CS Paper Radar

ASPIRE: Saddle-Point Discovery through Set Prediction and Physical Refinement

Yucheng Zhao, Quanyou Zhang, Shaoxiang Qin, Haixuan Xu, Xiongye Xiao

cs.LG ·submitted 2026-10-07 22:41 UTC · v1
benchmark

Abstract

Predicting thermally activated diffusion and defect evolution with event-driven models requires identifying atomic rearrangement mechanisms and their activation barriers. Discovering the associated saddle points is a major computational bottleneck: multiple rearrangements may originate from one metastable state, while costly local searches can fail or repeatedly converge to the same saddle. To address this challenge, we introduce ASPIRE (Atomistic Saddle-Point Inference with Refinement for Events), a framework that predicts a set of saddle candidates from a single initial atomic environment and refines them through Dimer searches on the original interatomic potential. The framework's equivariant set predictor, Ev-Quiformer, integrates (i) geometry-conditioned scalar-vector event slots for generating multiple saddle-point proposals and (ii) a decoder that maps each slot to a full atomic displacement field by combining atom, slot, and anchor-relative vectors with invariant coefficients. We also contribute two datasets: (i) BCCFE4VACAV-4000, comprising 4,000 four-vacancy body-centered cubic iron configurations and 65,450 reference events grouped by initial state for set supervision and post-refinement evaluation; and (ii) BCCFE-1TO4VAC, comprising 5,372 configurations with one to four vacancies each. Theoretically, we establish conditions for proposal equivariance. Experimentally, ASPIRE achieves 77.20% reference-event coverage on this benchmark, compared with 75.73% for a conventional Dimer baseline, while requiring approximately half as many Dimer force evaluations. In a timing evaluation on 50 configurations, ASPIRE reduces wall time per configuration from 478.8 s to 176.3 s under the stated hardware settings.

Closest papers

Nearest neighbours by meaning across the whole index.

Cross-Temperature Defect Identification in Atomistic Simulations via Multi-Level Domain Alignment

cs.LG cond-mat.mtrl-sciphysics.comp-ph ·2026-08-22 ·Yating Fang, Jungmin Kim, Qian Qian Zhao, Pallavi Biswas, Joshua M. Gonjon +2 more
similarity 0.69
Abstract · 46 pages, 8 figures

Identifying atomic defects at elevated temperature is difficult because thermal fluctuations blur the local symmetry that both geometric heuristics and supervised classifiers rely on: trustworthy labels exist in low-temperature reference configurations, while the high-temperature regime where robust analysis matters most is effectively unlabeled. We cast this as a cross-temperature domain-shift problem and align the two domains at three levels: an equivariant denoiser at the input level, cross-temperature contrastive learning at the representation level, and a morphology-aware regularizer that steers predictions toward the compact geometry of physical defect structures. Because no atom-wise truth exists at temperature, we further introduce a label-free evaluation suite that scores predicted defect structures along five spatial and physics-based axes, enabling model assessment and selection without high-temperature labels. Near the melting point, the framework identifies vacancies and self-interstitial atoms across face-centered-cubic, body-centered-cubic, and hexagonal-close-packed iron systems with every interstitial localized and zero false detections in every vacancy system against Wigner-Seitz ground truth, with no high-temperature labels used in training. It sustains this fidelity on a million-atom, 2.5 ns trajectory, resolving single vacancy hops and complete Frenkel-pair recombination, and captures grain-boundary phase transformations in aluminum bicrystals, distinguishing two nucleation modes. Multi-level domain alignment thus offers a practical, label-efficient route to temperature-robust structural analysis of large-scale molecular dynamics.

0.29

AtomWorld-Mirror: Macro-Step World Modeling of Critical Evolution Backbones for Materials Dynamics

cs.AI cond-mat.mtrl-sci ·2026-10-08 ·Ziming Pan, Ruge Zhang, Haozhi Han, Junkai Zhou, Xingyuan Chen +5 more
code/data similarity 0.62
Abstract · Project page: https://atomworld-mirror.github.io

Atomistic simulation is a fundamental tool for studying long-term materials evolution, from diffusion and defect dynamics to interfacial reactions and fracture. Yet conventional simulators typically advance at microscopic resolution, spending substantial computation on low-impact local updates before reaching structurally consequential states, an evolutionary-resolution bottleneck that limits long-horizon simulation. We propose AtomWorld-Mirror, a time-aware macro-step world model for the critical evolution backbone of atomic systems. For Step-Wise atomistic simulation, AtomWorld-Mirror distills short micro-event segments into physically reachable transitions between key states, jointly predicting sparse structural edits and accumulated physical time through latent macro-step dynamics. Local reachability, inventory conservation, and continuous-time consistency constrain each transition. By amortizing local atomic physics into a reusable latent macro model and replacing explicit micro-event replay with macro-step inference, this formulation provides a path toward substantially faster prediction of long-term materials evolution while preserving structural validity and time semantics. Across five atomic systems, spanning Cu-rich RPV steel irradiation aging, Cu-Zr metallic glass, and Li$_3$N-based anti-perovskite solid electrolyte, macro-step inference delivers a speed up of $10^3$ to $10^4$ times over event-by-event simulation.

0.29

Reaction-Transformation-Aware Flow Matching for Generalizable Transition State Generation

cs.AI physics.chem-ph ·2026-08-14 ·Kaipeng Zeng, Wenxi Zhai, Shengrui Xu, Jie Zhao, Bowen Li +3 more
similarity 0.62
Abstract

Transition-state (TS) structures define the energetic barriers and mechanistic pathways of elementary chemical reactions, yet their identification remains computationally demanding because conventional saddle-point searches require expensive quantum-mechanical calculations. Recent machine-learning approaches have accelerated TS generation by predicting structures from reaction endpoint information, but they primarily learn geometric correspondence between endpoints and TSs, leaving the structural transformations underlying elementary reactions implicitly represented. To address this limitation, we introduce TransTS, a reaction-transformation-aware framework for generalizable TS generation from atom-mapped reactant-product pairs. TransTS explicitly learns atom-level structural transformations between reaction endpoints and integrates them with a unified atom-aligned geometric representation of reactants, TSs and products, enabling reaction-aware equivariant generation of TS geometries. TransTS is designed to provide reliable TS initial guesses for subsequent quantum-chemical refinement, where generated structures are evaluated not only by geometric similarity but also by their ability to converge to validated saddle points and recover the intended reaction pathways. Across IID and zero-shot OOD benchmarks, TransTS demonstrates improved TS initialization quality, with particularly strong generalization to unseen reaction distributions. On the challenging GDB-10-rxn and GDB-17-rxn OOD benchmarks, TransTS generates TS candidates that more frequently converge to validated saddle points and recover the intended elementary reactions after refinement than existing approaches under the same training regime. Scaling reaction coverage and model capacity further improves both geometric fidelity and refinement outcomes.

0.04

Rotation-Invariant Machine Learning for Highly Symmetric Molecular Configurations

cs.CV physics.chem-ph ·2026-11-16 ·Logan Bolton, Tomas Karella, Nicholas Lubbers, Nathaniel Philip Gorski, Emily Shinkle +3 more
publishedbenchmark similarity 0.60
Abstract · NeurReps 2026 Extended Abstract Track (NeurIPS 2026 Workshop on Symmetry and Geometry in Neural Representations)

Atomistic machine learning can approximate expensive quantum mechanical calculations at a fraction of their computational cost, but accuracy depends strongly on how the three-dimensional atomic environments are represented. Invariant representations enable fast computation but can fail to distinguish geometrically distinct configurations, especially in highly symmetric environments. We introduce a lightweight benchmark to evaluate expressivity on $n$-fold symmetric configurations, and use it to expose degeneracies in both invariant and equivariant architectures. Guided by these results, we construct a new invariant basis for HIP-HOP which resolves most of the identified failures. On a methane simulation dataset, the extended basis achieves the lowest error among the HIP-HOP variants and has similar accuracy to EquiformerV3 while running $3.2\times$ faster at inference. These results show that carefully constructed invariant representations can mitigate key expressivity limitations while balancing accuracy and computational efficiency.

0.37

Efficient Machine Learning Interatomic Potentials

cs.LG cond-mat.mtrl-sci ·2026-11-17 ·Yury Lysogorskiy, Anton Bochkarev, Ralf Drautz
benchmark similarity 0.59
Abstract

Machine learning interatomic potentials (MLIPs) reach an accuracy close to quantum mechanical reference calculations at a small fraction of the cost. Efficiency is the purpose of MLIPs, yet strategies for efficient MLIPs have not been reviewed systematically. This review takes efficiency as its guideline. To compare MLIPs on a common footing, we represent them in a complete basis expansion, the Atomic Cluster Expansion (ACE) and its graph generalization (GRACE). The expansion is canonical, built from products of single-particle functions. Classical interatomic potentials, such as the embedded-atom method, and many modern MLIPs, including equivariant transformers, can be represented within this expansion. Much of the apparent diversity of MLIP architectures therefore reflects how non-linearity, layer coupling and optimization are handled rather than which interactions the models can represent. We show how the cost of an MLIP becomes linear in system size and, at fixed rank of the tensor decomposition, in model complexity, and we discuss the role of machine learning, which provides non-linear parameterizations and optimization. Because efficiency is meaningful only at a given accuracy, we also compare accuracy and cost. On the Matbench Discovery leaderboard, models with three to five layers approach the accuracy of deeper models, and one basis, truncated along the Pareto front of error and speed, spans more than two orders of magnitude in cost. Ultimately, training data determine the quality of any MLIP.

0.31

Equivariant Flow Matching for Electron Density Prediction

cs.AI physics.chem-ph ·2026-10-02 ·Chenxing Liang, Chengdong Wang, Yuchao Lin, Xiaofeng Qian, Shuiwang Ji
benchmark similarity 0.59
Abstract

Machine learning surrogates for density functional theory (DFT) have been increasingly used to reduce the cost of first-principles calculations. In this arena, predicting real-space electron densities offers a scalable and transferable initialization for self-consistent field (SCF) procedures. However, current methods face a clear dilemma. That is, grid-based architectures incur a high computational cost, while basis-set methods fail to capture the structural correlations inherent in the coefficient space. Here, we develop OrbFlow, an $\mathrm{SE}(3)$-equivariant generative model that predicts Gaussian-type orbital (GTO) coefficients via flow matching. OrbFlow retains the efficiency of a compact atom-centered basis while replacing pointwise regression with a learned probability path over the full coefficient space. It is trained through a two-phase trajectory curriculum that mitigates discretization drift during numerical integration. OrbFlow achieves state-of-the-art accuracy on QM9, reducing density error by 13.6% relative to the previous best model, and reduces error by 51% to 63% on every molecule of the MD benchmark relative to the strongest prior method sharing its basis. The predicted density also cuts SCF iterations by up to 68% with zero-shot transfer to unseen exchange-correlation functionals and recovers dipole and quadrupole moments to within a few percent of DFT references without any SCF calculation.

0.17

Framework-Conditional Open Materials Generation

cs.LG cond-mat.mtrl-sci ·2026-10-29 ·Maya M. Martirossyan, Hillary Pan, Philipp Höllmer, Stefano Martiniani
benchmark similarity 0.58
Abstract

Theoretical predictions of novel materials rely on a variety of techniques, from data-mining-based ion substitution methods to fully de novo generative models. Each approach imposes specific constraints and encounters unique challenges when extrapolating beyond the distribution of known materials to discover new ones. The foremost goal of materials generation is to produce stable, unique, and novel (S.U.N.) structures. Predicted structures that meet these criteria, however, typically result from novel chemical compositions mapped onto known structural prototypes or frameworks. We leverage this heuristic insight to present a new generative paradigm for the de novo prediction of inorganic crystalline materials constrained by their structural framework---i.e., the unit cell shapes and respective particle positions. Our method, termed OMatG-FC (Open Materials Framework-Conditional Generation), learns via a combination of discrete flow matching on the atomic species and stochastic interpolants for the volume scaling of the unit cell lattice, while fixing in-place the fractional coordinates and the unit-volume lattice vectors, dramatically reducing the dimensionality of the problem compared to unconstrained (framework-free) generation. Our method is more flexible than existing prototype-constrained methods, demonstrating capability for discovery of unseen, stable prototypes derived from known structural frameworks. We also investigate the number of unique frameworks in the MP-20 dataset, demonstrating the propensity of duplicate frameworks within the dataset and providing a framework-split version. We benchmark the performance of our model using the LeMat-GenBench suite using three ML interatomic potentials and achieve state-of-the-art S.U.N. rate below the convex hull, eschewing the need to learn atomic packings for materials discovery.

0.09

Data-driven candidate structure ensemble generation beyond the convex hull with crystALL approach

cs.CE cond-mat.mtrl-sci ·2026-11-02 ·Adam M. Krajewski, Ricardo Amaral, Jonathan W. Siegel, Luke A. Myers, Rushi Gong +2 more
code/data similarity 0.58
Abstract · 19 pages, 7 figures, software repository https://github.com/PhasesResearchLab/crystALL

Real materials consist of multiple stable or metastable states under real-world conditions, existing as statistical ergodic ensembles of configurations rather than ideal crystals. Yet, data-driven computational materials discovery increasingly biases itself toward finding "new stable structures" from ground-state DFT calculations alone. This limits our long-term ability to discover materials whose properties emerge from metastable phases, to explain experimental observations, or to model thermodynamic behavior comprehensively. Predicting ergodic sets of atomic configurations of known and hypothetical solids is a fundamental challenge in theoretical crystallography, approached via many complementary methods. We discuss this conceptually and introduce crystALL, a pragmatic and powerful data-driven approach to discovering ensembles beyond the convex hull, embracing structural diversity over stability alone, enabling robust experiment matching in cases evading traditional methods. crystALL leverages 5 million relaxed structures from OPTIMADE and MPDD to rapidly generate a comprehensive candidate set by: (1) species substitutions; (2) ML feature-space analysis with pySIPFENN; (3) representative structure selection via clustering and energy-minimization or property matching; and (4) construction of the final candidate ensemble for experimental or ab initio validation. We also uniquely address the common challenge of experimental composition uncertainties spanning many integer stoichiometries by new efficient searches across anonymized compositional ranges rather than fixed formulas. Overall, crystALL's ensemble-focused philosophy provides critical advantages over the prevailing convex-hull-searching paradigm, which often fails to account for key experimental observations and increases AI/ML discovery bias over time - akin to model collapse in LLMs retrained on iteratively generated content.

0.23