CS Paper Radar

Hierarchical Security Monitoring for Edge-IoT: A Formal Methods Approach

Nikolaos Kekatos, Marinelio Chintri, Panagiotis Katsaros, Alexios Lekidis, Tom Nianios, Ioannis Seitoglou, Stylianos Basagiannis

cs.CR cs.LOcs.SE ·submitted 2026-10-07 10:40 UTC · v1
publishedhighly cited

Abstract

Cyber resiliency in edge-IoT deployments is fundamentally an economic problem: detection must keep critical processes operating under attack, but defender resources (compute, bandwidth, operator attention) are bounded. Centralised cloud monitoring offers expressive cross-device detection at prohibitive bandwidth cost; purely edge-local monitoring is cheap but blind to coordinated multi-device attacks where the asymmetric balance favours the attacker. We propose a lightweight hierarchical security-monitoring framework, built on formal runtime-verification methods, that occupies the practical middle ground at quantified cost. Each edge device runs a lightweight TeSSLa stream specification (size, payload validity, rate, and timestamp-drift predicates) that emits a four-valued verdict per aggregation window at sub-microsecond per-event cost; the gateway runs a parametric first-order MonPoly monitor over the per-device verdict streams at microsecond-scale per-verdict cost. The edge-to-gateway uplink carries roughly one Boolean per aggregation window per node, orders of magnitude smaller than the raw packet stream. The gateway tier detects coordinated attack patterns that no single-node monitor can see, shifting the asymmetric cost balance toward the defender. Every alert carries a witness set naming the device, the monitor tier, and the predicate that fired, providing an auditable record of the decision. We evaluate the framework on a container-host testbed spanning nominal and attacker nodes across four attack classes (buffer overflow, time spoofing, denial-of-service, and mixed advanced-persistent-threat patterns), and describe the edge- and gateway-tier specifications together with the cost-versus-coverage trade-off as monitor levels are added.

Comment
7 pages, 1 figure, 2 tables. Accepted at the 2026 IEEE International Conference on Cyber Security and Resilience (IEEE CSR 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

Hybrid Hierarchical Runtime Verification for Edge-IoT Security: Combining MonPoly and RTLola

cs.CR cs.DCcs.LO ·2026-10-07 ·Nikolaos Kekatos, Marinelio Chintri, Panagiotis Katsaros, Alexios Lekidis, Tom Nianios +3 more
publishedhighly cited similarity 0.85
Abstract · 19 pages, 2 figures, 7 tables. Published in Availability, Reliability and Security (ARES 2026), EU Projects Symposium Workshops, Springer LN…

Security monitoring of edge-IoT fleets faces three structural challenges. (i) A per-node monitor is cheap but cannot see attacks that coordinate across devices. (ii) A cloud monitor sees the full fleet but pays for that view in bandwidth. (iii) Even at the cloud, a monitor built on a single RV engine can be fooled by an attacker who compromises a device, raises one malicious request, and then goes silent: once the events stop, an event-triggered monitor has nothing left to evaluate. We propose a three-layer hierarchical runtime-verification framework that addresses all three. The edge layer classifies events as they happen, the gateway layer aggregates short windows of per-device behaviour, and the cloud layer runs two complementary RV engines. MonPoly handles first-order temporal correlation over the merged alert stream: coordinated overflow (which genuinely quantifies across devices) plus per-device multi-vector APT, escalation, and persistent-campaign patterns. RTLola handles a time-triggered silent-node property that an event-triggered engine cannot detect within a bounded delay under fleet silence. We evaluate the framework on a 15-actor Docker testbed covering eight attack profiles plus a silent-bypass scenario. In the controlled labelled testbed, every device-attributable incident the framework raises names an attacker-labelled device, and the RTLola tier catches silent-bypass attempts the event-triggered tier misses. Per-event monitoring stays in the microsecond range at the edge and gateway, with low end-to-end alert-to-incident latency at the cloud.

0.58

A Resilient Runtime-Verification Fabric for Security Monitoring of Critical Edge-IoT Infrastructure

cs.CR cs.DC ·2026-10-05 ·Nikolaos Kekatos, Marinelio Chintri, Panagiotis Katsaros, Alexios Lekidis, Tom Nianios +3 more
publishedhighly cited similarity 0.73
Abstract · 21 pages, 2 figures. Accepted at the 21st International Conference on Critical Information Infrastructures Security (CRITIS 2026)

Protecting critical infrastructure increasingly depends on continuously verifying large IoT fleets against formal security specifications at runtime. Yet the runtime-verification (RV) pipelines proposed for this task are typically single-host prototypes whose monitors read a shared log file, with no resilience to the failures such deployments incur: a crash or overload silently drops events, clock skew corrupts the ordering metric monitors require, a time-triggered "node has gone silent" property cannot fire when the network itself falls silent, and one slow consumer stalls the pipeline. Each failure is silent: the monitor keeps emitting verdicts over a corrupted view. We present RV-Fabric, a resilient delivery layer that carries the hierarchy over two brokers (MQTT for device ingest, a durable stream broker for backend delivery) and re-establishes five continuity guarantees: durable delivery under crashes, a trusted event order, progress under total silence, consumer isolation and flow control under bounded overload, each an invariant conditioned on broker durability. Above the transport, RV-Fabric makes evidence completeness part of runtime-verification semantics: every verdict carries a status (sound, degraded, incomplete or unavailable) derived from delivery gaps, retention pressure and liveness, so an incomplete stream cannot yield an unqualified all-clear. Under controlled fault injection on a containerised testbed, measured against a fault-free oracle using the real MonPoly engine, the shared-log baseline misses six of seven injected incidents, reporting each as an unqualified all-clear, whereas RV-Fabric preserves all seven; removing a delivery mechanism reintroduces silent loss, removing isolation costs only timeliness. Two published critical-infrastructure datasets, water-SCADA and IoT/IIoT, replay end-to-end.

0.59

Improving Service Availability in KubeEdge-Based Architectures Using Lightweight Intrusion Detection

cs.CR cs.SE ·2026-09-22 ·Harrol Ndjeudji Kuibou, Mostafa Anouar Ghorab, Mohamed Aymen Saied
similarity 0.67
Abstract

The increasing adoption of the Internet of Things (IoT) and cloud computing has accelerated the evolution of edge computing paradigms [1]. Industry forecasts estimate that the number of connected IoT devices will reach approximately 50 billion by 2030, following an estimated 38 billion connections by 2025 [34], resulting in an unprecedented growth in data generation. This trend necessitates efficient, scalable, and secure data processing mechanisms at the network edge. Consequently, ensuring the reliable management and protection of IoT applications and devices has become a critical challenge. In this context, KubeEdge extends cloud-native capabilities to edge environments, enabling distributed orchestration while introducing new security concerns. This paper investigates the security of container images in IoT-driven and distributed edge architectures. Specifically, we analyze the impact of major security threats, including Denial of Service (DoS) attacks and malicious container deployments, on the availability and operational stability of KubeEdge-based systems. To address these challenges, we propose a lightweight Recommended Intrusion Detection Rule Set (RIDRS) tailored for resource-constrained edge environments. The proposed approach improves system resilience by enabling timely detection and mitigation of security threats. We define system stability as the ability to maintain consistent operational behavior and to recover autonomously under adversarial conditions. Experimental results demonstrate that RIDRS significantly reduces system downtime and enhances service availability, particularly in scenarios involving code injection and malicious pod deployment attacks.

0.33

Enhancing Edge AI System Security with a Stacked Hardware Security Controller for Robust and Energy-Efficient Anomaly Detectio

cs.CR cs.ET ·2026-10-31 ·Carl Benda, Eren Kurshan, Paul Franzon
similarity 0.66
Abstract · IEEE 3DIC Conference

In recent years, the growing adoption of Edge AI systems has been accompanied by a surge in security threats. Edge AI deployments face an rapidly evolving spectrum of security threats, from side-channel information leakage to ad- versarial model manipulation and physical device tampering. Conventional security mechanisms such as malware scanners and resource-intensive firewall solutions are unsuitable due to edge AIs typically limited computational resources, strict energy budgets and thermal constraints especially in battery-powered and field-deployed environments. This paper proposes a stacked, hardware-based security mechanism that enables low-overhead, continuous detection of anomalous execution patterns. Anomaly detection utilizing hard- ware performance counters and physical sensors outperforms software-based alternatives by providing key capabilities such as tamper-resistant root-of-trust isolation, negligible runtime overhead, and resilience against compromised operating systems. Experimental analysis shows that adversarial or malicious ap- plications produce observable deviations in sensor and thermal readings on Edge AI systems and hardware-based anomaly detection provides effective and low-overhead anomaly detection.

0.13

Trust in Edge-Enabled IoT Security: Features, Challenges and Research Directions

cs.CR cs.AIcs.CYcs.ET+1 ·2026-09-21 ·Esin Ece Aydın, Şerif Bahtiyar, Gürkan Gür
similarity 0.64
Abstract · 34+ pages, 9 figures, 12 tables, submitted and under review in ACM Computing Surveys

Providing autonomous intelligence, pervasive connectivity and usability to human life and industry has led to the emergence of the Internet of Things (IoT). To support time-sensitive and resource-constrained applications, IoT systems nowadays increasingly rely on edge computing. This brings computation and decision-making closer to end devices. In edge-enabled IoT architecture, latency and communication overhead are reduced, but interactions among a larger and more diverse set of devices, edge nodes, services, and data sources are introduced as well. In such environments, security and privacy mechanisms provide the foundation for protection, while trust management can assess the reliability of interacting entities and adapting secure decisions. In this paper, we systematically review the current state of trust management in edge-enabled IoT. To this end, we propose a comprehensive taxonomy that maps physical, network, and application architectural IoT layers against the consumer, commercial, industrial, and infrastructure IoT domains. We further investigate state-of-art research based on their trust design, how trust integrated into secure IoT operations, the attacks that effect trust management process. Based on these findings, we identify key gaps in current research and outline future directions for context-aware and adaptive trust management in edge-enabled IoT.

0.31

Cross-Domain Joint DDoS Detection in Multi-Controller SDN via Confidence-Based Entropy Fusion

cs.CR ·2026-08-18 ·Zhaoyang Zhang, Shen Wang, Xiaofeng Tao
similarity 0.63
Abstract

In multi-controller Software-Defined Networking (SDN), Distributed Denial-of-Service (DDoS) attacks exhibit a "dispersed source, concentrated target" pattern across domains, i.e., attack traffic originates from multiple edge-controller domains but converges on a victim in a single aggregation controller domain. While entropy-based DDoS detectors are effective in single-controller settings, their direct application in multi-controller SDN reveals a previously overlooked anomaly. Through systematic experiments, we identify an aggregation bias: during the post-attack transition phase, the aggregation controller continues to generate excessive false positives, while edge controllers have already returned to normal. We attribute this phenomenon to the coupled effects of OpenFlow statistics lag and unconstrained dynamic-threshold drift. To address this issue, we propose a cross-domain confidence-fusion framework that leverages lightweight edge-side messages to calibrate aggregation-controller decisions without sharing raw traffic data. The framework is non-intrusive, communication-efficient, and incrementally deployable. Experiments on a three-controller linear Mininet testbed with 24 hosts over 10 runs show that the method preserves edge-controller performance while reducing the aggregation false positive rate from 8.87% to 1.96% and increasing the F1 score from 89.04% to 96.89%.

0.24

Cybersecurity in Edge Computing: A Trust-Aware Federated Hybrid Intrusion Detection Framework

cs.CR cs.LG ·2026-09-30 ·Zawad Yalmie Sazid, Robert Abbas
benchmark similarity 0.62
Abstract · 10 pages, 7 figures

Edge computing has emerged as a critical computing paradigm in modern distributed systems by migrating data processing closer to end users and Internet of Things (IoT) devices. While this paradigm decentralizes processes, minimizes latency, and reduces backhaul bandwidth congestion, it exponentially enlarges the cyberattack surface. Heterogeneous, resource-constrained edge devices deployed across unmanaged administrative domains present highly vulnerable targets. To address these vulnerabilities without compromising global data privacy regulations, this paper proposes a novel Trust-Aware Federated Hybrid Intrusion Detection Framework (TA-FHIDF). The proposed framework integrates an Autoencoder, a 1D Convolutional Neural Network (1D-CNN), and a Bidirectional Long Short-Term Memory (BiLSTM) model into a unified, localized deep learning engine capable of autonomous spatial and temporal feature extraction. Model training is performed collaboratively via federated learning, ensuring raw network telemetry remains isolated at local gateways. Furthermore, to defend against adversarial model poisoning attacks, we introduce a robust server-side trust-aware aggregation mechanism that evaluates client reliability using a cosine similarity metric before global model integration. Empirical evaluations across multi-vector benchmark datasets (UNSW-NB15, CICIDS2017, and Edge-IIoTset) demonstrate the framework's superior detection accuracy, rapid convergence, and high Byzantine fault tolerance under adversarial attack scenarios.

0.19

A Deployment-Aware Feasibility Framework for Machine Learning-Based IoT Intrusion Detection Across Edge, Fog, and Cloud Architectures

cs.CR ·2026-10-06 ·Shaker Nawasra, Munther Abualkibash
publishedhot direction similarity 0.62
Abstract · 8 pages, 3 figures, 7 tables. Published in the 2026 IEEE 15th International Conference on Communication Systems and Network Technologies (CS…

The rapid growth and heterogeneity of Internet of Things (IoT) environments have exposed fundamental limitations in traditional rule-based and signature-based intrusion detection systems. This paper presents a quantitative deployment-aware analysis of machine learning (ML)-based intrusion detection approaches across edge, fog/gateway, and cloud architectures. Unlike prior surveys that primarily emphasize detection accuracy, this work defines representative quantitative deployment capability envelopes extracted from experimental and system-level studies and introduces a structured Deployment Feasibility Score (DFS) model. The proposed framework maps ML techniques to architectural layers based on computational demand, memory footprint, and latency sensitivity using a weighted ordinal scoring mechanism. The analysis demonstrates that lightweight statistical and linear models are most suitable for edge deployment, ensemble and clustering-based methods align with fog/gateway environments, while deep and optimization-driven models are best suited for cloud infrastructures. By formalizing deployment feasibility through quantitative grounding and structured evaluation, this work provides practical guidance for selecting intrusion detection solutions under real-world architectural constraints, supporting more informed and deployment-conscious IoT security design.

0.39