CS Paper Radar

Test-Time Adaptation of Quantized ViTs via Single-Pass Quantizer-Aligned Recalibration

Hyeongheon Cha, Young D. Kwon, Sung-Ju Lee

cs.CV cs.AI ·submitted 2026-10-06 13:48 UTC · v1
code/data

Abstract

Post-training quantization is a standard route to fitting vision transformers (ViTs) into edge compute and memory budgets, yet quantized models become especially brittle under distribution shift. Test-time adaptation (TTA) addresses such shifts without labels, but most existing approaches are poorly aligned with the constraints of quantized inference. Prevailing TTA methods recover accuracy through backpropagation, while backprop-free methods often still incur overhead from extra forward passes or parameter updates, and lightweight feature- or logit-level methods recover only part of the loss. Across these approaches, a quantization-specific failure mode that amplifies the drop is not directly targeted: under shift, activations occupy frozen quantizers' calibrated ranges differently, distorting their code distribution. We propose Quantizer-Aligned Recalibration (QuAR), a single-pass TTA method tailored to quantized ViTs that neither backpropagates nor updates any model parameters. QuAR recalibrates activations at the input to a frozen quantizer, mapping the test stream's running per-channel statistics back toward the source calibration. On ImageNet-C with ViT-B, QuAR achieves the highest mean accuracy among state-of-the-art backprop-free TTA methods at 3-, 4-, 6- and 8-bit weight/activation precision, outperforming the strongest baseline by 2.28 points at 8 bits and 4.00 at 3 bits, with 46% lower latency and a memory overhead of only 0.17 MB (0.01% of peak inference memory). Analysis and diagnostics trace the gain to a reduced per-channel mismatch at these quantizers, which restores the code distribution the baselines leave unchanged or distort further. A single fixed configuration remains ahead across continual streams, non-i.i.d. label shift, seven out-of-distribution suites, and three other backbones.

Comment
44 pages, 6 figures. Code at https://github.com/chahh9808/QuAR

Closest papers

Nearest neighbours by meaning across the whole index.

FORGE: Forward-Only Test-Time Adaptation for Integer-Only Vision Models on Microcontrollers

cs.CV cs.ARcs.LG ·2026-09-01 ·Muhammad Rehan, Haider Ali, Muhammad Ali Munir, Moaz Amjad
publishedcode/data similarity 0.72
Abstract · 16 pages, 5 figures, 9 tables. Published in Transactions on Machine Learning Research (2026). OpenReview: https://openreview.net/forum?id=A4…

Vision models deployed on microcontrollers (MCUs) are quantized to integer-only arithmetic and run in inference-only runtimes that do not carry the machinery backpropagation needs: the standard tool for adapting a model to the distribution shift (sensor noise, blur, lighting) it meets in the field. Existing forward-only test-time adaptation (TTA) methods either run only on server- or edge-GPU-class models (not true microcontroller integer execution), or require the batch-normalization (BN) layers that integer deployment fuses away. We present a forward-only TTA method that operates on deployed, BN-folded, integer-only convolutional networks. The key observation is that fusing BN into the preceding convolution, a mandatory step for integer inference, destroys the statistics that normalization-based adaptation relies on. We restore adaptation by re-normalizing each folded convolution's per-channel output to its clean training statistics, using only forward-pass estimates. The method (i) recovers most of gradient-based TENT's accuracy gain (+20.9 vs. +24.9 points) and matches forward-only BN adaptation, while being the only method that runs on a folded integer-only model; (ii) needs to adapt only 3 of 21 layers (selected without seeing the test corruptions) to recover 93% of the benefit; (iii) survives single-sample streaming with a batch-size-scaled momentum; and (iv) generalizes across three datasets (up to 200 classes) and two architectures. We validate bit-exact int8 convolution execution and deploy on an ESP32-S3, where, measured with a Nordic PPK2 power profiler, the forward-only adaptation (a lightweight fp32 recalibration around the int8 convolutions) costs only 8.3 mJ (6.8% of inference energy) and 21.9 ms on the deployed SIMD-optimized model: forward-only adaptation is cheap on a real microcontroller.

0.74

Quantizing Looped Transformers: Feedback Exposure and Calibration Blindness

cs.LG cs.CL ·2026-09-25 ·Nux Li
similarity 0.69
Abstract · 27 pages, 5 figures

Looped transformers reuse weights across recurrence steps, making low-bit quantization especially attractive. We identify two distinct failure modes of standard post-training quantization. On Huginn-3.5B, per-channel INT4 fails primarily at the non-residual loop-entry adapter, while quantizing the residual core is much less damaging. We call this feedback exposure: a quantized layer perturbs the recurrent state without an identity path, and the resulting error is fed back at later steps. Controlled experiments on linear filters and Mamba state-space models show that feedback exposure also occurs outside transformers. Grouped INT4 reveals a separate failure, calibration blindness: our one-step GPTQ baseline builds its Hessian from step-0 activations, leaving input directions used later in the recurrence nearly unweighted. Across nine checkpoints from seven looped architectures, one-step GPTQ is worse than round-to-nearest (RTN) on the primary task metric for five checkpoints. Accumulating the GPTQ Hessian across recurrence steps outperforms both one-step GPTQ and RTN on all nine checkpoints and recovers bf16-level accuracy on Huginn. These results separate two questions for PTQ on looped models: where quantization error enters the recurrence, and which states calibration sees.

0.52

When Lower Reconstruction Loss Hurts: Distributionally Robust Refinement for Low-Bit LLM Quantization

cs.AI cs.LGstat.ML ·2026-10-08 ·Yanlong Zhao, Xiaoyuan Cheng, Huihang Liu, Baihua He, Xinyu Zhang +4 more
similarity 0.69
Abstract

Weight-only post-training quantization (PTQ) relies heavily on reconstruction loss minimization to preserve model quality at low precision. We show that the weights favored by minimizing this loss need not yield better model performance on new tasks. In fact, we find that lower reconstruction loss can even degrade model performance on the same calibration data. Our analysis further shows that weights with lower reconstruction loss on calibration data can have higher loss than other weights when the distribution of input activations changes. Motivated by these observations and our analysis, we propose Distributionally Robust Quantization (DRQ), a post-hoc refinement process that minimizes worst-case reconstruction loss over a constrained set of input activation distributions. DRQ refines the integer codes representing quantized weights within the existing quantization grid, keeping quantization parameters and inference operators unchanged. Extensive experiments show that DRQ improves models quantized by six representative PTQ methods, including AWQ, GPTQ, and ParoQuant, and delivers gains across both dense and mixture-of-experts large language models. These results establish DRQ as a general post-hoc refinement framework for weight-only PTQ, achieving better downstream performance without adding inference overhead.

0.17

Rotation Is Token-Blind: A Structural Criterion for Post-Training Quantization of Feed-Forward Geometry Transformers

cs.CV ·2026-11-05 ·Huanfei He, Bohao Zhang, Jiaxin Zhang, Wei Sui, John See +2 more
similarity 0.68
Abstract

Feed-forward 3D models use Transformers to predict camera poses, depth, and structure in one pass, avoiding iterative multi-view optimization. Long sequences and deep attention incur high compute and memory costs, motivating Post-Training Quantization (PTQ) for deployment. Existing PTQ methods mainly suppress channel-wise outliers by smoothing or orthogonal rotation. Geometry Transformers introduce a different challenge: heterogeneous token types share one activation quantization grid. A few special tokens may exert high leverage over global outputs and be updated by only a subset of blocks. Token-blind transforms, which apply the same transformation to every token, reduce overall quantization error but cannot remove differentiated degradation across token types. We propose QMapAnything, a structure-aware PTQ framework. We cast floating-point-preserving rotation and smoothing as a token-blind reparameterization group, and prove that they yield common-mode gains while leaving relative token SNR unchanged. We introduce a statistic $Γ$ that combines a special token's quantization disadvantage and output leverage to predict whether differentiated bias correction is needed beyond rotation. Experiments on geometric benchmarks show that W4A8 closely matches full-precision performance. Under W8A8, peak memory falls by $2.2$--$3.1\times$ versus FP32, with up to $3.1\times$ speedup on real hardware. These results provide a principled and efficient approach to deploying feed-forward 3D reconstruction models in resource-constrained edges.

0.16

GLF-Q: Global-Local Feature-based Quantization for Vision Transformers

cs.CV ·2026-09-28 ·Peilin Sun, Guang Liang, Jin Tong, Jianxin Wu
similarity 0.68
Abstract

Post-training quantization (PTQ) efficiently compresses Vision Transformers (ViTs) without retraining, yet suffers severe accuracy degradation at low bit-widths. Existing optimization-based PTQ methods guide block reconstruction via either soft logits or second-order Hessian proxies. Logit supervision is prone to overfitting on limited calibration data, while Hessian approximations incur structural truncation errors. To address these limitations, we propose \textbf{GLF-Q}, a novel PTQ framework guided by Global-Local Feature alignment. GLF-Q propagates quantized block outputs through downstream full-precision layers to align penultimate-layer representations under local output regularization, providing downstream feature supervision without explicitly approximating the Hessian or using a Taylor expansion. Furthermore, offline Hadamard transformations are introduced with zero runtime overhead to disperse activation outliers across channels, effectively contracting dynamic ranges and reducing quantization errors. Meanwhile, optimizing this loss via a Straight-Through Estimator (STE) achieves rapid convergence, bypassing continuous relaxation rounding formulations such as AdaRound. Extensive experiments across representative ViT architectures demonstrate that GLF-Q with standard uniform quantizers substantially outperforms state-of-the-art methods under 3-bit quantization on image classification. In addition, GLF-Q exhibits strong out-of-domain calibration robustness and achieves speedups under 8-bit GPU deployment.

0.24

WUSH-KV: KV Cache Quantization with Data-Adaptive Transforms

cs.LG ·2026-09-29 ·Jiale Chen, Vage Egiazarian, Eldar Kurtić, Torsten Hoefler, Dan Alistarh
similarity 0.67
Abstract

KV cache memory and bandwidth costs grow with context length and batch size, which limits efficient long-context inference. To address this bottleneck, we introduce WUSH-KV for low-bit KV-cache quantization. It adapts WUSH, which constructs a data-aware transform from the second-order statistics of both factors in a matrix product to reduce quantization error. WUSH-KV uses calibration data to construct separate key and value transforms, with the value transform folded into the model weights and the key transform applied after RoPE. The transforms can be paired with clipped quantizers. For one such quantizer, QuEST INT, we show that, under mild assumptions, the WUSH transform is near-optimal. With this quantizer, WUSH-KV reduces layerwise reconstruction error and achieves the lowest end-to-end perplexity among other tested transforms. For end-to-end evaluation, we integrate WUSH-KV into SGLang using OSCAR-style percentile-clipped affine quantization. At 2-bit, WUSH-KV performs comparably to or outperforms the OSCAR transform across all evaluated models and downstream tasks.

0.39

HGA-Quant: Heterogeneity-Aware Quantization for AutoRegressive Visual Generation Models

cs.CV cs.AI ·2026-10-11 ·Xinmeng Liu, Xianglong Yan, Kaicheng Yang, Weisheng Dong, Yulun Zhang
code/datahot direction similarity 0.67
Abstract

Recently, AutoRegressive Visual Generation (ARVG) models have emerged as a competitive paradigm for high-quality image synthesis. However, their substantial computational and memory demands make them difficult to deploy on resource-constrained edge devices. Post-Training Quantization (PTQ) provides a promising solution to reduce the computational and memory costs of ARVG models, yet existing methods often suffer from substantial image quality degradation under low-bit quantization. In this paper, we propose a training-free PTQ framework for ARVG, consisting of Tail-Aware Bounded-init Grid Refinement (T-BGR) and Coarse-to-Fine Activation Precision Scheduling (CAPS). T-BGR introduces a tail-aware reconstruction objective for weight quantizer calibration, assigning greater importance to distribution-tail coefficients and preserving fine-grained information without introducing additional parameters or high-precision branches. CAPS performs coarse-to-fine activation precision scheduling by jointly considering the importance and computational cost of different generation stages, enabling efficient mixed-precision allocation under a given bit budget. Extensive experiments on multiple ARVG backbones demonstrate that our framework consistently improves robustness under aggressive low-bit quantization. Notably, on Infinity, our framework achieves near full-precision image generation quality at an effective W4A5.6 activation precision, while existing methods at W4A6 still exhibit noticeable quality degradation or inconsistent performance. Code is available at https://github.com/lxm-lc/HGA-Quant.

0.37

The Devil Is in the Reconstruction Loss Scale: Rethinking Optimization in LLM Quantization

cs.CL cs.AI ·2026-10-01 ·Chao Li, Shigeng Wang, Anbang Yao
code/data similarity 0.67
Abstract · Project page: https://github.com/IntelChina-AI/RMSE

Post-training quantization (PTQ) methods typically use sequential quantization that partitions a pre-trained LLM into a series of units (e.g., transformer blocks), with one unit quantized at each stage. State-of-the-art PTQ methods are predominantly learning-based, optimizing auxiliary quantization parameters (e.g., scaling factors, rotation matrices, clipping thresholds, and adapters) via gradient descent to minimize a reconstruction loss. A common practice is to use mean squared error (MSE) as the reconstruction loss function, yet its induced optimization behavior remains largely unexplored. In this work, we take a holistic view of sequential quantization and systematically investigate how optimization evolves from the first quantization stage to the last, aiming for a deep understanding of optimization in learning-based PTQ schemes. Through extensive empirical studies spanning representative learning-based PTQ methods, LLM families, model scales, architectures, quantization settings and various tasks, we consistently uncover Optimization Imbalance: reconstruction loss magnitudes vary dramatically across stages, accompanied by highly uneven gradient magnitudes and parameter updates under MSE. We term the cross-stage range of loss magnitudes the reconstruction loss scale, and reveal that MSE translates the unexpectedly large reconstruction loss scale into highly uneven gradient magnitudes, which in turn lead to uneven optimization strength across quantization stages. This finding suggests a general principle for improving learning-based PTQ: optimization strength across stages should be decoupled from the reconstruction loss scale. Theoretically, we show that root mean squared error (RMSE) variants defined at the sample, channel, token, and element levels naturally realize this principle through implicit gradient normalization, outperforming MSE significantly as a drop-in replacement.

0.34