CS Paper Radar

Seeing Through the Displaced Frame: Privileged Noise Distillation for Vision-Force Precision Assembly

Ching-Hsiang Chang, Tzu-Yu Chuang, Yi-Hsiu Lee, Yi-Ting Chen, Yuan-Fu Yang, Min Sun

cs.RO ·submitted 2026-10-06 04:39 UTC · v1
benchmarkcode/data

Abstract

Pose error in precision assembly can corrupt not only what a robot observes but also the coordinate frame in which it acts. On the FORGE benchmark, the official state-based policy succeeds in 97% to 99% of episodes with the true pose but only 32% to 60% at the benchmark's $σ=5$ mm pose-noise setting. The same estimated pose enters the observation and anchors the action frame, making the offset unidentifiable from proprioceptive state alone before contact. We supply this missing information during training in two ways. A privileged teacher observes the offset in simulation, while clean demonstrations can instead be relabelled into the displaced frame in closed form. The deployed student is trained with behaviour cloning followed by one DAgger round and receives only noisy state, a raw wrench window, and two RGB cameras at test time. On the unmodified FORGE tasks, the teacher-route student maintains 92% to 99% success across $σ=0$ to 5 mm, while six non-privileged baselines fall to 2% to 80%. A matched behaviour-cloning experiment isolates the source of this robustness. With the same student architecture, data budget, and training procedure, demonstrations generated without offset access yield only 31.5% success at $σ=5$ mm, whereas privileged and relabelled demonstrations reach 88.7% and 95.8%. Deployed zero-shot on a Franka, the student reaches 83.3% pooled success at $σ=5$ mm against 34.4% for the strongest state-based policy. Deployable sensing alone is insufficient. Robustness requires supervision that encodes compensation for the latent frame offset.Project page: https://drychang.github.io/displaced-frame/

Comment
8 pages

Closest papers

Nearest neighbours by meaning across the whole index.

Towards Pose-Robust Few-Shot Vision-Language-Action Models

cs.RO cs.AIcs.CV ·2026-11-18 ·Wenhao Li, Zhongyi Han, Yuhao Wei, Liang Han, Yilong Yin +1 more
benchmarkcode/data similarity 0.70
Abstract · 17 pages, 13 figures, 17 tables (including supplementary material). Project page: https://peacelwh.github.io/WACO/

Fine-tuning a vision-language-action (VLA) model on a few dozen demonstrations is the standard way to put a manipulation policy on a robot, yet the resulting policy silently assumes that the camera and the robot base stay exactly where they were during data collection: a bumped tripod or a base re-docked a few centimetres away makes it reach for the wrong place. We show that both failures are one phenomenon, a change of the camera-to-base extrinsic that the policy has memorised, and that the robot carries everything needed to undo it. We introduce WACO, a world-anchored canonicalization framework for VLA models: the arm, placed by forward kinematics at the measured joint angles, serves as a metric calibration target, and the static scene serves as the world anchor that tells a moved camera from a moved robot. From a single RGB-D frame, WACO estimates both shifts without ground-truth extrinsics or extra data, canonicalises the image to the calibration viewpoint and the state, action and start pose to the calibration base frame, and fine-tunes the unmodified policy under the artefacts of its own estimator. We also introduce LIBERO-PoseShift, the first benchmark for RGB VLAs with graded camera, base and compound shifts. Across LIBERO-PoseShift, the LIBERO-Plus camera track and four real-world tasks on a UR5e robot, WACO consistently outperforms the standard few-shot recipe and prior viewpoint-robust methods, raising shifted success by 13.2 points in simulation and by 36.7 points on the real robot, recovering 90% of the simulation gap to a ground-truth oracle and 87% of the real-robot gap, and establishing a new state of the art among methods that use no perturbed training data, with no test-time calibration. Project page: https://peacelwh.github.io/WACO/.

0.38

Homeward: No Place Like the Training View

cs.RO ·2026-11-18 ·Mingyang Lyu, Yinqian Sun, Gongce Cao, Guobin Shen, Yuhao Zhang +6 more
similarity 0.67
Abstract · 22 pages, including supplementary material; author metadata simplified; paper content unchanged

Vision-language-action (VLA) policies implicitly assume that third-person cameras remain fixed at their data-collection poses; once a camera is bumped, remounted, or swapped at deployment, task success degrades precipitously even though the underlying task and robot remain unchanged. We present Homeward, a training-free, plug-and-play observation adapter that canonicalizes observations from an uncalibrated deployment camera back into the training view for frozen VLA policies. Our design stems from a closed-loop diagnostic paradox in simulation: while re-rendering perturbed views into the training camera with oracle geometry recovers much of the lost performance, substituting an off-the-shelf feed-forward 3D foundation model can leave the policy worse off than applying no correction at all. This degradation concentrates on the thin, articulated robot arm, which feed-forward depth prediction tears and scatters - yet the arm's exact 3D state is already known from robot kinematics. Homeward exploits this asymmetry: it estimates what is unknown - camera parameters and static scene depth - from the live RGB frame and a single training-view reference, and renders what is known - the moving robot links - directly from the kinematic model. Evaluated across $\sim$300,000 closed-loop episodes spanning four frozen VLAs, Homeward boosts success across all 1,599 camera variants of LIBERO-Plus from 62.5%, 76.5%, 68.0%, and 3.6% to 77.6%, 95.1%, 91.2%, and 26.4% for OpenVLA-OFT, $π_{0.5}$, $π_0$, and OpenVLA, respectively. Without any scene fine-tuning or deployment camera calibration, Homeward extends to 6-DoF random placements, focal-length changes, and, with per-step pose estimation, continuous intra-episode camera drift, while matching or surpassing a calibrated, scene-trained view-synthesis baseline on three of four policies on LIBERO-Plus.

0.30

Plan-Conditioned Imitation for Robust Object Retrieval under Self-Occlusion in Dense Clutter

cs.RO ·2026-09-30 ·Kowndinya Boyalakuntla, Ajinkya Pawar, Abdeslam Boularias, Jingjin Yu
similarity 0.67
Abstract · 8 pages, 5 figures

Retrieving objects from dense clutter requires rearrangement during which the manipulator can occlude objects while moving them. Repeated arm withdrawals to restore visibility interrupt execution. We introduce TRACE, a plan-conditioned imitation framework for retrieval under self-occlusion. A single unoccluded observation initializes a digital twin, where a privileged teacher generates a fixed nominal rollout. A recurrent student combines local rollout context, partial object observations, and proprioception to select actions that can correct deviations from the prediction. Behavior cloning initializes the student; DAgger refines it with teacher labels on student-visited states. The rollout remains fixed throughout execution, so the deployed student needs neither online teacher queries nor additional simulator rollouts during pushing. On 511 simulation test scenes, TRACE achieves 90.7% success versus 43.4% for nominal replay and 96.7% for the privileged closed-loop teacher. At a matched 26,373-label budget, student-state supervision achieves 87.8% versus 66.7% for expert-only cloning, demonstrating gains beyond additional labels. On a UR5e, TRACE achieves 90.0% success versus 95.0% for the closed-loop teacher, while reducing total execution time from 192.7 s to 67.3 s. It avoids the teacher's 16.8 sensing-related arm retractions per trial during pushing, retaining a final withdrawal for graspability evaluation. Code and data will be released at: https://trace-retrieval.github.io.

0.36

When Does Cross-View Consistency Matter in Multi-View Appearance Augmentation? A Controlled Study for Visuomotor Policies

cs.RO cs.CV ·2026-11-13 ·Zixuan Jiang
similarity 0.66
Abstract

Multi-view visual augmentation often seeks consistency across cameras, but it is unclear which forms of consistency matter for downstream control. We use simulation-state replay to manipulate cross-view coupling while preserving the per-camera perturbation distributions, physical trajectories, and action labels. Across seven LIBERO manipulation tasks, marginal-matched changes in global appearance, ghost injection, and target color have small average costs for a late-fusion Diffusion Policy: point estimates are near zero or negative, and the largest upper endpoint of the 90% posterior credible intervals is 2.55 percentage points. In contrast, geometrically anti-coupled observations reduce success by 3.30 percentage points relative to coupled observations (90% CrI [0.64, 6.28]), with displacement magnitude, direction marginals, and the number of affected views matched. Camera interventions reveal substantial dependence on wrist-view geometry, while feature analysis shows appearance sensitivity patterns associated with the factors randomized during training. ACT shows a higher target-color cost estimate than DP, with uncertainty that includes zero and sensitivity to task composition. Within the tested tasks and policy configurations, these findings motivate selective consistency constraints: appearance coupling can sometimes be relaxed, whereas task-relevant geometry and cross-view spatial correspondence warrant protection.

0.10

ReGATE: Recurrent Gated Visual Fusion for Reactive Humanoid-Object Interaction

cs.RO ·2026-11-02 ·Hao Zhu, Jorge Peña-Queralta
similarity 0.66
Abstract

Humanoid loco-manipulation requires coordinating object acquisition, transport, and release from onboard sensing while responding to user commands and incomplete visual observations. We present ReGATE, a whole-body controller that combines egocentric depth, proprioception, and online locomotion and contact commands. Built on a teacher-student framework, ReGATE integrates interaction-state estimation through a recurrent adapter that predicts object geometry and physical contact without an external object-pose estimator. Head-wise and global gates regulate visual updates to a proprioceptive pathway. A visual-grounding and corruption curriculum trains the adapter, while phase-aware initialization increases coverage of brief contact transitions. In simulation, ReGATE achieves 85.2% success across 330 static-object acquisition trials, compared with 48.5% for VisualMimic under the same protocol, and 85.9% across 440 moving-object acquisition trials. Deployment on a Unitree G1 demonstrates commanded grasp-transport-release sequences and acquisition of laterally displaced boxes. A qualitative hardware experiment further demonstrates successful box acquisition when the camera is occluded after an initial observation and before the contact command. To the best of our knowledge, this is the first work to extend recurrent gated fusion of onboard depth and proprioception from perceptive locomotion to humanoid loco-manipulation under interrupted visual sensing.

0.13

MAVP: Map-Aware Visuomotor Policies for Mobile Manipulation

cs.RO cs.AIcs.CVcs.LG ·2026-09-22 ·Jinhe Tang, Ruixiao Dai, Weiming Zhi
similarity 0.65
Abstract

Successful mobile manipulation requires coordinated base and arm motion while maintaining accurate spatial positioning. However, demonstration-trained policies can struggle to realise the intended base motion reliably, leading to spatial misalignment and subsequent manipulation failures. We present MAVP (Map-Aware Visuomotor Policies), a framework that improves execution reliability by predicting explicit base-pose targets and tracking them using localisation feedback. MAVP reconstructs a static map from teleoperated demonstrations and expresses demonstrated base trajectories in a shared map frame, providing consistent spatial supervision across demonstrations. At execution time, the policy receives RGB observations, joint states, and the robot's current map-frame base pose, and jointly predicts target base poses, arm actions, and gripper actions. A low-level controller tracks the predicted base targets using feedforward motion and pose error feedback, enabling correction of execution deviations. We additionally use pose-noise augmentation during training to improve robustness to errors in the policy's pose input. Across six real-world manipulation tasks and three policy families, MAVP achieves higher task success rates than unanchored velocity control in all tasks. Videos and additional results are available at https://123qwedsa123.github.io/mavp/.

0.50

Residual Compliant Policy: Learning Compliant Policies from Few Demonstrations

cs.RO ·2026-10-01 ·Chunyu Jiang, Yichen Cai, Shuai Li, Wenbin Sun, João Carvalho +4 more
similarity 0.65
Abstract · 9 pages, 6 figures. Project website: https://residual-compliant-policy.github.io

Contact-rich manipulation requires a robot to be precise in free space to establish the intended contacts, and compliant once in contact to avoid excessive forces. Imitation learning has proven effective for simpler manipulation tasks, but the compliance underlying a demonstration is not directly observable and is therefore difficult to infer from demonstration data alone. We present a framework that makes compliance explicit at every stage. During data collection, the operator teleoperates the real robot while a synchronized digital twin visualizes the error between the commanded reference and the achieved pose, making the current compliance visible, and selects between two discrete compliance modes. To generalize across object poses, we combine Laplacian editing, which retargets trajectories efficiently but is not physics-consistent during contact, with simulation-based trajectory optimization, which enforces physical plausibility but offers no manual guidance. Finally, a residual reinforcement learning policy refines the interaction forces by adjusting the reference pose of the underlying admittance controller. We evaluate on three flipping and pushing tasks on a Franka FR3 based on a total of 7 demonstrations across tasks. Our method is successful on all 40 out-of-distribution trials, compared to 33/40 and 24/40 for two baselines, with our base policy alone reaching 35/40.

0.27

INSPECT: Learning Robot View Selection from Assistant Use

cs.RO cs.CV ·2026-09-17 ·Di Wen, Kailun Yang, Wenhao Guo, Yitian Shi, Junwei Zheng +5 more
code/data similarity 0.65
Abstract · 9 pages, 3 figures, 5 tables. Code: https://github.com/Kratos-Wen/INSPECT

Robots inspecting an assembly must determine which parts are present and whether they are correctly installed. During egocentric assembly assistance, head motion and workpiece handling reveal evidence for these checks, while spoken state confirmations link observations to procedural outcomes. We introduce INSPECT, which learns robot view preferences from records of a smart-glasses assistant that answers part queries and provides next-step guidance. Presence-Invariant TwinSwap (PI-TwinSwap) calibrates object evidence through paired identity interventions. Claim-indexed supervision separates evidence requirements from camera-reproducible observation changes. Object-centered calibration adapts relative view preferences to robot poses, while clause-level screening checks predicted evidence. The robot selects views using only its current observation and known poses, without candidate images. Evaluation uses annotated assistant-video replay to simulate state feedback, without target-domain view labels for policy training. On images of physical gearbox assemblies, INSPECT achieves the highest view utility among the compared non-oracle policies and raises human-rated full verifiability from 34.8% to 41.7% compared with keeping the current view. On commercial angle-grinder recordings in IMPACT, the transferred relative-view selector increases the correct decision rate from 50.6% to 54.3% with a frozen perception head. The source code is available at https://github.com/Kratos-Wen/INSPECT.

0.64