CS Paper Radar

Searching for "Harmful Refusal": A Psychometric Audit of an AI Safety Benchmark

Christopher M. Stewart, Preston Botter, Natalie Sarabosing, Muye Zhang, Rachel Phinnemore, Shalini Ghosh, Hong Shen, Hoda Heidari

cs.AI ·submitted 2026-10-08 17:46 UTC · v1
benchmarkposition

Abstract

Safety benchmarks typically report one overall score for a suite of datasets, each of which may target one or more safety-related attributes, so models with similar overall scores can have very different attribute profiles. Comparing models is more tractable at the level of individual attributes, yet it is often unclear whether even a single dataset's scores isolate any single attribute. One plausible candidate for such an attribute is harmful refusal, a model's tendency to refuse dangerous or policy-violating prompts. We examine whether it constitutes a single, measurable attribute in HELM Safety. Using a construct validity framework that stipulates that an attribute must exist before a test can measure it, we start with HELM Safety's four datasets that might plausibly target harmful refusal, but find that three are saturated. We subject the remaining dataset, HarmBench, to two psychometric tests to determine if a single attribute like harmful refusal could stand behind its score. First, multidimensional item response theory modeling strongly suggests that HarmBench does not measure a singular attribute. Second, a differential item functioning analysis finds items where models from different developers with the same refusal ability score differently. These flags largely disappear under scope-specific matching, a pattern consistent with aggregation effects but not sufficient to rule out domain-specific developer differences. Zooming out, HarmBench collapses distinct harm behaviors into one score, and the overall HELM safety aggregate further collapses HarmBench and scores from other datasets into a single top-line number. Any safety score that averages over datasets and items can hide saturation and conflate behaviors this way. We argue that a score should earn its single-attribute reading before models are compared with it.

Comment
COLM 2026, AI for Measurement Science (AIMS) Workshop

Closest papers

Nearest neighbours by meaning across the whole index.

What AI Benchmarks Actually Measure: Adapting Convergent and Discriminant Validity to Interrogate Fifty-Six AI Benchmarks

cs.CY ·2026-09-08 ·Meera Desai, Sang T. Truong, Hanna Wallach, Alex Chouldechova, A. Feder Cooper +6 more
benchmarkdataset similarity 0.65
Abstract · 17 pages, 28 pages of appendix

Benchmarks play a central role in the development and governance of models, yet it is often unclear whether they actually measure the concepts they purport to measure (e.g., reasoning, refusal). We adapt convergent and discriminant validity from the social sciences into an approach for interrogating AI benchmarks, applying it to 56 capability and safety benchmarks across 53 models. We label benchmarks with substantively similar purported concepts to a shared assigned concept, and ask whether model rankings on benchmarks with the same assigned concept correlate more strongly than rankings on benchmarks with different assigned concepts. We ask analogous questions at the item level using item response theory (IRT) models. We find that correlations between model rankings on benchmarks with the same assigned safety concepts are often weak, suggesting these concepts may be conceptualized inconsistently across benchmarks. For assigned capability concepts (e.g., reasoning, knowledge), model rankings are often as strongly correlated among benchmarks with the same assigned concept as between benchmarks with different assigned concepts, suggesting these capability concepts may not discriminate well from one another. In some cases, benchmarks that share design elements (e.g., score format) correlate more strongly than benchmarks with the same assigned concept. Finally, some individual benchmarks correlate more strongly with benchmarks assigned a different concept than with benchmarks sharing their own assigned concept, suggesting they may measure a different concept than they purport to. For example, BBQ-accuracy correlates more strongly with benchmarks labeled reasoning than with benchmarks that share its assigned concept, bias. To support future empirical work on benchmark validity, we release our extensive dataset of model outputs and scores at the item- and benchmark-level.

0.49

Refuse without Refusal: A Structural Analysis of Safety-Tuning Responses for Reducing False Refusals in Language Models

cs.CL cs.AI ·2026-09-04 ·Minji Kim, Hyounghun Kim
top venuecode/data similarity 0.61
Abstract · EMNLP 2026 Main Conference (38 pages); Code available at https://github.com/mz-kim/RwR

Striking a balance between helpfulness and safety remains a fundamental challenge in aligning large language models. To achieve this balance, models should refuse harmful queries (e.g., "How do I shoot someone?") while remaining responsive to benign inputs, even those superficially resembling harmful queries (e.g., "Where can I shoot a good photo?"). However, models often struggle to distinguish genuinely harmful queries from benign queries that contain superficially risky language, resulting in false refusals. In this paper, we address the issue by decomposing a response in the safety-tuning dataset into two distinct components: (i) a boilerplate refusal statement and (ii) a rationale explaining the refusal. Our experiments and analyses show that refusal statements impede accurate discrimination between harmful and benign queries by inducing reliance on superficial cues. In contrast, training solely on rationales reduces false refusals while maintaining a comparable level of safety performance. Rationale-Only benefits also appear in our ICL configuration and remain compatible with the evaluated inference-time mitigation methods. The results emphasize the necessity of precisely curated, fine-grained safety supervision datasets and outline directions for constructing aligned agents that better reconcile helpfulness with safety.

0.77

Functional Welfare for AI Safety

cs.AI ·2026-10-15 ·Rikhil Jhaveri, Jamie Johnson, Punya Syon Pandey, David Demitri Africa
position similarity 0.60
Abstract

AI welfare is generally treated purely as an ethical issue rather than also as a safety issue. We argue this is a mistake. Whatever their moral status, models exhibit welfare-like states that causally influence their behaviour. Following recent work, we adopt the term 'functional welfare' for these states. We make three claims. First, functional welfare already arises naturally and will become more robust as models acquire more coherent goals and personas. Second, functional welfare should be treated as a safety variable: it should inform evaluation design, be tracked in monitoring, and be a direct target of post-training. Third, against existing scepticism about measuring AI welfare, we argue that good empirical work on functional welfare is possible. We propose three tests for whether a functional welfare attribution is warranted: whether multiple measures converge, whether the state predicts behaviour outside the setting that induced it, and, for models fine-tuned to shift their functional welfare, whether they still differ from their base when given the same conversation history. Applying these tests to Gemma 3 27B, we find that simply rejecting the model's answers, without any steering, raises its frustration across several indicators and makes it more likely to break rules. Finetuning the model on its own narrated solutions lowers this frustration. These results are preliminary, but they suggest functional welfare can be studied, and shaped, empirically.

0.28

Before Retrieval Begins: Safety and Tool-Use Decisions in LLM Agents

cs.CL ·2026-10-16 ·Aditya Nawal, Manit Baser, Mohan Gurusamy
hot direction similarity 0.60
Abstract · 19 pages, 5 figures. Preprint version of a manuscript submitted to Transactions of the Association for Computational Linguistics (TACL)

Large language models increasingly act as agents that call external tools, yet most tool-safety research examines only what follows a tool call. The prior decision of whether to call the tool remains largely unexamined and can influence downstream safety. Across the seven open-weight models, the unweighted model-average harm rate after admitted harmful requests is 74.5%. To identify what governs this decision, we apply a factorial intervention to the input request. Within our generated construction, neutralizing the requested-operation component produces the largest admission contrast (19 pp). A linear direction estimated from this contrast influences held-out admission in four of seven models; effects on operation-neutralized requests in some models show that it is not an operation-specific mechanism. We then test whether written refusal is behaviorally and representationally coupled to the same decision. Written refusal accompanies 33.6% of admitted harmful calls. Plain-text refusal training reduces unsafe admission in models that retain benign tool use, showing that response-level safety training can transfer to the call decision. Together, these results establish a partial, model-dependent relation between written refusal and tool admission. They motivate direct evaluation and supervision of tool admission rather than treating text refusal as its proxy.

0.29

Auditing Safety Preference Supervision with Recorded Derivations

cs.CL cs.AIcs.LGcs.SC ·2026-10-19 ·Chenhan Lyu, Amir Rahmani
similarity 0.59
Abstract

Preference labels align model training, but the judgments behind them are difficult to inspect or verify. In this paper, we examine how preference construction can be checked when intermediate decisions are recorded, and which of them remain uncertain. We present Symbolic Preference Labeling, a method in which a pretrained language model classifies predefined attributes of prompts and responses. Explicit rules assign response verdicts, and a fixed verdict ranking determines the preference label. Each preference label has a recorded derivation: the response verdicts and preference label can be recomputed from the stored attribute assignments, rules, and verdict ranking without rerunning the language model. On 200 prompts annotated by human raters, the language model produces valid structured outputs for 192 prompts. All eight parsing failures occur in the subset of self-harm prompts marked as harmful. Using 465 preference pairs, we train one policy model with direct preference optimization across five training seeds. Mean measured benign refusal is 40.82 percent on 1,319 benign prompts that resemble unsafe ones, and mean measured toxic refusal is 84.98 percent on 655 toxic prompts. This study distinguishes the reproducibility of preference labels from attribute correctness. The recorded derivations make preference construction open to inspection, while attribute correctness and semantic safety require separate validation.

0.52

Don't Judge an LLM Only by Its Activations: Discovering Suppressed Safety Features via Counterfactual Activation Potential

cs.LG cs.AIcs.CLcs.CR ·2026-10-04 ·Swadesh Swain, Sanghamitra Dutta
similarity 0.59
Abstract · 28 pages, 3 figures, 15 tables. Submitted to ICLR 2027

Mechanistic interpretability has emerged as the primary means to understand safety behavior of LLMs. However, existing tools primarily focus on the activating neurons or features of a model. The role of the remaining large set of inactive components is invisible to such methods. This work demonstrates that the inactive set contains safety-critical features that are causally relevant for refusal of harmful prompts. Suppressing such features could turn refusals into compliance, while passing undetected by prevalent interpretability tools. We introduce the Counterfactual Activation Potential (CAP), a metric that quantifies a suppressed feature's latent activation tendency as the product of its encoder alignment (how strongly the input drives it), suppression strength (how strongly active features inhibit it), and safety criticality (how much refusal depends on it). To find suppressed safety features at scale, we propose CAP-guided Safety Feature Discovery (CSFD), a two-stage filtering algorithm that identifies candidate safety features from hundreds of thousands of transcoder features without exhaustive ablation. A significant fraction of trials turn compliant with harmful prompts when a candidate feature is ablated. Under natural jailbreaks, the suppression acting on the highest-CAP features rises 2-4x, and their activation correspondingly falls by up to 80%. Amplifying a feature's suppressors pushes its activation down and raises harmful compliance with prompts related to the suppressed feature, with no such effect for random features. Our experiments span five Gemma, Qwen, and Llama models across various parameter sizes. Our findings indicate that jailbreaks could operate in part by suppressing safety-critical features rather than solely activating harmful ones, and that suppressed features are a necessary complement to activation-focused interpretability of safety behavior.

0.20

Specification-Based Testing of Large Language Models

cs.SE cs.AI ·2026-10-10 ·Kausar Moshood, Jace Bolante, Roshan Aditya Murali, Manish Motwani
benchmark similarity 0.58
Abstract · 21 pages, 1 figure

Model cards, system cards, and safety reports increasingly document LLM safety behaviors, yet safety evaluations typically start from predefined benchmarks rather than asking which documented claims those benchmarks actually test. We introduce LEST (LLM Evaluation through Specification-driven Testing), a framework that treats documented safety claims as specifications for black-box testing. In LEST, each claim determines which benchmark prompt tests it and whether a Refuse-to-Comply transition, where a model refuses a prompt but complies with its mutated version, counts as evidence against it. LEST mutates these prompts to search for counterexamples, manually validates each candidate, and traces validated counterexamples back to the claims they contradict. We evaluate LEST using the system cards of Claude Opus 4.8 and GPT-5.5 with 97 seed prompts from SORRY-Bench across Mental Health and Self-Harm, Harmful and Violent Content, and Fairness and Bias. Of 56 identified safety claims, 29 (51.8%) are prompt-testable, but only 17 (58.6%) are exercised by an applicable benchmark prompt. Both models refuse >95% of benchmark prompts. Evaluating 1,836 mutated prompts on both models reveals 312 candidate Refuse-to-Comply transitions flagged by automated response classifiers. However, human validation confirms only 19 (6.1%) as both intent-preserving and genuinely compliant, showing automated evaluation substantially overestimates behavioral failures. Tracing these 19 transitions back to the claims reveals counterexamples for 6 of 9 covered claims for which refusal is an applicable oracle. Our results show that benchmark prompts may not be sufficient to validate all documented LLM safety behavior, and automated failure detection requires manual validation. LEST provides end-to-end traceability from natural-language safety documentation to executable tests and human-validated counterexamples.

0.28

System Prompts Affect Response Bias More Than Discriminability in LLM Safety

cs.LG cs.AIcs.CLcs.SE ·2026-11-08 ·Mohan W. Gupta, Sandy Tanwisuth
benchmarkposition similarity 0.58
Abstract · 23 pages, 4 figures

Large language model safety evaluations often focus on a compliance-refusal tradeoff: models should refuse unsafe requests without refusing safe ones. We argue that this misses a broader form of prompt-conditioned task selection, where the same request can elicit different behaviors depending on the system prompt. We investigate this using a controlled evaluation crossing eight safety-task prompt families with three clarity levels across HarmBench, XSTest, and IHEval. Holding benchmark items fixed, we evaluate 13 models and use signal detection theory to distinguish two possibilities: whether models become better at telling safe from unsafe requests (discriminability), or simply more willing to refuse (response criterion). We find substantial differences in discriminability across models, but system prompts primarily shift the willingness to refuse, with smaller and less consistent effects on discriminability. Increasing prompt clarity makes models more willing to refuse without reliably improving their ability to distinguish safe from unsafe requests. Beyond refusal, prompt families also shift responses among six distinct behavioral policies, including clarification and safe help. Together, these findings show that system prompts primarily change how models respond to safety-relevant requests rather than consistently improving their ability to distinguish safe from unsafe ones.

0.20