CS Paper Radar

ORACLE: Optimizer-Relative Alignment for Constrained LEarning

Utkarsh Grover, Wyatt Mackey, Kaixun Hua, J. Morris Chang, Xiaomin Lin

cs.LG ·submitted 2026-10-06 19:41 UTC · v1

Abstract

Constraint handling methods typically intervene before the optimizer acts, by modifying the objective or the gradient. Yet momentum, adaptive scaling, and structured preconditioning can substantially reshape that signal before it becomes a parameter update. We formulate optimizer relative constrained learning, where constraint compatibility is assessed on the post optimizer update. Building on this view, we introduce ORACLE, which evaluates the native optimizer's realized step through a joint endpoint linearization of heterogeneous constraint families, constructs the resulting alignment in the optimizer's own geometry, bounds its authority, and commits it only after validation. We evaluate ORACLE across eight Partial Differential Equation benchmarks and four optimizers spanning Euclidean, diagonal adaptive, and structured preconditioned geometries, where it improves or matches native optimizer in 94% of configurations. Cross model analysis shows the same behavior in 92% of configurations, while matched comparisons show improvements over alternative constraint-handling methods acting at the objective, gradient, and post-optimizer levels.

Closest papers

Nearest neighbours by meaning across the whole index.

Learned Preconditioning for a Primal-Dual Interior-Point Method

cs.LG math.OC ·2026-09-28 ·Abhinav Madabhushi, Jialin Liu, Minxin Zhang
similarity 0.68
Abstract

Interior-point methods (IPMs) are among the most widely used algorithms for constrained optimization, yet their Newton-based search directions require costly second-order information and large linear-system solves. Learning to optimize offers cheaper updates learned from data, but the singular behavior of logarithmic barriers near constraint boundaries makes IPMs highly sensitive to perturbations, complicating both warm starting and learning reliable updates. We introduce pdLIP, an IPM for smooth nonlinear programs that integrates learned preconditioning with pdProj, an all-shifted primal-dual projected-search IPM. A shared coordinate-wise recurrent network predicts a positive diagonal preconditioner that scales the right-hand side of the reduced Newton system for the primal step, and the remaining slack and multiplier directions are recovered analytically. The learned iterations avoid Hessian evaluations and Newton-system solves, using only first-order and coordinate-wise operations amenable to GPU parallelization. Training is self-supervised, with a loss based on a penalty-barrier merit function and the residual of perturbed optimality conditions, requiring neither target directions nor precomputed solutions. Primal and dual shifts mitigate the barrier's sensitivity to perturbations near constraint boundaries, enabling effective warm starting. Across four classes of 200-dimensional convex and nonconvex constrained problems, pdLIP warm starts reduce pdProj refinement iterations by 63-67% compared with cold starts at the same KKT residual tolerance of $10^{-8}$, with negligible warm-start generation cost relative to the subsequent pdProj solve. Improvements persist on box-constrained QPs with 1000 variables and extend to applications including portfolio optimization, support vector machines, and a nonlinear control example.

0.31

Accelerating Floating-Point Satisfiability Solving via Gradient Normalization

cs.AI cs.LG ·2026-09-14 ·Yuanzhuo Zhang
similarity 0.64
Abstract

Satisfiability Modulo Theories (SMT) solvers are foundational to software verification, program analysis, and compiler testing, particularly over the theory of Quantifier-Free Floating-Point (QF_FP). While recent optimization-based SMT solvers have successfully applied gradient descent to continuous relaxations of logical formulas, they are fundamentally bottlenecked by gradient domination, a phenomenon where a small subset of difficult clauses hijacks the optimization trajectory, preventing the solver from satisfying the broader formula and trapping it in local minima. To overcome this, we present GradSAT, a novel framework that bridges optimization-based SMT solving with Multi-Task Learning (MTL). GradSAT reformulates the constraint satisfaction process by treating each SMT clause as an independent MTL task. By applying dynamic gradient normalization (GradNorm), GradSAT actively balances the gradient magnitudes across all clauses at runtime, systematically penalizing dominant gradients and accelerating lagging clauses to ensure uniform convergence. GradSAT implements this through a highly optimized, two-stage hybrid pipeline. First, a GPU-accelerated PyTorch backend leveraging symbolic compilation and operator fusion navigates the continuous relaxation to a high-quality basin. Second, the candidate assignment is handed off to a bit-precise local search engine to rapidly resolve the exact, rigorous assignment. By stabilizing the continuous search dynamics, GradSAT mitigates the brittleness of prior gradient-based solvers and provides a robust, highly parallelizable architecture for complex constraint solving.

0.23

dOPT: Differentiating Conic Optimization via Geometric Reduction

cs.LG math.OC ·2026-09-27 ·Fengyu Yang, Connor W. Magoon, Tyler Watts, Shahar Z. Kovalsky
similarity 0.64
Abstract

Optimization layers enable the incorporation of structured constraints and decision problems into learning systems. Training such systems requires differentiating through the embedded optimization problem, which can be challenging for general conic programs. We introduce dOPT, a solver-agnostic framework that, rather than differentiating the full conic formulation, reduces it at a computed primal-dual solution to an equality-constrained quadratic program that preserves the reference solution and its first-order sensitivity. The reduction captures the local first- and second-order conic geometry relevant to differentiation and remains well defined at singular configurations. Computing solution derivatives then requires a single symmetric linear solve, independently of the forward solver. We derive explicit reductions for convex NLPs, QPs, SOCPs, and SDPs. Numerical experiments validate the computed gradients and show favorable backward-pass scalability, with substantial speedups over existing differentiable conic optimization methods as problem size increases.

0.27

Towards learning-enhanced solvers for multi-parametric optimization

eess.SY math.OC ·2026-10-12 ·Dieter Teichrib, Fabian König, Moritz Schulze Darup
published similarity 0.63
Abstract · 8 pages, 3 figures, to be published in the proceedings of the 65th IEEE Conference on Decision and Control (2026)

Neural networks (NNs) have been employed in various ways to accelerate the solution of multi-parametric optimization problems (OPs), which prominently arise in model predictive control (MPC). Early approaches focused on approximating the parametric solution (e.g., the optimal control law) directly by NNs. More recently, learning-based techniques have been used to emulate or enhance solver iterations. For the direct approximation of the parametric solution, it has been demonstrated that exploiting structural properties of the underlying OP facilitates the design of suitable NN architectures. In this paper, we show that structural analysis can also be leveraged to systematically integrate learning into classical optimization algorithms, thereby enhancing their performance. We formalize our concept for the case of multi-parametric quadratic programs (mpQPs), which frequently arise in linear-quadratic MPC, as a representative application. More precisely, we demonstrate that tailored NNs enable a parameter-dependent fine-tuning of the step sizes in a standard dual projected gradient scheme. The design of the NNs is guided by the observation that optimal step sizes, which permit obtaining the exact optimal solution in finitely many iterations, are piecewise constant functions over the parameter space (e.g., the state space in MPC). We establish key theoretical properties of the proposed approach and illustrate its effectiveness in a numerical case study.

0.22

MOON: Multi-Objective OrthoNormalized Updates for Multitask Learning

cs.LG cs.AIstat.ML ·2026-08-12 ·Shiji Zhou, Kunlin Lyu, Lei Zhang, Ruodong Wang, Yifan Sun
code/data similarity 0.63
Abstract

Multi-objective optimization (MOO) has demonstrated significant success in multi-task learning by mitigating task conflicts through gradient manipulation. However, most existing methods flatten model parameters into vectors and perform gradient manipulation under Euclidean geometry, thereby overlooking the matrix structure prevalent in modern architectures such as Transformers. In this paper, we show that gradient manipulation in Euclidean space does not generally yield the steepest descent direction under matrix geometry, potentially limiting optimization efficiency. Drawing from the theory of steepest descent for matrix-valued parameters, we propose MOON (Multi-Objective OrthoNormalized Updates), which performs gradient manipulation under spectral--nuclear norm geometry and uses the orthonormalized manipulated gradient for parameter updates. Theoretically, for smooth non-convex objectives, we establish convergence of the averaged Pareto-stationarity measure at rates of $\mathcal{O}(T^{-1/2})$ in the deterministic setting and $\mathcal{O}(T^{-1/4})$ under stochastic gradients. Empirical results across various benchmarks show that MOON consistently improves both optimization efficiency and final multi-task performance. Our code is available at https://github.com/KunlinLyu/MOON.

0.60

CATune: Structural Constraint-Aware Bayesian Optimization for DBMS Configuration Tuning

cs.DB cs.LG ·2026-10-07 ·Fangping Lan, Qi Zhang, Eduard Dragut
similarity 0.63
Abstract · 14 pages including references, 10 figure, 2 tables. Accpeted by PVLDB, Volume 19, 2026

Modern DBMSs expose hundreds of configuration knobs, resulting in a high-dimensional and heterogeneous search space that makes automated tuning costly. Existing ML-based tuning systems typically treat the configuration domain as box-constrained and rely on workload feedback to implicitly capture inter-knob relationships. However, DBMS documentation specifies deterministic knob dependency constraints, particularly ordering constraints, that characterize structurally valid regions of the configuration space. We present CATune, a constraint-aware Bayesian optimization (BO) framework that models deterministic inter-knob ordering constraints as structural components of the search domain. Instead of learning feasibility boundaries through sampled violations, CATune performs optimization within a constraint-consistent subspace. We develop a topology-aware sampling strategy that respects dependency structure during exploration and avoids the inefficiencies of post-hoc constraint handling. To enable automated constraint discovery, we further design a precision-first extraction pipeline that combines LLM-based parsing with reliability safeguards to mitigate hallucinated dependencies. Experiments on PostgreSQL and MySQL using TPC-C and TPC-H workloads show that CATune substantially improves both sample efficiency and final tuning quality across surrogate models and BO frameworks. Under default ranges, CATune reaches the baseline optimum up to 12.5x faster and improves throughput by up to 63.37%. The improvements persist under knowledge-guided reduced ranges and alternative optimization implementations. These results demonstrate that explicitly modeling system-defined deterministic ordering constraints enhances optimization robustness and system stability.

0.41

TACIT: Optimization Models that Learn from Their Mistakes

cs.AI math.OC ·2026-09-29 ·Maxime Bouscary, Marco Molinaro, Sirui Li, Saurabh Amin, Ishai Menache +1 more
similarity 0.62
Abstract

Real-world optimization problems are difficult to model accurately because many objectives and constraints reside in domain experts' tacit knowledge, making them hard to formalize. As a result, optimization models often contain miscalibrated objectives, missing constraints, or omitted decision variables, leading to solutions that fail to reflect operational realities. We address this challenge by automatically repairing misspecified formulations using historical data consisting of past solutions and subsequent user overrides. Traditional approaches such as inverse optimization and constraint learning tend to overfit sparse data and produce complex formulations. Our central idea is to combine the reasoning capabilities and prior knowledge of LLMs with the formal grounding provided by optimization. We realize this idea through two complementary paradigms. Top-down, an LLM proposes structural repairs, including new constraints and variables, whose numerical parameters are calibrated and validated through optimization. Bottom-up, optimization infers cuts from observed decisions, which the LLM contextualizes into interpretable, generalizable modeling constraints. We evaluate our approach on 38 misspecification scenarios spanning nine classes of optimization problems, several drawn from real-world applications, and show that TACIT can repair 78.9% of them (vs. 60.5% for the best baseline).

0.23

Convex-SKM-Net: Low-Latency Block Halfspace Corrections for Neural Convex Constraint Satisfaction

cs.LG cs.AImath.OC ·2026-10-28 ·Haoyu Zhu, Xiaochen Zhang, Qingchun Hou
benchmarktheory similarity 0.62
Abstract

Fast inference and strict constraint satisfaction are essential for learning-based decision-making. Existing methods often rely on constraint-specific projections or feasible-set parameterizations, while iterative repair can be costly. We introduce Convex-SKM-Net, a convex constraint-satisfaction layer that forms linearization halfspaces from residual and (sub)gradient oracles without constraint-specific inequality projectors. It applies fixed-depth dual projected-gradient descent (dual PGD) to minimum-displacement block problems using GPU-friendly matrix operations. We jointly learn the predictor and a positive-definite mobility, adapting the correction geometry to improve objective quality. We prove convergence of the outer iterates at fixed dual depth and linear convergence in distance under Slater's condition and bounded subgradients. All our test outputs on three second-order-cone model-predictive control (SOC-MPC) horizons and six power-system convex relaxations satisfy a $10^{-3}$ feasibility tolerance. Comparisons with the latest constraint-satisfaction methods show inference speedups of up to $144.3\times$ on SOC-MPC and $7.7\times$ on a convex quadratically constrained quadratic programming (QCQP) benchmark with joint training. On QCQP, the mean objective gap is $0.012\%$, with full test feasibility at $10^{-4}$. Learning mobility reduces the five-seed affine-task mean gap by $22.4\%$ and improves gaps in matched power-system comparisons.

0.10