CS Paper Radar

Stateless Stochastic Computing for Generative AI on Superconducting Logic: A Model-Hardware Co-Design

Mehdi Kamal, Massoud Pedram

cs.AR cs.ET ·submitted 2026-10-11 06:42 UTC · v1

Abstract

Thermodynamic computing lets stochastic physical dynamics carry out a computation and reads out the result as a time average. Recently, thermodynamic computing has been demonstrated on several hardware platforms, including digital CMOS circuits based on stochastic computing. Superconducting single-flux-quantum (SFQ) logic offers very high clock rates and very low switching energy, but it heavily penalizes state, memory, fan-out, and feedback, i.e., exactly the per-neuron accumulators on which such designs rely. We therefore realize thermodynamic computing in SFQ logic through a co-design of a generative model and its circuit in which the datapath holds no state at all. The model is a class-conditional flow-matching image generator, which transforms Gaussian noise into an image of the requested class along a short, deterministic path of four Euler steps; in hardware, these steps are unrolled into a feed-forward pipeline of stochastic bitstream operators, whose output is read out as a time average, as in thermodynamic computing, without any relaxation phase. Each layer of the model is a butterfly-factorized linear map built exclusively from multiplexers that operate on split-unipolar bitstreams. The ReLU activation, which in stochastic computing requires a per-neuron up/down counter (accounting for 60-70% of the JJs in a counter-based design), is replaced by a stateless AND-NOT gate whose one-clock input skew is provided at no cost by SFQ gate-level pipelining. The models are trained directly on the stream representation of the hardware, with a regularizer that bounds the stream gains. Synthesis with an SFQ design flow shows that stochastic streams tolerate relaxed path balancing, which reduces the Josephson-junction (JJ) count of a hard-wired stage by 40-47%.

Closest papers

Nearest neighbours by meaning across the whole index.

Conditional Dynamical Systems for Image Generation

cs.ET ·2026-08-15 ·Lianlong Sun, Chuan Liu, Yongchao Liu, Hui Wu, Tony +2 more
similarity 0.65
Abstract

Image generation is dominated by deep generative models on GPUs, whose computational and energy costs raise sustainability concerns. Emerging non-von Neumann substrates, including quantum, compute-in-memory, photonic, and thermodynamic platforms, promise greater efficiency, yet most work ports conventional neural network architectures onto them and mainly accelerates operations such as matrix multiplication. This does not fully exploit a native capability of many hardware substrates: relaxation toward low-energy states can itself compute at little cost. Building on this primitive, we develop dynamical systems for image generation based on Ising spins and Kuramoto oscillators. The internal states of both models evolve under dynamics with an explicit Lyapunov energy, and a compact decoder renders the final states as images. For conditional generation, we introduce local conditioning: programmed interactions remain fixed, and one class-dependent bias per node reshapes the landscape, avoiding additional reprogramming and calibration costs. On CIFAR-10, the Ising and Kuramoto models reach clean-FID scores of $6.40$ and $5.37$, respectively, with $4096$ nodes. With a CMOS-compatible hardware realization, the dynamical-system core is projected to cost ${\sim}110.6$~nJ per image, and the full computation, even with the decoder on a GPU, outperforms all GPU baselines in latency and energy. These results suggest that energy-descending dynamics on non-von Neumann substrates can serve as generative computation, offering an efficient path beyond GPUs.

0.36

Bio-inspired Learning and Decision-Making with Probabilistic In-Memory Computing Hardware: Part 2

cs.AR ·2026-09-10 ·Thomas Dalgaty, Eiji Kawasaki, Miguel de Prado, Tommaso Salvatori, Germain Haugou +1 more
similarity 0.62
Abstract

This report extends our previous work (Part 1), which introduced an energy-based model for learning and decision-making under uncertainty. The model leverages stochastic Langevin dynamics to continuously evolve approximate probability distributions over neuron states and model weights. However, as noted in Part 1 and confirmed through GPU-based implementations, large-scale probabilistic energy-based models of this nature face significant scalability challenges due to excessive execution latency. This latency stems from a fundamental mismatch: massively parallel models with low arithmetic intensity (such as energy-based models) are being executed on processor architectures like GPUs that rely on high-bandwidth memory (HBM) interfaces. The HBM imposes brutally sequential execution constraints on inherently parallelizable models, creating the false impression that such models are unscalable. In reality, it is the GPU architecture itself, with its dependence on HBM interfaces, that is not a scalable processor architecture for this class of AI model. In this report, we demonstrate using a detailed transaction-level model (TLM) of a probabilistic analogue in-memory computing (AIMC) processor that the same energy-based model can execute well over 1000x faster than data-center-grade hardware by eliminating the HBM interface and performing computation directly within on-chip memory.

0.11

FALCON: Fault-Tolerant Magnetic Tunnel Junction-Based In-Memory Stochastic Architecture for Reliability-Critical Edge AI Applications

cs.ET cs.AReess.IV ·2026-09-01 ·Farzad Razi, Mehran Moghadam, Sercan Aygun, M. Hassan Najafi, Marc Riedel
similarity 0.61
Abstract

As modern data-centric applications such as neural inference and sensor-edge analytics expand, they increasingly encounter the von Neumann memory wall, suffering from excessive data movement overhead and stringent energy constraints. In-Memory Computing (IMC) utilizing emerging non-volatile technologies, such as Magnetic Tunnel Junctions (MTJs), promises to mitigate these bottlenecks. However, conventional binary radix-based IMC architectures suffer from excessive vulnerability to process-induced variations, restricted operating margins, and thermal noise. To bridge the gap between energy efficiency and computational reliability, this work proposes FALCON, a fault-tolerant, MTJ-based in-memory arithmetic architecture integrated with Stochastic Computing (SC). By encoding numerical values into uniform bit-streams, SC naturally absorbs localized soft errors and enables the execution of an essential suite of arithmetic operations using highly compact logic primitives directly within the memory arrays. FALCON integrates a deterministic bit mapping mechanism with reconfigurable logic-in-memory (LIM) structures, eliminating the need to transfer data to external processors or area- and power-hungry random number generators. Experimental results using 14 nm FinFET technology validate the correct functionality of FALCON even under aggressive voltage scaling, severe process variation, and noise injection levels up to 30%, making it a robust framework for reliability-critical edge AI applications. We investigate the proper functionality of FALCON on morphological closing as a realistic noise-tolerant image processing case study.

0.36

Quantum MeanFlow: single-shot generative sampling on NISQ hardware

cs.LG quant-ph ·2026-09-02 ·Ashish Joshi, Eshaan Mistry, Takahiko Koyama
benchmark similarity 0.60
Abstract · 17 pages, 6 figures

Quantum generative models offer a promising framework for exploring whether quantum computation can enhance generative machine learning. Flow matching is a generative method in which samples are generated by transporting a simple, known distribution to the target data distribution with a learned velocity field. Its quantum counterpart, known as quantum flow matching (QFM), was introduced recently, and, like its classical counterpart, requires integrating an ordinary differential equation over many time steps during inference. As each step requires the output from the previous step, the circuit submission is sequential and a drawback on quantum computers as they have high input/output costs. To alleviate this problem, we introduce Quantum MeanFlow (QMF), the quantum analogue of the MeanFlow formulation, which allows single-step sample generation. While the QFM learns an instantaneous velocity field at each time step, QMF learns the average velocity over a time interval. We use a parameterized quantum circuit to learn these velocity fields and benchmark the two methods on the MNIST dataset. We show that while single-step QMF has lower image quality compared to multi-step QFM, it performs better than the single-step QFM sampling at every shot count. Both of our models are executed on IBM quantum computers and best-of-N rejection sampling recovers most of the accuracy lost to device noise without modifying the circuit. This is especially advantageous for QMF which has only one circuit evaluation per image. Here, We establish QMF as a viable method for single-step quantum generative sampling, saving on quantum circuit evaluations per generated sample.

0.28

Real-Time Recurrent Qubit-State Discrimination on a Heterogeneous AI-Engine-FPGA Accelerator

cs.AR ·2026-10-24 ·Vu Le, Yilun Xu, Neel Vora, Gang Huang, Deepak Ganesan +1 more
similarity 0.59
Abstract · 16 pages, 15 figures, Preprint updated with minor changes in the ack section

Qubit readout, or qubit state discrimination, remains one of the slowest and most error-prone operations in superconducting quantum processors, making fast, accurate, and hardware-efficient classification essential for scalable quantum computing. Conventional discriminators integrate the I/Q record into a single point, discarding evidence a relaxing qubit leaves behind; full-resolution feed-forward classifiers recover it but are too costly to deploy under this constraint. Recurrent classifiers retain full resolution far more cheaply, but their loop-carried hidden state cannot fit a single AI Engine (AIE) tile's register capacity and spills to data memory, adding latency that grows with sequence length. We present a hardware-aware LSTM accelerator for an AMD Versal device that resolves this by partitioning at the dependency boundary - independent input projections on the AIE array, the loop-carried update in programmable logic (PL) - keeping pace with a 64 ns input cadence under a 1,000 ns budget. On the qubit affected by mid-readout state transitions, our design matches a full-resolution feed-forward network's accuracy (96.59% vs. 96.37%) using 403x fewer parameters and roughly 103x fewer DSPs while cutting relative error by 68.2% over GMM, 43.6% over QubiCML, and 16.82% over MF-NN. Using 4 out of 400 AIE tiles and 17 DSP58, it needs 2.2-8.2x fewer DSP58 blocks than QubiCML and MF-NN, and the AIE-PL partition cuts exposed tail latency by 60.3% versus a pure-AIE mapping and DSP58 usage 31.1x versus an all-PL implementation. Across eight qubits, a compact variant reaches 96.78% mean accuracy, the strongest hardware-deployed operating point. Temporal resolution and recurrent-state placement must then be treated jointly when designing low-latency quantum readout accelerators.

0.16

Spiking neural networks for streaming qubit readout

cs.NE quant-ph ·2026-10-01 ·Barry M. Dillon, Aqib Javed, Jim Harkin, Patryk Dabkowski, Benjamin Lienhard
similarity 0.59
Abstract · 25 pages, 9 figures, 6 tables

Fast and accurate qubit-state assignment is essential for feedback, calibration, and error correction in quantum processors. In superconducting platforms, frequency-multiplexed readout makes this task intrinsically multivariate as measured traces can encode crosstalk, qubit-state relaxation events, and other transient nonidealities that are not fully captured by conventional matched filtering. Here, we introduce spiking neural network (SNN) discriminators for superconducting qubit readout. By processing the measurement window in successive time chunks, the networks exploit temporal structure and update classification scores as data arrive, rather than waiting until the end of the readout window. The spiking networks outperform matched-filter discrimination and approach the accuracy of a full-trace artificial neural network. Beyond reaching the performance of artificial neural networks, the key advantage of SNNs is that they provide a streaming, time-resolved estimate of the qubit state that evolves as the readout signal is acquired. Using quantisation-aware training and hls4ml synthesis, we further demonstrate that each FPGA inference update can be completed before the next readout chunk arrives. These results establish spiking neural networks as a promising route to low-latency, real-time qubit readout on FPGA hardware, with broader implications for time-critical quantum-control and scientific-inference applications.

0.22

PotentialEP: Backprop-Free Training of CIFAR-Scale Generative Models via Equilibrium Propagation

cs.LG cs.ETcs.NE ·2026-10-10 ·Alex Gower
theorycode/data similarity 0.59
Abstract · Code: github.com/alexgower/PotentialEP

Generating an image with a diffusion or flow-matching model typically involves integrating a velocity field for hundreds of sequential steps. That computation suits a GPU poorly and an analog neuromorphic substrate well, where one fast, low-power physical relaxation could replace the whole sequence. Two things are needed: a generative algorithm whose computation is a relaxation, and a way to train it without backpropagation, whose global gradient transport is hard to realise in analog. Energy Matching supplies the first, sampling by gradient-descent relaxation on a time-independent potential - but obtaining the gradient that descent follows is itself a backward pass, once per integration step. We prove that a predictive coding network with a single linear injection term added to its energy relaxes to a state whose visible layer carries that gradient inherently, with an error that vanishes for small injection strengths. An Energy Matching model trained by backpropagation can therefore be loaded into this network unchanged and sampled by relaxation alone, matching the original model's FID to within 0.04 at CIFAR-10 and ImageNet-32 scale. The network can also be trained without backpropagation: Equilibrium Propagation reproduces backpropagation's parameter updates to a cosine similarity of 0.9998, and training end to end with those updates reaches an FID of 3.64 on unconditional CIFAR-10 against 3.54 for backpropagation. To our knowledge this is the first CIFAR-10 generative model trained with Equilibrium Propagation, and the first at competitive quality by any backpropagation-free rule. This quality does not require group normalisation or attention: an architecture of only convolutions and pointwise nonlinearities, both native to an analog crossbar, reaches an FID of 3.51 when trained by backpropagation.

0.43

Architecting Instruction Execution for Scalable Fault-Tolerant Quantum Computing

cs.ET quant-ph ·2026-10-12 ·Dmitry Filippov, Justin Hogaboam, Mathias Soeken, Raghu Gatta, Prakash Murali +1 more
published similarity 0.58
Abstract · Published in IISWC 2026

Scaling fault-tolerant quantum computing (FTQC) requires orchestrating millions of operations continuously across a tightly coupled classical-quantum control stack. A critical challenge in this orchestration is determining the optimal hardware-software boundary, i.e., the Quantum Instruction Set Architecture (QISA). We focus on cryogenic, fixed-connectivity qubit platforms, such as superconducting and topological Majorana qubits. For these, existing QISA choices either operate at too low a level, violating cryogenic thermal budgets at scale, or at too high a level, imposing unrealizable complexity on the control engine. To reason about these tradeoffs, we introduce the ARIES instruction set hierarchy, which categorizes QISAs into distinct abstraction levels. To systematically evaluate these levels, we develop an end-to-end evaluation toolflow featuring a cycle-accurate classical driver and hardware engine simulator. Using eight quantum applications across superconducting and topological qubit platforms, we measure instruction bandwidth, transceiver power dissipation, and measurement processing overheads. We demonstrate that while physical-level abstractions exceed the thermal limits of dilution refrigerators by orders of magnitude, canonical-level abstractions significantly underestimate hardware routing congestion and execution runtimes. Our Level 4 QISA (local logical operations) offers an optimal architectural balance. As quantum hardware platforms scale toward FTQC in the coming years, our findings provide concrete architectural guidance for the design of their classical control stacks and instruction interfaces.

0.24