CS Paper Radar

Dual-QK: Sharp Queries and Flat Keys for Prunable 2-bit KV Caches

Sunjoo Whang, Jungjun Oh, Minsung Kim, Dongho Seo, Jisu Shin, Gregory Kielian, Hoi-Jun Yoo, Sangjin Kim

cs.LG ·submitted 2026-10-07 10:50 UTC · v1

Abstract

Long inputs and extended generation increase the storage and access costs of the key-value (KV) cache. Low-bit quantization reduces storage and memory traffic, while query-channel pruning can further reduce key-cache reads. Rotation-based quantization redistributes the energy of key outliers across channels. To maintain computational invariance, the same orthogonal transform must be applied to queries, preserving query-key dot products. However, this rotation can disperse query energy, weakening the separation between a few large components to retain and many small ones to prune. We introduce Dual-QK, which uses paired non-orthogonal query and key transforms to address this conflict. Using calibrated query and key statistics, Dual-QK combines partial key whitening with a query-aligned basis to balance key scales for INT2 quantization and concentrate query energy for dynamic channel pruning. Channel-0 protection and bucket-relative RoPE support low-bit accuracy over long contexts. Experiments on four models across five generative benchmarks and long-context retrieval tasks show improved accuracy over OSCAR on most tasks at 40% query-channel sparsity. At a 128K context, Dual-QK provides $6.8\times$ KV-cache compression and an estimated $8.3\times$ reduction in KV read volume relative to unpruned BF16. Under the evaluated configurations, our SGLang implementation achieves up to $3.75\times$ the decoding throughput of unpruned BF16.

Closest papers

Nearest neighbours by meaning across the whole index.

Tailoring the Quantization Space for 1-Bit KV Cache Compression

cs.LG cs.AIcs.CL ·2026-10-02 ·Minsoo Cheong, Donghyun Son, Sungjoo Yoo
similarity 0.75
Abstract

The key-value (KV) cache becomes a major memory bottleneck in long-context LLM inference, placing substantial pressure on memory capacity and bandwidth. To mitigate this bottleneck, vector quantization (VQ) has emerged as a promising approach for aggressive KV cache compression. However, existing VQ methods degrade substantially in the 1-bit regime. At such extreme compression, each codebook must represent a larger group of channels with a limited set of centroids, making effective use of its capacity increasingly challenging. To address this, we introduce $\textbf{TaSQ}$, which tailors the VQ target space by combining query-guided channel weighting, cross-head normalization, and covariance-aware channel grouping to better reflect the error sensitivity and statistical structure of cached activations. Since these transforms are RoPE-compatible and can be easily merged into projection weights and codebooks, TaSQ preserves the conventional VQ lookup structure and adds negligible serving overhead. Across general, long-chain-of-thought reasoning, and long-context retrieval benchmarks, TaSQ consistently outperforms existing low-bit KV cache VQ baselines while preserving reasoning stability. On a single RTX 6000 Ada GPU, its SGLang implementation supports up to $14\times$ larger batch sizes and achieves $1.87\times$ higher peak throughput compared to the BF16 baseline.

0.38

PN-Mix: Pair-Norm Guided Mixed-Precision Key Cache Quantization for Efficient Long-Output LLM Inference

cs.LG cs.CL ·2026-10-14 ·Gil Jae Song, Sungjoo Yoo
top venue similarity 0.74
Abstract · EMNLP 2026

Long-output inference in large language models suffers from severe KV cache memory and bandwidth bottlenecks. While KV cache quantization alleviates this issue, low-bit quantization (e.g., 2-bit) severely degrades model accuracy. Recent mixed-precision key-cache quantization methods mitigate this degradation by allocating higher precision to important key channels, but estimate channel saliency using only key statistics. Through attention logit perturbation analysis at the RoPE channel-pair level, we show that quantization errors in channel pairs with large query--key pair-norm products contribute significantly to logit variation. Based on this insight, we propose PN-Mix, a mixed-precision key-cache quantization method for RoPE-based decoder-only LLMs, which allocates higher precision to salient channel pairs identified once during the prefill stage and reused throughout decoding. Across standard reasoning, code-generation, and AIME benchmarks, PN-Mix with 2.26-bit average precision achieves comparable or better average accuracy than prior mixed-precision methods using 2.32--2.39 bits. Furthermore, in our Pareto sweep, PN-Mix degrades gracefully down to 1.5 bits, whereas the compared baselines exhibit sharper performance drops below 2.25 bits.

0.34

E8 Lattice Key Quantization for Low-Bit KV-Cache Compression

cs.LG cs.AI ·2026-10-11 ·Sasho Nedelkoski, Alexander Acker, Soeren Becker, Dominik Scheinert, Odej Kao
similarity 0.73
Abstract

Compressing the key-value (KV) cache is essential for serving long-context large language models (LLMs) under memory constraints. While current scalar quantization methods achieve significant compression, they typically face a quality-fidelity trade-off, either suffering from performance instability at 2-bit precision or necessitating 3-bit keys to maintain model quality. In this work, we demonstrate that a uniform low-bit k2v2 configuration (2-bit keys and 2-bit values) can preserve near-baseline quality by using vector quantization (VQ) based on the $E_8$ lattice for KV keys. We show that structured VQ exploits correlations across adjacent dimensions to achieve signal-to-quantization-noise ratios (SQNR) higher than those of independent scalar quantization at the same key payload rate. To ensure practical utility, we adapt a table-based asymmetric scoring algorithm that avoids explicit codebook dequantization during attention computation and preserves decode-throughput parity with scalar baselines. Across five LLM families, our $E_8$ k2v2 approach yields \textasciitilde$6\times$ KV compression, roughly 20\% smaller than scalar k3v2 (3-bit keys and 2-bit values), while retaining near-baseline long-context perplexity. In our full-suite perplexity evaluation, $E_8$ improves over scalar k3v2 in 80\% of model--dataset--context settings. These results indicate that $E_8$ lattice VQ improves quality per byte while keeping throughput at parity, suggesting that structured key quantization is a useful primitive for KV-compression stacks. Overall, our work provides a low-overhead primitive for expanding the quality-memory frontier in long-context LLM inference.

0.20

Read What Matters: Query-Adaptive Quantization for KV Caches

cs.LG cs.CLcs.PF ·2026-10-08 ·Siddharth Bhandari, Lucas Gretta, Krishna Balasubramanian, Shiva Kasiviswanathan
theory similarity 0.72
Abstract · 50 pages, 3 figures, 12 tables

KV-cache entries are stored before their future queries are known, but each decoding query needs precision in different places. We study this mismatch using separate budgets for retained bits and bits fetched per query. ReadKV stores each key and value in a progressive code whose prefixes support different reconstruction precisions. For each query, it allocates key-channel prefixes using the query, computes attention from the reconstructed keys, and then allocates value-token prefixes using that attention. Stored entries remain unchanged. Each stage optimizes a calibrated distortion objective under a fixed budget; we prove exact allocation under diminishing refinement gains and relate these objectives to attention-output error. We also exhibit a finite-dimensional attention family where query-dependent access strictly outperforms every query-independent reader at the same read budget, even with unrestricted competing encoders and decoders. Across six base models, reading four bits on average from an eight-bit cache increases C4 perplexity by at most 0.66%, using about one quarter of the logical reads and half the retained capacity of a 16-bit cache. It is consistently more accurate than storing and fully reading four bits at the same payload-read budget. Retaining more bits than each query fetches is aimed at long-context decoding, where the cache bytes moved per step, rather than the weights, dominate cost. Long-context question answering and retrieval on two instruction-tuned models provide additional quality evidence. On the tested 8K-token, batch-one, single-layer workload on an NVIDIA A10G, a restricted eight-bit ReadKV reader with a two-bit mean payload-read budget has 39% lower latency than the tested TurboQuant codec.

0.45

Grouped Value Attention: Efficient KV Caching via On-Demand Key Reconstruction

cs.AR cs.LG ·2026-09-08 ·Vishesh Tripathi, Abhay Kumar, Ramsha Khan
benchmarkcode/data similarity 0.72
Abstract

The KV cache is a primary bottleneck for Transformer decoding: its memory footprint and cache-read traffic grow with sequence length. Grouped-query attention (GQA) reduces this cost by sharing key-value heads, but still stores both a key and a value at every step. We introduce Grouped Value Attention (GVA), which stores grouped values and reconstructs content keys with a learned linear map. At inference, the map can be absorbed into the query, eliminating the need to materialize content keys in the intended decode path. A small shared decoupled RoPE channel retains positional information through a separately cached positional key. For the configurations studied, this representation reduces persistent cache scalars by approximately 45-47% relative to matched GQA. At the 350M-parameter scale with 30B FineWeb-Edu tokens, the 16-dimensional positional variant reaches 44.18 average accuracy across five tasks, compared with 44.36 for GQA and 43.88 for MLA. These results demonstrate near-GQA benchmark accuracy with a more compact cache representation. To translate this compact representation into faster autoregressive inference, we have developed custom decoding kernels and are currently evaluating their end-to-end inference performance with an open-source release planned soon.

0.24

WUSH-KV: KV Cache Quantization with Data-Adaptive Transforms

cs.LG ·2026-09-29 ·Jiale Chen, Vage Egiazarian, Eldar Kurtić, Torsten Hoefler, Dan Alistarh
similarity 0.72
Abstract

KV cache memory and bandwidth costs grow with context length and batch size, which limits efficient long-context inference. To address this bottleneck, we introduce WUSH-KV for low-bit KV-cache quantization. It adapts WUSH, which constructs a data-aware transform from the second-order statistics of both factors in a matrix product to reduce quantization error. WUSH-KV uses calibration data to construct separate key and value transforms, with the value transform folded into the model weights and the key transform applied after RoPE. The transforms can be paired with clipped quantizers. For one such quantizer, QuEST INT, we show that, under mild assumptions, the WUSH transform is near-optimal. With this quantizer, WUSH-KV reduces layerwise reconstruction error and achieves the lowest end-to-end perplexity among other tested transforms. For end-to-end evaluation, we integrate WUSH-KV into SGLang using OSCAR-style percentile-clipped affine quantization. At 2-bit, WUSH-KV performs comparably to or outperforms the OSCAR transform across all evaluated models and downstream tasks.

0.39

Transformer-FSQ: Discrete Latents for Extreme KV-Cache Compression

cs.LG ·2026-11-06 ·Andras Szecsenyi, Thomas L. Lee, Vaisakh Shaj, Elliot J. Crowley, Amos Storkey
similarity 0.71
Abstract

Private, personalised language models must run on local consumer devices, where large, frontier models cannot fit, and retaining long contexts is non-trivial. Sequential memory---the key-value (KV) cache---grows linearly with context length, quickly dwarfing the model itself: for Qwen3-1.7B-Base, 200,000 retained entries require 21 GiB, 6.6 times more than the model weights. Yet the KV-cache compression methods we measured fail beyond moderate compression ratios. We introduce Transformer-FSQ, addressing extreme KV-cache compression by replacing standard key and value projections with a finite scalar quantisation bottleneck. Our cache stores a packed vector of discrete integer codes per token, with no per-token quantisation metadata. Converting a pretrained transformer trains only these projections on 0.25 tokens per original parameter. We evaluate Transformer-FSQ against five baseline families on models from 0.6B to 8B parameters. On long-context retrieval (RULER), from 12$\times$ to 97.5$\times$ Transformer-FSQ is the most accurate method we evaluate, across scales. A fused Triton kernel decodes directly from the integer codes; with baselines given their authors' kernels where available, it decodes at $1.01\times$ (95% interval $0.98$--$1.05$) the throughput of native SDPA attention on the uncompressed Qwen3-8B-Base at $32\times$ and $1.54\times$ at $97.5\times$. Extreme KV-cache compression is therefore a practical way to extend how much context a fixed device can hold.

0.15

LoopVQ: Sub 1-bit KV Cache Quantization for Looped Transformers

cs.LG cs.AIcs.CL ·2026-11-03 ·Minsoo Cheong, Sungjoo Yoo
similarity 0.70
Abstract

Looped transformers are a parameter-efficient alternative to standard transformers for language modeling. By reapplying the same layers across multiple loop steps, recent looped language models match the performance of non-looped models several times their size. While this architecture effectively reduces parameter memory, each loop step still stores its own keys and values, so the key-value (KV) cache grows linearly with the number of loop steps and becomes the main memory bottleneck. We observe that the KV cache of looped models is highly redundant along the loop axis and that the loop steps differ substantially in their sensitivity to quantization. Based on these observations, we propose $\textbf{LoopVQ}$, a KV cache vector quantization method for looped transformers that codes channels of multiple loop steps jointly, and fine-tunes the codebooks to match the output of the full-precision model. At 0.5 bits per element, LoopVQ outperforms existing KV cache vector quantization methods for standard LLMs on general, long chain-of-thought reasoning, and long-context retrieval tasks with Ouro and Huginn models. Its design is orthogonal to these methods, and combined with TaSQ, it retains much of the BF16 accuracy even at 0.25 bits per element. We also implement LoopVQ in SGLang, where it nearly halves the decode latency at a 32K-token context and raises the peak serving throughput by up to $4.3\times$ and $6.1\times$ on the 1.4B and 2.6B Ouro models compared to the BF16 baseline.

0.27