CS Paper Radar

StructHCP: Structure-Aware SAT--CEGAR for the Hamiltonian Cycle Problem

Quan Van Vi, Tuyen Van Kieu, Khanh Van To

cs.LO ·submitted 2026-10-10 10:10 UTC · v1

Abstract

Many exact Hamiltonian-cycle solvers use the same edge-level representation for every input, even when graph structure admits a smaller set of global decisions. We present StructHCP, a SAT--CEGAR pipeline that selects a representation through inexpensive structural recognizers. Specialized searches handle high-degree clusters and paired chains, while complete directed and undirected encodings handle cubic and general graphs. Every returned cycle is reconstructed when necessary and verified in the input graph. On the 1,001-instance FHCP Challenge Set, StructHCP solves 826 instances, compared with 741 when the same general SAT--CEGAR engine is applied directly to every unreduced input graph. Relative to this ablation, StructHCP reduces PAR-2 by 32.9 percent. Formulation selection solves 82 more instances than the contracted general encoding; high-degree-cluster and cubic graphs account for 81 of this difference. StructHCP also solves 34 of the 51 instances solved by neither HCup nor Cut-set CEGAR, raising the combined coverage of the three solvers from 950 to 984. Twelve of its solutions lie outside the union of published per-instance SAT results analyzed here, and six also lie outside the published exact result sets in our comparison. These results show that selecting the representation can complement connectivity refinement on structured HCP instances.

Comment
9 pages, 2 figures, 5 tables

Closest papers

Nearest neighbours by meaning across the whole index.

SAQC: A SAT-Aware Compilation Framework for QAOA-Based Quantum Optimization

cs.ET quant-ph ·2026-09-04 ·Till Schnittka, Julie Maria Raju, Abhoy Kole, Rolf Drechsler
similarity 0.61
Abstract · 7 pages, 6 figures

The Quantum Approximate Optimization Algorithm (QAOA) is a promising variational approach for solving Boolean satisfiability (SAT) problems. Existing SAT-to-QAOA workflows first translate Boolean formulas into penalty Hamiltonians before applying generic quantum compilation, thereby discarding SAT-specific information such as clause structure, logical operators, and variable dependencies. Consequently, subsequent compiler optimizations cannot exploit the underlying Boolean formulation. This paper presents SAQC, a SAT-aware compilation framework that introduces a SAT Intermediate Representation (SIR) to preserve Boolean structure during compilation. The proposed framework supports both CNF and XOR-extended CNF (eCNF) formulations and performs SAT-aware optimizations including clause rewriting, dependency analysis, and clause scheduling prior to quantum lowering. Building on the optimized SIR, SAQC provides a unified framework for both penalty Hamiltonian generation and direct clause-to-ansatz synthesis, together with ansatz optimizations based on relative-phase decomposition, ancilla-assisted synthesis, and dynamic uncomputation. Experimental results demonstrate significant reductions in circuit depth, two-qubit gate count, and compilation time compared with conventional Hamiltonian-based workflows while remaining compatible with existing quantum compilation frameworks.

0.20

Real-to-Sim Generation: Synthesizing Scenario Programs from Real-World Data via Constraint Solving

cs.PL ·2026-09-20 ·Peishan Huang, Wenmeng Zhang, Yusen Chen, Zhenbang Chen
published similarity 0.60
Abstract · 31 pages, 4 figures, 4 tables. Accepted at OOPSLA 2026, to appear in PACMPL Vol. 10, No. OOPSLA2, Article 395 (DOI: 10.1145/3839527). This i…

The demand for synthetic training data is hindered by the sim-to-real gap, as current data-driven and LLM-based generators often produce physically implausible scenarios. To address this, we propose R2SGEN, a Real-to-Sim framework that synthesizes structured scenario programs from real-world data. To overcome the combinatorial explosion and intractability of monolithic Satisfiability Modulo Theories (SMT) encoding, we introduce a decoupled synthesis strategy. This approach separates the discrete structural program search from continuous geometric resolution using lightweight, atomic SMT constraints. Furthermore, we significantly accelerate the search process by integrating two tailored pruning mechanisms: Common Prefix Abstraction-based pruning for Breadth-First Search and Branch-and-Bound for Depth-First Search. We evaluate R2SGEN on 20 real-world scenes of varying complexity from the nuScenes dataset. Experimental results show that our method guarantees consistency with the input scene and produces substantially lower-cost programs than the LLM-based baselines under the evaluated inputs. Both proposed search paradigms exhibit complementary advantages, proving highly efficient and scalable for high-complexity synthetic data generation.

0.41

Compact Partial Symmetry Breaking for Graph Search Problems

cs.LO ·2026-09-18 ·Michael Codish, Mikoláš Janota, Peter J. Stuckey
similarity 0.59
Abstract

Symmetry breaking in graph search problems remains challenging: complete symmetry breaking constraints are typically exponential in size, while partial approaches trade precision for scalability. We introduce a strength-driven, redundancy-aware methodology for constructing compact partial symmetry breaking constraints based on graph patterns. Each pattern corresponds to a Boolean clause over equality literals and can be integrated directly into CP or SAT models. Our approach incrementally selects strong, non-redundant graph patterns, yielding partial symmetry breaks that achieve substantial pruning of non-canonical graphs while remaining compact in size. This provides a principled framework for deriving lightweight partial symmetry breaking constraints which are significantly more precise than all published state-of-the-art alternatives. We evaluate the proposed constraints on graph instances with up to 25 vertices using a redundancy ratio metric. The resulting partial symmetry breaks constitute only a small fraction of the size of complete symmetry breaking constraints, while delivering significant performance improvements across several graph search benchmarks compared to previously defined partial symmetry breaking methods.

0.24

Subsumption-Free Private-Pivot Learning in Resolvable Network-Based SAT Solving

cs.LO ·2026-09-28 ·Gábor Kusper
publishedtheory similarity 0.58
Abstract · In Proceedings FROM 2026, arXiv:2609.30324

A resolvable network is a directed-graph representation of SAT: every SAT instance can be translated into an RN, and every RN has an associated CNF formula. Each reach represents one clause. In a mixed reach, the head and tail are disjoint sets of variables containing the variables occurring negatively and positively in the clause, respectively; the distinguished symbols Source and Sink represent a missing negative- or positive-literal side. RN-Solver is a proof-of-concept SAT solver based on this representation. Its all-positive clauses are represented by white reaches, and its token distributions are the inclusion-minimal hitting sets of the current white tails, generated by monotone CNF-DNF dualization. RN-Solver learns new white reaches by private-pivot resolution, a structured resolution sequence that uses old white reaches as pivot witnesses. In the original algorithm, every candidate white reach generated by such a chain was followed by a global subsumption test against the current network. Profiling showed that this subsumption test can dominate the runtime on random 3-SAT instances. We show that this check is unnecessary when the mixed reach used for learning is falsified by the current token distribution, meaning that the distribution makes all variables in the head true and all variables in the tail false. The key invariant is simple: the resulting white tail is disjoint from the triggering token distribution, while the same distribution intersects every old white tail. Hence no old white reach can subsume the generated reach. This structural observation allows us to construct a simpler, snapshot-based, subsumption-free variant of RN-Solver, where each main-loop iteration uses a fixed set of old reaches and installs newly generated white reaches only at the end of the iteration. We prove soundness of the revised algorithm. Empirical evaluation confirms the elimination of the targeted checks: within an 8 second budget, snapshot/full-DNF solves 963 of 1,000 uf20-91 instances, compared with 724 for the original control flow. A separate 100-instance comparison identifies exact incremental DNF as the most effective of the three tested configurations.

0.36

Smallest Cubic Non-1-Planar Graphs

cs.CG math.COcs.DM ·2026-09-23 ·Sergey Pupyrev
similarity 0.57
Abstract

A graph is 1-planar if it has a drawing in which every edge is crossed at most once. We show that the smallest cubic non-1-planar graphs have $30$ vertices. Two such graphs are the Tutte-Coxeter graph of girth eight and a graph of girth seven that we call the Byte graph. Every subcubic graph with fewer than $30$ vertices is 1-planar. Our proof is computer-assisted, but directly testing all relevant graphs is impractical. To establish non-1-planarity of the two graphs, we extend a SAT-based solver with a custom clause propagator based on separating cycles and a case split based on graph automorphisms, allowing independent cases to be solved in parallel. To show that all smaller subcubic graphs are 1-planar, we introduce the concept of $k$-flexibility: every set of at most $k$ prescribed edges can remain uncrossed in some 1-planar drawing. We use this property to reconstruct 1-planar drawings of larger graphs from drawings of smaller $k$-flexible graphs. This replaces exhaustive testing of more than forty billion cubic graphs with computations on far fewer graphs of smaller order.

0.28

GraphVQ: Structure-Aware Autoregressive Decoding over Context-Quantized Graph Tokens

cs.LG ·2026-09-29 ·Yuxiang Yao, Zijun Zhao
similarity 0.56
Abstract

Graph foundation models need a discrete token representation, but casting a graph as a generatable token sequence faces a structural obstacle: edges spanning beyond the serialization window cannot be emitted in one pass--so one-pass autoregressive generators systematically under-produce cycles--and a single global condition cannot tell candidate edges apart. GraphVQ removes both obstacles: node contexts--features plus a local edge mask under multi-order breadth-first serialization--are quantized into a shared codebook by a VQ-VAE with BCE-calibrated Bernoulli edge decoding, and a second-stage structure-aware decoder emits the global adjacency conditioned on token-derived pair features, whose necessity over any global-summary condition is formalized in a scoped impossibility result. The tokenizer reconstructs node features at 0.86--0.99 accuracy and decodes local edges at AUROC >= 0.89 (ECE <= 0.007). Under one same-split protocol on four datasets, pair conditioning improves orbit MMD 0.248 -> 0.174 on PROTEINS and 3.4x on a ring stress test, and vanishes on a random-label control--the signature of attribute--topology coupling--so the gain is claimed exactly where attributes carry edge-relevant signal. GraphVQ ranks first among learned generators on PROTEINS, ties for first on SYN-COMM, and improves orbit MMD 2.7--17x over one-stage generation on three datasets, with seed-level bootstrap intervals confirming the rankings are not seed noise; on MUTAG the unweighted edge target under-generates and is reported as such. These results locate the structural control of autoregressive graph generation in the granularity of the condition: pair-level token context turns a quantized vocabulary into a usable capacity axis for distribution-faithful graph generation and future token-level pretraining.

0.37

Geometric Graph Representations via Compact SAT Encodings

cs.CG cs.DMcs.DScs.LO+1 ·2026-10-15 ·L. Sunil Chandran, Rishikesh Gajjala, Suraj Kumar Sahoo, Aatman Supkar
publishedtheory similarity 0.56
Abstract · To appear in ALENEX 2027

We present compact SAT encodings and certifying exact solvers for boxicity and cubicity. The boxicity of a graph is the minimum dimension in which it is the intersection graph of axis-aligned boxes; cubicity is defined analogously using unit cubes. Grid-based formulations face a geometric discretization bottleneck, growing rapidly with the target dimension. We avoid this bottleneck by encoding the total order of interval endpoints in each coordinate. For an $n$-vertex graph and target dimension $d$, our boxicity encoding uses $O(n^2d)$ variables and $O(n^3d)$ clauses, both linear in $d$. Requiring the left- and right-endpoint orders to agree yields a cubicity encoding of the same asymptotic size. Satisfying models are decoded into independently checked geometric representations, while unsatisfiable instances used as lower-bound evidence carry mechanically verified DRAT certificates. In a controlled evaluation with 186 trials per encoding on standard and structured graph families, the order encoding solves 96.8% of trials, compared with 71.0% for the known grid formulation, and reduces mean PAR-2 time from 178.21 to 21.70 seconds. The pipeline also certifies exact values for several named graphs. We turn one such value into a reusable obstruction by proving that every Kneser graph $K(n,k)$ with $k\ge3$ and $n\ge2k+1$ contains an induced Desargues graph. The resulting lower bound, together with an explicit three-dimensional representation of $K(7,3)$, establishes $\operatorname{boxicity}(K(7,3))=3$. This disproves the conjecture of Caoduro and Sebo that $\operatorname{boxicity}(K(n,k))=n-k$ for all $k\ge3$ and $n\ge2k+1$.

0.59

Improved Deterministic Algorithms for $k$-SAT: Generalization of Chains and Recurrence Proof

cs.DS ·2026-11-12 ·Binbin Cui, S. Cliff Liu, Yongrui Yu
similarity 0.56
Abstract

We present a deterministic algorithm for 3-SAT running in $1.32736^n$ time. The algorithm is built on a branching-and-chain framework augmented with a polynomial-time expansion procedure that joins short chains through additional clauses to form bounded-size blocks, which impose stronger constraints on the assignment space. After branching, the algorithm chooses between derandomized local search guided by the block structure and enumeration of block assignments together with selected port variables, reducing the remaining formula to 2-SAT. A weighted analysis of branching, partial-assignment, and local-search costs, together with inductive bounds for chains and block interactions, establishes the running-time guarantee. The framework is self-contained and also offers guidance for practical SAT solver design by identifying useful clause-overlap structures and suggesting when to switch between local-search and reduction-based strategies.

0.27