CS Paper Radar

RADIUS-Assisted Companion PSK Discovery: Enabling WPA3-SAE in Externally Authenticated Multi-PSK (ePSK / MPSK / DPSK / iPSK / PPSK) Deployments

Azif Abdul Salam Kolisam Beevi, Anil Kumar Reddy, Niraj Lochan Mahapatra

cs.NI ·submitted 2026-10-10 00:17 UTC · v1

Abstract

Large multi-dwelling unit (MDU), student-housing and hospitality networks rarely store resident pre-shared keys (PSKs) on the access point (AP). Instead, the per-resident keys of ePSK, MPSK, DPSK, iPSK or PPSK services are held in an external RADIUS server or cloud database synchronised with the property-management system. Our earlier work, Companion-BSSID-Assisted PSK Discovery (CAPD), brought WPA3-SAE to multi-PSK networks by learning the client's PSK on a WPA2-only companion BSSID and steering the client with IEEE 802.11v to a hidden WPA2/WPA3 primary BSSID of the same SSID. CAPD assumes that the AP can test every PSK itself. This paper removes that assumption. We propose RADIUS-Assisted Companion PSK Discovery (RA-CAPD). The AP forwards the ANonce, the raw EAPOL-Key message 2 (SNonce, MIC, RSNE), the SSID, the client MAC, the BSSID and the AP MAC to the external server in RADIUS vendor-specific attributes (VSAs). The server validates the MIC against all provisioned keys, identifies the matching PSK, and returns it encrypted under the RADIUS shared secret (or a per-AP key for cloud databases), together with the unit, room or user identity and the VLAN. The AP binds the client to this PSK and identity, synchronises the binding across all APs in the domain, and moves the client to the configured profile: 802.11v-capable clients via a BSS Transition Management request, and other clients by disconnection and reconnection. On that profile, SAE-capable clients complete WPA3-SAE and WPA2-only clients complete WPA2-PSK, both with the learned key and no further search, so the companion BSSID serves only for onboarding. We present the design, attribute dictionary, algorithms, complexity and security properties, together with laboratory validation on commercial access points.

Comment
18 Pages, 5 flow charts, 8 Tables

Closest papers

Nearest neighbours by meaning across the whole index.

Fast BSS Transition for Multi-PSK Community Wi-Fi in MDU Networks: Fragmented RADIUS Key Delivery, Server-Derived PMK-R0/PMK-R1 Distribution through a Cloud Management API, and Lease-Driven Key Revocation

cs.NI ·2026-10-16 ·Azif Abdul Salam Kolisam Beevi, Anil Kumar Reddy
similarity 0.82
Abstract · 30 Pages, 8 Figures, 20 tables

Multi-dwelling-unit (MDU) properties increasingly deploy one community-wide SSID on which every unit or resident has its own pre-shared key, mapped to its own VLAN so that each unit is a separate network. Vendors name this capability differently (ePSK, iPSK, MPSK, DPSK, PPSK); we call it multi-PSK (mPSK). When the keys are held in an external RADIUS server or a cloud controller, the access point (AP) must ask the key server to identify a client's key. Enabling IEEE 802.11r Fast BSS Transition with WPA2-PSK (FT-PSK), which large properties need for roaming voice and video, breaks this exchange in three ways. First, the server must identify the key from an FT handshake whose MIC depends on the FT key hierarchy. Second, the RADIUS messages no longer fit: EAPOL-Key message 2 and the key material the AP needs both exceed the 247-octet value capacity of a RADIUS vendor-specific attribute (VSA). Third, the AP a device roams to needs a PMK-R1 for that device, and all key material must disappear when the resident leaves. We present FT-mPSK. The key server identifies the PSK, derives PMK-R0 and PMK-R1, and returns the serving AP's keys in a two-fragment Key-Bundle VSA that the AP reassembles and authenticates before decryption. It then calls one POST API on the cloud management system, which pushes PMK-R0 to the primary AP. On a roam, the target AP obtains PMK-R1 from the primary AP, located by the R0KH-ID in the FT Authentication Request, or from the key server. When the Property Management System reports a move-out or lease end, the key server issues the same POST as a delete keyed by the resident's mPSK username, and every AP purges that username's PSK, PMK, PMK-R0 and PMK-R1. We specify the external-RADIUS and cloud-controller methods, the attribute and fragment formats, the API, algorithms, size budgets, complexity, security properties and the validation plan.

0.13

Fast and Secure Simultaneous Authentication of Equals for WPA3

cs.CR cs.NI ·2026-09-25 ·João Ferreira, André Zúquete, Hélder Gomes
similarity 0.59
Abstract · Submitted to the 2026 IEEE International Conference on Cyber Security and Resilience (IEEE CSR), August 2026, Lisbon, Portugal

The Simultaneous Authentication of Equals (SAE) protocol, introduced in WPA3, provides robust protection against offline dictionary attacks against a network Pre-Shared Key (PSK) and also protection of session keys from other people knowing that PSK. However, its high computational cost for the Password Element (PE) derivation makes Access Points (APs) vulnerable to CPU exhaustion Denial-of-Service (DoS) attacks. This paper proposes a resilient architectural modification to SAE. First, we introduce an asymmetric resource cost model that offloads the iterative discovery of cryptographic elements to the client, allowing the AP to maintain a fixed computational load during the handshake. To further mitigate brute-force attempts, we implement a mechanism based on a slow-path key derivation (with variable cost key derivation functions, such as PBKDF2 or Argon2), incorporating a deliberate processing delay on the supplicant. Finally, we introduce a ticket-based mechanism to facilitate efficient re-authentication for known devices, bypassing expensive exchanges while preserving system availability under adversarial conditions. Experimental results demonstrate that this architecture significantly mitigates DoS risks without compromising legitimate network access.

0.27

Protocol Integration of Physical Layer Deception into EAP-TEAP Wi-Fi Authentication

cs.CR cs.NI ·2026-10-01 ·Moustafa Ibrahim, Bin Han, Hans D. Schotten
code/data similarity 0.54
Abstract

Credential-based Extensible Authentication Protocol (EAP) authentication cannot distinguish a legitimate credential holder from an adversary using compromised credentials. Physical Layer Deception (PLD) complements credential-based authentication by exposing a deceptive primary object over a primary transport while a separate recovery object travels with differentiated reliability over a secondary channel. Existing PLD studies remain, to our knowledge, at the physical/link-model level; using PLD's activation/deactivation mechanism as an authentication gate creates an authentication-specific design requirement, since an all-inactive attempt would exercise no recovery path. We present a batched PLD-based re-verification step for Enterprise Wi-Fi's TEAP/RADIUS/IEEE 802.11 authentication chain, implemented end to end across the server, access point, and device in the open-source hostap 2.12 codebase. Each attempt carries three rounds, at least one active, with no dedicated activation flag. Across four campaigns totaling 1593 attempts, the prototype evaluates batched recovery behavior, rejects the implemented naive credential-bearing attacker in all 30 attempts, measures successful-path latency, and evaluates the security-reliability trade-off for one, two, and three active rounds under two modeled recovery regimes. The evaluation exercises the protocol and software-MAC behavior directly and analyzes informed and retry-seeking attackers under the software recovery model.

0.32

Post-Quantum Migration of Wi-Fi Key Establishment: A Hybrid ML-KEM Design for OWE and FILS, Validated on OWE with hostapd

cs.CR cs.NI ·2026-11-16 ·Jesús R. Abascal, Ana I. Gómez, Domingo Gómez-Pérez
similarity 0.51
Abstract · 8 pages, 4 figures, 4 tables

The key agreements that protect a Wi-Fi connection rely on Diffie-Hellman, which a sufficiently capable quantum computer would break; an adversary can therefore record an association today and decrypt its traffic years later. Key establishment is thus the part of IEEE 802.11 that has to be migrated first. This work targets the two protocols that perform that agreement inside the frames used to set up the link: Opportunistic Wireless Encryption (OWE), which encrypts otherwise open networks, and Fast Initial Link Setup (FILS), designed for fast connection in dense and mobile deployments. We propose replacing their Diffie-Hellman exchange with a hybrid one that runs the classical elliptic-curve agreement alongside ML-KEM (FIPS 203) and derives the master key from both secrets, so the connection stays protected as long as either component remains unbroken. The exchange reuses the frames each protocol already sends and adds no extra round trip; an access point can advertise the hybrid mode alongside classical OWE, and a station configured to require it refuses to associate without a completed post-quantum exchange. Binding the advertised capabilities to the derived key is specified as a design extension and is not part of the prototype. We validate the design with a working implementation on hostapd and wpa_supplicant: both endpoints derive the same key in every measured connection, with the two smaller parameter sets each enlarged association frame fits in a single frame even under a conservative 1500-byte fragmentation threshold, and the added connection time and computation stay below half a millisecond. The measurements are obtained on OWE; the design carries over to FILS, whose frame budget is left for specific measurement. Of the three ML-KEM parameter sets, the intermediate one offers the best balance between security level and size.

0.48

Association-based Privacy Attacks in Wireless Protocols: Formal Modeling and Mitigation

cs.CR cs.NI ·2026-08-11 ·Mohit Kumar Jangid, Felix Engelmann, Zhiqiang Lin
similarity 0.49
Abstract

With the surge in privacy-sensitive data from sources such as social media and IoT devices, there is a pressing need for formal, automated methods to assess privacy risks within these intricate systems. This paper formally investigates root sources of pairing-based privacy threats exploited using replay/relay techniques in wireless communication. Our research harnesses condition-oblivious responses, replay-resistance, and distance bounding measures vital for protocols utilizing shared keys in allowlists for authenticated reconnections. Particularly, the paper uses formal modeling of notable wireless networks, like the Wi-Fi P2P persistent group formation and the Bluetooth Low Energy reconnection procedure, to illustrate the root causes and countermeasures. Our model rigorously validates the proposed solution against association inference attacks, along with existing formalizations of well-authentication, frame opacity, and no-desynchronization. The ensuing analysis reveals not only uncharted privacy realms in wireless communication but also identifies old and new vulnerabilities. Our proposed design changes are acknowledged by Wi-Fi Alliance and Bluetooth SIG, paving the way for future advancements in resilient, privacy-preserving wireless protocols.

0.04

ESAU: Expeditious Swarm Remote Attestation for Pub-Sub IoT Networks with Untrusted Cloud-based Proxy Verifier

cs.CR ·2026-10-14 ·Ruei-Hau Hsu, Yu-Hsiang Hu, Rafael Kaliski, Tse-Yuan Yu
unusual similarity 0.45
Abstract · under submission to possible journal publications

As Internet of Things (IoT) devices collect and process data, security is essential. IoT devices often combine with other emerging technologies, such as artificial intelligence (AI) and fifth-generation (5G) communications, to support applications such as smart grids and internet-of-vehicles (IoV). Because IoT devices are deployed remotely, remote attestation (RA) effectively verifies each device's state. However, the scale of IoT deployments makes device management challenging for owners. Therefore, cloud-assisted IoT management services often provide RA solutions. Although cloud-based IoT services can securely manage IoT devices, passive malicious administrators or hacked IoT device owners' accounts can control IoT devices without cloud IoT service authorization. Therefore, this work proposes a cloud-assisted RA system that addresses three main challenges of IoT device RA: 1) lightweight RA design for resource-limited IoT devices, 2) unauthorized access to IoT devices by passive malicious administrators or compromised owner accounts on the cloud IoT management platform, and 3) RA may not extend to an authenticated key exchange protocol. In addition to proposing a swarm RA scheme that addresses these three challenges, this work analyzes the system's security properties and evaluates its feasibility through implementation and simulation.

0.24

AXON: A ROS 2 RMW with Shared-Memory/QUIC Transport and QKD/ML-KEM Key Establishment

cs.RO ·2026-09-09 ·Sergio Sánchez de la Fuente, Miguel Ángel González-Santamarta, Francisco Javier Rodríguez-Lera, Vicente Matellán Olivera, Ángel Manuel Guerrero-Higueras
similarity 0.45
Abstract · 8 pages, 1 figure, 1 table

Robot Operating System 2 (ROS 2) standardizes application code against a middleware interface (RMW) whose reference implementations are built on the Data Distribution Service (DDS). We present AXON, an alternative ROS 2 RMW implementation that separates transport policy by deployment scope. A Rust core and C++ adapter use POSIX shared-memory rings for same-host communication, QUIC for remote communication, and a daemon for discovery and graph synchronization. We then describe two fail-closed TLS 1.3 key-establishment configurations for remote traffic. The classic configuration offers only the hybrid X25519MLKEM768 group, preventing negotiation of a classical-only group. The qkd configuration imports a 256-bit key obtained through the ETSI GS QKD 014 API as a pairwise external PSK and offers no Diffie-Hellman group. Its default messages10 strategy additionally protects remote application messages with AES-256-GCM, rotating KME material after ten outgoing messages and using a fresh nonce per envelope; session relies on QUIC protection alone. The external-PSK path requires a narrow extension to rustls, now bundled with AXON. We define the threat model, distinguish peer authentication in the two configurations, and delimit the implementation-level validation from ROS 2 conformance, comparative performance, and physical-QKD validation.

0.17

A Connectionless Interaction Model for Network Spatial Proximity Services

cs.NI cs.HC ·2026-11-12 ·Artem Makarov, Dmitry Namiot
unusual similarity 0.44
Abstract

In this paper, we present a connectionless interaction model for network spatial proximity services. In the network spatial proximity model, the reception of an identification or discovery frame of a nearby wireless node confirms proximity and delivers content at the same time. Current Bluetooth and Wi-Fi specifications and mobile platforms extend this one-way announcement with responses, addressed messages, scheduled group exchange, and relaying, which still do not require a connection. The proposed model describes such interaction independently of a concrete wireless technology. It is based on the roles of nearby nodes, the proximity message as the unit of interaction, twelve pattern properties, and six interaction patterns: announcement, mutual announcement, query-response, addressed exchange, scheduled group exchange, and relay. An exit rule defines when a service should move to a connection-based channel. We analyze how the patterns can be implemented on Android and iOS smartphones through native mechanisms, substitution, composition, embedded bridges, or a step-up to a connection, and we propose a pattern selection method for developers. The model generalizes the earlier network spatial proximity model and refines the interaction primitives of the proximity core. It is illustrated by existing services and systems and supported by published measurements and first-order estimates.

0.26