CS Paper Radar

Refine Where It Matters: Contact-Adaptive Meshing for Deformable Object Manipulation

Gabriel Johnson, Tom Olesch, Fei Liu

cs.RO ·submitted 2026-10-09 14:39 UTC · v1
hot direction

Abstract

Deformable-object manipulation requires accurate modeling of highly localized contact while maintaining simulation speeds suitable for interactive use. Uniformly fine tetrahedral meshes can resolve these interactions, but they introduce unnecessary degrees of freedom throughout the object. Coarse meshes are more efficient, yet they may under-resolve contact-induced deformation. We present a contact-adaptive mesh refinement framework that introduces spatial resolution only where it is most useful. The method uses geometric, elastic, and contact quantities already available from the deformable-body solver to score candidate edges. A fully GPU-parallel procedure then selects a conflict-free subset and updates both mesh topology and physical state directly within the simulation loop. We evaluate the approach on real deformable-object manipulation sequences. Adaptive refinement reduces simulation-to-real error, improves agreement with a fine-mesh reference, and remains substantially more efficient than uniformly fine simulation. These results show that local refinement can improve physical fidelity without incurring the cost of a globally fine discretization. The framework provides a practical basis for contact-rich simulation in interactive manipulation, sim-to-real modeling, and online physical digital twins.

Closest papers

Nearest neighbours by meaning across the whole index.

CRISP: Contact-Rich Robotic Simulation Platform with Extensive Geometries and Contact Solvers

cs.RO ·2026-09-18 ·Somang Lee, Sunkyung Park, Jinhee Yun, Seoki An, Dongjun Lee
code/data similarity 0.76
Abstract · 12 pages, 8 figures. Project website: https://inrol.github.io/crisp/

We present CRISP (Contact-RIch Simulation Platform), a high-fidelity physics engine tailored for complex multi-contact simulations such as tight-tolerance robotic manipulation. Achieving high physical fidelity in robotic simulation requires both expressive modeling of geometry and contact interactions, as well as accurate numerical resolution via robust collision detection and contact solvers. However, existing simulators often either rely on limited support for geometric representations and simplified modeling of contact interactions, or employ numerical resolution methods whose accuracy or robustness is inherently constrained. Accordingly, we develop a new simulator that supports diverse geometric representations with accurate optimization-based collision detection, and combines contact modeling with robust augmented Lagrangian-based contact solvers. This integration enables efficient and consistent detection of contact information across complex geometries while accurately resolving multi-contact constraints without problematic relaxations, which is essential for simulating contact-intensive and sharp interactions. We validate the physical fidelity of our simulator against state-of-the-art platforms and further demonstrate its capabilities through complex robotic manipulation scenarios. CRISP is publicly available at https://github.com/INRoL/crisp.

0.68

DiffGIPC: Differentiable Mixed-Coordinate Contact Mechanics on GPU

cs.GR cs.ROeess.SY ·2026-10-13 ·Kemeng Huang, Bowen Ren, Xinyu Lu, Minchen Li, Taku komura
similarity 0.73
Abstract

Contact-rich inverse problems require efficient gradients and reliable enforcement of non-penetration. Existing differentiable methods provide fast simulation and rigid-deformable coupling, but contact treatments based on penalties or velocity-level constraints can permit penetration or positional drift. Incremental Potential Contact (IPC) maintains non-penetration through geometric barriers and {continuous collision detection (CCD)}. However, repeated forward and backward evaluations remain costly in full-space finite-element (FEM) implementations, particularly when nearly rigid components retain many vertex {degrees of freedom (DoFs)}. We present DiffGIPC, a GPU-accelerated differentiable IPC framework for optimizing interacting deformable and nearly rigid bodies. Our affine-body derivatives enable {rest-shape} design, initial-state optimization, and articulated control while retaining only twelve motion DoFs per affine body. These gradients account for how changes in geometry, placement, and actuation affect other objects through collision and friction. We preserve these interactions in one coupled FEM-affine adjoint system per frame, reducing the backward-system size without discarding the dependencies that drive the inverse problem. GPU-optimized backward computation further reduces the cost of repeated gradient evaluations. A reusable PyTorch interface connects supported physical parameters to user-defined parameter maps and losses across design, identification, motion, placement, and articulated control. Experiments demonstrate peak speedups over DiffIPC of approximately 150.0x with full-space FEM and 4133.3x with affine bodies for combined forward simulation and backward differentiation.

0.30

AIM: Adaptive Interaction Modeling Networks for Real-to-Sim Soft-Body Simulation

cs.RO ·2026-10-05 ·Tiancheng Yang, Dingshuo Chen, Tianle Chen, Zhaocheng Liu, Qiang Liu
similarity 0.70
Abstract

Deformable-object manipulation is essential for robotic tasks such as folding laundry and handling food, where robots must control shape changes as well as object motion. Predictive soft-body simulation supports these tasks by anticipating deformation under external interactions. However, spatial neighborhoods can misrepresent deformation dependencies, introducing local errors that accumulate over successive predictions. Models fitted to individual scenes must also accommodate changes in object geometry and manipulation conditions. In this work, we propose AIM, an Adaptive Interaction Modeling framework that treats real-to-sim soft-body simulation as a local-global interaction modeling problem. AIM uses motion history and geometry to adapt particle relations over current spatial neighbors and retained connections, while geometry-conditioned global communication coordinates object-wide responses. A unified kinematic control-point interface represents different manipulation configurations, and multi-step autoregressive supervision trains the model on its own predicted trajectories. Experiments on PhysTwin and PGND demonstrate improved motion accuracy and visual fidelity, with a 20.0% reduction in future-prediction tracking error relative to PhysTwin and a 22.8% reduction in mean long-horizon particle error across six object categories relative to PGND. The framework further supports transfer across actions, object instances, and scenes, including zero-shot transfer from robot interactions to human manipulation without target-domain dynamics fitting.

0.21

Lodos: A Lightweight Simulator Designed for Contact-Rich Interactions with Detailed Meshes

cs.RO ·2026-11-06 ·Onur Beker, Andreas René Geist, Georg Martius
code/data similarity 0.68
Abstract

In recent years, massively parallelized rigid-body simulation has played a central role in robotics research, enabling rapid progress in areas such as reinforcement learning, stochastic optimal control, and randomized smoothing-based trajectory optimization. Particularly in contact-rich settings, the scalability of such simulations in large part depends on well-optimized representations of collision geometry, often requiring a coarse approximation of the underlying surfaces using primitives such as spheres, capsules, cylinders, and boxes. Whenever the complexity of the surfaces or the precision demands of the application render such approximations insufficient, it is instead necessary to employ mesh-mesh collisions, which impose a significant reduction in throughput. This paper proposes a simulation framework designed from scratch to address this bottleneck, with novel routines for broadphase and narrowphase collision detection as well as the subsequent contact dynamics computation. As experimentally validated, the framework matches existing well-established simulators in terms of physical faithfulness, and can achieve approximately an order of magnitude higher throughput in the detailed mesh-mesh collision setting that it specializes in. The source code is available at https://github.com/martius-lab/lodos.

0.45

RFW-S: Everyday Deformable Objects with Independent Simulation Verification

cs.RO cs.CV ·2026-11-17 ·Jiarui Guo, Saining Zhang, Jiaying Wan, Jiawei Weng, Junhao Chen +13 more
datasetcode/data similarity 0.68
Abstract · 34 pages, 19 figures. Project Page: https://sjijs.github.io/RFW-S_website/

Large-scale robotic simulation requires diverse deformable objects with executable physical properties and realistic interaction behaviors. However, existing 3D asset collections primarily emphasize visual diversity, while scalable physical construction and verification remain challenging. We introduce RFW-S, a large-scale dataset of 83,365 simulation-verified assets spanning 485 everyday categories across five structural families: soft solids, cloth sheets, shells, garments, and bags. We develop an automated pipeline integrating reference-guided 3D generation, structure-aware physical modeling, and LLM-assisted parameter estimation and calibration. To ensure physical reliability, we introduce an independent simulation verification framework that evaluates object behaviors under interactions distinct from those used for parameter calibration. Extensive experiments demonstrate the effectiveness of independent verification and characterize deformable responses under different physical configurations. We further evaluate robotic grasping in terms of both task success and object integrity, and demonstrate the physical realism of our simulated objects through sim-to-real replay of fragile-object manipulation. RFW-S provides a scalable foundation for physically grounded simulation and embodied robotic learning.

0.23

Total Deformation-based MPM for Perfectly Elastic Solid Simulation with Strong Deformations

cs.GR ·2026-10-27 ·Timna Böttcher, Rick Ridder, Jan Bender
similarity 0.66
Abstract

We present a new MPM-based solver for perfectly elastic solids, which can recover from strong deformations and naturally allows contact handling. Typical MPM solvers suffer from numerical fracture, where objects break apart even when no plasticity is included in the elasticity model. Previous approaches for perfectly elastic solids solve this by computing forces on a fixed grid in the reference configuration. However, this makes them incompatible with standard collision handling methods. We instead propose a method for deformable solid simulation without numerical fracture, that still computes elastic forces on the current grid. Our method can easily include grid-based collision handling, as commonly used in MPM frameworks. Additionally, we compute the deformation directly from the particle positions and a fixed reference grid, without any updates based on velocity gradients. This facilitates the inclusion of particle-level collision handling and zero-energy mode suppression, which counteracts artifacts from non-linear deformations. As a result, we can efficiently simulate complex scenarios of elastic objects undergoing large deformations, including contact.

0.24

CoDimRecon: Agentic Reconstruction of Sim-Ready 3D Scenes with Deformable Curves, Surfaces, and Volumes

cs.CV cs.GRcs.RO ·2026-09-28 ·Shuzhao Xie, Lelin Wang, Guying Lin, Zhi Wang, Minchen Li
similarity 0.66
Abstract · https://shuzhaoxie.github.io/CoDimRecon/

Reconstructing simulation-ready 3D scenes from real-world observations enables robotics, gaming, and immersive applications, yet existing methods largely assume rigid objects. This leaves an important gap for deformables, whose simulation-ready geometry depends on dimensionality (curves, surfaces, or volumes) and whose behavior may require models beyond elasticity. We present CoDimRecon, an agentic framework that reconstructs editable scenes containing rigid, articulated, and deformable objects from multi-view RGB observations. Scene-level geometric priors ground scale and layout, while object-level generated meshes guide the agent toward detailed, compact geometry; articulated rigid objects are decomposed into movable parts with explicit joints. For deformables, category-wise agent sessions reconstruct curves as centerlines with radii, surfaces as manifold shells with thickness, and volumes as watertight solids for volumetric meshing. Reusable simulator skills initialize compatible physical models and parameters, while agent-guided behavioral tests expose mismatches and trigger targeted revisions of motion, geometry, numerics, or material modeling. On evaluated Replica and ScanNet++ scenes, CoDimRecon achieves competitive compositional reconstruction accuracy while additionally producing deformable assets for rod, shell, and solid simulation. We further demonstrate robot interactions across all three representations, including a controlled paper-folding case in which behavioral testing motivates plastic bending.

0.48

WorldContact: A Contact-Centric World Model for Scalable Robot Learning

cs.RO ·2026-09-17 ·Caoliwen Wang, Mengdi Wang, Heng Zhang, Shixun Huang, Siyuan Chen +5 more
similarity 0.65
Abstract

Adapting robots to new objects and tasks requires interaction experience that can be costly to obtain. We present WorldContact, a contact-centric world model for deformable-object manipulation, constructed from a limited set of high-quality trajectories to generate additional training data efficiently. It predicts object dynamics using larger time steps than the source numerical simulator, which requires small integration steps to resolve rapid motion and prevent interpenetration. We evaluate WorldContact across 16 shopping-bag manipulation tasks. State-rollout measurements on a single H100 GPU show a $10\times$ speedup over the source simulator, excluding rendering and disk I/O. We use the generated data to fine-tune an existing vision-language-action policy and deploy it directly on a real robot. In bag lifting, the same policy achieves 65% single-attempt success when fine-tuned on source simulation data alone, compared with 95% when fine-tuned on the dataset expanded with WorldContact. These results support efficient data generation with WorldContact for robot policy adaptation.

0.22