CS Paper Radar

MeshRepair: Autoregressive Topology Repair for Generated Artisan Meshes

Xiyu Wang, Yufei Wang, Ruocheng Wu, Zhihao Li, Lanqing Guo, Bihan Wen

cs.GR ·submitted 2026-10-09 06:33 UTC · v1
benchmark

Abstract

Recent artisan mesh generation methods produce meshes whose topology comes close to the preferences of human artists. But gaps to artist quality remain because generated meshes commonly contain holes, stray faces, and duplicated faces. Regenerating a mesh from scratch is costly, and a new draw may change the preferred topology entirely or introduce errors elsewhere. In this work we study artisan topology correction. The task is to correct the topology of a generated mesh (the draft) in place, toward the layout an artist would make. We propose a method for this task. It is a face-level correction network based on a prefix-LM. It reads the mesh bidirectionally and emits an edit sequence autoregressively. The sequence consists of a deletion phase followed by an addition phase. We propose the novel formulation of the deletion head which picks faces to delete autoregressively and the addition head that selects vertices to form a face to add. The addition head also adds vertices when needed. Untouched faces pass through unchanged, so the corrected mesh keeps the vertices and the layout of the draft. The draft enters as a prefix and only the edits are generated. A correction therefore takes far fewer decoding steps than generating every face again with an autoregressive mesh generator. We benchmark our method against repair tools on scripted defects and on held-out drafts from two mesh generators. Across both scripted defects and generated drafts, our method improves the quad-equivalent face F1, removes non-manifold faces, and cleans up the topology.

Closest papers

Nearest neighbours by meaning across the whole index.

TaoFlowForge: Progressive Native Mesh Generation via Cascaded Flow Matching

cs.CV ·2026-09-29 ·Xianze Fang, Qiyuan Feng, Dongfang Sun, Yan Zhang, Xiuchao Wu +4 more
datasetcode/data similarity 0.65
Abstract

3D content generation technology has significantly advanced the work of designers, as well as the 3D printing and gaming industries. However, it remains difficult to produce lightweight, editable, and topologically clean artistic content that is directly production-ready. To achieve this, we present TaoFlowForge, an artistic mesh foundation model that generates production-ready meshes. Specifically, TaoFlowForge decomposes the mesh generation process into vertices generation and their connectivity prediction, i.e., edges. We formulate vertices generation as a two-stage coarse-to-fine process and incorporate several effective loss functions to further enhance its performance. In the connectivity prediction stage, we propose a simple yet effective method for estimating the connectivity affinity between vertices and additionally predict per-vertex normals, which determines the correct orientation of faces. Besides, we construct a large-scale dataset combining hand-crafted 3D assets with public high-quality topology datasets. Based on this, a carefully designed data curation pipeline is employed to filter the raw dataset, retaining only high-quality topology data for model training. Our model is trained on the combined dataset and tested on both out-of-distribution hand-crafted set of 3D assets and public datasets. Under image-conditioned generation, TaoFlowForge outperforms autoregressive methods and achieves state-of-the-art results among open-source mesh topology generators. We will release all the code and weights together with a portion of our test dataset.

0.37

MeshOctave: Vertex Split-and-Rewire Cascades for Native Mesh Generation

cs.CV ·2026-09-30 ·Junkai Lin, Tianhao Zhao, Hang Long, Huipeng Guo, Jielei Zhang +8 more
similarity 0.62
Abstract

Generating compact, artist-style meshes with explicit topology typically relies on autoregressive models which incur prohibitive sequential per-token costs, or continuous flow models that depend on heuristic connectivity decoders. Next-scale generation paradigms offer a compelling alternative by enabling parallel intra-scale token prediction and coarse-to-fine refinement from global structure to local topology; yet, existing methods derive hierarchical scales via progressive mesh simplification and invert them sequentially. This eliminates intra-scale parallelism and scales generation steps linearly with face count. In this paper, we propose MeshOctave, which instead defines scale through dyadic spatial grid resolutions, framing coarsening as a deterministic collapse that merges vertices sharing a voxel cell and inherits connectivity. Its inverse operation, split-and-rewire, determines which octant sub-vertices are instantiated for each coarse face and resolves local connectivity using discrete structural tokens. These per-face operations require no serialization, each scale transition is modeled as an unordered set that adds one bit of coordinate precision, naturally supporting dynamic-length meshes and adaptive resolution refinement. We construct a scale-conditioned masked-uniform discrete diffusion model to learn split-and-rewire operation from resolution collapse hierarchies. MeshOctave outperforms strong baselines in geometric fidelity and topological validity by a non-trivial margin, while supporting adaptive resolution refinement and extending naturally to mesh subdivision tasks.

0.27

MeshCarve: Artisan Mesh Generation with Flow Matching in Compact Latent Spaces

cs.CV ·2026-10-07 ·Xiyu Wang, Ruocheng Wu, Yufei Wang, Zhihao Li, Lanqing Guo +1 more
hot direction similarity 0.61
Abstract · 18 pages, 6 figures, 9 tables

Prior artisan mesh generation works largely predict face tokens autoregressively, which makes inference slow. Recent methods instead flow match continuous latents built by Variational AutoEncoders (VAEs), but reconstruction quality drops significantly when geometry and topology are jointly encoded, and further when the latent space is compressed. We present MeshCarve, a flow matching method that generates entirely in compact latent spaces, generating vertex positions and edge connections separately and sidestepping the difficulty of a joint compact latent. To shorten the token sequence, we propose a hierarchical sparse transformer backbone, instantiated as VertexVAE and EdgeVAE. Instead of encoding fields over the surface voxels, both VAEs anchor on discrete vertices in their latent spaces, which drastically reduces the token sequence length, and our spatial-aware compression shortens it further without costing reconstruction. VertexVAE directly encodes vertex occupancy. For connectivity, we propose vertex-link encoding, which turns arbitrary connectivity between vertices into fixed-length continuous per-vertex embeddings and recovers complex artistic topology faithfully. MeshCarve combines these VAEs with an anchor generator and flow matches on the shortened token sequences. It shows advantages over state-of-the-art autoregressive and flow matching methods on Objaverse and generalizes to Toys4K. To the best of our knowledge, it is among the first artisan mesh generation methods whose every generative stage runs in a spatially compressed latent, with a token sequence only a fraction of the most compressed previous autoregressive and flow matching works.

0.48

RemeshingAgent: An Iterative Agent for Repair-Based Decimation of Generated Building Meshes

cs.GR ·2026-11-16 ·Haipeng Wang
similarity 0.59
Abstract · 11 pages, 12 figures, 3 tables

Aggressively simplifying a generated high-poly building mesh to 0.5-1% of its faces confronts a hard limit. The surface looks complete, yet the mesh is topologically shattered: 10^3-10^4 connected components and non-manifold thin walls. Below a certain budget, every practical decimator "melts": it deletes parts, welds thin walls, or breaks the error tolerance. We attribute this to instance-specific pathology: which components are significant and where the cliff sits vary from mesh to mesh, so no single fixed algorithm suffices, and decimation becomes an iterative loop of cleaning, simplifying, and verifying. We present RemeshingAgent, an agent that turns this loop into a validated process. The melting follows from a triangle-budget decomposition into curvature, crease, component, and genus terms: below the component floor, no output satisfies the repair contract, and cleaning first is the theory-mandated response. At a 0.5% budget the agent stays topology-clean where QEM and vertex clustering melt, matches a commercial remesher on 20 unseen city buildings, and on the 24 training buildings a nine-participant single-workstation blind study prefers our outputs 168:48 (p = 0.0195, subject-level sign test). The trained skill deploys as retrieval replay: 11.7 seconds per mesh on CPU, with no LLM calls.

0.29

Q-MAGIC: Quad-only Mesh Autoregressive Generation via Singularity-Aware Circular Relative Offset Tokenization

cs.CV cs.GR ·2026-10-14 ·Yuming Zhao, Zezeng Li, Weimin Wang, Xiang Wu, Na Lei
published similarity 0.59
Abstract

Autoregressive models have proven effective for triangular mesh generation by transforming it into predicting the next face, converting the non-differentiable connectivity prediction into a sequence of token predictions. However, generating quad-only meshes remains challenging because quad faces impose stricter topological constraints than triangles. The model must not only serialize quad faces into a valid token sequence, but also support unambiguous connectivity reconstruction during de-serialization. To address this, we propose Q-MAGIC, a novel autoregressive model for quad mesh generation. We first introduce a tailored serialization scheme for quad meshes, which requires at least two new vertices for the next face and is less flexible than triangles due to strict wiring constraints. To meet these requirements and reduce serialization length, we propose a singularity-aware serialization that prioritizes wiring from singular points, leading to more coherent traversals. Additionally, we propose a circular relative offset tokenization that encodes geometry mainly via local relative offsets. Built upon this representation, an autoregressive Transformer learns the underlying distribution of quad meshes via next-token prediction, enabling effective quad mesh generation. Extensive experiments demonstrate that Q-MAGIC produces more compact sequences while consistently improving geometric fidelity and mesh quality compared to state-of-the-art methods.

0.23

SubDGuide: A Modeler-Inspired Agentic Workflow for Mesh-to-SubD Reconstruction

cs.GR ·2026-10-08 ·Mengnan Jiang, Christian Franke, Michele Franco Adesso, Antonio Haas, Grace Li Zhang
similarity 0.55
Abstract · 18 pages, including supplementary material

Subdivision surfaces represent free-form geometry through a sparse control cage, but recovering that cage from a dense mesh is not merely a fitting problem: the system must infer where control is needed, which curves encode design features, and when an initial result should be revised. We present SubDGuide, a modeler-inspired agentic workflow for this task. Stage A reads aligned multiview geometric evidence and produces a compact plan for cage resolution, feature mapping, and broad-form fitting. Stage B inspects the resulting surface, requests targeted diagnostics, and chooses repair, rollback, or stopping actions. Geometry tools execute and verify every change; the planner never generates vertices or connectivity. On a fixed evaluation cohort, SubDGuide improves all five reported metrics over automatic remeshing: median Chamfer-L1 decreases from 0.641% to 0.443% of the target bounding-box diagonal, and F-score at a 1% tolerance increases from 82.00% to 92.78%. Stateful feedback improves four of five reported median metrics over one-shot planning, while verification retains the earlier checkpoint when a proposal is unhelpful. The same interface supports six multimodal planners, showing how semantic judgment can guide a practical, inspectable mesh-to-SubD workflow.

0.15

Learned Localized Mesh Refinement

cs.CG ·2026-09-25 ·Xiao Zhan, Chrystiano Araújo, Kangle Deng, Maneesh Agrawala, Hsueh-Ti Derek Liu +1 more
top venuecode/data similarity 0.55
Abstract

We present a neural method for adaptive triangle mesh refinement, in which an autoregressive model adds geometric detail to selected regions of an input mesh while leaving the rest unchanged, a key capability for efficiently allocating mesh budget. Existing upsampling methods struggle to achieve this. Classical subdivision schemes refine triangulation without semantic awareness of the underlying shape or the ability to recover geometric details missing from a coarse input. Recent neural mesh models generate shapes globally, sacrificing region-specific control. We propose a novel tokenizer that yields combinatorially many valid upsampling trajectories from a single mesh. Trained on such data, our locally-conditioned autoregressive architecture allows for direct manipulation of topology and geometry within target regions of an input mesh. We validate our method against state-of-the-art approaches and demonstrate its ability to perform adaptive upsampling with region-selective control, a capability absent from existing approaches. This unlocks inference-time view-dependent refinement, physics-aware region refinement, and coarse-shape conditioned novel mesh synthesis. We provide code at https://github.com/seanxzhan/learned-localized-mesh-refinement/.

0.43

Mind the Gap: Mesh-Guided Repair of Broken Vessels

cs.CV ·2026-09-24 ·Gniewosz Drwiega, Wojciech Szymanski, Marek Wodzinski
published similarity 0.55
Abstract · Accepted at ShapeMI 2026 (Shape in Medical Imaging), MICCAI 2026 Workshop. 17 pages, 5 figures, 3 tables

Vessel segmentation is commonly optimized as voxel-wise classification, but small local errors can strongly disrupt vascular connectivity while having little effect on overlap scores. This is particularly problematic for downstream analyses that rely on centerlines, branches, connected components, or graph structure. We propose a mesh-guided post-processing framework for repairing broken vessel segmentations produced by nnU-Net. For each predicted binary mask, a deformable template mesh is fitted to the mask surface in physical space and used as a case-specific geometric scaffold. The fitted mesh is not voxelized as the final segmentation; instead, it guides conservative reconnection of disconnected components by proposing or validating thin bridge candidates under foreground-growth constraints. We evaluated this approach in three vascular anatomies using AortaSeg24 and SEGA for the aorta, TopCoW for the Circle of Willis, and PARSE for the pulmonary arteries. Performance is measured using Dice, connected-component Dice (ccDice), and the Betti-0 number. Across these datasets, repair substantially improved connectivity while preserving overlap: Dice remained nearly unchanged, whereas ccDice increased from 0.596 to 0.992 for aorta, from 0.722 to 0.835 for TopCoW, and from 0.028 to 0.862 for PARSE. The FOMAML meta-initialization further accelerated the fitting per-case, supporting practical mesh-based repair of the vascular topology. These results suggest that explicit mesh representations can provide a useful geometric prior for correcting topological failures in otherwise accurate voxel segmentations.

0.33