CS Paper Radar

Sparse2comm: Towards Robust Cooperative 3D Object Detection

Lei Yang, Boqi Li, Chunmian Lin, Li Wang, Ziying Song, Shaoqing Xu, Heye Huang, Haibao Yu, Chen Lv

cs.CV ·submitted 2026-10-06 15:48 UTC · v1
code/data

Abstract

Cooperative perception improves autonomous driving by sharing complementary observations among vehicles and roadside infrastructure for 3D object detection. However, practical deployment is constrained by limited bandwidth and unreliable cooperation, where packet loss, transmission delay, and spatial misalignment jointly degrade the cooperative feature stream. Existing methods often reduce communication cost or compensate for one degradation type, leaving coupled disturbances insufficiently addressed. To address this problem, we propose Sparse2comm, a bandwidth-efficient and robust cooperative 3D object detection framework that treats unreliable cooperation as progressive restoration over degraded cooperative features. Sparse Feature Encoding first encodes communication as randomly mask-sampled foreground features transmitted by collaborating agents, from which the ego vehicle reconstructs dense semantic representations. This sparse-to-dense mechanism learns to infer missing object-centric content from sparse observations, enabling ultra-low-bandwidth communication and packet-loss recovery within the same representation. On the semantically restored features, Latency-Aware Alignment predicts motion flow to compensate delayed messages, and Self-Calibrating Fusion estimates residual spatial offsets in a self-supervised manner before adaptive cross-agent fusion. Sparse2comm therefore restores semantic completeness, temporal consistency, and spatial alignment in an ordered pipeline. Extensive experiments on DAIR-V2X, OpenV2V, and V2V4Real show that Sparse2comm maintains competitive clean accuracy and consistently improves robustness under individual and mixed real-world degradations. Compared with the selective feature communication baseline Where2comm, Sparse2comm improves mixed-setting AP@0.5/AP@0.7 by +20.15/+11.79, +12.66/+11.07, and +15.36/+12.61 on the three datasets, respectively.

Comment
15 pages. Code: https://github.com/yanglei18/Sparse2comm

Closest papers

Nearest neighbours by meaning across the whole index.

Where Demand Meets Supply: Spatial Elastic Consensus for Low-Bandwidth Collaborative Perception

cs.CV ·2026-11-17 ·Linshan Yan
similarity 0.72
Abstract · 10 pages

Occlusions and limited sensor range make ego-only 3D perception insufficient for safe driving. Collaborative perception addresses this by enabling connected vehicles to share complementary observations, yet it remains constrained by tight vehicular communication budgets. While spatial selection is more flexible than fixed-rate feature compression, existing selectors remain largely sender-driven and waste scarce bandwidth on ego-visible targets. Furthermore, applying convolutions after masking spreads isolated tokens into their neighborhoods, silently violating low-bandwidth constraints. To address this, we propose Spatial Elastic Consensus (SEC), a bandwidth-adaptive framework centered on bilateral demand-supply consensus. Instead of unilateral token selection, the ego vehicle formulates a content-aware demand prior while each collaborator evaluates its local supply. This single-round consensus allocates the token budget to critical ego-missed evidence rather than ego-visible redundancy, without transmitting dense maps. To guarantee exact budget compliance, an anti-dilation refine-before-mask pipeline refines features prior to discrete token selection, preventing receptive-field leakage. A lightweight deformable sampler then aggregates these sparse messages with learned local offsets, compensating for the spatial context lost to token selection and mitigating inter-agent pose drift. Evaluated at a stringent 64KiB budget, SEC consistently achieves the best AP@0.7 on the simulated OPV2V and V2XSet datasets and the real-world DAIR-V2X dataset. These results demonstrate that combining bilateral consensus with budget-exact transmission is key to efficient low-bandwidth collaborative perception.

0.19

LR-V2X: Loss-Resilient Collaborative Perception under Low-Bandwidth Communication

cs.CV ·2026-10-08 ·Kang Yang, Tianci Bu, Peng Wang, Deying Li, Yongcai Wang
code/data similarity 0.70
Abstract

Given the inherent unpredictability of packet loss in vehicular wireless communications, V2X collaborative perception can yield practical benefits only if agents can achieve reliable collaboration under lossy and low-bandwidth communication conditions. Existing dense BEV feature fusion methods depend on redundant BEV feature exchange, which is infeasible in low-bandwidth scenarios, while compact-communication methods aggressively compress messages but can hardly recover the missing feature content after packet loss. In this paper, we present LR-V2X, a loss-resilient, latent-space reconstruction framework that converts corrupted received latents (even under severe 90% packet loss) into a spatial prior and then reconstructs the missing BEV information from this informative prior and using ego context as condition. Notably, the model can be trained under complete communication conditions and can be directly applied to lossy conditions at test time, eliminating the need for training under numerous lossy conditions. Experiments on DAIR-V2X and V2XREAL show that LR-V2X delivers the strongest robustness under severe packet loss and preserves reliable collaboration as communication quality degrades. And it reduces communication overhead by $64\times$ compared to dense BEV feature fusion baselines. Code will be released at https://github.com/sidiangongyuan/LR-V2X.

0.38

CoAnchor: Robust Collaborative Perception under Spatio-Temporal Misalignment via Object-Level Anchors

cs.CV cs.AI ·2026-08-21 ·Chi Li, Rui Lin, Aobo Ji, Dongzhu Xu
top venue similarity 0.70
Abstract · MM2026

Collaborative perception extends the sensing range of a single vehicle by fusing observations from nearby agents, which improves the robustness of autonomous driving. In realistic deployments, however, the received collaborator messages are often affected by both communication delay and relative-pose noise, which jointly cause stale observations, spatial misalignment, and unstable feature fusion. Existing methods usually address these issues from either the spatial or temporal side, but handling them jointly in a unified and efficient manner remains challenging. In this paper, we propose CoAnchor, an anchor-centric spatio-temporal alignment framework for asynchronous collaborative perception. Instead of directly reasoning on dense BEV features, CoAnchor builds sparse object-level spatio-temporal anchors as a shared interface for pose correction and tightly connects spatial refinement, temporal propagation, and current-time verification within one unified loop, while keeping the overall correction process lightweight. Extensive experiments on both simulated and real-world datasets illustrate that CoAnchor remains competitive under clean settings and improves the robustness under joint delay and pose perturbations with a favorable practical accuracy-efficiency trade-off.

0.42

Temporal Residual Bottleneck for Robust Asynchronous Collaborative Perception

cs.CV ·2026-10-07 ·Melih Yazgan, Ahmed Abouelazm, J. Marius Zöllner
published similarity 0.69
Abstract · Accepted to ACCV 2026

Collaborative perception extends the sensing range of autonomous vehicles, but its performance degrades when shared features arrive stale or incomplete. Most latency-robust methods compensate delayed collaborator features through flow-guided alignment or direct feature transport. In this work, we formulate asynchronous collaborative perception as temporal residual prediction. Our Temporal Residual Bottleneck keeps a deterministic pose-warped collaborator feature as a conservative anchor and uses a $Δt$-conditioned xLSTM to extract residual temporal evidence from the available history. A detector-facing residual bottleneck then applies only gated, regularized corrections before ego-side fusion, reducing the risk of overwriting reliable static structure when temporal correspondence is uncertain. Experiments on DAIR-V2X and OPV2V show that our method is especially effective under severe fixed/irregular delays and packet drops. On DAIR-V2X, the reported checkpoint trades a small amount of synchronized peak accuracy for better robustness under stronger communication degradation. Controlled diagnostics further indicate that direct feature transport has oracle headroom but can become unreliable when deployed without accurate correspondence. These results support temporal residual fusion as a practical alternative for asynchronous and incomplete collaborative perception. Code will be publicly released at https://url.fzi.de/8dk38.

0.21

Roadside-Cooperative Autonomous Driving: From Data Platform to Vision-Language End-to-End Reasoning

cs.RO ·2026-08-21 ·Yitao Xu, Tong Wu, Yiyan Wu, Guoji Xu, Yanbo Jiang +5 more
benchmark similarity 0.69
Abstract · 15 pages, 5 figures, under review

Vehicle-to-Everything (V2X) cooperation enables beyond-line-of-sight perception, mitigating occlusions in single-vehicle sensing. However, existing V2X benchmarks provide limited support for closed-loop evaluation and language-grounded supervision, hindering the development of vision-language models (VLMs) for end-to-end cooperative driving. To address these limitations, we introduce V2XBench, a simulation platform featuring synchronized ego--roadside sensing and closed-loop evaluation, together with Chat-V2XBench, a progressively structured VQA dataset for cooperative reasoning. Building upon this benchmark infrastructure, we propose AURORA, an end-to-end cooperative driving framework. Equipped with a dual-view perception architecture, AURORA mitigates spatial and semantic discrepancies across ego and roadside viewpoints through a query-level Cross-View Query Alignment and Fusion (CQAF) module. Leveraging the resulting unified tokens, a LoRA-adapted VLM bridges semantic reasoning and generative trajectory planning. Extensive closed-loop evaluations on V2XBench demonstrate that AURORA achieves state-of-the-art performance in heavily occluded scenarios, with a Route Completion rate of 98.21% and a Driving Score of 76.02, while requiring low roadside communication bandwidth. Ultimately, this work pioneers an extensible V2X--VLM paradigm, paving the way for next-generation cooperative autonomous driving.

0.32

CoCam4D: Geometry-Aware Cooperative 4D Perception for Camera-Only Autonomous Driving

cs.RO cs.CV ·2026-10-08 ·Soham Pahari, Sudip Das, Arindam Das, Ujjwal Bhattacharya
similarity 0.69
Abstract

Autonomous vehicles often suffer from limited perception due to occlusions, blind spots, limited sensor range, and the complex nature of surrounding environments. Multi-agent collaborative perception (CP) addresses these challenges by allowing vehicles to share sensory information and reconstruct the scene cooperatively. However, camera-only perception remains fundamentally limited by the uncertainty of distance-dependent monocular depth estimation. We propose CoCam4D, a Bayesian framework for collaborative perception that explicitly models geometric uncertainty. It uses a VGGT-based feedforward network to generate 3D Gaussian scene representations with associated uncertainty estimates, enabling multiple vehicles or agents to efficiently combine their observations. By sharing compact Gaussian primitives, reliable observations from one agent can reduce the depth uncertainty of another without requiring LiDAR sensors. To support real-world deployment, we introduce Dynamic Object Primitives (DOPs), a compact 35-byte representation designed for efficient C-V2X communication. Extensive experiments show that our proposed method consistently outperforms recent vision-only methods, achieving improvements of 11.48% on OPV2V+ and 10.62% on DAIR-V2X-C, demonstrating the potential of geometrically grounded collaborative perception for LiDAR-free autonomous driving.

0.14

Dense Coverage, Sparse Refinement: Byte-Constrained Cooperative Perception

cs.CV ·2026-09-24 ·Melih Yazgan, Timon Müller, J. Marius Zöllner
published similarity 0.68
Abstract · Accepted at WACV 2027 (first-round acceptance)

Collaborative perception improves autonomous perception by sharing intermediate Bird's-Eye-View (BEV) features across connected agents, but dense feature exchange is difficult to deploy under strict Vehicle-to-Everything (V2X) bandwidth limits. Existing efficient methods typically either compress the full feature map uniformly, spending bits on low-value background, or sparsify communication, risking the loss of useful context. We propose a coverage-refinement design for byte-constrained cooperative perception: each agent transmits a highly compressed coarse layer over the full BEV map and allocates the remaining budget to selected high-resolution patches. A Task-Aware Benefit Selector ranks cells by estimated downstream utility, enabling deterministic budgeted refinement and zero-retraining adaptation to changing bandwidth. The receiver reconstructs a dense BEV tensor compatible with standard fusion modules. Experiments on DAIR-V2X and OPV2V show strong accuracy-payload trade-offs at kilobyte-scale budgets. On DAIR-V2X, our method reaches 0.60 AP@0.7 at only 1.87 KB per non-ego agent, compared with 0.52 at 4.61 KB for uniform SimVQ compression. Controlled diagnostics further show that the gain arises from coverage-refinement allocation rather than quantization alone. Code will be published.

0.62

FedCKA: Representation-Guided Layer Personalization for Federated 3D Perception Across Driving Domains

cs.CV cs.RO ·2026-10-01 ·Jolle Verhoog, Ali Burak Ünal, Holger Caesar
benchmarkcode/data similarity 0.68
Abstract · 8 pages, 3 figures. Submitted to IEEE ICRA 2027

Robust perception in intelligent vehicles demands 3D object detectors that remain dependable under domain shifts, such as changes in time of day, location, or weather. However, due to costly annotation and rare shifts, some environments lack sufficient data to train a standalone detector. Federated learning offers a privacy-preserving framework for collaborative model training, enabling clients to benefit from shared learning across diverse environments. Yet, this framework traditionally relies on a single global consensus model, which struggles to perform across heterogeneous local data distributions. Local conditions are better captured by adapting a subset of the model, but many personalization approaches rely on predefined layer partitions or fixed personalization ratios, thereby limiting adaptation to client-specific divergence. To reduce this rigidity, we propose FedCKA, a Centered Kernel Alignment (CKA)-based strategy that dynamically handles the personalization-globalization trade-off. Specifically, FedCKA computes layer-wise feature similarities between local client models and the global consensus model during training. By converting layer-wise similarity scores into client-specific aggregation masks, FedCKA selectively shares representation-consistent layers. Evaluation on a unified multi-domain benchmark based on nuScenes shows that FedCKA outperforms established federated baselines, including FedBN, FedRep, and FedSelect, improving average NDS by 7 percentage points over the strongest baseline. The findings offer both a comparative benchmark and a promising direction for robust federated 3D perception across shifts in location, weather, and illumination. Code is available at https://github.com/j-verhoog/FedCKA.

0.36