CS Paper Radar

Fewer Bits, More Tries: Recovering Capability Under Memory Constraints

Tomer Galanti, Josh Susskind, Eran Malach

cs.AI ·submitted 2026-10-11 05:52 UTC · v1

Abstract

Large language models are generally more capable than smaller ones, but their memory requirements can make local deployment difficult. We ask whether part of this capability gap can instead be recovered by running a smaller or more compressed model multiple times and selecting among its outputs using public or model-generated tests. Single-user local inference can leave hardware underutilized, allowing parallel candidate generation to trade additional test-time computation for accuracy at modest latency cost. Across four code-generation benchmarks, verified retry recovers substantial accuracy lost to model size or compression. A 7B Qwen model with eight parallel attempts essentially matches a 32B model on MBPP+ and exceeds it on the other three benchmarks, while using about $4\times$ less model memory, running up to $6\times$ faster, and using less energy, as measured on Nvidia GPU. We observe similar tradeoff across model sizes, compression levels and hardware choices, although exact benefit depends on the hardware profile and problem setting. These results show that model capacity can be traded for verified test-time computation when correct solutions remain reachable within a modest retry budget.

Closest papers

Nearest neighbours by meaning across the whole index.

Reproducible LLM Inference Benchmarking: A Sequential Isolation Protocol for Regression Testing

cs.PF cs.LG ·2026-10-07 ·Arnold Olympio, Juan Manuel Servera Bondroit, Wael Abdelmalek, Guang Lu, João Carvalho
benchmarkcode/data similarity 0.72
Abstract

Reproducible benchmarking of Large Language Model (LLM) inference is challenging because repeated measurements can vary with execution and system state. We present the Sequential Isolation Methodology, a controlled benchmarking and regression-testing protocol designed to reduce between-run measurement variance while deliberately varying workload concurrency. We evaluate three representative open-source LLMs on an NVIDIA A100 80GB GPU using vLLM 0.9.1 across six context sizes and eight concurrency levels, with five repetitions per configuration. The final protocol reduces average coefficient of variation (CV) from 15.2% in the least controlled methodology stage to 2.2% under the final protocol; using CV computed across the five repetition-level median (P50) TTFT values per configuration, 113 of 144 configurations (78.5%) achieve CV below 3%. The measurements also show a marked latency transition between 200 and 500 concurrent users on the tested stack and descriptive differences in P99 latency across the three models. We additionally provide an explicit cost break-even model with sensitivity to API pricing. The protocol is intended to provide a stable reference for reproducible comparison and regression testing rather than to predict absolute behavior under uncontrolled production traffic. Infrastructure-as-Code and benchmark scripts support replication of the experimental environment.

0.25

Local Inference of LLMs on Long Contexts: A Data Systems Perspective

cs.DB cs.AI ·2026-10-20 ·Mattias Dürrmeier, Alberto Lerner
similarity 0.72
Abstract

Large language models can solve complex problems across a variety of subjects, such as mathematics and coding. For such complex analytical tasks, models with a long context perform better. Serving models with long context is currently mostly done on powerful systems with multiple GPUs, which are too expensive for most users. An alternative is local inference, or serving a model on a user's own machine, which removes per-token costs and rate limits, besides keeping sensitive data private and giving users full control over the models they run. The common understanding, however, is that local LLMs need compression (e.g., quantization) to run on a single GPU. In this paper, we set out to study the limitations that prevent serving long-context models for single users, besides the capacity issue. Rather than characterizing a single model on one GPU, we analyze how different models behave across several GPU generations. This lets us uncover not just individual bottlenecks but broader trends in where inefficiencies arise. Our analysis confirms that, as expected, self-attention dominates the runtime for long-context inference. More unexpectedly, our evaluation reveals that the current structure of self-attention leaves key GPU resources significantly underutilized, and the newest GPU is often the least well served. Many of these findings are fundamentally data management problems, from paging the KV cache to improving cache utilization and synchronization in the GPU, which is why we bring this study to the Data Systems community. To engage this community, we present our findings as a series of experimental observations and formulate recommendations for future work.

0.10

Budget-Aware Compression Pipeline for Single-GPU LLM Inference: Methods, Trade-offs, and Coupling Effects

cs.CL ·2026-08-30 ·Hongyu Yu, Yifei Shen
similarity 0.70
Abstract · Accepted by GroundLM 2026 (EMNLP 2026 Workshop)

Single-GPU deployment of 70B-parameter language models on an NVIDIA GPU is constrained by device memory, long-context throughput, and engineering integration cost. We cast single-GPU inference as a budget-aware design problem over these three axes and study how pruning, quantization, and KV-cache compression interact under realistic execution. Controlled ablations show that layer-wise pruning makes weight quantization more robust. KV-cache sparsification complements INT8 KV quantization by reducing memory without hurting decoding speed, while static vector quantizers often conflict with dynamic caching. Guided by these coupling results and explicit budget tracking, we assembled a practical pipeline and compressed a 70B model to about 33 GB, sustained about 57 tokens/s on 10k token prompts on a single A40, and kept absolute accuracy within 5% on common and reasoning benchmarks. We contribute design rules and a reproducible evaluation protocol that jointly report quality, memory, and end-to-end speed, and we provide a foundation for automated pipeline search under realistic single-GPU constraints.

0.14

Beneath the Tokens: A Performance Engineering Study of Multi-Token Prediction in GPU-Accelerated LLM Inference

cs.AI cs.PF ·2026-09-28 ·Suwesh Prasad Sah
benchmark similarity 0.69
Abstract

Autoregressive large language model inference repeatedly invokes the target model to generate one token at a time, making generation sensitive to GPU memory movement and sequential execution. This study evaluates two-token multi-token prediction (MTP) against autoregressive decoding in a controlled single-request deployment on an NVIDIA A10G GPU. A 360-request benchmark covered plain-text, reasoning-intensive, and tool-calling workloads, while runtime telemetry, Nsight Systems, PyTorch Profiler, and selected Nsight Compute measurements were used to explain the observed performance. MTP increased output throughput by \(1.91\times\) to \(2.19\times\) across all prompts and reduced time to first output by 10.0--14.2\%. Median mean acceptance length ranged from 2.370 to 2.595 tokens per verification iteration. Profiling showed that MTP introduced a longer and more complex execution path, including proposal, sampling, attention, gathering, and reduction operations. However, it required 56.4--78.1\% fewer executions of the selected repeating CUDA Graph per generated token. The dominant MTP GEMM kernel was not faster than the dominant autoregressive GEMV kernel, and selected instances of both approached the A10G memory-bandwidth limit. These results show that MTP improved inference through amortization: greater token progress reduced repeated GPU execution sufficiently to outweigh the additional speculative-execution cost.

0.13

The Cost of Context: Profiling the Energy Footprint of Input Tokens in Large Language Models

cs.DC ·2026-10-14 ·Boris Ruf, Marcin Detyniecki
similarity 0.69
Abstract · Accepted at HotCarbon'26, the 5th Workshop on Sustainable Computer Systems; to appear in ACM SIGENERGY Energy Informatics Review, Vol. 6, Is…

The rapid adoption of Retrieval-Augmented Generation (RAG) and long-context LLMs has shifted the computational burden toward the prefill phase---the initial stage where the model processes all input tokens in parallel before generating a response---yet its energy impact remains poorly characterised. We investigate the contradiction between massive hardware-level power spikes and the sub-linear marginal cost of input tokens reported in system-level studies. Through high-resolution telemetry of Llama-3.1 and Qwen-2 models on NVIDIA A100 hardware, we identify the efficiency threshold where $O(n^2)$ attention complexity overcomes GPU parallelisation. Our results quantify how optimised memory orchestration (PagedAttention) delays this scaling bottleneck across three orders of context scaling, yielding up to an 8.9$\times$ energy efficiency advantage at 112,000 tokens compared to standard baselines. Furthermore, we characterise the energy disparity between input and output tokens, demonstrating that optimised serving (vLLM) causes this ratio to narrow (from $\approx$850$\times$ to 750$\times$) as context scales due to high decode efficiency, whereas unoptimised baselines show a much smaller, roughly constant gap ($\approx$150--230$\times$) because their prefill is itself expensive. This work establishes context-scaling laws that differentiate engine-level optimisations from inherent model constraints, providing an empirical framework for sustainable LLM deployment.

0.47

SpecSearch: Towards Hardware-Aware Efficient Speculative Decoding

cs.AI cs.DC ·2026-11-17 ·Selin Yildirim, Ali Zeyrek, Deming Chen
similarity 0.67
Abstract

Speculative decoding (SD) accelerates large language model (LLM) inference, but its optimal configuration depends jointly on workload characteristics, GPU hardware, and available memory. For example, on the RTX~5090, the state-of-the-art speculative drafter DFlash achieves $3.50\times$ the throughput of autoregressive (AR) decoding at low concurrency, but only $0.76\times$ at high concurrency with short outputs. We present SpecSearch, a hardware-aware search engine that jointly optimizes decoding strategy, draft length, and precision across workload--GPU pairs. Its analytical cost model captures memory and compute constraints to identify feasible configurations and narrow the search space for throughput optimization. Guided by this model, calibration measurements are collected from multiple GPUs. Using the measurements, a Jev-based predictor learns to select high-throughput decoding configurations on held-out GPUs without requiring deployment-GPU calibration. The predictor is parameter-efficiently trained on calibration data, while adapting a frozen Qwen3-4B using LoRA adapters and a linear correction layer. Across NVIDIA RTX~5090, H100, L40 and AMD MI300X GPUs, SpecSearch with full calibration achieves an average of $2.01\times$ the throughput of AR and $1.36\times$ the throughput of SD, both served by vLLM. The proposed Jev-based predictor closely matches this search performance with $1.30\times$ throughput improvement over SD with vLLM, while eliminating the need for held-out GPU calibration. Additionally, it retains $97.36\%$ of the throughput achieved by SpecSearch that utilizes full calibration.

0.19

Green Code or Costly Code? Evaluating the Energy Costs of Iterative LLM-Based Code Optimizations

cs.SE cs.AI ·2026-10-23 ·Sadra Emami, Benjamin Weigell, Mohammad Reza Mousavi, Gunel Jahangirova, Hugo Araujo +1 more
top venuebenchmarkcode/data similarity 0.67
Abstract · Accepted at the 49th IEEE/ACM International Conference on Software Engineering (ICSE 2027)

Large Language Models (LLMs) are increasingly used to optimize code for performance. This practice often assumes that improvements in execution speed naturally translate into overall lower energy consumption. We challenge this assumption empirically by measuring whether performance-optimized code produced by LLM self-refinement pipelines is also energy-efficient relative to canonical human reference solutions, and whether the energy cost of the optimization process can be offset by subsequent execution-time savings. We evaluate 11 open-source models across four decoding configurations on all 1,000 problems of EffiBench, a state-of-the-art performance benchmark, while collecting per-process, hardware-level energy measurements throughout. Inference energy spans 0.79 to 8.68 MJ across model-variant pairs, which is roughly equivalent to the energy of 250 to 2800 GPT-4.1 queries. Limiting the maximum number of output tokens has the largest impact, reducing energy use by up to 69% compared to the default configuration. On the execution side, 42 of 44 configurations produce code that consumes more energy per problem than the canonical human reference, with overheads ranging from +4% to +886%. The two exceptions achieve only marginal gains, with break-even points on the order of 10^6 to 10^7 executions. Mixture-of-Experts architectures consume substantially less inference energy than equivalently-sized dense models without sacrificing correctness, making architectural choice a more consequential sustainability lever than decoding parameters. Performance optimization and energy efficiency are not always aligned goals: LLM self-refinement consistently produces faster-seeking but energy-heavier code relative to what a human engineer would write. All artifacts are available at https://doi.org/10.5281/zenodo.23598170.

0.41

SparPR: Runtime KV-Cache Recovery for Resource-Constrained LLM Inference on Consumer Hardware

cs.CL ·2026-10-13 ·Jieyun Deng, Keming Hu, Yanghe Liu, Li Feng
similarity 0.67
Abstract · 9 pages, 5 tables, 1 figure

Running large language models (LLMs) on consumer hardware is bottlenecked by the key-value (KV) cache, which grows with every decoded token and quickly exhausts the memory and bandwidth of a single consumer GPU. We present SparPR (Sparse Partial Recomputation), a runtime KV-cache recovery mechanism that does not modify model weights and requires no offline training. SparPR couples three online decisions: Query-Aware key-block selection scores historical blocks against the current query; dynamic budget control estimates per-block copy and recompute costs to decide how many blocks to retain; and on-demand local recomputation with cost-aware fallback merges retained blocks into continuous spans and switches between sparse recomputation and full recovery according to a runtime cost comparison. Implemented on FlexGen/FlexLLMGen, SparPR is evaluated on a single consumer laptop (RTX 3070 Ti 8GB, Ryzen 9 6900HX, 16GB RAM). It cuts end-to-end latency by 31%, 52%, and 63% at 1k, 2k, and 4k prompt tokens respectively, with 1.4x-2.7x higher throughput, and completes an 8k-token workload in 44 minutes where the FlexGen baseline times out. Under a fixed cache budget, SparPR retains a Needle Accuracy that stays well above StreamingLLM and H2O at every keep ratio, and ablation studies confirm that the three mechanisms act jointly.

0.19