CS Paper Radar

Scaling Quantum Optimization to the Thousand-Qubit Scale with Distributed Quantum Sampling

Amana Liaqat, Ahmed Darwish, Stephen DiAdamo, Dan Holme, Kieran McDowall, Emre Sahin, Naeimeh Mohseni, Giorgio Cortiana, Corey O'Meara

cs.ET quant-phmath.OC ·submitted 2026-10-07 18:31 UTC · v1
benchmark

Abstract

The Minimum Birkhoff Decomposition (MBD) seeks a sparse weighted sum of matchings and is a challenging optimization problem with applications in network scheduling and energy trading. We scale a quantum-assisted decomposition method by combining single-layer QAOA sampling with Extended Fully-Corrective Frank-Wolfe (E-FCFW) optimization, spectral graph partitioning, and greedy feasibility repair. We demonstrate the pipeline on the 1,354-node PEGASE bus test case (representing a 1,354-bus transmission grid with 1,710 transmission lines), whose 1,710 edges define a native 1,710-variable matching optimization problem requiring 1,710 qubits in the unpartitioned encoding. Partitioning enables distributed execution on IBM superconducting quantum processors. The best reported hardware result uses a 50-qubit partition bound, while reducing partitions to 20 qubits degrades convergence in the partition-size comparison. Larger partitions are more demanding for matrix product state (MPS) simulation, and bond-dimension tests show that truncating quantum correlations reduces candidate quality. The results therefore motivate retaining a substantive quantum sampling task within each partition as the overall problem scales. On the PEGASE-1354 benchmark, repaired QAOA samples achieve lower residual decomposition error than both simulated annealing and uniform random sampling baselines, while spatial circuit packing reduces hardware execution time by approximately a factor of three. These results demonstrate that combining spectral partitioning, spatial circuit packing, and classical feasibility repair provides an executable path for deploying gate-based quantum sampling on thousand-variable constrained optimization problems on current hardware.

Closest papers

Nearest neighbours by meaning across the whole index.

Towards Reproducible Evaluation of Distributed Quantum Circuit Partitioning Algorithms

cs.DC quant-ph ·2026-08-27 ·Javier Vela-Tambo, Davud Azizov, Tian Guo
code/data similarity 0.75
Abstract · Accepted at IEEE QCE 2026 Workshop: Distributed Quantum Computing Systems and Infrastructure

Distributed Quantum Computing (DQC) addresses the physical scaling limitations of monolithic quantum processors by networking modular Quantum Processing Units (QPUs). Efficient execution of quantum algorithms on DQC architectures requires compiling them across QPUs while minimizing inter-QPU communication bottlenecks, primarily through circuit partitioning. However, current evaluations of state-of-the-art partitioning heuristics focus primarily on the total entanglement cost of the partitions, failing to capture the broader structural and temporal overheads introduced by distributed network constraints. This paper addresses this evaluation gap by applying established monolithic benchmarking metrics to partitioned distributed circuits to quantify the performance impact of network constraints. Using an open-source, automated evaluation pipeline, we systematically assess diverse partitioning algorithms across standardized workloads and quantum network topologies. Our empirical results reveal that partitioning algorithms with comparable entanglement costs can still introduce drastically different physical execution penalties. By exposing these hidden trade-offs, such as severe increases in circuit depth and substantial reductions in gate density, this study demonstrates that comprehensive circuit-level metrics are essential for guiding the future design of DQC compilers.

0.21

Entanglement-Capability-Aware Finite-Bond Circuit Cutting for Distributed Quantum Computing

cs.DC quant-phmath.OC ·2026-10-10 ·Weidong Liu, Qingqing Jiang, Yufu Liu, Ruiqing He, Jiandong Shang +2 more
similarity 0.73
Abstract

Distributed quantum computing distributes workloads that exceed a single processor's capacity across resource-constrained components. Circuit cutting enables this decomposition, but its effectiveness depends on partition choice. We present SACE, a Simulation-Aware Circuit Partitioning framework with Entanglement-Capability-Aware Screening. EP-Cost screens partitions using a parameter-dependent entanglement-capability proxy and native implementation cost. Under reconstruction constraints, finite-bond refinement selects the candidate that minimizes the worst-subcircuit discrepancy between normalized MPS simulations at bond dimensions $χ$ and $2χ$. Across 14 exhaustively enumerated small-scale candidate spaces, EP-Cost-guided genetic algorithm selections attain co-optimal native quasiprobability decomposition (QPD) overhead, with a median within-circuit Spearman correlation of 0.9965 between EP-Cost and QPD overhead. At matched cut counts, EP-Cost reduces QPD overhead by $25.20\times$ and $16.89\times$ for 8- and 9-qubit QFT circuits, respectively, and improves sampled reconstruction. On 12-qubit approximate QFT, deterministic reconstruction reduces Pauli-observable mean absolute error in all six low-bond conditions and total-variation distance in five. With five cuts and 7,776 QPD terms, SACE is best on all four reconstruction metrics in four of six conditions. At 24 qubits, SACE improves exact-local QFT accuracy in all 30 instance-bond-dimension conditions against each EP-Cost-only, Kernighan-Lin, and spectral baseline. The 50-qubit QFT comparisons remain favorable as reference convergence improves. Weighted QAOA circuits provide complementary, more bond-sensitive evidence. Refinement benefits persist across three search methods; larger candidate panels improve the optimized proxy without guaranteeing lower exact-local error.

0.14

SPLIT-Q: A Scalable Sequential Quantum Computing Framework for Coherent Controlled Islanding

eess.SY quant-ph ·2026-08-13 ·Yuqi Jiang, Zhiding Liang, Qiang Guan, Yan Li, Ganesh Kumar Venayagamoorthy
similarity 0.69
Abstract

Growing integration of distributed energy resources increases power-system variability and uncertainty. During disturbances, these effects can intensify generation-load imbalances and cascading failures. Controlled islanding limits their propagation by partitioning a compromised grid into connected, electrically sustainable islands. However, classical methods face rapidly growing computational costs as network size and island count increase. Quantum optimization offers an alternative for exploring this combinatorial partition space. Yet monolithic quantum formulations encode all assignment decisions in one circuit, causing qubit demand and circuit complexity to scale with network size. In this study, a qubit-bounded sequential distributed quantum approximate optimization algorithm (QAOA) framework is proposed to tackle coherent controlled islanding under limited quantum resources. It formulates the optimization as boundary-conditioned regional quadratic unconstrained binary optimization (QUBO) subproblems that are solved sequentially within a fixed qubit budget. Thus, circuit width remains independent of network size, with aggregate quantum workload scaling linearly on bounded-degree networks. Evaluation covers eleven IEEE systems from 9 to 300 buses using IBM quantum computing resources, with Gurobi and monolithic QAOA as references. Across all systems, the framework recovers feasible Gurobi-optimal partitions under noise, confirming the resilience of its solution quality. The results further show that the proposed method substantially reduces quantum-resource demand and circuit complexity relative to monolithic QAOA, allowing large islanding problems to be addressed within current hardware limits. The proposed framework provides a feasible and scalable pathway for quantum optimization in large-scale power systems.

0.04

Measurement-Efficient Differentiable Quantum Architecture Search for Combinatorial Optimization

cs.LG quant-ph ·2026-10-07 ·Lukas Theißinger, Thore Gerlach, Christian Bauckhage
top venuebenchmarkcode/data similarity 0.69
Abstract · 6 pages, 2 figures. Accepted at the 2026 IEEE 2nd International Conference on Quantum Artificial Intelligence (QAI). Code and data: https://…

Differentiable quantum architecture search (DQAS) is a promising framework for the automated design of quantum circuits, particularly for variational quantum optimization algorithms. However, its practical deployment on quantum hardware is limited by the large number of circuit measurements required during optimization, making hardware execution costly. In this work, we show that for a broad class of combinatorial optimization problems and commonly used rotational gate parameterizations, the measurement cost of DQAS can be significantly reduced without changing the optimization objective. We derive the proposed measurement reduction scheme theoretically and validate it experimentally on 3-SAT and MaxCut benchmark problems. Our approach reduces the requested gradient measurement cost by about 39 to 41% while introducing only negligible classical post-processing overhead, lowering the practical cost of executing DQAS on quantum hardware.

0.43

Resource-Aware Scheduling for Distributed Quantum Computing

cs.NI ·2026-10-21 ·Connor Howe, Raghav Mundada, Jake O'Shaughnessy, Ibrahim Abdullahi, Ali Anwar
similarity 0.69
Abstract

Distributed quantum computing (DQC) is a promising near-term approach for executing circuits that exceed the capacity of a single quantum processing unit (QPU). Prior work has made significant progress on circuit partitioning and reconstruction, but practical DQC requires more than cutting a circuit into smaller pieces. A runtime system must determine whether to execute the circuit intact, cut it for sequential execution on one QPU, or distribute it across multiple QPUs, while accounting for queueing, communication, reconstruction, and hardware constraints. We present a resource-aware scheduler for DQC that compares these execution alternatives at runtime using explicit models of QPU execution, communication, and host-side reconstruction, together with hardware-informed timing derived from simulated IBM QPUs. By treating communication and reconstruction as first-class scheduling costs, the scheduler selects execution plans using a more realistic view of end-to-end overhead than cutting-only approaches. Across our experiments, reconstruction accounts for over 83% of cutting overhead, distributed execution reduces P90 latency by up to 39% relative to uncut single-QPU execution, and scheduling overhead itself remains negligible, never exceeding 0.038% of end-to-end job latency. Together, these results show that DQC must be treated as a runtime scheduling problem over both quantum and classical resources, not just circuit partitioning.

0.15

Accelerating Distributed Variational Quantum Computing over Wireless Networks with Incentive Mechanism Design

cs.DC ·2026-11-12 ·Shaba Shaon, Dinh C. Nguyen, Octavia Dobre
published similarity 0.68
Abstract · Accepted for publication in IEEE Journal on Selected Areas in Communications (JSAC), 16 pages

Distributed variational quantum computing (DVQC) appears as the emerging paradigm to address the limitations of near-term quantum devices by decomposing large parameterized quantum circuits (PQCs) into smaller subcircuits executed across multiple quantum processors. In this context, how to incentivize quantum processors to participate actively is crucial for accelerating DVQC, yet remains largely unexplored in the literature. To address this significant gap, we propose a novel two-stage incentive framework for wireless DVQC. In the first stage, we minimize processor-side energy cost via a joint optimization of subcircuit parameters, number of noise measurements, and transmit power, efficiently solved using block coordinate descent (BCD) and successive convex approximation (SCA). In the second stage, we maximize aggregator-side system utility by selecting an optimal subset of processors based on their optimized energy costs derived from the first stage, formulating a non-convex combinatorial selection problem addressed using the alternating direction method of multipliers (ADMM). Extensive numerical experiments on the MNIST and CIFAR-10 datasets demonstrate that our DVQC framework achieves training and testing performance comparable to centralized quantum computing in terms of accuracy and loss, with similar convergence behavior on MNIST and slightly slower initial convergence on CIFAR-10. Moreover, our optimization approach consistently outperforms baseline schemes in energy efficiency and system utility, revealing a strong synergy between processor-level energy minimization and incentive-driven processor selection, where reduced energy costs directly enhances a processor's likelihood of selection and contributes to higher overall system utility.

0.26

Quantum-Classical Hybrid Methods for Optimization: Lessons from Classical Decomposition

cs.ET math.OCquant-ph ·2026-10-19 ·David E. Bernal Neira
survey similarity 0.67
Abstract · 34 pages main paper, 91 pages including supplementary material, 7 figures, invited paper after CPAIOR 2024 workshop on quantum computing

Quantum and physics-inspired solvers provide specialized sampling interfaces for Ising and quadratic unconstrained binary optimization models, but constrained optimization requires broader coordination and certification. This survey uses classical decomposition to analyze how such solvers can be integrated into hybrid quantum-classical algorithms. We distinguish formal decomposition, reformulation and reduction, and computational orchestration. For each interface, we ask what the transformation preserves, which assumptions make the outer method converge, and which certificates the implemented inner routine supplies. The central questions are whether that information meets the classical algorithm's requirements and whether hybridization improves solution quality or total cost enough to justify its coordination overhead. Benders decomposition, column generation, graph reduction, and copositive methods illustrate this distinction by separating heuristic proposals from classical certification. We also distinguish component effects within a fixed wrapper, reduction--solver interactions, and comparisons between complete quantum-enabled and classical systems. The analyzed studies provide conditional component benefits and favorable co-design evidence, but do not establish transferable end-to-end superiority over strong classical comparators. The resulting framework identifies opportunities for constraint programming and operations research in structure-preserving design, safeguarded hybrid algorithms, and controlled benchmarking.

0.09

Communication-Aware Qubit Placement and Automatic Node-Count Allocation for Distributed State-Vector Simulation

cs.DC cs.ET ·2026-10-07 ·Íñigo Aréjula-Aísa, Sergio Iserte, Petter Sandås, Ricard S. Raigada-García, Antonio J. Peña
similarity 0.67
Abstract

Quantum circuit simulation enables the execution of large-scale quantum algorithms by partitioning qubits across multiple computational nodes. However, an inefficient qubit placement leads to excessive inter-node communication, limiting performance and scalability. This work introduces a framework that computes a communication-aware qubit placement offline, minimizing data exchange among nodes, and selects, before circuit execution, the largest node count whose performance degradation stays below a user-defined threshold. The framework is integrated with the QuEST simulator. Evaluations on synthetic benchmarks and real-world QASMBench circuits show that optimized placements reduce communication and achieve runtime speedups of up to 2.3x over the identity placement, particularly in circuits with sparse, structured interactions. Our results show that qubit placement strongly affects the efficiency of distributed simulation and provide a practical, resource-scalable solution for quantum workload

0.30