$-navigable if, for every pair of distinct points $s,t\in P$, the source $s$ has an outgoing neighbor $p$ with $d(p,t)<d(s,t)/α$. The objective is to minimize the number of edges. Recent independent works of Khanna, Padaki, and Waingarten (2026) and Conway et al. (2026) give $O(\log n)$-approximation algorithms and show that an $o(\log n)$ approximation is NP-hard in general. Before our work, the best known running time for such an approximation for general $α\ge1$ was $\widetilde O(\min\{n\operatorname{OPT}_α,n^{2.5}\})$, where $\operatorname{OPT}_α$ is the minimum number of edges in an $α$-navigable graph. In this paper, we give a randomized algorithm that, with high probability, runs in $\widetilde O(n^2)$ time and achieves an $O(\log n)$ approximation for every $α\ge1$. In general, these guarantees are nearly optimal up to constant factors in the approximation and polylogarithmic factors in the running time.

0.20

Connectivity Oracles Under Vertex Failures via a Simple and Fast Low-Degree Steiner Forest Decomposition

cs.DS ·2026-09-02 ·Sayan Bhattacharya, Ermiya Farokhnejad, Thatchaphol Saranurak, Haoze Wang
theory similarity 0.69
Abstract

We study the low-degree Steiner forest decomposition. Given a graph $G=(V,E)$ and a terminal set $U\subseteq V$, the standard decomposition returns a set $X\subseteq V$ of size at most $|U|/2$ and a forest $T\subseteq G-X$ of maximum degree $Δ$ such that, for every connected component $C$ of $G-X$, some connected component of $T$ contains all terminals in $U\cap V(C)$. This is the central decomposition behind several connectivity oracles under vertex failures [DP20, LS22, LW24]. The state-of-the-art algorithms either take $O(mn\log n)$ time with degree bound $4$ [DP20], or take $m^{1+o(1)}$ time with the weaker degree bound $O(\log^{2}n)$ [LW24]. We show that if $T$ is allowed to contain vertices of $X$, then a degree-$4$ decomposition can be computed by a very simple algorithm in $O(mα(n))$ time. Further, we show that this relaxed decomposition is equally useful for constructing connectivity oracles under vertex failures. As a consequence, we obtain a deterministic connectivity oracle under $d$ vertex failures with $\tilde{O}(m)$ space, $\tilde{O}(md_\star)$ preprocessing time ($d_\star$ is an upper bound on the number of failed vertices), $\tilde{O}(d^{2})$ update time, and $O(d)$ query time. Up to polylogarithmic factors, this oracle strictly improves all known oracles; in particular, it removes the $n^{o(1)}$ factors from the preprocessing and update times of [LS22, LW24].

0.24

Query Complexity of Densest Sub(hyper)graph Problems

cs.DS cs.CC ·2026-10-13 ·Sinan G. Aksoy, Eli Friedman, Nate Veldt, Stephen J. Young
theory similarity 0.69
Abstract · 26 pages

Rubinstein et al. introduce the study of connectivity and minimum cut problems in the cut query model, where an algorithm can only access the edges of a graph through CUT queries. In this work, we examine the query complexity of densest subgraph problems. Our first contribution is to generalize the uniform sparsification approach for Densest Subgraph and other heavy subgraph problems to weighted graphs, achieving the following results. >A $(1+\varepsilon)$-approximation for weighted Densest Subgraph in $O(n\log^2 n/\varepsilon^2)$ queries, roughly matching the $Ω(n/\log n)$ lower bound we prove for randomized algorithms. >A $(1+\varepsilon)$-approximation for weighted Max Cut in $O(n\log^2 n/\varepsilon^2)$ queries. This improves upon the bound of $O(n\log^3 n(\log n+1/\varepsilon^2))$ queries achieved by Plevrakis et al., making significant progress towards their lower bound of $Ω(n/\log n)$ queries. In contrast, we rule out approximation schemes with truly subquadratic query complexity for Densest $k$-Subgraph and settle its exact query complexity in both the unweighted and deterministic settings. For hypergraphs, we show CUT queries alone cannot achieve $o(\sqrt{n})$-approximation for Densest Subhypergraph or $o(n)$-approximation for Densest $k$-Subhypergraph, regardless of the number of queries. Augmenting CUT queries with the EDGE oracle of Chen et al., we overcome this barrier for Densest Subhypergraph and obtain a $(1+\varepsilon)$-approximation on rank-$r$ hypergraphs using $O(nr\log n/\varepsilon^2)$ queries. We also extend our Densest $k$-Subgraph hardness results to hypergraphs and prove exponential query lower bounds for exact Densest $k$-Subhypergraph. Lastly, confirming a conjecture of Chakrabarty and Liao, we show that simulating an ADD query using CUT and IS-EDGE$^?$ queries requires exponentially-many queries.

0.24

Dynamic Steiner Tree under Edge Updates

cs.DS ·2026-11-03 ·Jeff Giliberti, MohammadTaghi Hajiaghayi, Mohammad Mahdavi, Xinchen Yang
hot direction similarity 0.68
Abstract

The Steiner tree problem is the canonical generalization of minimum spanning tree (MST). When connectivity is required only among a fixed subset of vertices (terminals), the goal is to maintain a minimum-cost tree connecting these terminals as the graph undergoes edge updates. While dynamic MST has been studied since the 1980s~[Frederickson, STOC'83, SICOMP'85], and the first sublinear-in-$n$ dynamic MST algorithm dates back almost thirty-five years to Eppstein, Galil, Italiano, and Nissenzweig~[FOCS'92, JACM'97], achieving sublinear-in-$n$ update time for dynamic Steiner tree has long remained open, as a single edge update can invalidate many routes in the underlying terminal metric closure. We present the first fully dynamic algorithm for Steiner tree that achieves a constant-factor approximation with sublinear-in-$n$ update time. For any fixed $0<ζ<1/2$, our deterministic algorithm maintains an $O_ζ(1)$-approximate Steiner tree for undirected graphs with polynomially bounded edge weights in $\widetilde O(n^{1/2+ζ})$ amortized update time, answering cost queries in $O(1)$ time, and reporting an explicit tree in $\widetilde O(n^{1+ζ})$ time. Our approach combines periodic terminal-metric rebuilds on a dynamic spanner with a top-tree dynamic program that localizes edge deletions and reconnects surviving components through a dynamic distance sparsifier. Along the way, we give a simpler randomized insertion-only algorithm with a better, explicit approximation ratio.

0.25