CS Paper Radar

Secure Speculative Decoding for Large Language Models

Yichi Zhang, Zhiqi Wang, Neil Gong, Yuchen Yang

cs.CR cs.AIcs.LG ·submitted 2026-10-06 16:59 UTC · v2
published

Abstract

Speculative decoding accelerates inference for a large language model (LLM), referred to as the \emph{target model}, by first using a smaller model, referred to as the \emph{draft model}, to generate candidate tokens and then verifying them with the target model for acceptance or rejection. Prior studies primarily focused on the efficiency-utility trade-off of speculative decoding, e.g., lossy speculative decoding, leaving its security implications largely unexplored. In this work, we bridge this gap by providing the \emph{first} systematic study of the security implications of speculative decoding. Through a large-scale measurement study, we reveal a pronounced security-utility asymmetry: across a wide range of lossy speculative decoding methods, improvements in inference efficiency come at a disproportionately high cost to security, with attack success rates for jailbreak and prompt injection attacks increasing much faster than utility degrades. We then propose SecureSD, a new theory-guided speculative decoding method that enhances security while maintaining efficiency and utility. Specifically, our theoretical analysis reveals that security degradation primarily originates from the early tokens generated by the draft model. Motivated by this insight, SecureSD applies a stricter verification criterion to draft-model tokens at early decoding positions. Extensive experiments on both security and utility benchmarks demonstrate that SecureSD significantly improves security while preserving efficiency and utility compared to existing speculative decoding methods.

Comment
18 pages, accepted by IEEE S&P 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Speedbumps: Rejection Attacks on Speculative Decoding

cs.CR cs.AI ·2026-10-07 ·Adam Y. J. Jones, Yu Yuan, Sergio Maffeis
similarity 0.82
Abstract

Speculative decoding is a popular technique for increasing the speed and reducing the costs of large language model (LLM) inference by verifying multiple draft tokens in a single target-model forward pass. The resulting benefit depends on the ability of the drafter to approximate the target model's distribution. In this work, we study Speculative Rejection Attacks (SRAs), a novel class of attacks that cause draft and target models to disagree more often, resulting in fewer draft tokens being accepted per draft cycle. This leads to more target model forward passes needed per generated token, slowing down inference and increasing costs for the victim. We introduce two attacks which append an adversarial suffix to attacker-controlled content to degrade speculative decoding on a victim's prompts. Both attacks optimise the expected length of the accepted speculative prefix, estimating per-depth acceptance from the target's probability of the drafted proposals (Speedbump-P) or from the overlap between the draft and target distributions (Speedbump-D). In some cases, attacks degrade speculative decoding to the point of being slower than autoregressive decoding. The degradation reduces the output quality - regularisation restores output quality but gives up most of the degradation, trading effectiveness for stealthiness. Additionally, the suffixes remain effective under sampling, and transfer across drafters (Speedbump-P) or across target models sharing a drafter (Speedbump-D). These findings identify the draft-target interaction of speculative decoding as a realistic attack surface through which adversarial inputs can inflate inference costs.

0.14

SpecGuard: Inference-Time Backdoor Detection For Free

cs.CR cs.CL ·2026-09-10 ·Rui Wen, Ahmed Salem, Andrew Paverd, Mark Russinovich, Zheng Li
similarity 0.73
Abstract

Large language models are often fine-tuned, shared, or downloaded from third parties, so a deployed model may carry a hidden backdoor that behaves normally on benign inputs but switches to attacker-controlled behavior when a secret trigger appears. While backdoors can be audited before deployment, runtime monitoring remains important for models that are frequently updated. The challenge is that LLM serving is latency-sensitive: existing inference-time detectors either rely on assumptions about the trigger form, which can fail on stealthy attacks, or require extra model computation, such as input perturbations or an additional generation pass. We introduce SpecGuard, an inference-time backdoor detector that repurposes speculative decoding at zero added model-computation cost. Speculative decoding speeds up inference by using a small draft model to propose tokens and a target model to verify them. We observe that this verification process already exposes a useful signal: when a backdoor is triggered, the target model shifts toward the attacker's behavior, while a clean draft model does not predict this shift, causing the draft-token acceptance rate to change. We formalize when this signal appears and show that an attacker who suppresses it must also weaken the backdoor. Across diverse backdoor types and model families, SpecGuard reliably detects triggered behavior, including stealthy cases where input-level filters are blind, while avoiding the extra generation cost of existing runtime detectors. Speculative decoding therefore doubles as a free, always-on signal for detecting backdoored LLM behavior.

0.20

Beyond the Prompt: Leveraging Pre-Decoding States for Jailbreak Detection in dLLMs

cs.CL cs.CYcs.LG ·2026-11-06 ·Adam Hazimeh, Amel Abdelraheem, Ke Wang, Mariam Salman, Ljiljana Dolamic +2 more
top venue similarity 0.70
Abstract · Published at NeurIPS 2026

Diffusion large language models (dLLMs) have recently emerged as a strong alternative to autoregressive models, generating responses by iteratively refining masked tokens in parallel rather than decoding sequentially. While enabling more efficient and flexible inference, dLLMs remain vulnerable to jailbreak attacks, including recent attacks that exploit properties unique to dLLMs such as bidirectional conditioning and parallel masked-token refinement. In this work, we show that these same properties also expose a safety-relevant detection surface absent from standard autoregressive decoding: even when a jailbreak is difficult to identify from prompt representations alone, it can still be detected from hidden states over masked response positions before any tokens are generated. By training linear classifiers on prompt and pre-decoding response representations, we empirically show that neither view strictly dominates, with each detecting attacks that the other misses. We introduce $\texttt{ReFuse}$ (Representation Fusion), an inference-time detector that fuses the sigmoid harmfulness scores of the two classifiers. Without modifying model weights or the decoding procedure, $\texttt{ReFuse}$ reduces average ASR across multiple jailbreaks from 63.29% for the undefended model and 11.27% for a prompt-only classifier to 3.31%, while keeping average benign refusal on standard utility benchmarks below 1% on LLaDA-8B. Together, these results establish $\texttt{ReFuse}$ as a lightweight jailbreak detector for dLLMs that improves safety beyond prompt-only detection.

0.27

PV-Decoding: Progressive Verification Decoding with Decode Gating for Diffusion Language Models

cs.CL ·2026-10-17 ·Renxi Liu, Yiming Li, Shengyin Sun, Chen Chen, Xian Wang +6 more
top venue similarity 0.68
Abstract

Discrete diffusion language models (dLLMs) offer an attractive alternative to autoregressive generation by updating multiple tokens in parallel, but their inference efficiency is still limited by the cost of safely committing tentative predictions. In particular, speculative decoding for dLLMs is challenging because speculative tokens within the same diffusion block may depend on one another, making aggressive acceptance prone to error propagation and strict verification computationally expensive. We present PV-Decoding, a confidence-driven speculative decoding framework with progressive verification for block diffusion inference. PV-Decoding partitions masked positions into directly decoded tokens, speculative tokens, and unresolved tokens using two confidence thresholds, and then verifies speculative tokens with progressively stronger policies, including single-batch, dual-batch, and multi-batch verification. This design exposes a practical accuracy--efficiency trade-off: weaker verification minimizes overhead, whereas stronger verification improves acceptance precision and robustness. Experiments on three diffusion language models across GSM8K, MBPP, and HumanEval show that PV-Decoding reduces sequential model forward passes (MFPs) by 8%--37% relative to confidence-based decoding, while keeping the largest observed accuracy drop to 1.3%. On Dream-7B-Instruct/GSM8K, PV-Decoding (1-batch) and PV-Decoding (2-batch) improve throughput by 7.0%--13.6% under the same hardware budget, whereas PV-Decoding (multi-batch) is slower under the current runtime. These results suggest that confidence-guided speculation with structured verification is a practical path toward efficient and reliable dLLM inference.

0.32

RCSD: Reinforcement and Continual Learning for Domain-Specific Speculative Decoding

cs.CL ·2026-10-21 ·Mingkang Liu, Weiming Meng, Peipei Jiao, Jiawei Zhang, Tianyuan Liu +2 more
similarity 0.68
Abstract · 9 pages, 3 figures

Speculative decoding accelerates large language model inference by employing a compact draft model to propose candidate tokens that are verified in parallel by a target model. Conventional training relies on soft-label distillation, which forces the draft model to mimic the target's full output distribution, including high-entropy regions that degrade acceptance rates and increase early rejection risk. We propose RCSD (Reinforcement and Continual Learning for Speculative Decoding), a training framework that aligns draft model optimization with the system-level objective of maximizing acceptance length. RCSD leverages naturally occurring accepted and rejected sequences during speculative inference to construct implicit preference pairs, with masked loss to avoid penalizing target-aligned tokens. Evaluated across multiple benchmarks, RCSD improves average acceptance length by 35% over HASS and achieves 1.35x faster end-to-end inference than HASS on practical workloads, without compromising generation quality.

0.13

Acceptance-Aware Draft Model Training for Speculative Decoding

cs.LG ·2026-09-21 ·Tianhua Xia, Mugilan Ganesan, Yifei Feng, Haiyu Wang, Maximilian Egger +1 more
highly cited similarity 0.67
Abstract

Speculative decoding accelerates large language model (LLM) inference by using a lightweight draft model to generate multiple candidate tokens that are verified by the target model in a single forward pass. Its speedup is largely determined by the acceptance length, yet existing draft-model training methods mainly optimize cross-entropy or Kullback-Leibler (KL) divergence as proxies. These objectives encourage distribution matching but do not directly optimize acceptance length, and the acceptance mechanism also differs between greedy and sampling-based decoding. In this work, we propose acceptance-length-aware training losses that directly optimize the expected number of accepted tokens within a speculative window. For greedy verification, we derive an expected accepted length (EAL) loss that explicitly maximizes expected acceptance length. For sampling-based decoding, we introduce a window total variation (WTV) loss that optimizes the overlap between temperature-scaled draft and target distributions while accounting for sequential acceptance dependencies. Both objectives can be further combined with a group-relative reinforcement learning stage (GRPO) using simulated acceptance length as the reward. Experiments across different target and draft models, tasks, and decoding settings show that our losses consistently improve acceptance length over KL-based training. WTV provides particularly strong gains under sampling-based decoding, while EAL better matches greedy verification. These results show that directly optimizing the acceptance objective, with losses tailored to the decoding mode, is more effective than conventional distribution-matching objectives.

0.38

FragToken: Amplifying LLM Inference Costs through Noncanonical Token Generation

cs.CR ·2026-09-25 ·Zihan Wang, Rui Zhang, Xinyuan Qian, Qingchuan Zhao, Hongwei Li +1 more
benchmark similarity 0.67
Abstract

As large language model (LLM) inference becomes increasingly expensive, resource-consumption attacks pose a growing threat to model providers. Existing attacks typically amplify cost by inducing abnormally long or repetitive outputs on attacker-controlled or triggered requests, making them easier to detect and limiting their deployment-wide impact when benign traffic dominates. In this work, we uncover a previously overlooked token-level attack surface arising from the many-to-one mapping from token sequences to decoded text. Although standard LLMs predominantly generate the canonical token sequences induced by their tokenizers, the same text can also be represented by substantially longer non-canonical sequences. This representational flexibility exposes a new avenue for resource-consumption attacks: an attacker can train the model to favor such sequences, systematically increasing the number of autoregressive decoding steps without a proportional increase in visible response length. However, we empirically find that directly maximizing token fragmentation substantially degrades model utility, producing conspicuous answer-quality failures that undermine attack stealthiness. To address this challenge, we propose FragToken, a training-time framework that combines source-model self-distillation, capacity-aware filtering and budgeting, and BPE-Aligned Merging to induce fragmented generation under ordinary prompts while largely preserving model utility. We evaluate FragToken on four LLMs across three benchmarks. Across the four models, FragToken achieves a three-benchmark average token inflation ratio (TIR) ranging from 1.99 to 2.46, while causing only minor degradation in model utility. Our work reveals a covert LLM supply-chain threat that increases inference cost without requiring large volumes of attack requests while largely preserving utility.

0.12

The Model's Tell: Measuring Context-Leakage Attack Signals with Behavior Gauges

cs.CR cs.AI ·2026-08-18 ·Maosen Zhang, Jianshuo Dong, Boting Lu, Wenyue Li, Xiaoping Zhang +3 more
code/data similarity 0.66
Abstract · Preprint

LLMs increasingly rely on external contexts, such as pre-defined system prompts or retrieved documents, to improve generation quality. However, processing these contexts alongside user queries creates an attack surface: adversarial inputs can induce models to disclose them. Prior probing studies suggest that leakage-related signals emerge in hidden states, yet the need to extract these states poses additional deployment challenges. In this paper, we explore whether this internal signal leaves a more accessible ``tell'' before decoding. We propose LeakGauge, which probes this response by appending a suffix that gauges leakage behavior and mapping its prefill token probabilities to an attack-risk score. While a direct gauge uses the initial tokens of confidential content, we find that a content-agnostic one that verbalizes leakage behavior yields more robust signals. Across 11 LLMs, including GLM-5.2 (753B) and Kimi-K3 (2.8T), LeakGauge reaches an AUROC range of 0.944--0.996 on unseen attacks. The signal remains stable when the content changes language or the attack shifts from verbatim to semantic disclosure. By activation-steering interventions, we further show that the risk score is sensitive to an internal leakage-related direction, relating the observable signal to the model's internal representation. In addition, LeakGauge enables an input detector with fewer than 0.5K extra parameters and added latency of 10.34 ms. Code: \href{https://github.com/yeasen-z/LeakGauge}.

0.55