CS Paper Radar

A Camera-Native Stereo VR180 Dataset

Linxuan Lu

cs.CV cs.MM ·submitted 2026-10-07 03:20 UTC · v1
datasetcode/data

Abstract

Immersive VR180 video is increasingly produced with professional stereo fisheye cameras, yet public VR180 research resources are mostly collected from online platforms such as YouTube: already stitched, projected and compressed by unknown pipelines, and without lens calibration. We present a firsthand-captured stereo VR180 dataset recorded with two Blackmagic URSA Cine Immersive cameras. It contains 1,211 samples -- 636 stereo video clips (2,220.8 s, mostly 90 fps) and 575 stereo stills -- each released as camera-native Blackmagic RAW, separate-eye native fisheye HEVC (8160x7200 per eye) and half-equirectangular HEVC (7200x7200 per eye), together with the factory lens calibration, portable fisheye/half-equirectangular conversion tools and AI-generated scene and visual-challenge annotations. Re-encoding the released fisheye and half-equirectangular renders with x265 over 24 clips, both eyes, four rate points and nine viewing directions, native-fisheye coding needed more bitrate than half-equirectangular coding at equal viewport quality for all 24 clips (median +38%), in every part of the field of view. Data: https://huggingface.co/datasets/lulinxuan/VR180 ; code: https://github.com/lulinxuan/vr180-dataset-tools

Comment
6 pages, 5 figures, 6 tables. Dataset: https://huggingface.co/datasets/lulinxuan/VR180

Closest papers

Nearest neighbours by meaning across the whole index.

MIVIFI: Bridging Perspective and Fisheye Domains for Training Multi-View Fisheye Image Generation Models

cs.CV cs.RO ·2026-08-24 ·Matthias Neuwirth-Trapp, Begüm Altunbas, Jiayi Wang, Yan Xia, Maarten Bieshaar +2 more
published similarity 0.63
Abstract · Accepted at the IEEE International Conference on Intelligent Transportation Systems (ITSC) 2026

Achieving 360° coverage is critical for the visual perception systems of autonomous vehicles. Fisheye cameras offer a cost-effective solution by enabling full surround coverage with as few as two sensors. However, existing multi-view fisheye datasets are limited, and synthesizing rare corner cases typically requires computationally expensive 3D simulations, hindering the training. While generative models have achieved significant success in standard perspective imagery, their application to wide-angle distortion remains unexplored. In this work, we formally introduce the novel problem of multi-view fisheye image generation conditioned on volumetric semantic representations and present two distinct methods. We first propose SyntheOcc-FE, which adapts the SyntheOcc architecture to fisheye data. While effective, this method is constrained by the scarcity of fisheye datasets, which limits its generalization. To overcome these limitations, we propose our second method, MIVIFI (multi-view fisheye), which leverages cross-domain learning with Equirectangular Projections. By bridging the gap between dataset domains using KITTI-360 fisheye images alongside nuScenes multi-view standard images, our approach enables high-fidelity manipulation of scene content. This framework enables the structural modification of semantic occupancy inputs to introduce or eliminate specific actors and facilitates the rendering of diverse meteorological conditions and illumination scenarios absent in the limited fisheye datasets. Quantitative and qualitative experiments demonstrate that our methods achieve robust photorealistic multi-view fisheye image generation and highlight the specific advantages of our cross-domain strategy for handling data scarcity.

0.36

GOFish: Full Field-of-View Gaussian Splatting and Mesh Extraction

cs.CV cs.GRcs.RO ·2026-10-27 ·Allen Tu, Meher Gitika Karumuri, Shifan Zhu, Hailing Wang, Yen-Liang Lin +3 more
code/data similarity 0.61
Abstract · Project Page: https://3dgofish.github.io/

Robots, autonomous vehicles, and consumer 360° cameras use fisheye lenses for wide fields of view (FoVs). Simulation-ready digital twins require photorealistic rendering across the full FoV and an aligned collision mesh. However, prior fisheye Gaussian Splatting methods only rasterize up to 180° and do not produce meshes, while Gaussian surface reconstruction methods assume pinhole training images. We present GOFish, the first 3D Gaussian Splatting surface reconstruction method to train directly on fisheye images, rasterize FoVs beyond 180°, and extract an aligned mesh from the same scene. Calibrated densification recovers the surface across the entire FoV, while Calibrated Mip Filtering and Wide-Angle Appearance Modeling keep pixel blur and lens falloff out of the scene and mesh. Across the 200° FIORD and 205° FullCircle benchmarks, GOFish improves PSNR over the best prior method by 2.28 and 1.97 dB, respectively. It also outperforms fisheye rendering baselines within their own FoVs and achieves the highest mesh F-score on FIORD and the main ScanNet++ set. Together, the Gaussian scene and mesh form a LiDAR-free, simulation-ready digital twin that renders in real time, ray traces the full FoV, and provides collision geometry.

0.36

From Perspective to Fisheye Depth Estimation and Open-Vocabulary Segmentation

cs.CV cs.AI ·2026-08-28 ·Rit Gangopadhyay, Alex Wong
top venuecode/data similarity 0.60
Abstract

Vision foundation models are capable of generalizing across 3-dimensional (3D) scenes with high-fidelity estimates; their empirical success can be attributed to training on large-scale datasets of perspective images. However, when transferred to wide field-of-view (FoV) images, such as those captured by fisheye cameras, they return erroneous outputs due to a covariate shift stemming from the radial distortion on the image pixels. We propose a method to generalize vision foundation models to fisheye cameras. The crux of our method lies in a set of learnable parameters, termed Distortion Extenders (DEX), that model the fisheye distortion coefficients and the distributional shift between fisheye and perspective images encoded in the latent space. By minimizing a self-supervised alignment loss, DEX transforms the latent embeddings of fisheye images to resemble those of perspective images to recover high-fidelity estimates. DEX is architecture- and task-agnostic: We demonstrate DEX on monocular depth estimation and open-vocabulary segmentation for convolution- and Transformer-based architectures, where we consistently improve over baselines across indoor and outdoor fisheye datasets. As a byproduct, the activations of DEX can also be decoded to distortion coefficients to support camera calibration. Code available at: https://github.com/Suchisrit/DEX.

0.69

AISHELL8-FISHEYE: A Fisheye Audio-Visual Dataset for Target Speaker Extraction with Distortion-Aware Baselines

eess.AS ·2026-11-06 ·Peijun Yang, Zhan Jin, Juan Liu, Hui Bu, Xiaoyi Qin +3 more
similarity 0.59
Abstract

Fisheye cameras offer wide visual coverage but distort facial and lip geometry, challenging audio-visual target speaker extraction. We introduce AISHELL8-FISHEYE, a 47.03-hour corpus of 94 Mandarin speakers with synchronized audio and paired fisheye and normal-camera videos. Speaker-disjoint splits and synthetic two-speaker mixtures support reproducible evaluation under matched acoustic conditions. We also establish a baseline that combines a lip-reading encoder with a frozen distortion-aware branch transferred from fisheye head pose estimation. On fisheye video, adding this branch to an adapted lip encoder improves scale-invariant signal-to-distortion ratio improvement from 10.47 to 11.84 dB. The branch does not improve performance with a frozen lip encoder, highlighting the importance of visual adaptation. A substantial gap to paired normal-camera inputs remains. The corpus and baseline resources support further research on speech extraction from distorted visual cues.

0.16

FUSEye: Training-Light Fisheye Detection with Overlapping Views and Zero-Initialized Adapters

cs.CV cs.ROeess.IV ·2026-10-02 ·Wenya Su, Kai Luo, Di Wen, Ruiping Liu, Yufan Chen +3 more
benchmarkcode/data similarity 0.58
Abstract · Source code will be available at https://github.com/Su-wenya/FUSEye

Fisheye cameras give mobile robots a single-sensor, low-cost view of their surroundings, yet the COCO-pretrained detectors that practitioners routinely reuse fail on them: strong radial distortion warps local image structure, while boundary compression shrinks objects to near-invisible sizes. Full fine-tuning closes much of the gap but requires abundant fisheye labels and compute. We present FUSEye, a training-light framework that turns a frozen-backbone COCO-pretrained extra-large YOLO26 detector (YOLO26-x) into a fisheye detector. FUSEye adds roughly 227k new parameters while updating the inserted modules and the pretrained detection head. It addresses the transfer gap at three causally linked levels. At the input level, overlapping grid view generation and box remapping (GridViews) enlarge compressed boundary regions. At the feature level, zero-initialized residual adapters (Z-Adapters) correct distortion-induced feature misalignment. At the decision level, learned cross-projection agreement fusion (AgreeFusion) promotes low-confidence detections only when they are supported by consistent evidence across multiple views. On the WoodScape surround-view fisheye benchmark, FUSEye raises YOLO26-x from 0.148 to 0.266 mAP50 and retains 84.3% fully fine-tuned accuracy. Moreover, randomly using only 25% of the labeled training images, FUSEye achieves 0.2597 mAP50, retaining 97.6% of its full-label performance. FUSEye also consistently improves YOLOv8-11 detectors, showing that the recipe is architecture-agnostic. Source code will be available at https://github.com/Su-wenya/FUSEye.

0.32

Fisheye-VLA: Decoupling Coverage and Acuity for Manipulation with a Single Fisheye Camera

cs.RO ·2026-09-22 ·Ziang Ren, Zike Yan, Raymond Zhang, Xuguo He, Zhongyu Li
similarity 0.58
Abstract

Manipulation requires both broad scene awareness and detailed local feedback, yet conventional camera rigs provide them through separate front and wrist cameras. We present Fisheye-VLA, a visual interface that brings these capabilities together using a single passive fisheye. A global view preserves the workspace, while local perspective crops direct detail toward the interaction. The key design question is where this local visual budget should go. We answer it through a controlled re-rendering study, comparing alternative crop directions on the same recorded observations. The study finds that end-effector-centered views capture most of the estimated benefit of a much larger candidate pool, motivating a compact allocation around both hands. Our interface uses calibrated end-effector projection and motion lead to track the crops, while a shared ray encoding preserves their spatial meaning as they move. Integrated with a pretrained VLA, it achieves 84% and 82% success in the two expanded tabletop regions, where some target placements extend beyond the front-camera coverage, and supports shelf and conveyor manipulation. Ablations show that local crops and their viewing directions become more important in the larger workspace regions. The results demonstrate that a single fisheye can support these manipulation tasks without physical wrist cameras.

0.14

FishSense Lite: A Camera-Based, Single Laser Hardware Framework with Software System for In Situ Fish Length Measurement

cs.CV eess.SY ·2026-11-05 ·Christopher L. Crutchfield, Kyle Hu, Nathan Hui, Omair Qazi, Jennifer Loch +4 more
similarity 0.57
Abstract · 27 pages with 14 figures

Fish stock assessments need fish lengths paired with species from far more places than trained surveyors can reach. Recreational divers already visit many of those places, but measuring a fish underwater has required trained observers or specialist equipment. We present FishSense Lite, which recovers fish length from a single photograph taken with a recreational dive camera, a dive laser pointer, and a 3D-printed mount. The diver aims the laser at a fish and takes a picture; afterward, the dot's position in the image gives the range to the fish, and the range turns the fish's size in the image into a length. A citizen-science program, trained by the system's builders, taught its own divers and collected lengths paired with species for 73 wild fish across seven open-water dives. On seven wild fish also measured by an underwater stereo-imaging system, the two instruments agreed without detectable bias (mean difference +0.8%). On rigid targets of known length, FishSense Lite recovered every target to within 1.3%, and 99% of 1,055 frames fell within a 15% error budget. From the error sources we measure, we derive a field protocol: calibrate against a dive slate on every dive, photograph fish within 15 degrees of perpendicular and beyond 1 m, and take at least ten frames of each.

0.28

Beyond Monoscopic Viewing: A Study on 3D Gaussian Splatting Quality in VR

cs.HC ·2026-09-29 ·Shreyas Shivakumara, Gabriel Eilertsen, Karljohan Lundin Palmerius
similarity 0.56
Abstract · 12 pages

Stereoscopy is fundamental to virtual reality (VR), providing depth perception through binocular viewing. Recent advances in 3D Gaussian Splatting (3DGS) enable high-quality novel view synthesis, making it well suited to immersive VR. We render 3DGS reconstructions stereoscopically and evaluate them in a head-mounted display, replicating how they would actually be viewed in VR. Real-world capture provides only a limited number of views, and under this constraint 3DGS reconstruction often produces localized floaters and misplaced structures. Standard metrics miss these localized artifacts, which become salient under stereoscopic viewing, where geometry is placed at the wrong depth. We investigate whether standard image-quality evaluation reflects the perceptual quality of 3DGS reconstructions under reduced capture. We compare SfM-only baseline with a union initialization that combines SfM with a dense VGGT network. All other training components are held fixed, isolating the effect of initialization coverage. We conduct a user study comparing preferences under monoscopic and stereoscopic HMD viewing, and test whether image-quality metrics predict the observed preferences. Monoscopically, preference for the more consistent reconstruction is weak, reaching 58.4\% overall. Stereoscopically, the same preference rises to 78.2\% and is consistent across all participants, while image-quality metrics (PSNR, SSIM and LPIPS) and stereo-aware metrics (iSQoe and StereoQA) show only modest differences and fail to penalize them. Our results indicate that monoscopic evaluation and standard image-quality metrics substantially underestimate perceptual artifacts observed in 3DGS reconstructions for VR, making stereoscopic assessment essential for 3DGS quality evaluation in VR.

0.19