CS Paper Radar

Generalized PINN-Based Inverse Estimation of Spatially Varying Heat Transfer Coefficients with Transfer Learning

Pradipan Maitra, Jariful Hassan, Arijit Hazra

cs.LG cs.CEmath.NAmath.OCphysics.flu-dyn ·submitted 2026-09-28 21:29 UTC · v1

Abstract

This study investigates generalized boundary representations and transfer learning for physics-informed neural-network (PINN) estimation of spatially varying convective heat transfer coefficients (HTCs) in jet impingement cooling. Piecewise-linear (PWL) and neural-network boundary estimators are inferred from transient interior-temperature measurements and evaluated against CFD-CHT reference HTC profiles at Reynolds numbers of 5000, 10000 and 15000. A discrete Adjoint-FEM formulation with gradient regularization based on the $H^1$-seminorm provides an independent inverse-method comparison. Transfer learning is investigated under two source-target conditions: transfer between noise levels at the same Reynolds number, and transfer from a controlled Gaussian-profile problem to CFD-CHT-derived target problems at different Reynolds numbers. For the representative Re = 5000 target with 5% measurement noise, quadratic, PWL, and neural-network PINNs achieve relative HTC-profile errors of 5.08, 5.31 and 5.19%, respectively, while generalized representations reduce the error for the Re = 15000 target from 16.76% for the quadratic PINN to 14.41% and 14.46%. Transfer learning reduces target-training time by 57.86-81.71% for fixed-Reynolds-number transfer and by 50.59-84.94% for Gaussian-to-CHT transfer. Its effect on reconstruction accuracy is target dependent: fixed-profile PWL transfer remains within 0.30 percentage points of scratch training, whereas Gaussian-to-CHT transfer produces differences of 0.10-1.52 percentage points across targets and representations. These results demonstrate that generalized PINN representations can accommodate spatially varying HTC profiles without a prescribed quadratic form, while transfer learning can substantially reduce target-training cost for repeated inverse estimation, with the resulting reconstruction accuracy depending on source-target compatibility.

Comment
35 pages

Closest papers

Nearest neighbours by meaning across the whole index.

Single-condition neural solvers encode transferable response spaces for parametric differential equations

cs.LG physics.comp-ph ·2026-09-14 ·Wenbo Cao, Weiwei Zhang
similarity 0.61
Abstract

Operator learning for parametric partial differential equations (PDEs) typically builds global models over prescribed domains, requiring cross-condition data or costly physics-constrained training. Here we show that the output Jacobian of a neural solution model trained at one condition defines a reusable response space for cross-condition solution variations. We introduce Linearized Subspace Transfer (LST) to exploit this space and recover target solutions by minimizing the target PDE-system residual over response-space coordinates. Because any single response space has finite coverage, Active Transfer Modeling (ATM) uses post-transfer residuals as coverage indicators to selectively acquire response spaces from additional single-condition models. Across six systems, single-condition response spaces supported cross-condition transfer, with enrichment improving accuracy when added spaces expanded representation capacity. Relative to evaluated physics-informed operator baselines, ATM reduced error and offline construction cost, with orders-of-magnitude accuracy gains in representative cases and millisecond-to-second target adaptation. These results establish neural solvers as reusable local parametric models.

0.25

A Two-Stage Learning PINN Approach for Solving the Inverse Problem of the 1D Porous Medium Equation

cs.AI math.OC ·2026-08-17 ·Noura Al Helwani, Sophie Moufawad, Nabil Nassif
similarity 0.59
Abstract · 54 pages

The Porous Medium Equation (PME), given by $u_t = Δ(u^m)$ for $m > 1$, is a degenerate nonlinear parabolic partial differential equation that arises in various physical applications such as fluid flow in porous media, heat transfer in plasmas, and population dynamics. It is known for its nonlinear diffusion and finite propagation speed. In this paper, we study numerical solutions of the one-dimensional direct and inverse PME using Physics-Informed Neural Networks (PINNs), and compare them with classical numerical methods and available analytical and manufactured solutions. While PINNs provide a flexible framework for solving both forward and inverse problems, we show that the standard inverse formulation suffers from a strong sensitivity to the initial guess, leading to only local convergence. To address this issue, we propose a novel two-stage PINN training framework for the inverse problem, which significantly improves convergence stability and allows reliable recovery of the unknown parameter even for poor initial guesses. Overall, the proposed approach demonstrates that PINNs are a flexible and accurate alternative to classical methods for the 1D PME, and the introduced two-stage training strategy substantially improves their robustness in inverse problems, providing a solid basis for extensions to more complex geometries and higher-dimensional cases.

0.25

Physics-Informed Neural Networks to Infer the Perpendicular Energy Conductivity in the Scrape-Off Layer of Stellarator Devices

cs.AI physics.plasm-ph ·2026-09-10 ·J. Gallego, P. Protopapas, A. Bustos, A. Alonso, S. Barquero +4 more
similarity 0.59
Abstract · 18 pages, 10 figures

In this work, we develop an inverse Physics-Informed Neural Network (PINN) framework to infer the dependence of the scrape-off layer (SOL) perpendicular heat conductivity on plasma density and temperature, $κ_\perp(n,T)$. The method combines radial profile measurements of electron density and temperature with the residual of a reduced one-dimensional SOL transport equation, so that the inferred conductivity is constrained by both the measurements and the underlying transport model. Three neural networks are trained simultaneously: two reconstruct the temperature and density profiles as functions of the radial coordinate and transported power, while a third represents the effective conductivity as a function of the local density and temperature. The framework is first validated using synthetic data generated from a prescribed conductivity function, allowing the inferred $κ_\perp(n,T)$ to be compared directly with the ground truth. The model recovers the imposed functional dependence with errors below $10~\%$ in the data-constrained region. Bootstrap resampling is shown to provide a practical indicator of prediction reliability and consistency. A scan in the number of plasma profiles used for training and the number of radial measurement positions per profile identifies a practical trade-off between reconstruction accuracy and data availability. Finally, the method is applied to an experimental dataset from the TJ-II stellarator obtained with the helium-beam diagnostic. This exploratory application provides an initial estimate of the effective SOL conductivity and illustrates the potential of inverse PINNs for extracting transport information from plasma edge measurements.

0.29

Linearized PINN with pretrained nonlinear layers

cs.LG math.AP ·2026-09-14 ·Wenhao Chen, Alexandre M. Tartakovsky
similarity 0.59
Abstract

We propose a linearized Physics-Informed Neural Network (lPINN), a reduced-order neural basis method for forward and inverse differential equations. In an offline stage, lPINN learns operator-compatible continuous neural basis functions from an ensemble of numerical solutions. The basis functions are differentiable through automatic differentiation and are pretrained using solution data together with either derivative information or physics residuals. For each new problem instance, the basis functions are frozen and the solution is obtained by minimizing the governing-equation residual together with applicable initial, boundary, regularization, and observational terms. Unlike surrogate and operator-learning methods, the training data define the trial space offline, while the instance-specific solution is computed online by enforcing the governing physics. Relative to vanilla PINNs, lPINN pretrains the nonlinear hidden-layer representation offline and performs online inference only in the final linear layer. We evaluate lPINN on forward and inverse problems for the advection-diffusion equation, Burgers' equation, and the nonlinear pendulum equation. Compared with vanilla PINNs, lPINN achieves lower solution and parameter errors while reducing online inference times by approximately one to more than three orders of magnitude, with the largest gains generally observed for limited residual or measurement data. Cross-resolution experiments show that the learned continuous representation can be evaluated on finer meshes without retraining and with nearly unchanged accuracy.

0.22

Adaptive Physics-Informed Neural Networks for the Blasius Boundary-Layer Problem

cs.LG physics.flu-dyn ·2026-08-28 ·Mehari Fentahun Endalew, Xiaoming John Zhang
benchmark similarity 0.58
Abstract · 25 pages

Physics-informed neural networks (PINNs) provide a mesh-free approach for solving differential equations, but their performance can depend strongly on loss weighting, collocation placement, and optimization strategy. This study develops an adaptive PINN framework for the Blasius boundary-layer equation using gradient-norm-based adaptive loss weighting, nonuniform and residual-based collocation, and sequential Adam--L-BFGS optimization. In the representative run using the architecture $[1,100,100,1]$, the model predicts $f''(0)=0.3320762918$, compared with the high-accuracy benchmark $0.332057336215$, giving an absolute error of $1.896\times10^{-5}$. The final weighted loss is $6.789\times10^{-8}$, and the predicted stream-function, velocity, and shear profiles agree closely with an independent numerical boundary-value solution. A separate full-training architecture study shows that the two-hidden-layer model achieves the smallest wall-shear error among the four tested architectures, $1.629\times10^{-6}$, whereas the deepest network attains the smallest weighted objective but a substantially larger wall-shear error. Compared with the previously reported PINN value $f''(0)=0.33165$, the representative run reduces the wall-shear error by approximately a factor of $21.5$. The results show that the combined adaptive training framework can achieve high accuracy for the Blasius problem and that weighted loss alone is insufficient for identifying the most physically accurate PINN. Because the adaptive components are applied jointly, their individual contributions cannot be isolated from the present results and would require a controlled ablation study for separate assessment.

0.22

Physics-informed neural networks in the small-data regime: A controlled comparison with classical PDE surrogates

cs.CE cs.AImath.NA ·2026-11-09 ·Kirill Katsuba, Oleg Rudenko, Egor Bugaev, Alexander Tarakanov
similarity 0.57
Abstract

Neural surrogates for engineering models are often trained on large collections of simulated solutions. We investigate whether physics-informed neural networks (PINNs) can achieve accurate predictions from scarce labelled observations by incorporating governing equations and prescribed initial and boundary conditions. We introduce hierarchical loss weighting (H-PINN) and its gradient-direction-aware extension (HO-PINN), which adjust the emphasis on physical constraints according to higher-priority losses. Hierarchical PINNs are compared with Vanilla PINN, tuned gradient boosting, support-vector regression, and Gaussian-process regression on a heat equation and three heterogeneous two-phase-flow benchmarks. Experiments use 20--1000 labelled states and ten paired seeds. Each label is one coordinate--state observation, not a complete simulation. At least one PINN variant achieves the highest mean primary-target \(R^2\) in each interpolation and equation-assisted forecasting comparison at 20 and 50 labels. The advantage for water saturation persists across all tested budgets. Hierarchical weighting reduces variability across runs in selected settings. These results demonstrate that known physics can support accurate neural surrogate predictions from very few solution observations, at substantially higher fitting cost than the tested classical regressors.

0.22

ALETHEIA: A Multi-Frequency Eddy Current Pulsed Thermography Dataset for Neural Operator Learning in Nondestructive Testing

cs.LG ·2026-11-08 ·Changbin Sun, Jie Xiao, Xiaotian Chen, Yuankai Wu
benchmarkdatasetcode/data similarity 0.56
Abstract · 62 pages, 19 figures

Learning neural solvers for spatiotemporal partial differential equations (PDEs) under real-world constraints remains a key challenge in scientific machine learning, especially for inverse tasks with sparse and noisy boundary observations. We present the Aletheia dataset, the first 3D benchmark for learning data-driven solvers in the context of nondestructive testing (NDT). The dataset simulates eddy-current-induced heating in conductive solids and models the resulting transient heat propagation governed by the heat equation. Aletheia contains over 4,700 high-resolution samples across 10 excitation frequencies (1-100,kHz), each providing volumetric heat source and temperature fields over time. It supports both forward prediction of temperature evolution and inverse reconstruction of internal heat sources or defects from surface infrared measurements. Real infrared thermography data from cracked rail specimens are included for calibration and comparison. We define four canonical tasks on both regular and irregular grids and benchmark them using various neural operators. Aletheia establishes a unified platform for evaluating neural PDE solvers under realistic NDT conditions, enabling progress in reliable, data-driven inverse modeling. The dataset and code are publicly available at https://github.com/sherlock-0327/ALETHEIA.

0.42

Learned Warm Starts for Steady Transonic RANS Simulations of Wing and Aircraft Configurations

cs.CE physics.flu-dyn ·2026-10-31 ·Muhammad Irfan Zafar, Saleh Abuhanieh, Şahin Yiğit
similarity 0.56
Abstract

Neural surrogates can accelerate many-query aerodynamic analyses, but their standalone predictions may be insufficiently accurate or robust to support reliable design evaluations. We develop a learned warm-start formulation that predicts mean-flow and turbulence fields directly on native CFD meshes for subsequent correction by the RANS solver. A common architecture and objective structure are used across subcritical and transonic flows, including challenging conditions with shock-induced separation. A condition-modulated Transolver combines Fourier and wall features with target-gated regularization, a Sobolev-type loss, adaptive loss weighting and sampled training. Prediction requires no preliminary flow solution, and training requires no solver-residual evaluation. Extensive 3D CFD evaluations on SuperWing, the NASA Common Research Model (CRM) and DLR-F6 assess geometric and operating-condition generalization, including interpolation, extrapolation and cross-mesh deployment, using Spalart-Allmaras and $k$-$ω$ SST closures on million-cell meshes. Unseen nominal cases achieve geometric-mean iteration speed-ups of approximately $2$-$4\times$ under a common convergence criterion based on cold-run aerodynamic coefficients. On CRM, learned initialization provides greater aggregate acceleration than nearest-condition restarts using the same solution library. Resolution invariance enables direct deployment of coarse-mesh models on finer meshes without retraining, solution interpolation or target-condition coarse solves. Including data generation and training, estimated campaign speed-ups reach $2.1$-$2.3\times$. No warm run diverges; fewer than $2\%$ fail to satisfy the cold-reference convergence criterion. These results support learned initialization for repeated aerodynamic analyses, while highlighting initialization sensitivity near separation as a remaining limitation.

0.06