CS Paper Radar

SV-TAD: Native Sparse Convs for Efficient Temporal Action Detection

Ricardo Pizarro, Roberto Valle, José M. Buenaposada, Luis M. Bergasa, Luis Baumela

cs.CV ·submitted 2026-10-08 09:31 UTC · v1
top venue

Abstract

To adapt billion-parameter Vision Transformers for long-video understanding, recent methods freeze the backbone and train lightweight convolutional modules. While effective for parameter-efficient training, existing adapters do not reduce inference-time computation, leaving scalability with respect to video length largely unaddressed. Token selection can reduce attention cost by pruning redundant tokens, but it breaks the spatial grid structure required by convolutional adapters. This forces an expensive dense reconstruction, nullifying much of the potential speedup. We address this by introducing native sparse 2D convolutions, a primitive that allows these adapters, for the first time, to operate directly and efficiently on dynamically pruned token sets. We integrate this primitive into SV-TAD, an adapter framework for temporal action detection, reducing VideoMAEv2-L computation by up to 64% and achieving 2.2x faster inference, while maintaining state-of-the-art accuracy on THUMOS-14 and ActivityNet-1.3. When scaled to InternVideoNext-L, our approach surpasses the previous state of the art at roughly half its computational cost. Moreover, the sparse formulation naturally supports auxiliary task tokens, which improves fine-grained assembly detection on ATTACH.

Journal ref
ECCV 2026. Lecture Notes in Computer Science, vol 17044. Springer
DOI
10.1007/978-3-032-37577-3_30

Closest papers

Nearest neighbours by meaning across the whole index.

DiA: Directional Adapter

cs.CV ·2026-10-05 ·Ashish Kumar Singh, Prakash Chandra Chhipa
top venuecode/data similarity 0.75
Abstract · Accepted at NeurIPS 2026. Joint first authors with equal contributions. Code - https://github.com/prakashchhipa/DiA-Directional-Adapter

Fine-grained action recognition often depends on how an action unfolds over time rather than on appearance alone. Visually similar classes may differ in preparation, execution, or completion phases, making uniformly aggregated temporal context suboptimal. We study this problem under a practical objective: i) improving recognition performance with few tunable parameters, ii) being compute efficient, and iii) using only the readily available video modality. Motivated by this missing temporal observation and the accuracy--compute efficiency--unimodality objective, we propose Directional Adapter (DiA), a parameter-efficient adapter on top of CLIP. DiA formulates temporal specialization into causal and anti-causal directions, allowing past-to-present and future-to-present cues to be modeled differently. To keep this directional modeling parameter- and compute-efficient, both directions use depth-wise temporal convolutions in a compact bottleneck space and are combined through a learnable fusion. DiA achieves state-of-the-art performance among methods using a single video input modality across seven public benchmarks, with only $\sim$3.6M tunable parameters, while also delivering higher throughput and lower inference latency than prior methods. Code is available at https://github.com/prakashchhipa/DiA-Directional-Adapter.

0.47

Spatio-Temporal Multi-Order Interaction for Video Recognition

cs.CV cs.AIcs.LG ·2026-11-03 ·Kevin D. Nguetche, Lilian Hollard, Eric Granger, Marco Pedersoli
similarity 0.74
Abstract

Many temporal approaches for video recognition rely on explicit cross-channel aggregation projections, which have quadratic complexity in the number of channels, introducing significant computational overhead. In addition, the spatio-temporal representation used for video recognition is biased either toward local order interactions (for CNNs) or toward global order interactions (for transformers). Starting from the multi-order spatial representation of MogaNet, our method introduces two complementary contributions to tackle these problems. First, for the temporal modelling, we introduce parallel multi-order processing with depthwise-only convolutions and implicit gating-based aggregation, which is linear in the number of channels, inducing a considerable computational reduction. Second, we propose a dual interaction between spatial and temporal dimensions, which allows a better spatio-temporal representation without increasing the computational cost. By combining these two contributions, our proposed VideoMogaNet achieves performance on par with or better than state-of-the-art action recognition approaches across multiple video benchmarks (UCF101, HMDB51, Kinetics-400, Diving48), while considerably reducing the cost of the temporal branch.

0.23

MATA: Motion-aligned Temporal Adapter

cs.CV ·2026-11-04 ·Ashish Kumar Singh, Prakash Chandra Chhipa
publishedcode/data similarity 0.74
Abstract · Accepted at WACV 2027. Joint first authors with equal contributions. Code - https://github.com/prakashchhipa/MATA-Motion-aligned-Temporal-Ad…

Few-shot fine-grained video action recognition requires recognizing novel action classes from only a few labeled examples. The difficulty is that visually similar actions often share actors, scenes, poses, and objects, differing only in the order, timing, and short duration of motion changes. We study this problem under three practical constraints: few tunable parameters, low compute cost, and use of the video modality alone. We propose Motion-aligned Temporal Adapter (MATA), a parameter-efficient adapter on top of a frozen CLIP backbone. MATA specializes CLIP features along the temporal dimension using two components: temporal phase alignment through learnable temporal positional embeddings, and a local motion transition operator through depth-wise convolution. With only ~3.6M tunable parameters, MATA achieves state-of-the-art performance across multiple fine-grained benchmarks while remaining robust to both visual corruptions and temporal disruptions induced by frame dropping. Code is available at https://github.com/prakashchhipa/MATA-Motion-aligned-Temporal-Adapter

0.38

FastVLA: Task-Conditioned and Temporally Adaptive Visual Token Compression for Efficient Vision-Language-Action Models

cs.RO ·2026-10-15 ·Jiuyi Xu, Chengyuan Qian, Zhengzhong Tu, Yang Sui, Yangming Shi
publishedcode/data similarity 0.72
Abstract · Accepted by WACV 2027

Vision-Language-Action (VLA) models present a promising paradigm for general-purpose robot manipulation, but closed-loop deployment is often limited by inference efficiency: at each timestep, high-resolution, often multi-view images are encoded into hundreds of visual tokens that dominate transformer computation and latency. Token compression via attention is a natural solution but is challenging for VLA control because (1) decision-critical tokens are determined by the task, not generic visual saliency, and (2) the token budget varies substantially across steps, so static metrics and budgets waste computation or discard control-critical tokens. We introduce FastVLA, a training-free, task-aware, and temporally adaptive visual token compression framework. At each step, FastVLA scores token importance via task-to-vision attention and adaptively sets the compression rate from the importance-distribution uniformity, measured by an inverse-Simpson metric with online sliding-window calibration. We evaluate FastVLA on OpenVLA, OpenVLA-OFT, and CogACT across LIBERO and SIMPLER, and on a physical Franka Research 3 robot. In simulation, it reduces LLM-backbone FLOPs by 35-59\% and action latency by 9-32\% (a 1.09$\times$-1.46$\times$ speedup) while maintaining task success, achieving a comparable or better efficiency-performance trade-off than existing plug-and-play token compression/pruning/reuse baselines. On the real robot, it cuts action-prediction latency by 20\% (1.25$\times$ speedup) at comparable success. Code is available at https://github.com/jiuyixu25/FastVLA.

0.39

VETO: Video Efficient Token Optimization for Vision Language Models

cs.CV cs.AIcs.CL ·2026-10-01 ·Gueter Josmy Faure, Hao Ping Wang, Min-Hung Chen, Winston H. Hsu
similarity 0.72
Abstract

Processing long videos with Vision-Language Models (VLMs) is bottlenecked by the quadratic cost of visual tokens, making long-form inference prohibitively expensive. While single-axis compression methods mitigate this, they hit a hard efficiency floor because they treat spatial and temporal redundancy independently. We present VETO (Video Efficient Token Optimization for Vision-Language Models), a training-optional plug-in that eliminates this bottleneck through dual-axis compression: (i) an intra-frame compressor that merges semantically similar tokens within each frame via optimal-transport inspired matching, and (ii) an inter-frame compressor that identifies and merges temporally redundant frames. The key design insight is hierarchical ordering: by first compressing spatial dimensions, VETO drastically reduces the cost of subsequent global temporal matching, bypassing the efficiency wall of single-axis approaches, with an advantage that grows with modern fully-fused attention infrastructure. Empirically, VETO achieves up to 45% faster inference (e.g., on LLaVA-OneVision-7B) while preserving or improving accuracy. Under extreme token starvation (10% budget), VETO outperforms VFlowOpt (54.9%), VisionZip (52.6%), and FastV (47.9%) with 55.7% accuracy. We demonstrate universal applicability across LLaVA-OneVision, InternVL-2.5, and LongVA, with zero-shot accuracy preserved or improved in all cases.

0.18

FlashGaze: Training-Free Multi-Scale Patch Pruning For Efficient Video Understanding

cs.CV ·2026-10-03 ·Ziye Zhu, Yanghao Zhou, Lixing Tan, Jialiang Kang, Shuxuan Li +1 more
similarity 0.72
Abstract · 15 pages, 6 figures

Multimodal Large Language Models (MLLMs) have demonstrated strong performance in video understanding, yet efficiently processing long, high-resolution videos remains challenging. Such videos often contain substantial spatiotemporal redundancy, and processing redundant visual tokens can incur avoidable computational overhead. Many existing methods prune visual tokens during or after vision transformer (ViT) encoding, leaving much of the encoding cost unaddressed. Some approaches prune patches before encoding but rely on learned auxiliary networks for patch selection, incurring additional training and inference overhead. To address these limitations, we propose FlashGaze, a training-free method that reduces spatiotemporal redundancy before ViT encoding without introducing auxiliary networks. FlashGaze uses pixel-space differences as a proxy for information loss and employs Quadtree Dynamic Programming to jointly optimize patch dropping, merging, and keeping under a fixed budget. Experiments on two MLLM backbones across multiple benchmarks demonstrate substantial efficiency gains while largely preserving accuracy. On Qwen3-VL-8B, FlashGaze retains 98% of the full-input baseline accuracy on LongVideoBench while achieving up to 5.4x and 17x speedups in ViT encoding and MLLM prefill, respectively, and reducing peak GPU memory usage by a factor of 1.8. These efficiency gains enable the model to process videos with more frames and higher resolutions on the same GPU hardware, unlocking video understanding at scales previously out of reach.

0.23

ActionCodec2: A Streaming Action Tokenizer

cs.RO ·2026-11-11 ·Zibin Dong, Yicheng Liu, Shiduo Zhang, Tianyuan Yuan, Baijun Ye +2 more
similarity 0.72
Abstract

Most action tokenizers for autoregressive vision language action (VLA) models compress motion into chunks that must be decoded in full before their actions become executable. We introduce ActionCodec2, a non-neural streaming tokenizer that releases actions incrementally while keeping trajectory reconstruction error within a prescribed tolerance. Its encoder quantizes each step relative to the decoder's reconstructed state, so the selected motion primitive corrects residual error rather than allowing errors from independently quantized increments to accumulate. Finding the smallest such primitive set is a geometric covering problem; we derive the exact minimum for translation and constant-factor-tight bounds for rotation. Set-BPE then losslessly merges co-occurring primitive symbols across coordinates and neighboring steps, without a fixed coordinate ordering. A universal version fitted on 20k hours of data from 24 embodiments averages 8.8 tokens per second for 15 Hz end-effector motion on this corpus. With the same VLA backbone, ActionCodec2 outperforms the compared tokenizers on three simulation benchmarks and in zero-shot real-robot evaluation. Its streaming representation allows policies to incorporate state feedback within an action chunk, substantially improving performance over open-loop execution under randomized dynamics, external disturbances, and moving objects. The same tokens also can serve as a direct control interface for VLM agents, which compose successful action sequences into reusable macros. These agent-built macros reduce control decisions and thinking-token usage across attempts and transfer to a held-out task. More results are available at https://zibindong.github.io/actioncodec2-page/

0.17

MT-WAM: Reorienting the One-Pass Predictive Representation Toward Action Generation

cs.CV cs.RO ·2026-09-18 ·Yiguang Yang, Jiankun Peng, Xiaoming Wang, Yiran Zhang, Zhibo Fang
similarity 0.71
Abstract

Fast-WAM shows that video-action co-training improves control without generating future video at inference, making the representation from a single video diffusion Transformer forward central to action generation. However, future-observation prediction does not explicitly prioritize the future dynamics and visual structure needed for control. We present MT-WAM, which retains the original training objectives and adds complementary supervision for future two-dimensional point trajectories and visual features. A lightweight dual-stream branch copied from the video backbone's final blocks provides target-specific processing, while a structured attention mask prevents cross-stream attention. Motion-stream tokens supply additional dynamics conditions to the action expert. Future visual-feature prediction provides supervision in a feature space that captures object and spatial structure. This supervision trains the video backbone to provide more informative visual context for action generation under changing visual conditions, without adding visual-feature-stream tokens to action conditioning. At inference, MT-WAM uses video and motion caches computed once per replan and skips future-video prediction. Without additional embodied policy pretraining, MT-WAM achieves 98.2% success on LIBERO and 73.7% on LIBERO-Plus, exceeding Fast-WAM by 23.8 percentage points on the latter. On RoboTwin 2.0 Clean2Rand, Random success increases from 6.30% to 19.40%; across four real-world tasks, average success increases from 67.0% to 77.8%.

0.42