CS Paper Radar

Activation Denoising: A Robustness View on Parallel vs Sequential LLM Quantization

Yan Scholten, Rachel Lawrence, James Hensman, Stephan Günnemann, Alicia Curth, Riccardo Grazzi

cs.LG ·submitted 2026-10-05 23:41 UTC · v1

Abstract

Post-training quantization is a powerful tool for compressing large language models. The most scalable methods quantize every layer in parallel, but quantization errors then compound through the residual stream, as no layer corrects for the errors of the layers before it. Sequential quantization accounts for this error compounding by re-calibrating each layer on the already-quantized outputs of its predecessors, yielding stronger results but at the cost of a serial schedule that becomes a bottleneck at scale. As a solution, we propose parallel quantization with activation denoising, which recovers much of the sequential benefit while keeping quantization fully parallel. Rather than re-calibrating layer-by-layer, we take a robustness perspective and model the upstream error as noise, regularizing to be robust to it through a preprocessing step followed by metric-weighted rounding. Applied at every layer, this regularization forms a depth-compounding smoothness penalty that dampens how strongly quantization errors amplify through the model. Unlike orthogonal rotations commonly used in quantization, which must preserve the model's function, we multiply the weights by a more general linear transformation. We find that the two are complementary and their effects compound. Empirically, our robustness regularization recovers a significant part of sequential quantization's benefit in a single parallel pass, at a fraction of its time. Overall, by treating compounding quantization errors as a robustness problem, we offer a principled foundation for more efficient and accurate LLM quantization at scale.

Closest papers

Nearest neighbours by meaning across the whole index.

When Lower Reconstruction Loss Hurts: Distributionally Robust Refinement for Low-Bit LLM Quantization

cs.AI cs.LGstat.ML ·2026-10-08 ·Yanlong Zhao, Xiaoyuan Cheng, Huihang Liu, Baihua He, Xinyu Zhang +4 more
similarity 0.74
Abstract

Weight-only post-training quantization (PTQ) relies heavily on reconstruction loss minimization to preserve model quality at low precision. We show that the weights favored by minimizing this loss need not yield better model performance on new tasks. In fact, we find that lower reconstruction loss can even degrade model performance on the same calibration data. Our analysis further shows that weights with lower reconstruction loss on calibration data can have higher loss than other weights when the distribution of input activations changes. Motivated by these observations and our analysis, we propose Distributionally Robust Quantization (DRQ), a post-hoc refinement process that minimizes worst-case reconstruction loss over a constrained set of input activation distributions. DRQ refines the integer codes representing quantized weights within the existing quantization grid, keeping quantization parameters and inference operators unchanged. Extensive experiments show that DRQ improves models quantized by six representative PTQ methods, including AWQ, GPTQ, and ParoQuant, and delivers gains across both dense and mixture-of-experts large language models. These results establish DRQ as a general post-hoc refinement framework for weight-only PTQ, achieving better downstream performance without adding inference overhead.

0.17

Activation Outliers Matter: Robust Recovery for Quantized Multimodal LLMs

cs.LG ·2026-08-27 ·Tanzila Rahman, Mehran Taghian Jazi, Yunke Peng, Zhuang Ma, Anandharaju Durai Raju +8 more
similarity 0.74
Abstract · 14 Pages, 5 figures, 5 tables

Low-bit quantization offers a promising avenue for reducing the computational and memory demands of Multimodal Large Language Models (MLLMs). Recent hardware support for low-precision formats, ranging from MXFP8 to ultra-low-bit formats such as MXFP4 and HiF4, has accelerated research into efficient MLLM training and deployment. In this work, we present a systematic study of these quantization schemes in representative MLLMs that span both video generation and reasoning tasks. Our analysis shows that MXFP8 achieves near-lossless performance, whereas aggressive 4-bit quantization leads to significant degradation. Through extensive ablations, we identify activation quantization as the primary source of this performance loss, contributing substantially more than weight quantization. Motivated by this observation, we propose Residual Fallback Quantization (RFQ), a lightweight activation reconstruction framework that supplements the primary ulta-low-bit activation representation with an auxiliary quantized residual pathway. By explicitly modeling and compensating for quantization errors, RFQ improves activation fidelity while preserving the efficiency advantages of ultra-low-bit computation. RFQ requires no architectural modifications and incurs negligible computational overhead. Extensive experiments on Wan2.2 and Qwen3-VL demonstrate that RFQ consistently recovers a substantial portion of the performance lost under the quantization of MXFP4 and HiF4, significantly narrowing the gap to BF16 baselines across both generation and 4 reasoning benchmarks. Our findings establish activation quantization as the dominant bottleneck in ultra-low-bit MLLMs and highlight residual-based activation reconstruction as an effective and practical strategy for robust 4-bit deployment.

0.27

SoloQ: Calibration-Free Quantization for Diffusion Language Models

cs.LG ·2026-10-05 ·Donghyun Lee, Arkapravo Ghosh, Varun Manjunath, Bumjoon Kyle Rhee, Hyunho Kook +3 more
similarity 0.74
Abstract

Diffusion large language models dLLMs) have emerged as a promising alternative to autoregressive language models through bidirectional diffusion-based token generation. However, their growing model sizes and high inference costs make efficient deployment challenging: full-sequence denoising repeatedly invokes compute-intensive forward passes, while block-diffusion models additionally introduce a memory-intensive KV-cache. Low-bit weight-activation quantization is therefore attractive, yet existing dLLM post-training quantization methods rely on calibration data despite activation distributions shifting across masking states and denoising steps. We present SoloQ, a calibration-free quantization framework that maps weights and activations into a normalized rotated basis with a predictable marginal distribution, enabling data-independent quantization. SoloQ combines a structured K-RPBH rotation with a lightweight rescaling correction for calibration-free quantization. Its predictable post-rotation distribution supports both distribution-matched codebooks and hardware-native NVFP4. For block-diffusion models, SoloQ further applies commit-time KV-cache quantization to compress persistent states without perturbing the actively denoised block. Across full-sequence dLLMs (LLaDA and Dream) and block-diffusion dLLMs(Fast-dLLM v2 and Nemotron-Labs-Diffusion), SoloQ retains accuracy under 4-bit quantization and outperforms calibration-based baselines on knowledge- and reasoning-intensive benchmarks. With NVFP4, SoloQ reduces peak memory by up to 2.61X and accelerates end-to-end inference by up to 2.24X.

0.20

Trainable Vector Quantization for Large Language Models

cs.LG ·2026-10-30 ·Anastasiia Prutianova, Alina Bogdanova, Mikhail Shutov, Dmitrii Poimanov, Anatoly Gorkov +1 more
published similarity 0.72
Abstract · ECML PKDD 2026, Research Track

Vector Quantization (VQ) is a rapidly evolving technique for compressing Large Language Model (LLM) weights, reducing memory usage, and speeding up inference. However, extreme compression deteriorates model performance, which is challenging to recover due to the discrete nature of VQ parameters. Existing methods employ training-free approaches that are limited to layer-wise reconstruction loss minimization. To address this limitation, we propose TVQ, a novel method that leverages straight-through estimation to enable gradient descent-based optimization of vector-quantized LLMs. By reformulating VQ LLM optimization with trainable latent weights, TVQ enables arbitrary objective minimization. We constitute our approach by applying TVQ in a block-wise knowledge distillation paradigm, which balances quality and training efficiency, and propose several practical solutions to accelerate training. In experiments on modern LLMs, we demonstrate that TVQ is compatible with modern VQ schemes. As a result, TVQ achieves state-of-the-art quality in low-bit post-training quantization settings with a modest training budget and straightforward PyTorch implementation. For instance, TVQ achieves near-lossless 2-bit quantization for LLaMA2-70B with only 1% accuracy drop on popular Question-Answering benchmarks.

0.23

Beyond Reconstruction Loss in Post-Training Quantization: Balanced Fitting for Large Vision-Language Models

cs.CV cs.LG ·2026-09-28 ·Minchan Kang, Kyeonghye Park, Seungyeon Sa, Seoyoung Cho, Daeshik Kim +1 more
code/data similarity 0.72
Abstract

Post-training quantization (PTQ) enables efficient deployment of large vision-language models (LVLMs), but is typically calibrated on a small set while expected to generalize across diverse downstream tasks. Although recent PTQ methods for LVLMs incorporate sensitivity signals, they still minimize reconstruction loss with respect to the full-precision model, potentially over-preserving FP behavior and calibration-specific bias. Rather than treating quantization solely as an error to be minimized, we observe that it can also provide beneficial regularization for certain layers and modalities. Motivated by this observation, we propose Balanced Fitting, a quantization effect-based framework that balances precision and regularization beyond reconstruction-based optimization. By measuring layer- and component-wise quantization effects for weights, vision activations, and text activations, Balanced Fitting combines fine-grained fitting for sensitive components with coarser fitting to exploit potential regularization benefits. Experiments on multiple LVLMs show that our method consistently outperforms prior PTQ approaches under both weight-only and weight-activation quantization, while lower reconstruction loss does not reliably translate into better downstream performance. The source code is publicly available at https://github.com/kmc3661/BFQ

0.33

Quantizing Recurrent Language Models Is Easier Than You Think

cs.LG cs.AIcs.CL ·2026-11-01 ·Philipp Nazari, Neehal Tumma, Daniela Rus, T. Konstantin Rusch
similarity 0.70
Abstract

Linear recurrences are becoming an increasingly common building block in large language models, replacing the growing KV cache of softmax attention with a fixed-size recurrent state that enables efficient decoding. However, the quantization stack has largely been developed around softmax Transformers, whose numerical properties and inference state differ from those of recurrent models. Our goal is to understand these differences and study the design space of quantization methods for recurrent models. In our analysis, we differentiate between two targets. First, extra-state quantization concerns weights and activations outside the recurrent state, whose distributions are shaped indirectly by the sequence mixer during training. In controlled 1.3B parameter models, we find that decayed recurrences develop weaker residual outlier channels than softmax attention and are therefore easier to quantize without incoherence processing. Second, intra-state quantization concerns the recurrent state itself during decode, where repeated updates create a different numerical problem from KV cache quantization. We instantiate our findings as LoReS, a state quantization pipeline combining value-axis scale grouping to match output channel magnitude, decay-based mixed-precision to protect slowly decaying heads or channels, and stochastic rounding to limit error accumulation under repeated requantization. Across Qwen-3.5 9B, Nemotron-H 8B, and Kimi-Linear 48B-A3B, LoReS supports robust 8-bit state quantization and lower effective precision on shorter decode horizons. We implement LoReS in vLLM and demonstrate end-to-end decode speedups.

0.36

A Unified Hessian-Guided Framework for Post-Training Quantization

cs.LG cs.AI ·2026-10-29 ·Mads Toftrup, Marco Federici, Boris van Breugel, Paul Whatmough, Markus Nagel
similarity 0.69
Abstract · 10 pages + 4 appendix

Low-bit quantization enables efficient deployment of large language models by reducing memory footprint and computational cost. Achieving high accuracy at low precision requires selecting quantization ranges, linear transformations, and weight rounding decisions. Existing approaches typically optimize these components independently using local reconstruction objectives, which fail to account for the varying impact of quantization errors on downstream predictions. Direct optimization of task-level metrics would provide a more faithful objective, but is challenging due to the discontinuous nature of quantization operations and the high computational cost of evaluating their downstream effects. In this work, we derive a Hessian-guided approximation of the output change induced by joint weight and activation quantization. Based on a tractable Fisher approximation, we formulate a unified post-training quantization framework that enables the joint optimization of quantization ranges, linear transformations, and weight rounding under a common output-sensitivity objective. The resulting method remains practical for modern large language models and consistently outperforms state-of-the-art transformation and rounding methods across both channel-wise and block-wise quantization settings.

0.16

Different Tasks, Different Timesteps: Temporal Task-Aware Quantization for Diffusion Language Models

cs.AI ·2026-10-22 ·Ofek Avivi, Eliron Rahimi, Avi Mendelson, Chaim Baskin
similarity 0.69
Abstract · preprint

Diffusion Language Models (DLMs) introduce unique quantization challenges due to their iterative denoising process. In this work, we reveal that quantization sensitivity is both taskand time-dependent, with different downstream tasks exhibiting distinct precision requirements across denoising steps. We further show that these patterns can be predicted without groundtruth labels or task-specific evaluation metrics. Building on these findings, we introduce T 2Quant, a task and time-aware mixedprecision quantization framework that uses a label-free sensitivity signal to optimally allocate activation precision across denoising steps under a fixed bit-width budget. Extensive experiments across three DLMs and six benchmarks demonstrate that T 2Quant consistently improves the average accuracy of existing quantization methods, achieving gains of up to 6.7 percentage points under the same budget.

0.21