CS Paper Radar

Tiling 3D by Translates of a Single Polycube is Undecidable

Erik D. Demaine, Stefan Langerman

cs.CG math.COmath.MG ·submitted 2026-10-08 17:39 UTC · v1
theory

Abstract

We prove co-RE-completeness, and thus undecidability, of the following problem: given a single (connected) polycube, decide whether it tiles 3D Euclidean space by translations. We reduce from Wang tiling using the decorated two-prime Sudoku construction of Greenfeld and Tao and a cyclic encoding adapted from OpenAI's 3D aperiodic tile, and apply a reduction of Kim to make the prototile connected (via faces). Dimension three is optimal: translational monotiling is known to be decidable in $\mathbb{Z}^2$ and for a single (possibly disconnected) polyomino in $\mathbb{R}^2$.

Comment
7 pages, 1 figure, 1 table

Closest papers

Nearest neighbours by meaning across the whole index.

Counting Square Tilings with a Fixed Set of Polyominoes Is #EXP-Complete

cs.CC ·2026-10-30 ·Qiuyu Chen, Baao Xie
theory similarity 0.72
Abstract

An important question in counting complexity is whether exact counting can remain hard under restrictions that make feasibility easy. Tilings of squares by a fixed family of polyominoes provide a stringent test of this question, since tileability is polynomial-time decidable and the only varying input is a binary-encoded side length. We prove that there exists a fixed finite family of connected polyominoes for which counting translation-only square tilings is #EXP-complete under polynomial-time metric reductions, while the counting function belongs to #E. The resulting separation reveals that solution multiplicities can retain computational information that feasibility alone cannot capture. The proof develops a two-stage numerical isolation technique that combines a boundary-amplified Wang system with a rigid geometric compiler to recover accepting-computation counts while controlling all noncanonical tilings.

0.22

A Strongly Aperiodic Monotile in Three Dimensions

cs.DM math.COmath.MG ·2026-09-16 ·Ioannis Tsiokos
theoryhighly cited similarity 0.64
Abstract

Socolar and Taylor asked for a single, simply connected three-dimensional prototile that forces nonperiodicity by shape alone, admitting no weakly nonperiodic tiling; the Schmitt-Conway-Danzer biprism and the three-dimensional Socolar-Taylor tile admit screw motions or a periodic stacking direction. We exhibit a rational polyhedral $3$-ball $Q$, which we call Chair44 (R44): a seven-cube chair whose $24$ exposed unit panels carry tiny square-pyramid features, and prove, as a proof submission, that $Q$ admits tilings of $\mathbb{R}^3$ by congruent copies, reflections allowed, and that every such tiling has no translational period and a symmetry group of order at most $24$; every tiling is homochiral and carries a unique infinite hierarchy of nested supertiles. The solid was designed to a reading of the aperiodic-monotile phenomenon reached with the Six Birds emergence calculus (Section 3.3), and the construction turns on a single finite test, checked by machine: the tile's own contact rule survives coarsening, so that the decoded parent tiling obeys the tile's rule and no other. The proof combines a written geometric argument, that the features force every tiling onto a registered lattice, with exhaustive finite enumerations; the companion census is replayed by two independent implementations, every finite gate is kernel-checked in Lean 4 (modulo a named compiler hook per native_decide theorem), and the written geometric lemmas and the logical assembly are Lean theorems as well, so that the theorem is kernel-checked modulo the named compiler hooks; the written proofs remain as exposition.

0.49

Perfect Rectangular Tilings with Two Colors

cs.CG cs.DM ·2026-09-22 ·Oswin Aichholzer, Robert Ganian, Phillip Keldenich, Maarten Löffler, Gert Meijer +3 more
published similarity 0.61
Abstract · Full version of a paper with the same title to appear at ISAAC 2026

We study a finite tiling problem, where tiles are unit squares whose four edges are colored with one of two colors. We ask whether a given rectangle admits a perfect rectangular tiling: every cell of the rectangle is occupied by one tile, neighboring edge colors match, and exactly $n_i$ tiles of type $i$ are used, where rotations of the tiles are allowed. Our problem is related to classical Wang tilings, more general finite tile-placement problems, and edge placement puzzles. But in our problem, the multiplicities of the tile types are part of the input and the tile alphabet is fixed and extremely small; thus the complexity of the problem arises from the interaction between the rectangle dimensions and the prescribed tile multiplicities. We provide a comprehensive study of the perfect rectangular tiling problem. For this we consider all classes of subsets of the six possible tile types for two-colored edges, and we characterize for each class whether multiplicities either always allow a perfect rectangular tiling or whether their existence can be decided efficiently.

0.46

Towards Strongly Aperiodic Monotiles in Higher Dimensions

cs.CG math.MGmath.COmath.DS ·2026-10-01 ·Dmitry Kamenetsky
theorycode/data similarity 0.61
Abstract · 13 pages, 3 tables, 4 figures

The discovery of Chair44 (Tsiokos, 2026) settled the three-dimensional einstein problem with a strongly aperiodic polyhedral monotile in $\mathbb{R}^3$. This note extends the underlying mechanism---the rep-$2^N$ chair $C_N = [0,2]^N \setminus (1,2]^N$ with corner/socket markings---to $\mathbb{R}^N$. Besides expository material (the rep-$2^N$ dissection and a conditional strong-aperiodicity theorem under lattice registration and hierarchical enforcement), the note makes a new computational contribution. We introduce a frame-marking formalism in which the marking of a tile is its full orientation frame and the matching rule is the contact language generated by the substitution itself; this makes the search for matching rules finite in every dimension. We give a finite certificate (coarsening closure, tightness, and a two-shell enclosure analysis) whose validity implies that every lattice-registered tiling by the marked tile is uniquely hierarchical, hence strongly aperiodic. For $N=3$ the certificate passes: it yields explicit facet matching rules on the 24 panels of $C_3$ (135 admissible facet-contact triples) and reproduces, from first principles and independently of published constructions, the Chair44 statistics 2388 $\to$ 44 admissible contacts (30 occurring), 33 one-shell clusters, 15 extendable, each forcing a unique supertile. Among the 2187 homochiral frame assignments of the 3D substitution with a translated central child, the certified one is unique up to conjugation. For $N=4$ the same pipeline is run on several structured families of frame assignments (canonical, $D_4$-, $Z_2\times Z_2$- and $Z_4$-symmetric, and a lift of the 3D solution); none is coarsening-closed, and we report the failure data. A self-similar marking of $C_4$ thus remains an explicitly finite, open computational problem, which we state precisely. Code: https://github.com/dimkadimon/Monotile-RN

0.57

Interlocking Tiling of 3D Finite Domains

cs.GR ·2026-11-16 ·Xuyang Ma, Rulin Chen, Chaewoon Kim, Ying He, Peng Song
similarity 0.61
Abstract

A K-hedral tiling of a 3D finite domain is a covering of the domain with tiles without gaps or overlaps, where each tile is congruent to one of the K distinct shapes called prototiles. To use 3D K-hedral tilings in practice, they need to satisfy two requirements. First, K should be small to reduce the fabrication cost (e.g., through reusable molds) and simplify the (dis)assembly process. Second, a K-hedral tiling result should be structurally stable, in particular via interlocking, where all the tiles are immobilized by their geometric arrangement, except the key. Since these two requirements are often in conflict, existing approaches always trade one for the other. In this work, we formulate a new tiling problem called interlocking tiling, aiming to generate 3D K-hedral tilings that satisfy the above two requirements simultaneously. Given a 3D finite domain represented as a voxel grid, our goal is to compute a small prototile set whose instances exactly tile the input domain while ensuring that the tiling result forms an interlocking assembly. To solve this challenging problem, we propose a twolevel computational approach that hierarchically decomposes the input domain into interlocking parts (domain-level partitioning) and further partitions each part into interlocking tiles (part-level partitioning). To guide the part-level partitioning, we propose a new graph representation with regular structures to facilitate the generation of tiles with identical shapes while ensuring that they are interlocking. Our approach allows generating interlocking tilings that exactly cover 3D finite domains with diverse shapes while achieving high prototile reuse. We compared our approach with state-of-the-art methods to demonstrate its superiority, and validated the practicality of our interlocking tiling results via fabricating two of them.

0.21

Guillotine and Tiling Cofiniteness in Unary Picture Languages

cs.FL ·2026-08-25 ·Pierluigi San Pietro, Stefano Crespi Reghizzi, Antonio Restivo
publishedtheory similarity 0.60
Abstract · In Proceedings AFL 2026, arXiv:2608.23071

Motivated by the study of closure operations on picture languages, we ask when a set of unary tiles can generate all sufficiently large pictures either via repeated horizontal and vertical concatenations or via tiling operations. In one dimension, the lengths of words in the concatenation closure of a unary language form an additive subsemigroup of positive natural numbers; hence, they are finitely generated. Cofiniteness is characterized by the gcd of these generators being one. Since ordinary cofiniteness in two dimensions is too restrictive and essentially reduces to degenerate one-dimensional conditions on strips, we introduce and study asymptotic cofiniteness: all sufficiently large rectangular pictures are generated. A direct extension of the one-dimensional criterion, requiring the gcd of the tile heights and of the tile widths to be one, is not sufficient, because local congruence obstructions may persist in two dimensions. We give an exact arithmetic characterization of asymptotic cofiniteness for arbitrary, possibly infinite, sets of unary rectangular tiles. The characterization is the same for the guillotine closure, obtained by horizontal and vertical concatenation, and for the full tiling closure. For finite tile sets, the proof combines semigroup arguments and an explicit least-common-multiple stacking construction for sufficiency, while necessity is obtained by a roots-of-unity argument applying also to nonsliceable tilings. The extension to infinite tile sets follows from the finite-basis theorem for Klarner systems.

0.36

Computing the minimal perimeter polygon for digital objects in the triangular tiling

cs.CG ·2026-09-12 ·Petra Wiederhold
published similarity 0.57
Abstract · Preprint from November 11, 2024

This work presents an algorithm, together with its correctness proof, to determine the minimum perimeter polygon (MPP) for digital objects given as regular complexes in the triangular plane tiling. Such objects are edge-adjacency-connected sets of triangle tiles that have no end tiles, and the point set union of all their tiles forms a simple polygon. Nevertheless, the boundary paths of the objects are not assumed to be simple. Then the MPP is a weakly simple polygon that coincides with the relative convex hull (i.e., geodesic hull) of a set $A$ with respect to a simple polygon $B$, where $A\subset B$, but $A$ is not necessarily a polygon, in fact it is generally not connected. Our MPP algorithm relies on constructing and iteratively constraining cones of visibility through forthcoming boundary tiles, it uses the structure of the canonical boundary path, the MPP frontier is the shortest polygonal curve following this path. We also propose a boundary tracing algorithm to obtain such paths from the objects.

0.58

Polyomino Nets Covering Three Different Boxes of Area 106 and Related Results

cs.CG ·2026-08-20 ·Erik D. Demaine, Jenny Diomidova, Nicole Jacobus, Landon Kryger, Matthew T. Parker +3 more
unusual similarity 0.54
Abstract · Fix Figure 3

We present new results for polyomino nets that fold into 2 and 3 different cuboids through a computer search. The main result is the finding of 40 nets that fold into all three different cuboids with a surface area of 106. The secondary results are the finding of infinite families of nets that fold into three cuboid shapes, and the calculation of the number of common nets between smaller cuboids. The algorithms used to make the searches feasible will also be explained. The algorithms include taking advantage of some hidden structures in the nets that fold into the Nx1x1 cuboids, taking advantage of how a lot of nets fold into cuboid shapes in a 'striped' way, and using a variant of Redelmeier's algorithm. The paper ends with open questions that encourage the reader to broaden our collective understanding of the subject of creating polyomino nets.

0.43