CS Paper Radar

From Asymptotic to Designer-Assigned-Time Control: A Review of Stability Notions, Design Mechanisms, and Controller Architectures

Özhan Bingöl

eess.SY ·submitted 2026-10-08 13:44 UTC · v1
surveybenchmark

Abstract

Many control tasks require a target to be reached not only eventually but on time. Finite-, fixed-, predefined-, and prescribed-time control address this need, yet the labels are used loosely: a settling time that grows with the initial condition, a bound that holds for all initial conditions, a deadline chosen by the designer, and a limit attained only at the terminal instant often share one name. This review aims to make such claims comparable. It separates three questions that are often conflated: what temporal property is promised, which feature of the Lyapunov analysis produces it, and which controller architecture carries it into the closed loop. A recurring question is whether a guarantee proven for an idealized loop survives once observers, adaptation, disturbances, actuator limits, and digital implementation are included. The examined studies are therefore audited one by one, recording what each claims, which variable is actually certified, and how the result is validated. The audit shows that estimation and approximation errors often reduce an exact guarantee to a practical one, and that experimental evidence comes mostly from fast electromechanical systems. A scalar benchmark with two complementary tunings shows how much of the apparent difference between methods stems from conservative bounds, initial-condition dependence, and numerical tolerance, and how saturation and sampling can delay or remove a deadline. The review closes with open problems, among them deciding which deadlines a given plant can meet, combining certificates across interconnected subsystems, and preserving a guarantee through implementation.

Closest papers

Nearest neighbours by meaning across the whole index.

Comparing Controller Synthesis Methods with Deadline-Miss Awareness

eess.SY ·2026-08-19 ·Melanie Gallant, Marc Seidel, Paolo Pazzaglia, Claudio Mandrioli, Christoph Mark +3 more
benchmark similarity 0.67
Abstract · The first two authors contributed equally to this work

This paper presents a comparative study of real-time controller design methods for dynamical control systems subject to deadline overruns. Numerous techniques have been proposed to handle missed deadlines, i.e., including models or information of possible deadline misses directly in the control design. These approaches substantially differ in their assumptions, supported execution semantics, required runtime information, and provided guarantees, making direct comparison challenging. We address this gap with a qualitative assessment of representative deadline-miss-aware control methods. We analyze the design space of such controllers and identify the critical assumptions on the real-time constraints, the control design criteria and implementation aspects. We expose how these different assumptions lead to the different trade-offs in applicability, and control performance and guarantees. We contribute a comparison tool enabling researchers to systematically benchmark new techniques against the state of the art. The study is supported by simulations on two case studies: a Furuta pendulum and an electric motor to illustrate the practical behavior of the different approaches under missed-deadline conditions.

0.45

Velocity-Free Funnel Control of Euler-Lagrange Systems: An Artificial-Delay Approach

eess.SY ·2026-11-12 ·Chayan Kumar Paul, Pushpak Jagtap
similarity 0.60
Abstract

Classical funnel control keeps the tracking error within a prescribed, time-varying envelope by increasing the feedback gain as the error approaches the boundary. For mechanical systems, this guarantee typically relies on velocity measurements. We show that it can be retained for fully actuated Euler--Lagrange systems using only position measurements. The proposed controller replaces the velocity error with a difference quotient of the position error over a fixed delay, while preserving the classical unbounded gain. It requires no plant model, reference derivatives, observer, or filter states. The central challenge is to reconcile the averaging inherent in delayed feedback with a gain that can grow without bound near the funnel boundary. We resolve this by establishing an a priori bound on the gain along closed-loop trajectories, independent of the delay. This bound yields a computable delay threshold that guarantees tracking within the prescribed funnel and boundedness of all closed-loop signals. The threshold depends only on bounds on the inertia, forces, and reference. Simulations demonstrate tracking accuracy comparable to full-state funnel control and tolerance of delays substantially longer than certified. With quantized position measurements, the controller also requires substantially less torque than an existing derivative-free funnel controller.

0.39

Asynchronous Model Predictive Control Under Model Mismatch: Stability and Performance Guarantees

eess.SY ·2026-09-08 ·Changrui Liu, Anil Alan, Shengling Shi, Bart De Schutter
similarity 0.59
Abstract · This is the first work to characterize the joint effects of model mismatch, general asynchronous feedback, and prediction horizon on stabili…

Certainty-equivalence model predictive control (CE-MPC) is widely used for its simplicity and efficiency, but theoretical guarantees under asynchronous feedback remain limited. This paper establishes stability and performance guarantees for asynchronous CE-MPC of input-constrained nonlinear systems. We first derive a nominal stability condition and competitive-ratio bound that explicitly account for inter-execution intervals without prescribing a feedback mechanism. A value-function perturbation analysis for quadratic stage costs then accommodates additive, potentially non-smooth model mismatch without constraint qualification conditions. Combining these results yields stability criteria and competitive-ratio bounds for CE-MPC under general asynchronous feedback, including event/self-triggered and multi-step MPC. The guarantees explicitly relate prediction horizon, inter-execution time, and uncertainty magnitude, quantifying performance degradation relative to an ideal infinite-horizon controller. These results clarify tradeoffs between feedback frequency, model accuracy, and horizon length, guiding asynchronous MPC design using approximate or learned models.

0.30

Robust Data-Driven Output Feedback for Systems With Unknown Input Delays

eess.SY ·2026-10-31 ·Ngoc Tuan Dinh, Ba Huy Nguyen, Alexey Peregudin, Egor Dogadin
similarity 0.58
Abstract · 6 pages, 1 figure. Submitted jointly to IEEE Control Systems Letters (L-CSS)

In a history-feedback realization, an input delay increases memory without increasing the number of unknown physical coefficients. We use this structure to design output-feedback controllers for discrete-time systems with one input, one output, and known undelayed order, using noisy input-output data. For a known delay, we derive a necessary and sufficient linear matrix inequality for common-quadratic stabilization of all models consistent with the data. Optimizing its equation-error bound gives a robustness margin for the measured record. For an unknown constant delay in a known interval, we characterize noiseless delay ambiguity and give a sufficient condition for one controller to stabilize all models for every delay consistent with the error bound. Under stated excitation and nondegeneracy assumptions, this procedure is feasible for all sufficiently small equation errors. Numerical examples compare robustness at equal controller memory and show that certified stabilization can succeed while distinct delay models remain compatible with the same data.

0.31

Admissibility-Preserving Control for Block Strict-Feedback Systems Under Time-Varying Asymmetric Actuator and State Constraints

eess.SY math.DS ·2026-11-12 ·Saurabh Kumar, Lohitvel Gopikannan, Shashi Ranjan Kumar, Abhinav Sinha
theory similarity 0.57
Abstract

This paper addresses the tracking control of block strict-feedback nonlinear systems subject to time-varying asymmetric actuator and full state constraints. To that end, we develop a time-varying Admissibility-Preserving Control (APC) framework, in which the Admissibility-Preserving Input Realization (APIR) generates the plant input through a dynamic realization. The APIR guarantees input admissibility under the moving actuator set whenever each actuator bound contracts slower than the decay rate of the realization, and a closed-form lower bound on its gain is derived. The state constraints are handled by a logarithmic barrier coordinate at every backstepping step, with widths measured from the virtual control to the moving envelope of the corresponding state. We prove that every state lies inside its envelope, with each virtual control only required to remain inside the envelope of the next state, while the tracking error converges to zero exponentially. Simulations demonstrate the efficacy of the proposed safety-critical control scheme.

0.18

Minimal Experiments for Robust Stabilization: Information, Spectral Geometry, and Duration

eess.SY math.OC ·2026-10-01 ·Alexey Peregudin, Ngoc Tuan Dinh
similarity 0.57
Abstract · 12 pages, 1 table. Submitted to IEEE Transactions on Automatic Control

On broad classes of linear systems, the shortest experiments are almost as good as the best possible ones. For $n$ states and $m$ inputs, the shortest input sequences that support robust data-driven stabilization of every controllable plant have $mn+1$ steps with exact states and $m(n+1)$ with noisy states. We show that, when the spectral radius is bounded and the spectrum is well separated near the unit circle, these sequences tolerate a fixed fraction of the error level achievable by any experiment, even one designed with full plant knowledge and allowed to use any finite duration. This constant-factor comparison can fail for slowly actuated systems. For $A=I+hG$ with controllability depth $ν\ge2$, short experiments lose a factor of order $h^{ν-1}$, and duration of order $1/h$ is both necessary and sufficient to recover a fixed fraction of the optimal tolerance.

0.57

Globally Certified Invariant-Ellipsoid Control from Data

eess.SY ·2026-09-30 ·Ngoc Tuan Dinh, Egor Dogadin, Alexey Peregudin
theory similarity 0.57
Abstract · 6 pages, 2 figures. Submitted jointly to IEEE Control Systems Letters (L-CSS) and the American Control Conference (ACC)

This letter develops a data-based method for designing state feedback for a discrete-time linear system under bounded disturbances. For each admissible feedback gain and scalar design parameter, a Lyapunov equation determines an invariant ellipsoid: a region that the state cannot leave under the permitted disturbances. We optimise the gain and parameter to minimise a trace-based measure of the resulting output enclosure. At each parameter value, value iteration gives a lower cost bound, while separate controller evaluation gives an achievable upper bound. These bounds also let us assess whole parameter intervals without evaluating every point. We prove that the search stops after finitely many evaluations with a stabilising state-feedback gain whose objective is within any prescribed absolute tolerance of the infimum over the chosen ellipsoid family. Neither an initially stabilising gain nor attainment of the infimum is assumed. The guarantee assumes exact arithmetic and a sufficiently informative batch of exact measurements, including disturbances during data collection; the resulting feedback uses only the state. A position--velocity example illustrates the bounds, controller checks, and computational cost.

0.32

Reach-Stabilize Control of Control-Affine Systems with Unknown Affine Parameters

eess.SY math.OC ·2026-10-08 ·Alexander Dorsey, Kunal Garg, Ankit Goel
similarity 0.56
Abstract

This paper considers the reach-stabilize prob- lem for a class of nonlinear control-affine systems with unknown parametric uncertainties, where the system states must remain in a safe set at all times, or enter a safe set in finite time and then remain in it, and converge to a goal point. An estimator is designed that generates a parameter estimate and a computable, nonincreasing bound on the estimation error from a known initial error bound, without requiring persistence of excitation. The bound defines margins that are added to a control barrier and a control Lyapunov function condition, which are then enforced in a quadratic program for efficient control design. It is shown that, for the closed-loop system, the safe set is forward invariant when the system starts within the safe set and is finite-time reachable from outside the safe set with a recovery-time bound that does not depend on the unknown parameter, and that the goal point is exponentially stable. In two numerical examples, with the initial state outside and inside the safe set, the proposed control policy, a baseline oracle control policy that uses the true parameter, both recover or remain in the safe set and converge to the goal point, while another baseline control policy that uses a fixed, incorrect, parameter does not remain

0.18