CS Paper Radar

DepthWorld: 3D World Model for Robot Manipulation

Jai Bardhan, Josef Sivic, Vladimir Petrik

cs.RO cs.AIcs.CV ·submitted 2026-10-06 17:59 UTC · v1
publishedcode/data

Abstract

World models offer a data-driven alternative to traditional simulators for robotics, with applications spanning policy evaluation, improvement, and planning. All of these uses depend on faithful 3D geometry, yet current video-based world models are trained on RGB alone and produce rollouts that look correct frame-by-frame but do not compose into a consistent 3D world. Closing this gap requires progress on two fronts: large-scale 3D supervision for manipulation, and an architecture that can absorb it without disturbing strong pretrained video priors. We introduce a calibration pipeline that combines learned stereo depth with a joint factor graph, pooling all episodes collected from the same physical robot to recover its shared kinematic parameters alongside per-scene extrinsics. Applied to the DROID dataset, this yields DROID-3D, a calibrated 3D dataset providing dense metric depth and recalibrated multi-view extrinsics (achieving <0.7 px reprojection error on 90% of episodes for external cameras). We then train DepthWorld, a Stable Video Diffusion-based world model that jointly predicts multi-view RGB and depth via spatial latent tiling, leaving the pretrained Variational Autoencoder (VAE) unchanged. Depth supervision improves RGB prediction itself by +1.48 dB PSNR over an identical RGB-only baseline at equal training budget, while simultaneously yielding accurate metric depth for downstream geometric reasoning.

Comment
Accepted at the Conference on Robot Learning (CoRL) 2026. Project page: https://www.jaibardhan.com/depthworld. 32 pages including supplementary material, 15 figures, 7 tables

Closest papers

Nearest neighbours by meaning across the whole index.

DepState-JEPA: Learning Depth-Grounded State Representation for Visual Perception and Manipulation

cs.RO cs.CV ·2026-10-21 ·Xiujian Liang, Liuyuan Na, Zehao Du, Jiacheng Xu, Weixi Song +4 more
code/data similarity 0.79
Abstract

Predictive representations for robot manipulation should connect scene geometry with the state changes induced by actions. Our intuition is that understanding what an action will change starts with understanding where things are: complementary RGB and depth observations ground a common scene representation from which to infer those changes. Guided by this intuition, we introduce DepState-JEPA, a dual-stream RGB--Depth joint-embedding predictive architecture that connects spatial understanding with action-conditioned prediction through a shared latent state, DepState. Built on V-JEPA~2.1, the framework uses depth both as a complementary observation stream and to ground both modalities in metric 3D space, aggregating shared information into DepState while retaining modality-private features for decoding. Ray-conditioned readouts predict local features without target depth; after an action-conditioned transition, the same decoders predict future RGB and depth features using the predicted state and fixed initial private features. Robot-state readouts provide recursive proprioceptive inputs; object-trajectory supervision and calibrated forward kinematics shape state learning through motion targets and joint--TCP consistency. Comparisons show stronger RGB-encoder transfer after RGB-D adaptation, feature completion, conditioned visual forecasting, and manipulation success. Within-model ablations identify contributions from depth content, metric coordinates, and future-state matching, with additional control gains from FK regularization. The project page is available at https://shawnleung-sii.github.io/depstate-jepa/.

0.26

ObjectWorld: Scaling Object-Centric World Models with A Large-Scale 3D Full-Object Flow Dataset

cs.RO ·2026-11-08 ·Haonan Chen, Sicheng Isabella Lu, Haitian Li, Jiajin Wu, Hexiang Wei +7 more
dataset similarity 0.79
Abstract

Generative world modeling from large-scale visual data offers a promising path toward scalable robot manipulation. This calls for an intermediate representation that can be supervised at scale and remains actionable for downstream control. We propose 3D full-object flow, an object-centric motion representation that assigns dense 3D trajectories to points across the complete surface of a target object, including its occluded regions. By extending visible-surface object flow to the full object geometry, this representation makes complete object motion explicit and applies uniformly to both rigid and deformable objects. To realize the potential of this representation at scale, we introduce a 1210-hour full-object flow dataset that addresses the scarcity of large-scale supervision for complete 3D object motion. The dataset integrates diverse real-world videos and physical simulations, with a scalable annotation pipeline for recovering full-object motion from real-world observations and quality metrics for systematically assessing annotation quality. We then train a world model that takes an image and a task description as input and predicts dense full-object flow over the reconstructed object geometry. Experiments show reliable annotation quality, data-scalable flow prediction, and effective downstream manipulation across novel scenes and robot embodiments. Project website with additional results and videos: https://nus-lins-lab.github.io/ObjectWorld/.

0.49

Spatially Aware World Action Model via Geometric Latent Diffusion

cs.CV cs.RO ·2026-09-02 ·Javier Alejandro Lopetegui Gonzalez, Paul Pacaud, Cordelia Schmid
highly cited similarity 0.78
Abstract

World Action Models (WAMs) leverage the capabilities of large-scale pretrained video diffusion models to jointly predict future observations and actions, inheriting rich visual and physical priors from internet-scale video. This has made them a promising paradigm for robot policy learning, yet the prevailing models operate exclusively on RGB observations and do not leverage 3D information. To bridge this gap, we introduce a Spatially Aware World Action Model (SA-WAM), which repurposes a pretrained video model for joint action, RGB, and depth prediction, enabling 3D-aware world modeling and action prediction within a single diffusion backbone. We use a nonlinear encoding that maps the unbounded depth signal into the bounded input domain expected by the frozen VAE tokenizer. This allows us to reuse the tokenizer without 3D-specific fine-tuning, incorporating geometric information without sacrificing the pretrained priors. SA-WAM achieves state-of-the-art results on the RoboCasa and LIBERO-Plus benchmarks, while simultaneously improving future-state predictions. Furthermore, SA-WAM outperforms strong baselines in real-world evaluation using a UR5 robotic arm, with strong gains in randomized environments. We analyze the correlation between world model prediction quality and rollout success, providing insights into WAM performance and avenues for its improvement.

0.37

GeomVLA: Unifying Scene, Motion, and Action in 3D

cs.RO ·2026-09-12 ·Ziyin Xiong, Nikolaos Gkanatsios, Moritz Reuss, Katerina Fragkiadaki
publishedcode/datahighly cited similarity 0.78
Abstract · Accepted to CoRL 2026. Project page: https://ziyin-xiong.github.io/geomvla.io/

We present GeomVLA, a Vision-Language-Action (VLA) model that unifies perception, latent scene motion prediction, and action generation within a shared robot-centric 3D coordinate frame. Our approach lifts pretrained VLM features into spatially grounded 3D scene tokens using depth and camera calibration, while retaining the semantic representations learned during VLM pretraining. We further introduce a 3D Scene Trajectory Denoiser, a task-conditioned module that learns a latent representation of how scene points are expected to move in 3D. Rather than executing the predicted trajectory as an open-loop plan, GeomVLA extracts intermediate motion tokens from the trajectory denoiser and uses them to condition a 3D flow-based action denoiser through geometry-aware attention. GeomVLA achieves state-of-the-art performance on CALVIN, competitive performance on LIBERO and RoboTwin2.0, and outperforms strong baselines in real-world manipulation settings without robot-action pretraining. Extensive ablations show that future-motion reasoning alone is insufficient: the primary gains are associated with maintaining geometric consistency among scene representation, motion prediction, and robot actions throughout the perception-to-action pipeline.

0.57

3DROID: A Renderable 3D Gaussian Dataset with Measured Per-Scene Reliability

cs.CV cs.RO ·2026-10-01 ·Wonguen Cho, Junhoo Lee, Nojun Kwak
datasetcode/data similarity 0.77
Abstract · 12 pages, 3 figures

Robot manipulation models primarily reason from 2D observations while acting in the 3D physical world. To bridge this gap, recent work has augmented robot data with geometric priors such as depth, point clouds, and 3D trajectories, while renderable 3D Gaussian representations provide another promising form of 3D supervision. However, 3DGS representation is designed mainly for photometric fidelity and may not preserve real-world metric scale, particularly when the supplied camera extrinsics are unreliable. We study the effect of extrinsic reliability and pose conditioning on feed-forward 3DGS, and propose a calibration-aware pipeline that anchors reconstructed scenes to the robot's metric workspace. Our experiments show that pose conditioning improves novel-view fidelity, while its geometric benefit depends on the reliability of the injected extrinsics. Using this pipeline, we present a renderable, metric-pose-anchored dataset with scene-level reliability information for robot manipulation research. Our dataset is available at https://huggingface.co/datasets/wonguen/3DROID

0.30

PointZero: 3D Point Track Completion for Learning Transferable 3D Dynamics

cs.CV cs.RO ·2026-09-16 ·Bardienus P. Duisterhof, Kaifeng Zhang, Adam Hung, Bowen Wen, Stan Birchfield +3 more
benchmarkdatasethot directionhighly cited similarity 0.77
Abstract · https://pointzero-wm.github.io/

World models endow perceptual systems with the ability to predict how scenes evolve under interaction. They are most beneficial when trained on diverse volumes of data, to instill a rich prior into downstream applications. Existing methods typically require robot action labels to learn action-conditioned 3D dynamics, which excludes web video data from the training pool. We study 3D point track completion as a pre-training objective for learning transferable 3D dynamics without robot data. Given a single RGB-D observation and sparse partial 3D trajectories (tracks), we predict future 3D tracks of all observed points. We show this objective produces a rich 3D dynamics prior, without requiring robot action labels. We contribute a diverse dataset of 2.9 million synthetic frames spanning deformable, articulated, and rigid objects, and use it to train PointZero. We show that a flexible and expressive transformer, PointZero, outperforms prior methods on the same data. We demonstrate the utility of our pre-training objective by post-training PointZero for two downstream applications: (1) action-conditioned 3D dynamics prediction and (2) imitation learning. When fine-tuned to condition on end-effector pose, PointZero outperforms the baselines on the recent PGND 3D dynamics benchmark. When fine-tuned to predict robot actions and 3D tracks, PointZero outperforms or matches the baselines on 6/7 simulated and real-world robot manipulation tasks. We furthermore evaluate training PointZero from scratch to isolate the benefits of our proposed architecture from those of our proposed pre-training objective and dataset. We release the dataset, checkpoints, and full training recipe.

0.53

ExStereo: Lifting 2D Vision-Language-Action Models to 3D with Explicit Stereo Representations

cs.RO cs.CV ·2026-10-03 ·I-Chun Arthur Liu, Jason Chen, Gaurav S. Sukhatme, Daniel Seita
similarity 0.77
Abstract

Three-dimensional perception is critical for robotic manipulation, particularly for high-precision tasks, as recovering metric depth and precise 3D object positions from monocular RGB observations is inherently ill-posed. However, many Vision-Language-Action (VLA) models rely solely on RGB observations for perception. Leveraging recent advances in foundation models for stereo matching, we introduce ExStereo, a stereo module that augments pre-trained 2D VLAs with 3D perception. ExStereo reconstructs scene geometry from stereo image pairs and renders multi-view observations as an explicit stereo representation for stereo feature extraction. The action tokens from the action expert selectively attend to the resulting stereo tokens through our proposed action-stereo cross-attention mechanism, enabling the policy to generate robot actions conditioned on 3D scene information. To learn robust 3D representations, we introduce a mid-training stage before task-specific post-training, using a self-supervised learning objective on large-scale stereo data. We validate our approach by fine-tuning two publicly available VLAs, $π_{0.5}$ and SmolVLA, and evaluate them in simulation and on a real-world bimanual PiPER platform. Across both settings, VLAs fine-tuned with ExStereo consistently outperform baselines, demonstrating the effectiveness of stereo perception for robotic manipulation. Our project website is at: https://exstereo-vla.github.io/ExStereo/.

0.47

UniFlowWAM: A Unified World-Action Model with Visual Semantics and 4D Geometry

cs.RO ·2026-10-22 ·Jialin Tian, Zhuofan Li, Xinkai Wang, Bokai Lin, Chenyi Wang +3 more
code/data similarity 0.77
Abstract · 14 pages, 5 figures, 4 tables. Project page: https://kksham111.github.io/UniFlowWAM_ProjectPage/

Robot demonstrations record what the robot saw and what it did. They do not specify how the 3D world changed in between. Scene-level 3D flow describes it by tracking 3D scene points, providing the world representation with 4D geometry. Prior work has used flow to improve robot policies. Flow served as an intermediate prediction that a separate model converts into actions, as a prior injected at inference time, or as an extra output learned together with the action. In all of these designs, flow stays outside the policy, as a separate module or as an extra prediction head. We introduce UniFlowWAM, a Unified World-Action Model that makes 3D scene flow a third modality on par with vision and action. Its world representation therefore covers both visual semantics, through future visual features, and 4D geometry, through 3D flow, and flow receives its own supervision. UniFlowWAM is a diffusion transformer with one expert per modality, and the three experts exchange information through joint attention. We train UniFlowWAM under a ten-objective role grid, where each objective assigns every modality exactly one of three roles, namely target, condition, or absent. The same model thus serves as a policy, as forward and inverse dynamics, and as a predictor of future visual features or 3D flow. We evaluate UniFlowWAM on RoboCasa-GR1, LIBERO, and LIBERO-Plus in simulation, and on four real-world bimanual manipulation tasks. On RoboCasa-GR1, UniFlowWAM raises the success rate of its base model without flow from 52.1% to 56.4%. It preserves in-distribution success on LIBERO at 98.1% and reaches 87.7% zero-shot on LIBERO-Plus. On the real robot, it achieves 87.0% average success, compared with 68.5% for the strongest baseline.

0.30