CS Paper Radar

Denoising Blocks, Not Tokens: Efficient Compressed Continuous Diffusion with Branching Token Realization

Xinsong Feng, Peng Du, Zhizhuo Yang, Daniel M. Bikel, Jiayun Wang, Haipeng Chen

cs.LG cs.AI ·submitted 2026-10-07 02:08 UTC · v1

Abstract

Diffusion language models (DLMs) generate text through iterative parallel refinement, offering the potential for higher throughput than autoregressive (AR) decoding. However, most DLMs still maintain one generative state per token, so every denoising step processes a state sequence as long as the output sequence, limiting the throughput gains from parallel generation. Continuous DLMs provide an additional degree of freedom: a single continuous state can represent multiple tokens, allowing diffusion to operate on a much shorter latent sequence. We introduce \emph{Branching Latent Diffusion (BLD)}, which exploits this flexibility by compressing a 1024-token sequence into only 64 block latents, a $16\times$ reduction. BLD combines latent compression with \emph{branching token realization}, where each latent is decoded by a local AR branch and all branches run in parallel. Because strong compression makes joint latent generation difficult, BLD generates the latents in groups, conditioning each group on previously generated latents. In end-to-end evaluation on the same GPU, BLD reduces generation FLOPs by more than $80\times$ and increases throughput by more than $6\times$ relative to the similarly sized ELF-L baseline. Compared with the AR baseline, BLD achieves more than $6\times$ higher throughput and more than $4\times$ lower latency. Despite the compression, BLD maintains competitive local fluency and diversity, although long-range coherence remains challenging. Overall, BLD shows that moving diffusion from token-level states to compressed latent sequences can substantially improve the efficiency of long-sequence generation.

Closest papers

Nearest neighbours by meaning across the whole index.

How To Build A Modern Diffusion Language Model

cs.AI ·2026-10-24 ·Volodymyr Kuleshov, Marianne Arriola, Yair Schiff, Gilad Turok, Guanghan Wang
survey similarity 0.77
Abstract

The frontier of large language model (LLM) performance has advanced rapidly in recent years, fueled by scaling laws for pretraining on large text corpora. However, mainstream LLMs have fundamental limitations: they generate text autoregressively, producing outputs sequentially from left to right one token at a time. This sequential process leaves parallel GPU hardware underutilized during inference--a bottleneck that has grown acute as progress shifts toward scaling post-training and inference-time compute--and commits irreversibly to each token without the ability to revise earlier mistakes. Discrete diffusion models address these limitations by generating tokens in parallel, starting from a noisy or masked sequence and iteratively refining the entire output over a series of denoising steps. This parallel generative process enables speeds of thousands of tokens per second, provides a new axis of inference-time compute scaling, and supports built-in error correction and controllable generation. Over the past two years, discrete diffusion has scaled to billions of parameters across biological sequence modeling and natural language, with open-weights and commercial releases from leading labs. This article provides a survey of key ideas in discrete diffusion and a high-level introduction to how modern diffusion LLMs are built, covering their foundations, core algorithmic and architectural building blocks, applications in biology and language, and implications for future LLM scaling laws.

0.39

Distilled Continuous Diffusion Language Models Can Write Code in Few Steps---or One

cs.LG ·2026-09-03 ·Fred Zhangzhi Peng, Kaiwen Zheng, Anru R. Zhang
code/data similarity 0.74
Abstract · This manuscript is withdrawn to address institutional disclosure requirements concerning the research resources used in this work

Language generation is almost universally treated as a sequential process: autoregressive models emit one token at a time, while diffusion language models replace token-level seriality with a long trajectory of iterative refinement. In this work, we introduce PlaidQ, a 0.7B continuous diffusion language model for code generation, and show that its trajectory can be aggressively distilled into only a few denoising steps---or even one, enabling efficient code generation. PlaidQ repurposes a pretrained autoregressive model as a bidirectional denoiser over continuous token embeddings. We distill PlaidQ with distribution matching for few-step generation and paired-trajectory supervision for one-step generation. At matched model scale, PlaidQ is competitive with discrete diffusion language models on code generation. Distillation then shifts the quality--compute frontier: a 16-step student reaches 31.78 and 40.49 pass@10 on HumanEval and MBPP+, surpassing the same PlaidQ teacher sampled for 512 steps. At the extreme, paired-trajectory distillation achieves 7.07 pass@1 on HumanEval with a single denoising step, producing functionally correct programs. Together, these results establish continuous diffusion as a viable path to few-step and one-step code generation. Broadly, continuous diffusion is not merely another representation for language: it provides an interface through which language models can inherit the acceleration and distillation machinery of continuous diffusion modeling. Training and inference code and model checkpoints are available at https://github.com/pengzhangzhi/plaidq.

0.43

ALoDLM: Adaptively Looped Diffusion Language Models

cs.AI cs.LG ·2026-10-03 ·Liancheng Fang, Zhuowei Li, Youngeun Kim, Tianchen Zhao, Rajat Koner +8 more
benchmarktheory similarity 0.73
Abstract

Diffusion language models (DLMs) enable fast generation by predicting multiple tokens in parallel, but their practical adoption remains limited by a persistent quality gap relative to comparably sized autoregressive (AR) models. We attribute this gap to a computation-difficulty mismatch: within a partially observed sequence, some unknown tokens are easy to predict, while others require substantially more computation. Existing DLMs nevertheless apply uniform computational depth to all unknown positions at each denoising step. We introduce ALoDLM, which replaces uniform computation with token-adaptive latent recurrence. At each denoising step, ALoDLM iteratively refines latent representations and allocates computation according to token difficulty. Tokens ready to commit are fed back as discrete context, while unresolved tokens retain and further refine their latent states through additional recurrent passes. To learn token prediction and computation allocation jointly, we formulate token-wise computation schedules as latent variables and derive a conditional negative evidence lower bound (NELBO). We train ALoDLM at 1.7B and 8B parameter scales. Across eleven benchmarks, ALoDLM outperforms all evaluated DLMs and the corresponding AR baselines in average benchmark score at both scales. ALoDLM also retains fast parallel decoding, yielding a strong quality-efficiency trade-off among evaluated autoregressive and diffusion models under optimized inference engines.

0.41

DynaTE: Accelerating Diffusion LLMs via Dynamic Token Execution

cs.AR cs.AI ·2026-10-08 ·Minghan Jiang, Jiayi Wang, Shuaiting Li, Haibin Shen, Kejie Huang
similarity 0.72
Abstract

Diffusion-based LLMs (dLLMs) have recently emerged as a promising alternative to autoregressive (AR) LLMs by enabling bidirectional parallel refinement, alleviating the sequential decoding bottleneck of AR generation. However, their parallel iterative refinement mismatches AR accelerators optimized for sequential decoding and their discrete token generation differs from DiT accelerators designed for continuous denoising. Recent dLLM accelerators have explored workload-specific optimizations to reduce vocabulary processing overhead and redundant computation across denoising iterations. However, these approaches retain all tokens in parallel execution, despite varying token refinement utility and execution requirements. This paper presents DynaTE, a hardware--software co-design architecture that dynamically adapts accelerator execution to evolving token states during dLLM decoding. DynaTE first enables adaptive token execution by skipping low-utility token computation, while a dimension-reconfigurable PE array maintains high utilization under varying active-token patterns. Second, DynaTE exploits dynamic token dependencies through FLDD to refine a small number of locally dependent tokens within the current iteration, reducing the overall number of denoising iterations, while a Merge--Split--Merge dataflow hides the resulting serial overhead. Third, a streaming vocabulary engine interleaves multiple token streams from the LM head to accommodate irregular output variations caused by selective token computation and uneven vocabulary-selection demands. Evaluated on two representative dLLMs, DynaTE achieves 2.05--2.78$\times$ speedup and 2.99--3.93$\times$ higher energy efficiency over state-of-the-art dLLM accelerators, while delivering 2.55$\times$ speedup and 6.07$\times$ higher energy efficiency over Jetson AGX Orin.

0.19

Blurring the Block Boundaries: Overlapping Block Denoising for Efficient Diffusion Language Models

cs.CL cs.AI ·2026-11-10 ·Amir Mann, Jonathan Fhima, Shaked Brody, Or Avitan, Asif Zamir +2 more
similarity 0.71
Abstract

Diffusion Language Models (DLMs) have emerged as effective alternatives to autoregressive models for latency-critical tasks, enabling faster token generation. Recent advances employ block diffusion with self-editing capabilities, where each block refines tokens iteratively before advancing to the next one. Yet each block is only as fast as its slowest token, and the next block cannot start before it. We suggest Blurring the Block Boundaries (B3), a novel method with which two blocks are refined in parallel within a shared forward pass. B3 calibrates itself on the fly, opening the next block only once the model is ready to start generating it. It is a training-free and hyperparameter-free acceleration method which seamlessly integrates within any self-editing block diffusion model. Evaluated on state-of-the-art DLMs across 10 diverse datasets spanning varied tasks and difficulty levels, B3 results in on par generation quality and 11.5-14.5% speedup compared to the base model, pushing the Pareto frontier for latency-quality trade-offs in DLM inference.

0.05

The Hidden Cost of MoE Diffusion Decoding: Profiling and Fixing the Sampler

cs.LG cs.AIcs.CL ·2026-11-16 ·Harshit Samrat, Ramakrishna Paramahamsa Kompella
publishedbenchmarkcode/data similarity 0.71
Abstract · Accepted to NeurIPS workshop DiffuLM 2026

Masked diffusion language models (dLLMs) decode by iteratively denoising a full canvas of tokens, so every forward pass runs a per-token sampling and stopping pipeline over the entire canvas-by-vocabulary logits tensor. We profile single-user decoding of a 26B-parameter diffusion Mixture-of-Experts model on a bandwidth-bound edge accelerator (NVIDIA GB10) and report a result that is easy to miss: after weight quantisation, this logits pipeline, not the expert GEMMs, is the single largest consumer of decode time. Unlike autoregressive decoding, where sampling touches one position's logits per committed token, diffusion decoding processes S times as many logit entries per output token, where S is the number of denoising steps. We show this pipeline is largely redundant or fusable and remove it in two lossless tiers: a bit-exact tier whose output is byte-identical to the reference decoder, and an accuracy-parity tier using a fused single-pass entropy kernel and Gumbel-max sampling. Combined with a W4A16 expert kernel, the full stack reaches 2.4-2.7 times end-to-end speedup over bf16 at unchanged benchmark accuracy on GSM8K, HumanEval, and MATH, on a single 273 GB/s device. We confirm the finding on a second, independently built diffusion MoE (LLaDA2.0-mini: pipeline 28.8% of decode, fused W4A16 3.3 times at accuracy parity) and show it disappears on a dense diffusion model (3.6%). The cost is specific to MoE diffusion, where quantisation makes the backbone cheap. Code and quantised weights are released.

0.47

LED: Improving Masked Diffusion Language Models by Lookahead Editing

cs.LG cs.CL ·2026-10-16 ·Yuyan Zhou, Zeyuan Yang, Yuxuan Song, Zhicheng Cai, Hongli Yu +3 more
similarity 0.70
Abstract · 10 pages, 5 figures

Diffusion large language models (dLLMs) have emerged as a promising alternative to autoregressive language models, enabling non-autoregressive text generation through parallel decoding. Existing dLLMs can be broadly categorized into two families: masked diffusion models (MDMs) and uniform diffusion models (UDMs) In this work, we theoretically show that MDMs are easier to optimize due to their mask-based transition schedule but have lower computational expressivity, whereas UDMs enable iterative state revision and greater expressivity but are substantially harder to train. This trade-off raises a natural question: can we obtain the expressivity of iterative revision without giving up the simple, easy-to-optimize transition schedule of MDMs? Motivated by this analysis, we propose Lookahead Editing (\ours{}), which augments masked diffusion decoding with a rewritable proposal state. At each decoding step, the model performs several lookahead updates to iteratively refine future predictions in this proposal state before committing tokens to the masked sequence. This design introduces a rewritable proposal that uses additional compute to improve expressivity while keeping the simple mask-based transition schedule of MDMs. We fine-tune Qwen2.5-7B and Qwen3-8B to obtain LED-\texttt{7B} and LED-\texttt{8B}, respectively. Across eight benchmarks, LED SFT yields average gains of $+11.4$ and $+7.7$ points over standard MDM SFT. Moreover, using SFT alone, LED-\texttt{8B} outperforms LLaDA2.1-16B Q-mode, which is trained with continued pre-training, supervised fine-tuning, and reinforcement learning.

0.20

Denoising Hierarchical Representations: Joint Continuous Diffusion for Language Modeling

cs.CL cs.LG ·2026-10-06 ·Mathias Ollu, Nikos Komodakis
code/data similarity 0.70
Abstract · 27 pages, 10 figures

Diffusion Language Models (DLMs) hold the promise of order-agnostic, parallel text generation. Recently, continuous diffusion and flow matching models have seen substantial gains, driven by carefully crafted token representations and diffusion/flow spaces. In this work, we introduce Hierarchical Continuous Diffusion Language Models (H-CDLMs), a simple framework that further improves continuous DLMs with minimal compute and parameter overhead. Drawing on the discrete DLM and continuous image diffusion literature on joint diffusion, we diffuse multiple modalities in parallel. These modalities represent tokens at different semantic granularities: in our instantiation, the tokens themselves and coarser clusters obtained by clustering pretrained token embeddings. We propose a general setup that allows per-modality samplers and schedules to enhance the interplay between modalities. Applied to CoBit, this yields H-CoBit, which delivers large empirical gains across benchmarks. At dataset entropy, H-CoBit improves MAUVE and reaches a generative perplexity (GenPPL) of 49.4 on LM1B and 50.4 on OWT, improving on the baseline by 24.2 and 20.7 points and surpassing even discrete DLMs of comparable size. On GSM8K, it reaches 27.4% accuracy, outperforming prior continuous diffusion and flow-based models. We further apply H-CDLM to the flow matching model FLM, obtaining consistent gains with H-FLM and demonstrating that the framework generalizes across continuous generative paradigms. Our code will be made publicly available at https://github.com/matol-16/HCDLM.git .

0.29