CS Paper Radar

ApexQuant: Data-Free Elastic Quantization by Residual Re-Isotropization

Aksel Fristrup, Sumit Pandey, Ankit Kariryaa

cs.LG ·submitted 2026-10-06 07:49 UTC · v1

Abstract

We introduce ApexQuant, a calibration-free quantization method that recursively re-quantizes the residual error, serving as a refinement layer on top of existing quantizers. We establish that a fresh random rotation returns each residual to the uniform distribution on the hypersphere, which characterizes the rate of progressive error decay across successive passes. This result lets us determine, before any weight is read, how many passes a layer needs for a target weight-space error. Every prefix is itself a valid lower-rate model, so one artifact serves several precisions. We instantiate ApexQuant with three interchangeable stages, scalar, $E_8$ and trellis, and validate it on four open-weight LLMs and on Earth-observation and medical domains where in-distribution data is often unattainable as imagery arrives under restrictive licences or due to patient material under privacy constraints. Progressive re-isotropization comes within a few percent of full precision at four bits and gives the best two-bit arm we measure, in a completely data-free setting.

Comment
25 pages, 6 figures

Closest papers

Nearest neighbours by meaning across the whole index.

ReRound: Reconstructive Rounding to Resolve Midpoint Ambiguity in Calibration-Free LLM Quantization

cs.LG cs.CL ·2026-08-11 ·He-Yen Hsieh, H. T. Kung
similarity 0.62
Abstract · 16 pages, 8 figures

ReRound (Reconstructive Rounding) is a post-training quantization method that addresses the midpoint ambiguity inherent in standard round-to-nearest (RTN) schemes when quantizing weights near the centers of quantization intervals. Starting from a pretrained LLM, ReRound trains a conditional diffusion model to produce continuous reconstructions of low-bit weights for the LLM. These reconstructed weights act as a guidance signal to disambiguate the rounding direction of weights located close to interval midpoints. To integrate this reconstruction-guided rounding with conventional RTN, ReRound introduces a tolerance metric measuring how far the quantized weight (not the final quantized integer) is away from the midpoint: quantized weights within a tolerance region around midpoints are quantized using diffusion-based reconstructions, whereas weights closer to quantization boundaries are quantized with RTN. By sweeping the tolerance parameter, ReRound generates multiple candidate quantized integer weight matrices and selects the de-quantized weight matrix candidate whose leading singular values most closely match those of the original full-precision weights. This selected candidate determines the tolerance parameter ReRound uses. ReRound is particularly effective for smaller LLMs. Across a range of such models, it consistently outperforms standard RTN for 3-bit and 4-bit weight quantization. ReRound achieves superior accuracy compared to an extensive set of calibration-free methods, remains competitive with calibration-dependent approaches, and operates entirely offline, introducing no additional overhead during low-bit inference. The ReRound strategy represents a new approach for low-bit quantization. The method applies to AI models beyond LLMs. This paper focuses on its applications to small LLMs.

0.10

WUSH-KV: KV Cache Quantization with Data-Adaptive Transforms

cs.LG ·2026-09-29 ·Jiale Chen, Vage Egiazarian, Eldar Kurtić, Torsten Hoefler, Dan Alistarh
similarity 0.61
Abstract

KV cache memory and bandwidth costs grow with context length and batch size, which limits efficient long-context inference. To address this bottleneck, we introduce WUSH-KV for low-bit KV-cache quantization. It adapts WUSH, which constructs a data-aware transform from the second-order statistics of both factors in a matrix product to reduce quantization error. WUSH-KV uses calibration data to construct separate key and value transforms, with the value transform folded into the model weights and the key transform applied after RoPE. The transforms can be paired with clipped quantizers. For one such quantizer, QuEST INT, we show that, under mild assumptions, the WUSH transform is near-optimal. With this quantizer, WUSH-KV reduces layerwise reconstruction error and achieves the lowest end-to-end perplexity among other tested transforms. For end-to-end evaluation, we integrate WUSH-KV into SGLang using OSCAR-style percentile-clipped affine quantization. At 2-bit, WUSH-KV performs comparably to or outperforms the OSCAR transform across all evaluated models and downstream tasks.

0.39

Reliability-Preserving Compression for Deployable Medical Image Segmentation

eess.IV cs.AIcs.CVcs.LG+1 ·2026-10-18 ·Sagar Kumar, Shailja Sharma, Tirthajit Baruah, Punit Rathore
similarity 0.60
Abstract

Post-training compression of pretrained medical segmentation models commonly uses quantization, pruning, or distillation to reduce model size and computational cost. Existing medical segmentation quantization studies mainly evaluate Dice, model size, memory, and latency, but this is incomplete for safety-critical use because compressed models should also preserve uncertainty signals that indicate unreliable predictions. We study this problem in compressed MRI/CT segmentation and formalize why Dice can remain stable while uncertainty changes. Motivated by this failure mode, we propose score-guided aggregate-validated mixed precision (SGAV-MP), a post-training compression framework that selects layer precisions under reliability constraints. SGAV-MP ranks quantization actions with a compact benefit-risk score and accepts them only after full-model reliability validation on a calibration set. Across five 2D backbones and three 3D benchmarks, SGAV-MP preserves FP32-level Dice and high uncertainty-map agreement, achieving $3.59\times$--$7.8\times$ compression in 2D and $4.73\times$--$7.82\times$ in 3D. We also report backend-supported TensorRT deployment measurements separately to distinguish runtime execution from reliability-preserving storage compression.

0.28

PRQuant: Permutation Residual Quantization for Low-Overhead Inference

cs.LG cs.CV ·2026-08-16 ·Peiran Wang, Anqi Wang, Jiaying Zhao, Huiwen Yang, Zhenyu Ming +8 more
similarity 0.60
Abstract

Low-bit quantization of linear layers is often dominated by a small number of outlier channels. Existing smoothing, rotation, and residual-based methods can mitigate this issue, but may shift the quantization bottleneck to weights or introduce costly online operations. To address these limitations, we propose PRQuant (Permutation Residual Quantization), a training-free framework that combines channel permutation with offline weight residual compensation. PRQuant identifies the scaled-weight columns with the largest quantization errors and permutes them into contiguous tail blocks. This structure allows the corresponding weight residuals to be precomputed entirely offline, while replacing scattered activation gathering with simple contiguous access during inference, yielding a single regular MXFP4 GEMM for compensated computation. Experiments show that PRQuant substantially reduces down-projection reconstruction error, with scaling and residual compensation providing the main numerical gains while permutation enables a hardware-friendly contiguous layout. Comprehensive experiment results on Qwen3-4B-Instruct-2507 and Qwen3-30B-A3B-Instruct-2507 illustrate that PRQuant achieves up to averagelly 2.6x and 1.8x operator speedup over BF16 respectively, while preserving near plain MXFP4 end-to-end decoding efficiency. Across five downstream benchmarks, PRQuant achieves the best average accuracy among the quantized methods, improving accuracy over MXFP4 by 1.24 and 0.55, respectively.

0.04

When Lower Reconstruction Loss Hurts: Distributionally Robust Refinement for Low-Bit LLM Quantization

cs.AI cs.LGstat.ML ·2026-10-08 ·Yanlong Zhao, Xiaoyuan Cheng, Huihang Liu, Baihua He, Xinyu Zhang +4 more
similarity 0.60
Abstract

Weight-only post-training quantization (PTQ) relies heavily on reconstruction loss minimization to preserve model quality at low precision. We show that the weights favored by minimizing this loss need not yield better model performance on new tasks. In fact, we find that lower reconstruction loss can even degrade model performance on the same calibration data. Our analysis further shows that weights with lower reconstruction loss on calibration data can have higher loss than other weights when the distribution of input activations changes. Motivated by these observations and our analysis, we propose Distributionally Robust Quantization (DRQ), a post-hoc refinement process that minimizes worst-case reconstruction loss over a constrained set of input activation distributions. DRQ refines the integer codes representing quantized weights within the existing quantization grid, keeping quantization parameters and inference operators unchanged. Extensive experiments show that DRQ improves models quantized by six representative PTQ methods, including AWQ, GPTQ, and ParoQuant, and delivers gains across both dense and mixture-of-experts large language models. These results establish DRQ as a general post-hoc refinement framework for weight-only PTQ, achieving better downstream performance without adding inference overhead.

0.17

Adaptive Computation with Conformal Certification

cs.LG ·2026-10-13 ·Shehtab Zaman, Aneesh Rangnekar, Nancy Lee, Harini Veeraraghavan
benchmark similarity 0.59
Abstract

Scientific imaging data involving medical (e.g., 3D radiographic, microscopic images) and astronomical sensors pose different challenges from natural images. One key challenge is that these datasets are often orders of magnitude larger than natural images. Efficient training and inference on such data is challenging due to the increased hardware requirements, often needing bespoke solutions. Moreover, the relevant objects such as tumors and astronomical phenomena are sparsely distributed with respect to the background information. Standard efficiency techniques like quantization and pruning apply uniform scaling of all regions, potentially compromising the precision/fidelity of predictions. Thus, efficient methods that reduce computational requirements without losing resolution for relevant parts of the data and with uncertainty estimates on predictions are essential. We present \textit{Conformal Adaptation} with risk guarantees for uncertainty-aware sparse computations. Our formalism is general, spanning dense pixel-level classification and regression tasks where hierarchical models predict at low resolution, certify the signal using conformal risk control, and refine the certified predictions. We benchmark our method on multiple tasks such as 3D medical image segmentation, 2D galaxy flux prediction, and 1D calcium spike rate prediction, achieving $2.5$--$72\times$ wall-clock speedup across the various tasks, including on commodity CPUs.

0.15

CentriQ: Calibration-Free Quantization of Diffusion Transformers via Exact Mean Centering

cs.CV cs.AIcs.RO ·2026-10-05 ·Nataša Jovanović, Mathieu Salzmann, Saqib Javed
hot direction similarity 0.58
Abstract · Code and project page will be released soon

Diffusion transformers (DiTs) achieve state-of-the-art image generation, but their sampling cost limits deployment. Quantizing both weights and activations to 4 bits reduces this cost, yet existing methods fall short in one of two ways. Calibration-based methods are tied to a specific checkpoint and prompt distribution, whereas data-free Hadamard rotation, effective for LLMs, loses quality on DiTs. We show that this loss has a structural cause. Adaptive layer-norm conditioning adds a per-token mean to the activations, and at the widths of the evaluated DiTs, the Hadamard rotations used by data-free methods cannot spread this mean uniformly across coordinates. A single dominant direction therefore survives the rotation and sets the quantization range. We introduce CentriQ, a calibration-free quantizer that centers each token before rotation and restores the mean exactly through a rank-1 full-precision branch, so that per-token scales follow in closed form without data. Weights are fitted under a robust $\ell_p$ objective that tracks the dense mode of each group and discounts heavy tails. Across three DiTs, CentriQ matches the quality of calibrated SVDQuant at 4 bits, whereas calibration-free weight quantizers with plain per-token activation quantization collapse or degrade substantially. CentriQ outperforms the strongest calibration-free method reported to date at 2-bit weights. It is also the first calibration-free method to retain usable image quality at 2-bit activations.

0.39

Replay the Curvature: Accurate and Scalable NVFP4 Quantization for Large Language Model Inference

cs.LG cs.CLcs.DC ·2026-09-29 ·Ruiyi Ding, Jie Li, Kang He, Ziyan Liu, Chengru Song +2 more
similarity 0.58
Abstract · 33 pages

Large language models make weight storage and memory traffic major inference costs, motivating low-precision formats that represent each weight with only a few bits. Such formats use a scale to map floating-point values into a small codebook; NVFP4 improves local range utilization by letting every 16 E2M1 weights share an E4M3 block scale. Choosing that scale is difficult in GPTQ because quantizing one column updates those that follow, so evaluating a block independently can misestimate its final reconstruction error. Large models pose a second challenge: full-precision weights, calibration activations, and second-order state cannot all remain on one accelerator, while assigning complete layers to devices leaves each time-consuming layer solve serial. We introduce \emph{Schur Replay}, a scale-selection algorithm that reproduces the GPTQ updates caused by each block scale and scores the resulting block error after accounting for compensation from unquantized columns. Separately, our execution infrastructure keeps only the active layer resident, tiers activations across device, host, and disk, retires full-precision layers after export, and distributes independent output rows across tensor-parallel ranks. Together, the algorithm and infrastructure attain $99.35\%$ and $100.84\%$ question-weighted recovery from BF16 across seven benchmarks on Qwen3.5-397B-A17B and Llama-3.3-70B-Instruct. On the 397B model, the infrastructure reduces measured per-layer time by $15.17\times$ over ModelOpt and $23.14\times$ over LLM Compressor, with lower memory used per GPU.

0.15