CS Paper Radar

FluidPD: In-Place Elasticity for SLO-Aware Prefill-Decode Disaggregated LLM Serving

Kartik Ramesh, Kaidi Fu, Zihan Zheng, Jiahuan Yu, Fabio Oliveira, Carlos Costa, Minjia Zhang

cs.AI ·submitted 2026-10-02 18:49 UTC · v1

Abstract

Prefill-decode disaggregation is becoming a common architecture for LLM serving because it separates two phases with distinct execution patterns and SLO objectives. Existing systems typically combine a fixed prefill/decode worker ratio with request routing across workers. However, real-world workloads exhibit both short bursts and sustained shifts in the prefill-to-decode demand ratio. As a result, a configuration that is well provisioned at one time may quickly become mismatched, causing latency SLO violations even when idle capacity exists elsewhere. Existing autoscaling mechanisms can add capacity, but they react slowly, require spare GPUs, and do not directly address short-timescale phase imbalance. We present FluidPD, a P/D-disaggregated serving system that provides SLO-aware in-place elasticity. FluidPD introduces two complementary mechanisms. FluidToken handles transient imbalance by offloading a bounded portion of prefill computation to decode workers when decode-side slack is available. FluidRole handles sustained imbalance by reassigning running workers between prefill and decode roles in place, avoiding model reload and engine restart. Both mechanisms are guided by lightweight pressure indices that expose prefill and decode-side resource pressure before they appear as SLO violations. Across production Azure trace workloads, FluidPD improves overall SLO attainment over static SGLang by up to 94.6 percentage points, demonstrating that SLO-aware in-place P/D elasticity improves service quality without provisioning additional workers.

Comment
13 pages, 11 figures

Closest papers

Nearest neighbours by meaning across the whole index.

P-PAS: Prefill-Pressure Adaptive Scheduling for Long-Context LLM Serving

cs.DC ·2026-08-15 ·Timo Sämann
code/data similarity 0.72
Abstract

Long-context LLM applications such as retrieval-augmented generation (RAG) and agentic systems often process tens of thousands of input tokens to produce short outputs, making end-to-end request latency an important serving objective. We show that the maximum number of batched tokens (MBT), which controls the token scheduling budget in vLLM, has a scheduling-pressure-dependent effect on latency. Larger token budgets can reduce latency under low scheduling pressure, while smaller budgets become preferable under higher pressure. Consequently, no single static MBT performs best across load regimes. We introduce Prefill-Pressure Adaptive Scheduling (P-PAS), a lightweight policy that dynamically adapts the global scheduling budget using concurrent prefill and decode state. P-PAS retains a large token budget under low pressure and switches to a smaller budget when multiple prefills compete with active decoding. Across models, workload configurations, and GPUs, P-PAS maintains low end-to-end latency across changing load regimes. Kernel-level profiling shows that the crossover arises from a trade-off between large-chunk prefill efficiency and prefill--decode interference. We further extend the pressure signal to heterogeneous request shapes with P-PAS+. On mixed-shape workloads using Qwen3.8-27B and Nemotron-3.5-Lightning-30B-A3B, P-PAS+ reduces mean end-to-end latency by 3.0--3.1% relative to the best tested static token budget. Across exactly matched logical requests, 91.2% of Qwen requests and 88.5% of Nemotron requests complete faster with P-PAS+. Code and artifacts are available at https://github.com/TimoSaemann/ppas-vllm .

0.24

Crossflow: Prefill-Decode Elasticity for Agentic LLM Serving

cs.DC cs.AIcs.LG ·2026-09-22 ·Yi Xu, Ehsan K. Ardestani, Wenyin Fu, Martin Schatz, Krishna Malladi +5 more
similarity 0.71
Abstract

As serving capacity demand surpasses that of training, serving efficiency becomes increasingly important. Prefill-decode (P/D) disaggregation improves serving efficiency through specialization and isolation of the two phases. These benefits rest on a static partitioning. Phase demand, however, is not static. We observe that in a large LLM fleet the ratio of uncached input to output tokens has peak-to-mean ratios up to 4.7x at minute timescales, and that in a public agentic trace the hourly ratio spans a median 24.5x within a single day, while reassigning a replica takes tens of minutes. Agentic traffic sharpens the mismatch. Sizing each pool at its ninety-fifth percentile leaves up to 17% of cluster capacity unused; sizing below it converts the same imbalance into queueing and unrealized throughput. We present Crossflow, which makes this boundary elastic without changing node roles. Each decode node publishes a short-lived, revocable lease that bounds local-prefill compute, KV capacity, transfer work, and projected output. Across public and internal traces, Crossflow improves token throughput by 16.2-17.4% on geometric mean over static P/D, and by up to 43.4% at high load, while reducing mean TTFT at every evaluated point.

0.46

Balancing Workload Performance and Slurm Stress: Four Nextflow Deployment Strategies

cs.DC ·2026-08-13 ·Nil Tianchen Mu, William Dizon, Glen Otero, Torey Battelle
benchmark similarity 0.68
Abstract

Wide Nextflow fan-outs on shared Slurm clusters can submit tens of thousands of short tasks. Deployment settings route them through individual jobs, arrays, or nested schedulers inside enclosing allocations. These settings determine workflow turnaround and RPC volume, a shared cost that can degrade scheduler responsiveness. Existing comparisons evaluate whole workflow systems, while per-task queueing metrics cannot span architectures that dispatch inside existing allocations. We contribute a reproducible measurement protocol and benchmark harness. A clean-start clock begins before backend startup or allocation requests, placing architecturally different backends on a common time axis. Per-user Slurm sdiag counters attribute request count as the primary RPC demand measure and controller processing time as sensitivity context, separate from cluster-wide state. We apply the method to Slurm native dispatch, Slurm job arrays, HyperQueue, and Flux on the shared ASU Phoenix production cluster and a single-user Dev cluster. On Phoenix, every aggregation strategy improves both objectives relative to native dispatch; Flux has the lowest RPC demand, while HyperQueue's fastest median walltime is not stable across replicates. On Dev, arrays and Flux improve walltime, while HyperQueue trades the lowest RPC demand for the slowest completion. The method lets an HPC site compare deployment strategies using both user-visible performance and scheduler impact, then select the fastest strategy within its own RPC-demand limit.

0.04

VelServe: Taming Decode Jitters in LLM Inference with Tail-Calibrated Scheduling

cs.AI ·2026-11-13 ·Ishaan Datta, Alind Khare, Koushik Kumar Dey, Ratnesh Jamidar, Anand Kumar Singh
similarity 0.68
Abstract

Interactive LLM services must meet latency service-level objectives (SLOs) for the time to first token (TTFT) and the time between tokens (TBT), as streaming and soft real-time applications require predictable token delivery. We identify decode jitters in both aggregated and disaggregated serving. A jitter delays every request in the batch, and long responses span hundreds of steps, so even rare overruns cause many SLO violations. In aggregated serving, SLO-aware schedulers set each step's prefill budget until its predicted latency just meets the TBT target, leaving no room for mispredictions or host stalls. Disaggregation meets average TBT targets at a cost in capacity, yet the steps that admit new requests still run late. We present \sysname, a scheduler that calibrates how much prefill work each decode step carries using the measured tail of its own iteration latency. The SLO determines how rare a late step must be, and \sysname leaves enough headroom in each iteration to prevent overruns and meet the target decode latency. This headroom slows prefill, so \sysname serves the shortest waiting prompt first. When TTFT deadlines grow with prompt length, the long prompts it delays have the most time to spare. Under disaggregation, it spaces admissions so that no request waits on more slow admission steps than its P99 target allows. On three attention families and varying workloads, \sysname sustains 2.4--2.9$\times$ the SLO goodput of the strongest baseline on Qwen3-8B and DeepSeek-V4-Flash, and at least 4.4$\times$ on DeepSeek-V2-Lite. With prefill and decode disaggregated on eight GPUs, \sysname meets the SLO for more than twice as many requests as state-of-the-art baselines.

0.23

PackServe: SLO-Aware Request Scheduling for Agentic LLM Serving at Scale

cs.DC ·2026-09-27 ·Zhiyuan Tan, Dejiang Zhu, Jingzhe Jiang, Yihao Zheng, Yang Tian +2 more
similarity 0.68
Abstract · 13 pages, 13 figures

Request scheduling is a key challenge in large-scale clusters serving agentic large language model (LLM) workloads. An effective scheduler must preserve key-value cache (KVC) reuse across long, shared prefixes, meet token-level latency service-level objectives (SLOs), and minimize GPU resource footprint. Existing schedulers struggle to reconcile these requirements: request consolidation can sacrifice cache locality and increase prefill/decode interference, compromising both SLO attainment and resource efficiency. We present PackServe, a scheduler designed to reduce resource costs while meeting latency SLOs for agentic LLM serving. PackServe uses compact white-box models to predict latency under prefill/decode interference. Guided by these predictions, it packs requests onto fewer serving instances while preserving KVC reuse and SLO constraints, trading available latency headroom for improved per-instance throughput. Evaluation on 64 NVIDIA H20 GPUs shows that PackServe uses up to 16.8% and 24.6% fewer GPU-hours than state-of-the-art schedulers under 30-ms and 50-ms TPOT targets, respectively, while meeting the target TPOT objectives. PackServe has also been deployed in our production cluster comprising over 1000 GPUs, where it reduces the resource footprint by 34.7% compared with the original production scheduler.

0.21

Evolving Infra: Agent-Adaptive LLM Serving at Scale

cs.DC ·2026-11-09 ·Hao Kang, Weili Xu, Ziyang Li, Zheng Du, Hanchen Li +6 more
code/data similarity 0.68
Abstract · We just modify some intro and add link to the previou paper

Agentic workloads are a major source of LLM inference demand. Existing prefill--decode (PD) disaggregated serving systems offer limited flexibility for runtime adaptation of compute allocation and KV cache management, and rely on coarse signals that only partly capture the diverse and dynamic agent workload. These limitations lead to load imbalance between prefill and decode nodes and eviction of KV caches that agents will reuse. We present Evolving Infra, an agent-adaptive serving framework that adapts compute allocation to agent workloads and KV cache management to agent context management at runtime. We decouple compute allocation from key--value (KV) cache management, allowing nodes to switch efficiently between prefill and decode. Building on this design, an online planner matches the PD split to workload composition, while an agent-aware distributed KV manager guides cache eviction and transfer with signals from agent context management. Across coding, math, and computer-use tasks with GLM-5.2 and Kimi K2.6 on up to 256 GB300 GPUs, Evolving Infra reduces mean end-to-end request latency and P95 TTFT by up to 4.1x and 14x over Dynamo, NVIDIA's production framework. We open-source the system implementation of Evolving Infra at https://github.com/mit-han-lab/EvolvingInfra.

0.19

ConfluxServe: Reconciling Resource Utilization and Parallelism Efficiency across Prefill and Decode in LLM Serving

cs.DC ·2026-10-27 ·Wenhao Chen, Hong Zhang
similarity 0.67
Abstract · 20 pages, 18 figures

Prefill and decode are complementary in resource usage, but often divergent in parallelism preferences. Executing the two phases separately preserves their preferred parallelism but leaves complementary resources underutilized, while co-batching improves utilization but often requires a uniform parallel configuration that hurts execution efficiency. To resolve this utilization-efficiency dilemma, we propose Conflux Parallelism (XP), a parallel execution abstraction that co-executes prefill and decode with different parallelism within the same batch. Conflux Parallelism exploits operator-level Transformer structure to construct a heterogeneous execution path with different batching and parallelism strategies across operators, combining the best of co-batching and phase-specific execution. Building on Conflux Parallelism, we design ConfluxServe, an SLO-aware serving system that maximizes cluster goodput under TTFT and TBT constraints. Evaluation on production workloads shows that ConfluxServe improves serving goodput by 1.26-1.62x over the strongest baselines.

0.26

OpScale: Operator-level Provisioning and Autoscaling for LLM Serving

cs.DC ·2026-08-13 ·Xingqi Cui, Chieh-Jan Mike Liang, Ziang Tang, Jiarong Xing, Haoran Qiu
similarity 0.67
Abstract · 22 pages, 29 figures

Achieving cost efficiency while meeting strict user-facing SLOs (e.g., time-to-first-token) remains a fundamental challenge for cloud GPU clusters serving large language models (LLMs). Autoscaling is the key mechanism for cluster resource management, yet a basic system design question is open for serving LLMs: what should be the unit of scaling? Existing approaches primarily treat the entire model as a monolithic scaling unit--simple but unable to capture the fine-grained dynamics of inference workloads. As a result, such coarse-grained scaling often leads to either SLO violations under bursty demand or significant GPU under-utilization. Our characterization reveals substantial operator heterogeneity, exposing operator-level elasticity as a viable scaling primitive. We present OpScale, a practical operator-level orchestration framework of profiling, provisioning, placement, and runtime serving. OpScale is designed to tackle the high complexity and the space explosion problem, arising from operating at this finer granularity. Evaluated with production traces on up to 40 A100s and 24 GB200s, OpScale attains SLOs with up to 36.3% fewer GPUs and 28% less power, or achieves 44% higher throughput under fixed cost budgets.

0.10